Default IP Address For A Netopia 3347 Router?
Aug 8, 2012What is the default IP address for a Netopia 3347 router?
View 3 Replies
ADVERTISEMENT
Change Default Ip Address On Netopia 3347?
Sep 2, 2012I would like to change the default ip address on my netopia 3347 frrom 192.168.1.whatever to 192.168.0.whatever
View 2 Replies View RelatedPort Forwarding On Netopia 3347-02?
Jul 11, 2011I installed 6 Q-see Cameras, pretty easy to install. The problem is running the port forwarding so I can view the cameras in the internet. I am running a Netopia 3347-02 router. I am not sure how to port forwarding so I can view the cameras over the internet. On the seeting for the DVR. I can see the Ip address ex. 198.168.X.X and the port is 80. On the Netopia 3347-02 router I went to pinholes cause is wher it will let me do the port forwarding, and I name the port Ex. test,
pinhole name ; TEST
start port: 80
end port: 80
[Code].....
External Access To DVR - Netopia 3347?
Jan 24, 2011I recently setup a Camera (DVR) system for a good friend of mine who just opened a restaurant. We are able to access the cameras just fine internally (LAN), but not externally (WAN).
I port forwarded, or 'pinholed' as this router uses, ports 9000 and 80 (changed the routers web port to 81 so there would be no conflict). I grabbed the external ip for the network and immediately tried connecting from home (I was doing everything remotely), and could not access the cameras, neither with the dvr software, nor with internet explorer.
EDIT: I believe he has a dsl line. I wonder if we'd need to change the configuration in the modem itself?
Netopia 3347 With 5 Useable Statics / Way To Go Wireless With This Set Up?
Dec 13, 2012I have a netopia 3347 with 5 useable statics from att. What is the best way to go wireless with this set up. I do not want DHCP turned on. And i would like to not assign an ip to the laptop.
View 1 Replies View RelatedMotorola Netopia 3347 - Can View Cameras Locally But Not Remotely
Apr 23, 2012I need viewing a DVR camera system remotely through a Motorola Netopia 3347 router. I was able to view the system properly for a year with the old ATT modem and a separate router, but recently the modem crashed and ATT replaced it with this Netopia that I can't for the life of me, understand.I can view locally but not remotely from the internet. I need establishing the Pinholes properly. I'm trying to get it working for port 85 for the DVR system. But I'm confused on the Internal vs. External port #'s it asks for in the Pinhole screen. No combination I enter seems to work. I even tried just using port 80 to get it working, but there was a conflict creating a pinhole for 80 since its already mapped to HTTP.
View 5 Replies View RelatedWifi Router Not Assigning Ip Address Or Default Gateway?
Oct 25, 2012hrome threw me a DNS lookup failed. I go into my network settings and I noticed that I had limited connectivity. It would switch between no network access and no internet access every few seconds. After a bit of fiddling around, I got it to connect through assigning myself a static IP. This isn't exactly convenient because I use this computer on multiple networks. When I try to have it on automatic IP, I get no IP address or default gateway when I do an ipconfig /all. It would appear that my router quit assigning my laptop an IP for no reason whatsoever. DHCP is enabled on the router, and all other devices work fine. What could possibly be the problem here? I'm 99% sure it's not an IP conflict either. It's not being MAC filtered because I'm on the thing right now posting this through a static IP. It's not my A/V because it's worked great in the past. Perhaps I should also mention it occasionally says "unidentified network" instead of the SSID
View 8 Replies View RelatedDefault Ip Address Of Buffalo Wifi Router Whr-hp-g300n-ap?
May 12, 2012What is the default IP address of Buffalo Wi-Fi Router WHR-HP-G300N-AP? I just bought new one but I forgot that my PC CD-ROM is not anymore working. I'd like to set this up thru the default IP address.
View 1 Replies View RelatedNetgear WNR2000 Router Behind Netopia 2241N Configuration
May 25, 2012Our ISP provided a DSL modem/router (Netopia) that I connected to the Netgear wireless router with dd-wrt flashed. All I've done so far is connected the two. I have a connection, but I want to know if it's possible or advisable to configure everything from the Netgear router. But following the instructions here[URL], it seems I have to configure DNS and such using the Netopia router. I don't have a full grasp on how to use them together the correct way - like using the Netopia as an ethernet bridge.
View 4 Replies View RelatedSet A Static IP On Linksys Router With Netopia Modem In Bridge
Aug 3, 2011I currently have service with AT&T DSL. I have their Motorola Netopia 3347 modem that is set to Bridged mode and going to a Linksys WRT54GL router, which then goes out to a Cisco 24 port switch.AT&T has given us a Static IP to use, which was set up and working just fine when the modem was NOT in Bridged mode. Now that I have it set to bridge mode (as per a request by our VoIP provider), our IP address is no longer static at WhatismyIP.com...instead it changes frequently. However, I have a back up server here that needs to have a static IP so offsite back ups can find our modem/router and then the back up server.I am running Tomato software on the Linksys admin. When I go to the Basic->Network section, the WAN/Internet is set to PPPoE with the AT&T username and password that was originally used in the Netopia modem entered in. If I set this option to Static, it removes the username/password fields, so I do not think that my internet would work that way. Or, would the Netopia use the username/password to authenticate, and then just pass it through to the Linksys in bridge mode and THEN it would use the static IP? what I need to do to make the Linksys grab our Static IP instead of changing? Neither AT&T or the VoIP company can figure it out...
View 2 Replies View RelatedLinksys Wireless Router :: Change Default IP Address On E3500 To 10.0.0.xx?
Jan 21, 2013since my network (static ip, cameras, and other boxes) is set up using 10.0.0.xx. How do I change the default ip address on the Linksys e3500 wifi router to 10.0.0.xx?
View 2 Replies View RelatedLinksys Wireless Router :: Setting Default IP Address For EA4500?
Aug 27, 2012I have bought EA4500 router recently in preparations for the Singapore fibre broadband upgrade.
But for the time being I'm using it to connect to my current Linksys WAG200G ADSL Wireless Gateway.
Here's the issue I'm currently facing. I have set my EA4500 router default IP address to 192.168.1.10 to aviod conflicts with my gateway which is using 192.168.1.1. But everytime when I connect my router to the gateway, the router's default IP address changes to 10.179.159.126 or some other random IP address by itself whenever I try to change to back. However, I'm still able to surf the internet and stuffs with that current settings.
Is there something that I could do to prevent the IP address from changing by itself? And will the same thing happen again when I upgrade to fibre broadband?
Motorola Wireless WR850G Router - Browser Is Not Recognizing Default IP Address
Feb 27, 2013My Motorola 850G router is several years old and working fine. However, my wi-fi connection is presently "unsecured" and I need some assistance as to how to go about setting up a secure network. My browser is not recognizing the router's default IP address.
View 1 Replies View RelatedCisco WAN :: DPC3825 Shouldn't Default Gateway IP Have Same Mac Address As Computer / Router
Feb 23, 2013I would like to know what ip addresses I should see in this table. Shouldn't my default gateway IP have the same mac address as my computer or router? There are 2 different ip address/mac addresses from different a ISP than mine. I have a cisco DPC3825..I suspect a someone is spoofing my DNS.
View 4 Replies View RelatedMotorola 3347 Modem - Internet Light Will Just Go Red For About 45 Seconds?
Jul 23, 2012I have Qwest DSL 7MB internet with a motorola 3347 Qwest model modem and for some reason throughout the day sometimes fewer than than others my internet light will just go red for about 45 seconds up to 2 to 3 minutes them it starts flashing green again? I called them multiple times but they just say maybe its the modem. Is there any test I can do to see? I upgraded the firmware to the newest one to see if that would work but no luck.
View 1 Replies View RelatedWay To Know Default Ip Address Of A Gigaset Se568
Jan 27, 2012I WOULD LIKE TO KNOW THE DEFAULT IP ADDRESS OF MY SIEMENS GIGASET SE568 MODEM THROUGH THE COMP
View 1 Replies View RelatedISP Blocks Default Gateway Address
Feb 23, 2012My ISP is changing out all the ADSL routers in our area and they have blocked the Default Gateway Address, so we can not access it via Web Browser. This is frustrating because they changed our Wi-Fi password, instead of just keeping what we had like an Einstein. They said they did it because of Hackers
View 2 Replies View RelatedDefault Ports Are Connected To IPS / IDS And Do Not Have An IP Address
May 2, 2011I'm trying to configure a 3com 5500 switch with default ports for each vlan.The default ports are connected to IPS/IDS and do not have an IP address. I have a trunked esx host coming in and want to send traffic to specific ports based on vlan id - one port per vlan (10 total). Right now all I'm getting on the ips/ids is stp and arp traffic.
View 2 Replies View RelatedWhat Is The Default Ip Address For Paradyne Modem
Jul 6, 2011I am having problems logging into my wireless router. It was reset and the ssid has changed back to the default name with no security. my paradyne modem ip address in 192.168.1.1 and apparently with ipconfig the default gateway is also 192.168.1.1. The wireless router is not opening for me make changes i can only log into the modem.
View 2 Replies View RelatedUsing Netopia 3347NWG In Bridge Mode?
Apr 22, 2012I have a Westell 6100 modem. After my old router, a DIR-655, got zapped by some electric charge from a nearby thunderstorm, I bought a Netgear WNDR3800 router. But I have not been able to get the Netgear router to connect to the Westell 6100 modem reliably [URL]
A friend had given me a Netopia 3347NWG router/modem some time ago but I had never attempted to use it. I was able to get into the web setup screens of the 3347NWG and, without attempting to connect the Netgear router to it, I was able to connect to the Internet via the setup screen. But every attempt to actually go to a web address would fail with a timeout, and efforts to ping always failed with a timeout. Yet the 3347NWG setup said I was connected.
Does anybody know how to setup the 3347NWG so it actually can connect to the Internet correctly so that I am able to surf to a web page or ping an address successfully ?
Does anybody know how to setup the 3347NWG in Bridge mode so that I can use it strictly as a ADSL modem and try to use it with my Netgear WNDR3800 router ?
If I can not use the 3347NWG with my Netgear router I had planned to send the Netgear router back for a replacement since it is not connecting relaibly to my Westell 6100 modem. But if I can get the 3347NWG to work as a modem and reliably connect my Netgear router to it, I will not have to send back the Netgear router for another one.
Servers :: Default Gateway / IP And DNS Address For Client PC?
May 29, 2012Client is having 1 file server running small business windows server 2003. Server is not configured with domain, it is working only on workgroup. We have around 15 users who are using that server as file server only. Now my main question is do i need to configure DNS server in that server?we also have internet connection running (have problem in that also, will explain next time) with wireless router to connected with switch. So do I need to setup dns in server also or just put static ip (I prefer static then dhcp) & dns server from ip will be ok? If I put dns which I got from ISP, so will it create any problem with using those file from server?the second question is..
What IP address, Default gateway and dns address I should use for Server & also client pc.
router ip - 192.168.1.1
server ip - 192.168.1.10
Currently no DNS setupcurrent configuration - Server
IP - 192.168.1.10
subnet- 255.255.255.0
gateway - 192.168.1.1
dns - 213.42.20.20 (from ISP)
dns2 - xxx.xx.xx.xx (from ISP)current configuration - Client
IP - 192168.1.111(to 115)
subnet - 255.255.255.0
gateway - 192.168.1.1
dns 1 - 192.168.1.10 (File Server)
dns 2 - 213.42.20.20 (from ISP)
How To Find IP Address / Subnet Mask And Default Gateway
Apr 18, 2013what my IP address, my subnet mask, and what my default gateway is. I have tried typing "ipconfig" into CMD but then I only got up 100 boxes saying "Permissionisconnected"
View 12 Replies View RelatedPrint In Network Printer With Different Default Gateway Address?
Feb 7, 2012I can't print in my network printer using my Laptop (WIFI). I have check the default gateway of the desktop PC on which connected the printer and its different from my Laptop. Also I cant "SEE" this desktop PC on the LAN.
View 1 Replies View RelatedCisco Wireless :: Default IP Address Of A Brand New AIR-WLC2106-K9 V05?
Dec 11, 2012I am about to configure a brand new AIR-WLC2106-K9 V05 and didn't manage to find what is the deafult IP address configured on the device. I need it so I could start Web GUI management session.
View 4 Replies View RelatedUse Netopia 2247 As Repeater For Cisco EPC2425?
Feb 24, 2012One of my housemates has had to borrow my wifi adapter to connectto cable BB in my house which uses a cisco epc2425 cable router/modem.Recently found a Netopia 2247. Is it possible to setup the 2247 asa wifi repeater so my housemate can simply connect to the 2247 via
View 1 Replies View RelatedRouters / Switches :: Default Gateway Ip Address Request Timed Out?
Jul 18, 2011recently, i have connected the internet to my PC with cable. Here the problem is , the packets are not receiving in the status bar of internet connection. I have checked in command prompt, the ip address is connecting properly but the default gateway ip address is showing "Request Timed Out" message.
View 1 Replies View RelatedCisco Switching/Routing :: 3500 XL - Remove Default Gateway IP Address
Aug 9, 2012I have a 3500 XL switch with the following default gate IP address that i need to clear from the switch but not quite shore how to remove it.
I've removed the customer original Ip for security reason as this is an open discussion forum and just replaced with 1.1.1.1
switch#show ru
Building configuration...
Current configuration:
!
[Code].....
WRT54GL - Default Route In Quagga Doesn't Work If Specified Using Interface Rather Than Address
Apr 4, 2013I have the following zebra.conf on my router box "A":
hostname nuclear-router
password password
enable password password
interface eth0
ip address 192.168.2.1/24
multicast
[code]...
eth0 is connected to a switch and contains the 192.168.2.0/24 range, and A is connected to my WRT54GL "B" (with IP 192.168.1.1, containing 192.168.1.0/24 range, DHCP serves IPs above .100) wirelessly. B is connected directly to my DSL modem.
The problem is that when I specify the default route using the interface name, I can't connect to the internet from A or any hosts behind it - I'm always hit with a "no route to host" error. Name lookup and pinging any local host (even in a different range) or the DSL modem works fine - it's only when going beyond the modem that things stop working. However, when I use the IP of B as the gateway, it works fine. I noticed that route output on A when the default route was specified using the interface alone had only an asterisk in the gateway column. I was under the impression that these approaches should be identical in practice, so though I got it working, I'd like to know what I'm misunderstanding (and/or misconfiguring). Why didn't the default route work when specified using just the interface?
All routers and the modem too have RIP (version 2) enabled, and of course the password isn't really the word "password".
Cisco Switching/Routing :: SG200-08p - IP Address Reverts To Default After Reboot?
Dec 1, 2012I have a Cisco SG200-08p that's acting up. After setting up 2 larger 200 series switches I pulled this out for its config. I changed the default password and assigned the new static IP address of 192.168.0.103, that's it. The settings applied and worked normally but after rebooting the switch it reverted itself back to the default ip of 192.168.1.254, it retained the new password. After this happened a few times I upgraded the firmware to the latest version, reset the device to factory settings and applied the new address again to have the same problem. It doesn't matter if I reboot the switch in the management interface or physically. Is there a problem with having a zero in the third octet (that would be lame)?
View 6 Replies View RelatedCisco Wireless :: WAP4410N / Cannot Access Configuration Utility Or Ping Default IP Address
Sep 29, 2010We have 3 WAP4410N on our network. Our laptops pick them up but I cannot access the configuration Utility or ping the default IP address. If their IP addresses have been changed how do I find out what their current IP adds are? We currently use static IP addressing for our network.
View 2 Replies View RelatedCisco Routers :: Netopia 3347W - RV110W / 110w Will Not Complete PPPOE Connection
Sep 27, 2011I have a netopia 3347W adsl modem/router that I have put in "ethernet bridge" mode. At that point the RV110W has to authenticate to ATT using PPPOE. I have verified the username/paswd for the PPPOE connection. The 110w will not complete the PPPOE connection. Looking at the logs it shows that it handshakes and authenticates with the PPPOE server. Then unexpectedly the log shows a termination with exit status 15. It then tries to renegotiate the PPPOE connection.
View 2 Replies View RelatedLinksys Wireless Router :: E2000 WAN IP Address Cannot Be Same Subnet As Guest Network IP Address
Jul 16, 2011I switched from Time Capsule with AirPort to E2000 and have a problem with configuration.I use the same IPs as in AirPort and E2000 gives me an error:"The WAN IP address cannot be the same subnet as the Guest Network IP address" and I can't save configuration.But in my opinion they are different.I use "Static IP" option and I have IPs from my ISP: [code] So WAN IP is different subnet as LAN and I don't know what to do now. It worked with these settings in AirPort and here I can't proceed.
View 2 Replies View RelatedLinksys Wired Router :: RVL200 / RVS4000 Possible To Assign Public IP Address As Local IP Address?
Feb 28, 2011Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies View Related