Can't Get Modem Ip Address
Mar 15, 2013I need a user and passs to access my ip...
View 2 Replies
ADVERTISEMENT
Using Multiple Ip Address With Cable Modem?
Oct 28, 2011I am having 5 IP addresses assigned to me. I have one commercial/business modem/gateway/router. If I want to have the advantage of separate lines (go with this for now) how else can the gateway do it other than simply passing the IP directly through, no router function, basically a modem/switch, everything else not there.
View 4 Replies View RelatedWhat Is The Default Ip Address For Paradyne Modem
Jul 6, 2011I am having problems logging into my wireless router. It was reset and the ssid has changed back to the default name with no security. my paradyne modem ip address in 192.168.1.1 and apparently with ipconfig the default gateway is also 192.168.1.1. The wireless router is not opening for me make changes i can only log into the modem.
View 2 Replies View RelatedGet Multiple Public IP Address From The Modem Using Switch?
Jan 25, 2013My ISP assigns IP's through a standard motorola cable modem via DHCP server. I can pay extra for a persistent IP which uses the MAC of my switch and assigns an IP. Is there a way to get multiple public IP address's from the modem using a switch?For example. Can I plug the modem into the switch and then plug a computer server into the switch and get an IP assigned to that servers MAC address and then also have another server attached to another port on the switch and get a different public IP for that servers MAC address?
View 7 Replies View RelatedSMCD3GN2 Modem - How To Change IP Address (Windows 7)
Aug 13, 2012I am a Rogers Customer (Canadian isp) whch uses DHCP IP address. My set up is like so: SMCD3GN2 Modem with gateway and wireless mode disabled. (i'm using it as a pure modem) 2 of its 4 ports are active, one is connected to my pc directly and the other is conencted to a d-link router. The router is connected to 4 other pc's + some wireless devices. What I want to do is change my IP address ( the pc with the direct connection ) in windows 7. I can effectively do this by simply shutting the modem off for about 30 seconds. Luckily my isp pretty much continuously assigns me a new IP address every time I do this.
The issue is I don't want to disrupt my entire network ( the router ) With windows XP I used to be able to go into cmd and ipconfig/release, then go to my ipv4 settings and set a custom spam ip address/subnet and then go back to automatic and then ipconfig/renew and voila I would have a new IP address. With windows 7 I have no luck. I have tried spoofing/changing my mac address of my network card/adapter and it results in my modem not assigning me an IP address. Is there any efficient way to change my DHCP IP address in windows 7 without disrupting my entire network?
Windows Xp Cannot Connect To Modem / IP Address With All Zeroes
Apr 30, 2011I came home yesterday to find that I couldnt connect to the internet, I called my isp, and they said i'm receiving a full signal, but my computer just isn't communicating with my modem. The ip address is 0.0.0.0. Of course the isp can't do anything with this problem, and since my computer is past the warranty, neither can microsoft or hp (not for free anyways). The person at Qwest (isp) said I might have to "reset my netcard"
View 3 Replies View RelatedCable Modem To DLink Router Can't Find IP Address
May 2, 2011we were happily getting along with our RCN cable Motorola modem and DLink wireless 655 until the last couple of weeks. The internet would intermittently not be available, without warning. First couple of times we power cycled the modem and router, and it worked, but then stopped being available altogether. I got some support from RCN, the cable provider (they own the modem and it's old, so naturally that was my first thought). I now have a new modem and the situation is exactly the same. The error message that I get is that the IP address for the network cannot be found.
I got internet access by bypassing the router, connecting the modem directly to my (Windows XP) PC, releasing and renewing the IP address, and power cycling the modem. However, the internet still intermittently shuts down, and of course turning off the computer necessitates the whole procedure again. And now we have no wireless. Should we assume it's the router, and a new one would solve our problem? Of do we just need to reset the IP address of the router?
Broadband :: DSL Modem Connection Giving IP Address Conflict?
Feb 5, 2012im recieving ip conflict adress error i have an dsl modem and its my individual i ave not share a connection with anyone.and whenever i recieved this error my net works zero
View 1 Replies View RelatedHow To Change IP Address Of Westell 7500 Frontier Modem
Apr 9, 2012How to change ip address on frontier mod.7500 so i can run them together
View 1 Replies View RelatedThomson THG520 Modem Does Not Give IP Address On Both Links
Apr 14, 2011My ISP gave me a Thomson THG520 modem when I subscribed to their service. It has 2 links and USB and an Ethernet link. It worked fine with our 2 computers but for several weeks or so I experiencing that it only gives me IP address only on one interface that one that's first plugged into the computer.
If I reset the modem and plug in the USB I get an IP address immediately. If I unplug the USB and plug in the Ethernet cable I don't get an IP address. If I reset again the modem and plug in the Ethernet cable I get an IP address but not on the USB link after I unplug the modem.
EDIT: after entering the modem's administration I realized it's firmware was updated (probably my ISP did it.). Also I read about how this stuff works, there is an evidence that my ISP set the CPE limit to 1. (so it seem only one computer connected to the modem can get IP address while the other can't.). And this configuration is stored on the modem somewhere. Is there a way to view it somehow?
Speedtouch Modem Doesn't Provide Gateway Address To Router
Apr 4, 2012My Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.
View 2 Replies View RelatedIdentify Physical Address To Register In New Network To Continue Using Modem?
Sep 15, 2011I bought the modem from clearwire but after a period of time cancel internet because price is going up, i get to retain the modem, I live at campus now and i can get free internet by registin my physical adress and model. How can I identify the physical adress to register it in a new network to continue using the modem and pick up the signal with my modem..
View 1 Replies View RelatedThomson St-330 Modem - How To Change Global IP Address Without Restarting Router
Dec 4, 2012I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
View 2 Replies View RelatedXbox 360 Unable To Obtain IP Address From Bridged Wireless Modem Through Ethernet
Feb 6, 2012I'm trying to connect my Xbox 360 to Live by bridging my computer's wireless connection. I've done this before for a friend in a different city and it worked fine, and I felt very proud of myself for doing so. However when I try to connect here, the modem won't assign my Xbox an IP address. I've been into ipconfig/all and tried to manually assign the same IP address to the Xbox but to no avail. Same deal with the alternate MAC address option.
To speed things along here's the readout from my ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSamsung>ipconfig/all
[Code].....
Sb5101 Modem / Wndr3700 V2 Router - Change Bigpond IP Address (cable)?
Jun 13, 2012I have cable and am using an sb5101 modem and an wndr3700 v2 router. I have tried changing the router mac address with no luck. Also the ip address is dynamic not static verified by bigpond.how to change my ip address.
View 3 Replies View Related2wire 2701HG-B Wireless Router / Dsl Modem Combo / Can't Renew IP Address
May 13, 2011I'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.
Here is the ipconfig /all print:
Windows IP Configuration
Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.
Linksys Wireless Router :: E1200 Can't Acquire IP Address From Cable Modem
Apr 9, 2013Reset to factory defaults. DHCP turned on. Status page shows black for router IP, gateway, and DNS addresses. Powered router+cable modem on/off multiple times already. I also have another wifi router (WRT120N) and it works fine.
Pretty simple connection. Just a ethernet cable between the cable modem and E1200 internet port (Cable modem <---> E1200)
Linksys Wireless Adapters :: WMP300N Couldn't Get WAN IP Address From ISP's Cable Modem
Jan 12, 2012 there could be complications, but it appears the WPM300N is 'bad'?my wife's computer (XP SP3) recently started freezing at random times. Once while surfing she got a BSOD. The last few days it had gotten much worse, sometimes the freeze occuring during the boot process, and again at random points.
What I tried was determing all new s/w installs and deleting them still didn't fix the problem. Next I used some Norton Ghost back-ups restoration from the time period she had the freezes... still was freezing. Next an image from long ago and it still froze. Got me thinking it was h/w related. She has a wireless mouse and keyboard. Put in wired units, still froze.
A few days ago my router died. It couldn't get a WAN IP Address from the ISP's cable modem. ISP verified the modem was working by having me attach directly to it one of my wired computers. This router was a new (2 months old) ASUS RT-N56U. I put back my old LinkSys WRT600N. In doing so I had to change the passphrase. This turned out to be a big assist to me determining what went wrong.
On each of the restores of an image, the system never froze, not until I connected to the router by giving the proper passphrase, but usually after that. When it happened (I did multiple image restores) when I was in Safe Mode with Network as it was connecting, the implication was clear it was the WMP300N.
As luck would have it, I had another card taken out of my old computer. Put that card in and so far, he computer has NOT frozen up. I've restored all the deleted items and Windows Updates and all other Updates (Norton ISS, Flash, Adobe) and it is running fine.
Linksys Wireless Router :: EA6500 Doesn't Ask For IP Address From Cable Modem
Sep 26, 2012Attempting to get EA6500 working with TWC Motorola Surfboard SBV5220 modem, which has been working just fine for the last 2 years with a Linksys E3000 router. DHCP client in the EA6500 either doesn't ask for an IP address from the cable modem or the modem just isn't supplying one. With the E3000, you could see the IP address assigned by the cable modem and the primary and secondary DNS server addresses provided, and if the DHCP request didn't work, these addresses would be all zeroes. But, with the EA6500, I can't find an equivalent screen that shows these assignments, or zeroes when the DHCP request fails.
View 1 Replies View RelatedRouters / Switches :: Connect Modem To Wireless Router / Modem Combo?
Aug 23, 2011My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies View RelatedConnect Tata Photon Modem To Bsnl Wifi Modem Via Usb Port?
Jan 16, 2013I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies View RelatedSetting Up A Modem / Router Combo (D-Link DSL2730-B) As A Dedicated Modem?
Feb 28, 2013i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
Broadband :: Connect A Modem / Router To A Cable Modem?
Feb 7, 2012I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies View RelatedComputer Randomly Disconnects From Modem But Modem Is Still Running
Jul 5, 2012my computer randomly disconnects from my modem and will not reconnect until I restart my computer (do not need to restart modem). When I check the modem, it always is still running. The lights on the modem do the exact same thing whether the internet is working or not. The disconnection is entirely random. Sometimes it will disconnect immediately, sometimes it will take up to a few hours. I do not have a router hooked up to the modem, and the only other thing the modem is hooked up to is our tv. But even when the tv box is off, we still randomly disconnect.
On the previous forum thread that I read, some of the comments asked for the person to paste their entire ipconfig and their entire ping list from command prompt I will post that below: [code] Could it possibly be a virus? I am currently performing a virus scan using Microsoft Security Essentials. I will report the results of that tomorrow, seeing that it will take several (up to 10) hours to finish and it is nearly midnight of me posting this.I should also note that whenever I unplug my Ethernet cord it gives me a symbol that looks like this other than the regular disconnect with the red "X" over the wire symbol.
Why Router Work With DSL Modem But Not Cable Modem
Jan 6, 2013I'm switching to cable internet service instead of DSL. My Netgear router will not work with my cable modem; but it works like a charm with my DSL modem. Is it a problem with the router setup? Good thing I still have the DSL service.
View 3 Replies View RelatedLinksys Wireless Router :: E2000 WAN IP Address Cannot Be Same Subnet As Guest Network IP Address
Jul 16, 2011I switched from Time Capsule with AirPort to E2000 and have a problem with configuration.I use the same IPs as in AirPort and E2000 gives me an error:"The WAN IP address cannot be the same subnet as the Guest Network IP address" and I can't save configuration.But in my opinion they are different.I use "Static IP" option and I have IPs from my ISP: [code] So WAN IP is different subnet as LAN and I don't know what to do now. It worked with these settings in AirPort and here I can't proceed.
View 2 Replies View RelatedCisco VPN :: ASA5520 Starts To See Internal Rfc 1918 Address Instead Of Configured Address
Mar 6, 2012I am having an issue where occasionally the Sidewinder starts to see my internal RFC 1918 address instead of the configured external address of my firewall. This is for peering between the two. The error they see on the Sidewinder is:So instead of seeing the external peer address he sees a 10.220.3.18 address. We are not sure what triggers this becuase normally he see's my 63.117.98.222 address.
View 5 Replies View RelatedCisco Firewall :: ASA 5505 To Have Internal Address That Wish To Forward From External Address
Jul 8, 2012I have an old ASA 5505, and I'm having some trouble with Nat Hairpinning. I've done this with other firewalls before and I am having no luck now. I have an internal address that I wish to forward from an external address- so if someone goes to 123.456.789.012:3456 then it will forward to 192.168.1.244:92 (All numbers are arbitrary here- only for illustration). I have and Access Rule and NAT and PAT set up so that I can get in if I originate from outside the LAN. What I am trying to do is to have this work from inside the LAN as well- so that if I am at my desk, and I connect a device and type in 123.456.789.012:3456, it will deliver the content at 192.168.1.244:92. The problem I am having is that it just isn't working, and I cannot figure out why- When I started here, there was an address configured to work this way, and it still works- I just cannot find what is different between what I am doing and what the person who configured it did.
View 7 Replies View RelatedLinksys Wired Router :: RVL200 / RVS4000 Possible To Assign Public IP Address As Local IP Address?
Feb 28, 2011Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies View RelatedLinksys Wired Router :: WRT54GS V5.1 MAC Address Appears With IP Address
Jul 3, 2011I have a Linksys WRT54GS v5.1 router running firmware 1.52.5.I am trying to use Linksys IP Phones SPA942, but these do not seem to be able to log on and just show "Initializing network" even though the MAC address appears in the router with an IP address.The strange thing is that I already have 4 SPA941 phones that work with no problem and just log on to the network.Is there something about the SPA942 that I need to configure differently, I have factory reset it with sucess, but still unable to log on to the network.
View 1 Replies View RelatedCisco :: Module In CW To Get MAC Address And IP Address Of All Switch Ports On 6500
Oct 13, 2009Is it possible using any module in CW to get the MAC address and IP address of all switchports on a 6500?
View 6 Replies View RelatedLinksys Cable / DSL :: WAG120N Mac Address Cannot Be Multicast Address?
Jun 3, 2012I have been trying to clone my PC's MAC onto my Linksys WAG120N adsl2+ modem router .
I click the the clone my PC's MAC button in the MAC address clone tab. I get the following error :
"Mac address cannot be the multicast address"
The MAC address starts with 1C:C1:XX:XX:XX:XX
I even tried to update the firmware.
D-Link DIR-615 :: Laptops Keeps Losing IP Address / Gets A Self-assigned IP Address
Aug 23, 2009I recently switched routers to the DIR-615 and I'm trying to troubleshoot why one of our laptops keeps losing the IP address and gets a self-assigned IP address. I see the following messages in the log, I am wondering if the reason codes are listed and explained somewhere? I tried searching the manual but could not find any information.
View 9 Replies View Related
