Windows Xp Cannot Connect To Modem / IP Address With All Zeroes
Apr 30, 2011
I came home yesterday to find that I couldnt connect to the internet, I called my isp, and they said i'm receiving a full signal, but my computer just isn't communicating with my modem. The ip address is 0.0.0.0. Of course the isp can't do anything with this problem, and since my computer is past the warranty, neither can microsoft or hp (not for free anyways). The person at Qwest (isp) said I might have to "reset my netcard"
View 3 Replies
ADVERTISEMENT
Aug 13, 2012
I am a Rogers Customer (Canadian isp) whch uses DHCP IP address. My set up is like so: SMCD3GN2 Modem with gateway and wireless mode disabled. (i'm using it as a pure modem) 2 of its 4 ports are active, one is connected to my pc directly and the other is conencted to a d-link router. The router is connected to 4 other pc's + some wireless devices. What I want to do is change my IP address ( the pc with the direct connection ) in windows 7. I can effectively do this by simply shutting the modem off for about 30 seconds. Luckily my isp pretty much continuously assigns me a new IP address every time I do this.
The issue is I don't want to disrupt my entire network ( the router ) With windows XP I used to be able to go into cmd and ipconfig/release, then go to my ipv4 settings and set a custom spam ip address/subnet and then go back to automatic and then ipconfig/renew and voila I would have a new IP address. With windows 7 I have no luck. I have tried spoofing/changing my mac address of my network card/adapter and it results in my modem not assigning me an IP address. Is there any efficient way to change my DHCP IP address in windows 7 without disrupting my entire network?
View 7 Replies
View Related
Oct 17, 2011
have a problem with connecting to my cable internet modem with my windows xp machine. My windows vista computer automatically connects as soon as you connect it to the modem but the windows xp machine gives the "limited or no connectivity" error when I try to connect. What could be causing it to work with vista and not xp? what can I try to make it work?
View 3 Replies
View Related
Sep 29, 2011
Since 2 days I can't connect to the modem with my desktop pc(windows 7 x64). I get APIPA as IP adress(169.254.*.*). Tho I can go on internet with my notebook with the same cable I use for my desktop PC.I've also tried direct connection with the modem but it did not work aswell.
What I've done but without success:restore pc (1week)
winsock fix
reinstalling networkcard, then upgraded it
played with networkcard speed(full/half duplex), manipulating mac address
tried static IP
[URL]
View 10 Replies
View Related
Aug 22, 2012
I tried to connect inet with a DSL "Speed Modem 200" (no WLAN!, no router), RAS failure 651.
OS WIN7 Enterprise, SP 1, 64-Bit
It seems to be a driver problem of the LAN adapter, because under XP SP3 on the old PC ervery thing is fine.The driver test told me "newest version" what's to do?
View 2 Replies
View Related
Dec 26, 2012
We have a HP Pavilion with Vista that we cannot get connected wirelessly to centurylink's pk5001z. It will connect to the internet if it is hooked up to the ethernet cable. We can take this laptop to McDonald's and use their wi-fi, or at my parents...or seemingly anywhere else. We have successfully connected 3 other laptops to the wireless signal thru the pk5001z. We had the geeksquad advise us several times...going as far as they accessed this laptop remotely...and still can't obtain a solution. Do we need a different modem? The laptop sees that there is a network available but won't allow access to it. (it shows the network name in () and indicates local connection only)
View 9 Replies
View Related
Jan 7, 2012
I wiped vista and installed windows Xp now my modem wont recognize and i dont have internet. i have tried burning the Drivers from Cisco onto another CD From another Machine but it says it needs internet connection to do so. i can't connect or anything i have a DPC2203 cable modem?
View 1 Replies
View Related
Aug 23, 2011
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies
View Related
Jan 16, 2013
I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies
View Related
Feb 7, 2012
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies
View Related
Mar 15, 2013
I need a user and passs to access my ip...
View 2 Replies
View Related
Oct 28, 2011
I am having 5 IP addresses assigned to me. I have one commercial/business modem/gateway/router. If I want to have the advantage of separate lines (go with this for now) how else can the gateway do it other than simply passing the IP directly through, no router function, basically a modem/switch, everything else not there.
View 4 Replies
View Related
Jul 6, 2011
I am having problems logging into my wireless router. It was reset and the ssid has changed back to the default name with no security. my paradyne modem ip address in 192.168.1.1 and apparently with ipconfig the default gateway is also 192.168.1.1. The wireless router is not opening for me make changes i can only log into the modem.
View 2 Replies
View Related
Jan 25, 2013
My ISP assigns IP's through a standard motorola cable modem via DHCP server. I can pay extra for a persistent IP which uses the MAC of my switch and assigns an IP. Is there a way to get multiple public IP address's from the modem using a switch?For example. Can I plug the modem into the switch and then plug a computer server into the switch and get an IP assigned to that servers MAC address and then also have another server attached to another port on the switch and get a different public IP for that servers MAC address?
View 7 Replies
View Related
May 2, 2011
we were happily getting along with our RCN cable Motorola modem and DLink wireless 655 until the last couple of weeks. The internet would intermittently not be available, without warning. First couple of times we power cycled the modem and router, and it worked, but then stopped being available altogether. I got some support from RCN, the cable provider (they own the modem and it's old, so naturally that was my first thought). I now have a new modem and the situation is exactly the same. The error message that I get is that the IP address for the network cannot be found.
I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem. However, the internet still intermittently shuts down, and of course turning off the computer necessitates the whole procedure again. And now we have no wireless. Should we assume it's the router, and a new one would solve our problem? Of do we just need to reset the IP address of the router?
View 1 Replies
View Related
Feb 5, 2012
im recieving ip conflict adress error i have an dsl modem and its my individual i ave not share a connection with anyone.and whenever i recieved this error my net works zero
View 1 Replies
View Related
Apr 9, 2012
How to change ip address on frontier mod.7500 so i can run them together
View 1 Replies
View Related
Apr 14, 2011
My ISP gave me a Thomson THG520 modem when I subscribed to their service. It has 2 links and USB and an Ethernet link. It worked fine with our 2 computers but for several weeks or so I experiencing that it only gives me IP address only on one interface that one that's first plugged into the computer.
If I reset the modem and plug in the USB I get an IP address immediately. If I unplug the USB and plug in the Ethernet cable I don't get an IP address. If I reset again the modem and plug in the Ethernet cable I get an IP address but not on the USB link after I unplug the modem.
EDIT: after entering the modem's administration I realized it's firmware was updated (probably my ISP did it.). Also I read about how this stuff works, there is an evidence that my ISP set the CPE limit to 1. (so it seem only one computer connected to the modem can get IP address while the other can't.). And this configuration is stored on the modem somewhere. Is there a way to view it somehow?
View 1 Replies
View Related
Apr 4, 2012
My Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.
View 2 Replies
View Related
Sep 15, 2011
I bought the modem from clearwire but after a period of time cancel internet because price is going up, i get to retain the modem, I live at campus now and i can get free internet by registin my physical adress and model. How can I identify the physical adress to register it in a new network to continue using the modem and pick up the signal with my modem..
View 1 Replies
View Related
Dec 4, 2012
I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
View 2 Replies
View Related
Feb 6, 2012
I'm trying to connect my Xbox 360 to Live by bridging my computer's wireless connection. I've done this before for a friend in a different city and it worked fine, and I felt very proud of myself for doing so. However when I try to connect here, the modem won't assign my Xbox an IP address. I've been into ipconfig/all and tried to manually assign the same IP address to the Xbox but to no avail. Same deal with the alternate MAC address option.
To speed things along here's the readout from my ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSamsung>ipconfig/all
[Code].....
View 2 Replies
View Related
Jun 13, 2012
I have cable and am using an sb5101 modem and an wndr3700 v2 router. I have tried changing the router mac address with no luck. Also the ip address is dynamic not static verified by bigpond.how to change my ip address.
View 3 Replies
View Related
May 13, 2011
I'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.
Here is the ipconfig /all print:
Windows IP Configuration
Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.
View 5 Replies
View Related
Apr 9, 2013
Reset to factory defaults. DHCP turned on. Status page shows black for router IP, gateway, and DNS addresses. Powered router+cable modem on/off multiple times already. I also have another wifi router (WRT120N) and it works fine.
Pretty simple connection. Just a ethernet cable between the cable modem and E1200 internet port (Cable modem <---> E1200)
View 2 Replies
View Related
Jan 12, 2012
there could be complications, but it appears the WPM300N is 'bad'?my wife's computer (XP SP3) recently started freezing at random times. Once while surfing she got a BSOD. The last few days it had gotten much worse, sometimes the freeze occuring during the boot process, and again at random points.
What I tried was determing all new s/w installs and deleting them still didn't fix the problem. Next I used some Norton Ghost back-ups restoration from the time period she had the freezes... still was freezing. Next an image from long ago and it still froze. Got me thinking it was h/w related. She has a wireless mouse and keyboard. Put in wired units, still froze.
A few days ago my router died. It couldn't get a WAN IP Address from the ISP's cable modem. ISP verified the modem was working by having me attach directly to it one of my wired computers. This router was a new (2 months old) ASUS RT-N56U. I put back my old LinkSys WRT600N. In doing so I had to change the passphrase. This turned out to be a big assist to me determining what went wrong.
On each of the restores of an image, the system never froze, not until I connected to the router by giving the proper passphrase, but usually after that. When it happened (I did multiple image restores) when I was in Safe Mode with Network as it was connecting, the implication was clear it was the WMP300N.
As luck would have it, I had another card taken out of my old computer. Put that card in and so far, he computer has NOT frozen up. I've restored all the deleted items and Windows Updates and all other Updates (Norton ISS, Flash, Adobe) and it is running fine.
View 4 Replies
View Related
Sep 26, 2012
Attempting to get EA6500 working with TWC Motorola Surfboard SBV5220 modem, which has been working just fine for the last 2 years with a Linksys E3000 router. DHCP client in the EA6500 either doesn't ask for an IP address from the cable modem or the modem just isn't supplying one. With the E3000, you could see the IP address assigned by the cable modem and the primary and secondary DNS server addresses provided, and if the DHCP request didn't work, these addresses would be all zeroes. But, with the EA6500, I can't find an equivalent screen that shows these assignments, or zeroes when the DHCP request fails.
View 1 Replies
View Related
Apr 22, 2012
windows xp cannot detect modem
View 1 Replies
View Related
Aug 24, 2011
I am registered on a chat sight but for the past week and a half each time I go on I can login and then I get a "Error receiving data from server:Connection reset" what can I do to fix this problem? I have the newest java downloaded
View 1 Replies
View Related
Oct 4, 2011
When reinstalling windows corp. edition, windows installs, but the cable modem is not detected, and won't connect to internet.
View 3 Replies
View Related
Jan 19, 2013
my new laptop is not detecting my modem.its windows7 os
View 1 Replies
View Related
Jun 11, 2011
how do i get a cricket modem to work on windows 7?
View 1 Replies
View Related
Jan 14, 2012
As i said i have two laptops one has win xp and the other has win 7 ultimate
View 1 Replies
View Related
