Unable To Connect To The Modem With Windows 7 X64?
Sep 29, 2011
Since 2 days I can't connect to the modem with my desktop pc(windows 7 x64). I get APIPA as IP adress(169.254.*.*). Tho I can go on internet with my notebook with the same cable I use for my desktop PC.I've also tried direct connection with the modem but it did not work aswell.
What I've done but without success:restore pc (1week)
winsock fix
reinstalling networkcard, then upgraded it
played with networkcard speed(full/half duplex), manipulating mac address
tried static IP
[URL]
View 10 Replies
ADVERTISEMENT
Aug 28, 2011
I am having problems connecting to the internet. It has never done this and just started a week ago. I contacted my ISP and they told me it is not the modems fault. I have a modem and then it goes to a Trendnet 100mpbs Ethernet Switch. Then it goes to my primary computer and then to my laptop. They are all hard-wires. I contacted Acer and they said it wasn't a problem with the computer. When I look at the control panel it says "Unidentified Network" and has no other information than that. I already attempted to manually put in the IP I should be receiving from the modem, but that did not work either.
View 8 Replies
View Related
Apr 25, 2011
I have 2 computers and 1 printer connected to the dsl modem and another computer and 2 printers connected to a router, I have internet connection to all. the problem I am having is I am trying to add 2 of the printers that are on the router to my pc's but I am unable to locate them also I am unable to log into my router through one of the computers that is connected to my modem directly but I can connect to my router with the pc connected directly to the router.
All the printers are set to share. Is the only way to do this is to connect all the printers to the main PC and then network all the pc's together? I am just trying to connect to all the printers that are on modem and router from any of the pc's connected to modem and router.
View 4 Replies
View Related
Mar 24, 2012
I have a problem with a talk talk dsl 2680modem or the connection? Everything worked fine until I did a facory reset on the pc (running xp),when I tried to install the talk talk internet from the cd, everything seemed fine with the wizard but no internet? the phone also has no dial tone? I am 99.9% sure it is not a problem in the area,I think its a setting problem with the setup.
View 1 Replies
View Related
Jan 4, 2011
I just got Comcast ISP and used my own Modem. It's a Webstar DPC2100 R2 Modem and I can connect just fine from Modem to my pc. However, when I add my Netgear WGR614 v6 router into the mix, I get no connection.
[code]...
View 7 Replies
View Related
Dec 28, 2012
I reset my Hybrid modem router's settings back to factory settings cause the disconnects were pissing me off.After a while, It disconnected. I tried reconnecting, but now it's only showing "No Internet access."
View 8 Replies
View Related
Feb 20, 2013
I have been using broadband in my laptop using asus wireless router/modem DSL-N10E for last 2 months but with Ethernet cable plugged in. I have never used its wifi function. I tried today but was unable to connect after entering security passwordWhen look for troubleshoot it says "There might be problem with the drivers for the wireless network connection adapters"
View 4 Replies
View Related
Feb 9, 2011
So I recently just built a new pc for gaming, I can't seem to connect to the internet through my router or directly through my modem. I have connected directly on my laptop and it works and through router and it works.
View 1 Replies
View Related
Oct 17, 2011
have a problem with connecting to my cable internet modem with my windows xp machine. My windows vista computer automatically connects as soon as you connect it to the modem but the windows xp machine gives the "limited or no connectivity" error when I try to connect. What could be causing it to work with vista and not xp? what can I try to make it work?
View 3 Replies
View Related
Jan 7, 2012
I have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.
View 2 Replies
View Related
Apr 30, 2011
I came home yesterday to find that I couldnt connect to the internet, I called my isp, and they said i'm receiving a full signal, but my computer just isn't communicating with my modem. The ip address is 0.0.0.0. Of course the isp can't do anything with this problem, and since my computer is past the warranty, neither can microsoft or hp (not for free anyways). The person at Qwest (isp) said I might have to "reset my netcard"
View 3 Replies
View Related
Nov 18, 2011
I have a Netgear DGN3500 wireless modem router that I'm trying to setup on my Dell desktop "Dimension C521". I get the error message "Ethernet adaptor required". I'm not sure why I am encountering the error message, as I have successfully installed a modem previously on the desktop via a ethernet cable.
View 1 Replies
View Related
Dec 4, 2011
I'm using a year-and-a-bit old Acer laptop, windows 7. I'm on a wireless network at home, but it keeps on disconnecting me. I always get this message:It'll continue giving this message for a few minutes, and if I'm lucky it will connect me againRestarting my computer/rebooting the router, turning everything off etc. doesn't work, and the windows diagnostic thingy doesn't come up with anything. None of the other computers in my house get this problem
View 1 Replies
View Related
Feb 13, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL
I am unable to connect my TP-Link TL-MR3220 router with BSNL EVDO ZTE AC8700 modem. Even though my router has the latest firmware version 3.14.2 Build 120822 Rel.57775n, which is the boxed firmware i got with my router. All the time my modem gets Identified by the router, then it shows connecting phase......and restarts the modem.........Repeats the same step every time I try to connect.
View 2 Replies
View Related
May 19, 2013
I am unable to connect a Wifi Modem wiith 2960 Switch having VLAN 1,Attached is the network diagram,what configurations i have to modified it,I need to Connect A Wifi Modem on VLAN 1 ,Connectivity is working fine between VLAN 10 and VLAN 1.What should be the next step to Connect Wifi Modem to VLAN 1 so that Users on VLAN 10 should connect to Internet.
View 14 Replies
View Related
Aug 22, 2012
I tried to connect inet with a DSL "Speed Modem 200" (no WLAN!, no router), RAS failure 651.
OS WIN7 Enterprise, SP 1, 64-Bit
It seems to be a driver problem of the LAN adapter, because under XP SP3 on the old PC ervery thing is fine.The driver test told me "newest version" what's to do?
View 2 Replies
View Related
Mar 1, 2012
Basically my desktop computer no longer connects to the internet, and I'll try to describe the problem to you all to the best of my ability.I ran ipconfig /all and it is attached.The problem first started a few weeks back and I haven't been able to get around to it due to school. When trying to connect to my router it will connect with limited connectivity (in other words, at the bottom right of the screen when you check the SSID you're connected to, it will show the signal strength, but it also has a yellow exclamation mark indicating it has no connectivity. When I ran the built-in troubleshooter on it, I received multiple things:
- sometimes: "windows could not automatically detect this network proxy settings"
- sometimes: "no errors detected"
Of course I would've done a system restore long ago,however initially I thought the problem was the adapter so I kept re-installing the drivers, I even went to buy other network adapters to make sure my adapter wasn't the one that was defective (I have an ASUS adapter, the other adapters I've tried were D-Link, and Netgear which is also the brand of my router which is very old). Because of all these installs/uninstalls, the old system restores I had were gone. I have Windows 7 64 bit, I'm using wireless connectivity and cannot try ethernet cable due to the immobility of my desktop and problems it would generate around the house. I've attempted to change the IP address of my network properties of ivp4 to defaults, change the DNS server, check my DHCP, check my services, check my registry, and many other things found on the internet (including resetting with netsh)
View 19 Replies
View Related
Dec 1, 2011
So, my computer was having some serious issues, but the internet worked just fine. Me and a friend live in the same building and we're sharing a wireless connection and splitting the cost. I had to reformat my computer (it was windows XP SP3), but when I reinstalled windows it's SP2. I installed the wireless drivers and such, and those work great. However, I try to connect to the network 'Cay13' which is the one I'm sharing with my friend but it won't connect. It will just keep saying 'waiting for the network 'cay13' to connect to the network'. It won't come up with an error, it will just stop and refresh the wireless networks. I will then get a bubble that says 'Unable to connect to preferred wireless networks., Windows will keep trying.' etc... My friend's computer connects just fine so it doesn't seem like it's the router, and I've tried every which way from sunday to configure, connect, uninstall/reinstall the wireless drivers, etc.
View 4 Replies
View Related
Dec 3, 2011
Earlier today I re installed windows XP. Before reinstall my net was working fine. And now it won't connect.I tried to use the installation disc that came with the modem, and partway through the install/set up it says that it cannot find my Gateway.
ipconfig shows " windows up configuration"
And when search the dev managers, network addapters is not in the list.
View 10 Replies
View Related
Dec 25, 2012
Moved into a new place recently, internet has been working fine until earlier today I closed my laptop and went to make something to eat. When I came back and turned my computer back on, it keeps giving me this message when I try to connect. It doesnt ask for a password, it simply tries to connect for a few seconds before giving up. After waiting a few hours for the problem to fix itself, one of my flatmates got home and told me they are having the same issue. I have tried restarting my computer, turning off my firewall and restarting the modem.
View 2 Replies
View Related
Mar 19, 2012
For the past month or two I have been having some problems connecting to the internet on my computer of 6 years everything works fine its running windows 7 and I have no problems but now every time I turn my computer on the first application to connect to the internet is the only one that can connect. If I open a browser it connects but nothing else will and if I close it I have to restart in order to get a connection again.
View 3 Replies
View Related
Nov 11, 2011
I have 2 laptops both have windows 7 and use usb modem to connect to internet, and use Ad-hoc to share connection on 2nd laptop, usually i share connection from my personal laptop for my other laptop but since past few days i am getting error on my other laptop that window unable to connect to network, I tried making new ad-hoc connections with and without authentication but no luck.. but if i make ad-hoc connection on my other laptop and share it to my personal laptop it works and i am able to connect and browse internet without problem.
View 8 Replies
View Related
Jan 25, 2011
I've had windows 7 on my computer is my gaming computer i connect it wirelessly to the router downstairsthe power went out because the stge guy changed the meterNow my computer detects the network but will not connect. iv turned off all firewalls iv scanned for viruses but it keeps asking for network key if i put it in it just says windows cannot connect .
View 8 Replies
View Related
Aug 10, 2012
This morning, I tried using the computer and I wasn't able to connect to the Internet. The wireless icon on the bottom had either 1 bar, a caution sign with an exclamation point, or some sun icon. Either way, I could not get to my websites. I don't know why my computer cannot connect to the Internet because my iPad can connect perfectly well as I'm on it right now posting this thread. This is the first time it has happened. A few weeks ago my Internet started getting slower and slower. When it was usually an average of 3 bars, it went down to 2 and stayed that way. I was still able to get to my websites back then however the change in speed was noticeable. Now, it is neither 2 bars nor 3 but 0. y computer because my desktop is upstairs whereas my router is downstairs. With all the cables and such I would just end up messing it up or something. What could I do to fix this problem, it's been like this all day. Is it possible a virus is causing this problem?
View 8 Replies
View Related
May 12, 2012
I have a windows 7. This is first time happening this to me. I was on my computer last night and then all of the sudden the internet stopped working and then when I tried to connect back to my network it said windows was unable to connect to network, heres a short video i made from my ipod which internets does work on [URL]
View 3 Replies
View Related
Dec 26, 2012
We have a HP Pavilion with Vista that we cannot get connected wirelessly to centurylink's pk5001z. It will connect to the internet if it is hooked up to the ethernet cable. We can take this laptop to McDonald's and use their wi-fi, or at my parents...or seemingly anywhere else. We have successfully connected 3 other laptops to the wireless signal thru the pk5001z. We had the geeksquad advise us several times...going as far as they accessed this laptop remotely...and still can't obtain a solution. Do we need a different modem? The laptop sees that there is a network available but won't allow access to it. (it shows the network name in () and indicates local connection only)
View 9 Replies
View Related
Jan 7, 2012
I wiped vista and installed windows Xp now my modem wont recognize and i dont have internet. i have tried burning the Drivers from Cisco onto another CD From another Machine but it says it needs internet connection to do so. i can't connect or anything i have a DPC2203 cable modem?
View 1 Replies
View Related
Aug 10, 2011
I have windows 7 on one client and windows xp on seconad client. the problem occure when i share hp 1320 pcl 5 printer on network..when i go to install the error shows " unable to find *.inf file".
View 4 Replies
View Related
Jan 25, 2013
I just bought a Lenovo ThinkPad for my wife and I cannot connect to my router via wifi. I keep getting the message 'Windows was unable to connect to (network name). I tried it with router security disabled and I still get this message.
View 3 Replies
View Related
Apr 1, 2011
I have twho Windows 7 laptops that I want to connect to a Time Capsule, I have no problem at all with one of them, but the other laptop is giving me the error in my question
View 1 Replies
View Related
Dec 12, 2011
i bought an Apple iMac with Airport (an inbuilt router.) I have a desktop computer (Windows XP) in another room, and also a laptop.I bought a TP-LINK TL-WN721N Wireless USB Adapter. On the Laptop and Desktop, the wireless network is working. My network's name is listed, with full strength. However, when the message Detecting Network Type comes up, the message closes with another message - "Windows is unable to connect to the selected network. The network may no longer be in range.
View 11 Replies
View Related
Apr 23, 2012
Yesterday, my internet through wireless stopped working all of a sudden. It was working good till I closed my pc and went out for a few hours. When I returned and tried to access, it simply does not connect. I get an error saying "Windows was unable to connect to abcd (router name)". I tried to plug it into the router through ethernet and it works perfectly.I have tried to uninstall the wireless adapter and the lan adapter as well. I have tried it in safe mode. I have tried to delete the network also but now that left me with inputting the password everytime I want to connect.
View 14 Replies
View Related
Jan 12, 2011
I'm using Untangle on my clients wireless network. It handles all the DHCP and DNS requests. I'm using the web filter option as well. There are two access points, one on upper level and one on lower level. All connect into a switch and then into the optional port on the firewall. Firewall is not set up to give out DHCP leases. Pretty basic setup. Ever since I got Untangle up and running ive noticed my laptop, which has Win 7 as O/S will connect to wireless network, i can ping untangle box, and access point. But no internet. Signal bar shows I have limited connectivity. I thought it was just something on my laptop and set the issue aside. For the record I've never had any issue with connecting to a wireless network with this laptop, at home Im using Ubuntu server to handle all my DHCP, DNS requests on both my wired and wireless network. Never had a problem. Now this client is a library. And I talk to the director, and she has gotten complaints that any patron that uses Win 7 can not connect to wireless. When I'm not there we have a laptop that uses XP, it connects fine. All other patrons that use XP connect without a problem.
View 10 Replies
View Related
