I am having problems logging into my wireless router. It was reset and the ssid has changed back to the default name with no security. my paradyne modem ip address in 192.168.1.1 and apparently with ipconfig the default gateway is also 192.168.1.1. The wireless router is not opening for me make changes i can only log into the modem.
View 2 RepliesFor some reason, whenever I go home (I'm in college right now), my internet goes haywire. It'll connect for about an hour or so when I first load it up, but after that, it refuses to connect at all. If I restart my modem (verizon fios modem), then it'll connect for about 5 minutesIf I run the troubleshooter, sometimes it doesn't detect anything wrong with it, and other times, it says "the default gateway is not available"[CODE]
View 1 Replies View RelatedLastnight I power cycled my cable modem, and router in an attempt to get a Slingbox to work. What ended up happening is that after the modem and router came back online all the computers on my wired home network changed their default gateway to the IP of the modem and not the router. Two of the computers are fixed now, but one of the laptops is still not able to get to the internet using DHCP. I can use a static IP with the correct default gateway for the router, and succesfully get to the internet, but then I can't see my server on my netowrk. And the same is true in reverse, in order to see my server I have to go back to DHCP, but I can't get on the internet
View 1 Replies View RelatedI need to reset my DLink wireless modem all over again, can't get it to recognise the router, so thought that it would need to reset to factory defaut, how can I do this. Tried just hitting reset on the router,but nothing is happening.
View 4 Replies View RelatedI WOULD LIKE TO KNOW THE DEFAULT IP ADDRESS OF MY SIEMENS GIGASET SE568 MODEM THROUGH THE COMP
View 1 Replies View RelatedMy ISP is changing out all the ADSL routers in our area and they have blocked the Default Gateway Address, so we can not access it via Web Browser. This is frustrating because they changed our Wi-Fi password, instead of just keeping what we had like an Einstein. They said they did it because of Hackers
View 2 Replies View RelatedI'm trying to configure a 3com 5500 switch with default ports for each vlan.The default ports are connected to IPS/IDS and do not have an IP address. I have a trunked esx host coming in and want to send traffic to specific ports based on vlan id - one port per vlan (10 total). Right now all I'm getting on the ips/ids is stp and arp traffic.
View 2 Replies View Relatedi am using a tp link 8817 modem, i can go online normaly but i can not access the default gateway (192.168.1.1, i check it in cmd/ipconfig) it keeps asking me username and password, althought i filled them with the correct username and password.
View 2 Replies View RelatedThe ADSL Modem CISCO867-K9 is not connecting to our NAS router with default mtu value in the NAS router virtual template
Is there is any reason for ths ? With the below settings my ADSL 867 connecting , but if i remove the (mtu 1440 and ip tcp adjust-mss 1392 , this modem is not connecting
My Virtual Template config
interface Virtual-Template1
mtu 1440
ip unnumbered Loopback3
[Code].....
Dear The ADSL Modem CISCO867-K9 is not connecting to our NAS router with default mtu value in the NAS router virtual template.With the below settings my ADSL 867 connecting , but if i remove the (mtu 1440 and ip tcp adjust-mss 1392 , this modem is not connecting. [code]
View 2 Replies View RelatedClient is having 1 file server running small business windows server 2003. Server is not configured with domain, it is working only on workgroup. We have around 15 users who are using that server as file server only. Now my main question is do i need to configure DNS server in that server?we also have internet connection running (have problem in that also, will explain next time) with wireless router to connected with switch. So do I need to setup dns in server also or just put static ip (I prefer static then dhcp) & dns server from ip will be ok? If I put dns which I got from ISP, so will it create any problem with using those file from server?the second question is..
What IP address, Default gateway and dns address I should use for Server & also client pc.
router ip - 192.168.1.1
server ip - 192.168.1.10
Currently no DNS setupcurrent configuration - Server
IP - 192.168.1.10
subnet- 255.255.255.0
gateway - 192.168.1.1
dns - 213.42.20.20 (from ISP)
dns2 - xxx.xx.xx.xx (from ISP)current configuration - Client
IP - 192168.1.111(to 115)
subnet - 255.255.255.0
gateway - 192.168.1.1
dns 1 - 192.168.1.10 (File Server)
dns 2 - 213.42.20.20 (from ISP)
What is the default IP address for a Netopia 3347 router?
View 3 Replies View RelatedI would like to change the default ip address on my netopia 3347 frrom 192.168.1.whatever to 192.168.0.whatever
View 2 Replies View RelatedWhen I connect my DSL modem to my DLINK wireless router, two identical DEFAULT connections appear in my wireless connection detection. Both will only connect locally.
View 5 Replies View RelatedRegion : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : V2
ISP : Reliance netconnect Vendor (ZTE Model AC2736) CDM
Region : India
Just now I bought this router. When I am trying to configure it with default firmware is not identifying the modem itself. So Afyter facing this problem, I updated my Router firmware(TL-MR3220_v_2_120822) and retry the process. But this time, It identified the modem for few seconds, then its changes its trying to connecting, after that its change it state to unplugged.
hrome threw me a DNS lookup failed. I go into my network settings and I noticed that I had limited connectivity. It would switch between no network access and no internet access every few seconds. After a bit of fiddling around, I got it to connect through assigning myself a static IP. This isn't exactly convenient because I use this computer on multiple networks. When I try to have it on automatic IP, I get no IP address or default gateway when I do an ipconfig /all. It would appear that my router quit assigning my laptop an IP for no reason whatsoever. DHCP is enabled on the router, and all other devices work fine. What could possibly be the problem here? I'm 99% sure it's not an IP conflict either. It's not being MAC filtered because I'm on the thing right now posting this through a static IP. It's not my A/V because it's worked great in the past. Perhaps I should also mention it occasionally says "unidentified network" instead of the SSID
View 8 Replies View Relatedwhat my IP address, my subnet mask, and what my default gateway is. I have tried typing "ipconfig" into CMD but then I only got up 100 boxes saying "Permissionisconnected"
View 12 Replies View RelatedWhat is the default IP address of Buffalo Wi-Fi Router WHR-HP-G300N-AP? I just bought new one but I forgot that my PC CD-ROM is not anymore working. I'd like to set this up thru the default IP address.
View 1 Replies View RelatedI can't print in my network printer using my Laptop (WIFI). I have check the default gateway of the desktop PC on which connected the printer and its different from my Laptop. Also I cant "SEE" this desktop PC on the LAN.
View 1 Replies View RelatedI am about to configure a brand new AIR-WLC2106-K9 V05 and didn't manage to find what is the deafult IP address configured on the device. I need it so I could start Web GUI management session.
View 4 Replies View RelatedSo network was running fine for about a year or so. Network consists of 1 Motorola SB6120 cable modem attached to a D-Link DIR-601 wireless router. All settings were default except for SSID and WPA password. One day I just couldn't access internet anymore. I've narrowed it down to the default gateway that is being given out through DHCP. The default gateway that is being given out is the IP of the modem (192.168.100.1) and not of the Router (192.168.0.1). I can't find any option on Wireless router to be able to force the gateway address when handing out the gateway IP. Theoretically I thought I should be able to put router on same subnet as modem as 192.168.100.2 but that still doesn't work. If I set the IP adresses statically on the PCs and give it the Gateway of the Router everything works fine. I should mention this is for my boss' house and basically I dont want him calling me everytime he has a friend come over and I have to talk em through setting up a Static IP.
And just for an example this is what I get if I use DHCP:
IP Address: 192.168.0.155
Mask: 255.255.255.0
DNS: 192.168.0.1
Default Gateway: 192.168.100.1
And If I want it to work I have to change the default gateway to 192.168.0.1 I've tried updating routers firmware and reset to factory default numerous times. Is it possible for a router DHCP stop working?
recently, i have connected the internet to my PC with cable. Here the problem is , the packets are not receiving in the status bar of internet connection. I have checked in command prompt, the ip address is connecting properly but the default gateway ip address is showing "Request Timed Out" message.
View 1 Replies View Relatedsince my network (static ip, cameras, and other boxes) is set up using 10.0.0.xx. How do I change the default ip address on the Linksys e3500 wifi router to 10.0.0.xx?
View 2 Replies View RelatedI have bought EA4500 router recently in preparations for the Singapore fibre broadband upgrade.
But for the time being I'm using it to connect to my current Linksys WAG200G ADSL Wireless Gateway.
Here's the issue I'm currently facing. I have set my EA4500 router default IP address to 192.168.1.10 to aviod conflicts with my gateway which is using 192.168.1.1. But everytime when I connect my router to the gateway, the router's default IP address changes to 10.179.159.126 or some other random IP address by itself whenever I try to change to back. However, I'm still able to surf the internet and stuffs with that current settings.
Is there something that I could do to prevent the IP address from changing by itself? And will the same thing happen again when I upgrade to fibre broadband?
My Motorola 850G router is several years old and working fine. However, my wi-fi connection is presently "unsecured" and I need some assistance as to how to go about setting up a secure network. My browser is not recognizing the router's default IP address.
View 1 Replies View RelatedI would like to know what ip addresses I should see in this table. Shouldn't my default gateway IP have the same mac address as my computer or router? There are 2 different ip address/mac addresses from different a ISP than mine. I have a cisco DPC3825..I suspect a someone is spoofing my DNS.
View 4 Replies View RelatedI have a 3500 XL switch with the following default gate IP address that i need to clear from the switch but not quite shore how to remove it.
I've removed the customer original Ip for security reason as this is an open discussion forum and just replaced with 1.1.1.1
switch#show ru
Building configuration...
Current configuration:
!
[Code].....
I have the following zebra.conf on my router box "A":
hostname nuclear-router
password password
enable password password
interface eth0
ip address 192.168.2.1/24
multicast
[code]...
eth0 is connected to a switch and contains the 192.168.2.0/24 range, and A is connected to my WRT54GL "B" (with IP 192.168.1.1, containing 192.168.1.0/24 range, DHCP serves IPs above .100) wirelessly. B is connected directly to my DSL modem.
The problem is that when I specify the default route using the interface name, I can't connect to the internet from A or any hosts behind it - I'm always hit with a "no route to host" error. Name lookup and pinging any local host (even in a different range) or the DSL modem works fine - it's only when going beyond the modem that things stop working. However, when I use the IP of B as the gateway, it works fine. I noticed that route output on A when the default route was specified using the interface alone had only an asterisk in the gateway column. I was under the impression that these approaches should be identical in practice, so though I got it working, I'd like to know what I'm misunderstanding (and/or misconfiguring). Why didn't the default route work when specified using just the interface?
All routers and the modem too have RIP (version 2) enabled, and of course the password isn't really the word "password".
I have a Cisco SG200-08p that's acting up. After setting up 2 larger 200 series switches I pulled this out for its config. I changed the default password and assigned the new static IP address of 192.168.0.103, that's it. The settings applied and worked normally but after rebooting the switch it reverted itself back to the default ip of 192.168.1.254, it retained the new password. After this happened a few times I upgraded the firmware to the latest version, reset the device to factory settings and applied the new address again to have the same problem. It doesn't matter if I reboot the switch in the management interface or physically. Is there a problem with having a zero in the third octet (that would be lame)?
View 6 Replies View RelatedWe have 3 WAP4410N on our network. Our laptops pick them up but I cannot access the configuration Utility or ping the default IP address. If their IP addresses have been changed how do I find out what their current IP adds are? We currently use static IP addressing for our network.
View 2 Replies View RelatedI need a user and passs to access my ip...
View 2 Replies View RelatedI am having 5 IP addresses assigned to me. I have one commercial/business modem/gateway/router. If I want to have the advantage of separate lines (go with this for now) how else can the gateway do it other than simply passing the IP directly through, no router function, basically a modem/switch, everything else not there.
View 4 Replies View RelatedMy ISP assigns IP's through a standard motorola cable modem via DHCP server. I can pay extra for a persistent IP which uses the MAC of my switch and assigns an IP. Is there a way to get multiple public IP address's from the modem using a switch?For example. Can I plug the modem into the switch and then plug a computer server into the switch and get an IP assigned to that servers MAC address and then also have another server attached to another port on the switch and get a different public IP for that servers MAC address?
View 7 Replies View Related