Using Netgear DG834G As Wireless Bridge?
Aug 23, 2012
I've got an old netgear dg834g router and I want to set it up so that it connects wirelessly to the main router in the house (netgear dgn3300) in order to have wired connections from the old router to my pc and xbox 360 upstairs.
I think I need to change the setting on the old router so that it acts as a 'repeater with wireless client association' but on the most recent firmware this doesn't seem to be an option.
I've been trying to use this guide [URL] but it doesn't seem to work. Whenever I change the IP address of the old router it just breaks down and won't let me access the settings anymore.
View 2 Replies
ADVERTISEMENT
May 6, 2012
I have a Netgear router (DG834G), but my Dell laptop can 't see it. All my drivers are up to date.
View 10 Replies
View Related
Feb 28, 2011
My dad is using a netgear router DG834G V2 and has no problem until recently. He got a new phone and wanted to connect wirelessly but couldn't remember is network key. After playing around with things he's obviuosley changed something and now has no internet what so ever.
I've tried plugging in the eternet cable and accessing 192.168.0.1 but can't see any problems there. When i am able to get a connection it's local only and Internet explorer can't display web pages. And when i unplug the ethernet cable it doesn't always find the wireless connection, and if it does find it, then i have the same problem as when the lead is plugged in.
His ISP is AOL although he doesn't always access the internet via aol, he'll use IE and i'm trying to get him to give firefox a go.
I have tried disabled both windows firewall and AVG firewall and individually but still keep getting the message internet explorer cannot display webpage.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Dave-PC
Primary Dns Suffix . . . . . . . :
[Code]....
View 1 Replies
View Related
Jul 4, 2012
I just bought an E2500 router. I have until now been using a Netgear DG834G v5.
I have tried multiple times but my success has been limited. I turned off DHCP in the Netgear, set the isp login question to no, and set it into bridge mode. I managed to use Cisco Connect to connect the Netgear and the E2500, but there was no internet.
I logged into the E2500 and entered by ISP details in the PPPOE section. I went to status and clicked connect, but a message would eventually pop up saying that an IP address could not be found. In the Netgear I could set up VPI and VCI etc manually, but can't find those settings in the E2500. My ISP also requires a dynamic IP - does this mean that DHCP must be off in both the Netgear and the E2500?
I factory reset the E2500 and tried Cisco Connect again, but it said that it couldn't find the device.
View 1 Replies
View Related
May 4, 2011
How to find my own security key? network gear router dg 834g v4
View 1 Replies
View Related
Aug 9, 2011
I have two routers. One is Netgear WG602 v3 and Netgear WNR2000. WG602 v3 is connected with internet. I want to make a wireless bridge. How?
View 1 Replies
View Related
May 9, 2012
I have a Cisco 881W and I would like to basically some how bridge the Cisco router to my netgear router. This is what I'm trying to achieve:
Cable Modem ----> Netgear Router ~~~~~ via wifi ~~~~> Cisco 881W ------> FastEthernet Ports
I've tried setting the Cisco 881W with station-role non-root with the SSID of my netgear router, but I get the error %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response whenever I try to bridge it.
Is bridging the Cisco router via wifi to the Netgear Router something that is not possible or is it an error on my part?
View 2 Replies
View Related
Mar 8, 2013
I am on Sky broadband and have got the new Sagem 2504N router and have the old Netgear DG834GT router set up in my bedroom as a 2nd wireless hotspot and was wondering if it is possiable to set the netgear as a wireless hotspot/bridge to boost the range of the existing wireless signal rather than having two diff wireless hotspots and having to manually change between the two ? They are both ADSL routers, obvi the Sagem 1 being the 1 connected to the telephone line and the Netgear 1 being used "Passively" via a CAT5e cable from my switch i have in my bedroom?
View 8 Replies
View Related
Jul 8, 2011
My primary home wireless is a Linksys WRT54GS Broadband Router. I have an older Netgear WGR614 Wireless Router that I would like to setup as a wireless bridge to use in another room to connect my other electronics to (i.e tv, blu-ray, Wii).
View 3 Replies
View Related
Oct 26, 2011
I have a Netgear DG834G ADSL2 Modem/Router. I am currently connected through a wired network connection and wireless. With both forms of connection active does my Dell XPS give priority to the wired connection or the wireless connection if wireless is enabled?
View 1 Replies
View Related
Jun 15, 2011
Everyone's 2wire works in bridge mode of they follow these steps url...but when i try i get no internet connection nor does it pick up any internet activity. I even input my account and dsl password in the netgear router gateway still no luck.I'm trying to use the netgear router because in my room i only get 2 signals bars and if i switch to the netgear wireless N router the signal strength would be alot better.
View 7 Replies
View Related
Sep 22, 2011
I am having an issue with my netgear router dg834g
last night my router just stopped working when i was on the internet. I looked at my router and the power light and tick were flashing. After disconnectibg the power a few times this continued so i called it a night and left it disconnected.
Tonight i turned it back on and all looks fine on the router but on the pc it will now not connect and says the dns server isnt responding.
Maybe its a problem with my internet provider (orange) so not sure but its frustrating lol. Dont know a lot of the techical stuff i was using it fine for over a year withoit any problems.
View 4 Replies
View Related
Mar 6, 2011
I want to get a Linksys E3000, mainly because it stomps all over the competition in this bracket for wifi throughput.But I have forgotten how to set up the DG834G to act as a modem for the E3000 going from the DG's LAN port to the E3000's ethernet WAN/Internet port?
View 5 Replies
View Related
Jan 20, 2012
I have a Netgear DG834G v4 wireless router/modem, im experiencing a bit of a problem, when i ping google from my desktop which is connected via cable to the modem, i get a packet loss after about 15 seconds each and every time but when i dot the same from my laptop via wi-fi, well, there's no packet loss.. since i play most of my online games from my desktop, this is a bit of a problem for me..
View 1 Replies
View Related
Apr 24, 2012
Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?
View 7 Replies
View Related
Apr 27, 2011
How do I convert an old WRT 54G 2 to a wireless bridge.
View 1 Replies
View Related
Jan 17, 2011
I need to figure out a network setup for my house between modem connected to one wireless bridge connected to another wireless router connected to wired router.The reason why I decided to make this evil setup is due to insufficient range between my wireless router and desktop pc upstairs. However, in the room next to it I have a very good wireless signal and a possibility to bridge it to wired network installed in my house. But in order to do it I guess I need to bridge that wireless signal via wireless router or bridge to wired network. [code]
View 7 Replies
View Related
Jul 24, 2012
I have 2 routers and would like to create a wireless bridge/repeater between them so i can extend my wifi range. Is it possible to do this? and How would I do it.
Router 1: Aztech hw 550-3g
Router 2-Link DWR-113 3g
View -1 Replies
View Related
Sep 2, 2012
I have a laptop with a wireless adapter. I have a desktop without a wireless adapter. Both of these pc's have windows 7. I have the laptop and desktop connected by an ethernet cord, and the laptop has a wireless connection to the router. In Network Connections under the control panel, I used the Bridge Connections option to bridge the pc's together.At my friend's place, this is usually the end of this process as my desktop will have internet access and run fine. At my own place, however, the desktop will not have any internet until I set a static IP for it. Also at my place, games on the desktop tend to run with a lot of lag due to the internet.
- My friend has a cheap $30 ASUS router, i don't know the exact model of it atm
- My place uses a motorola sbg 6580 modem/router
View 1 Replies
View Related
Oct 26, 2012
We have a WIRED network and a WIRELESS network at work. I start downloading a big file over the wireless network. I realize that it is slow, half way thru the processs there any way, I can set up the network, such that, DURING the file transfer process, I can switch from wireless to wired, without any disruption?...
View 5 Replies
View Related
Jul 3, 2012
I'm trying to set up my desktop using windows xp and a tl-wr541g v7 router to an existing wireless network from a mac using a tl-wr941n router.
I tried using this guide [URL] I followed it and set up all the settings the same but it just ends up cutting everyone off connected to the wifi
I know both these routers support bridging and they're from the same company but I don't know how to set them up.
View 2 Replies
View Related
Jul 23, 2012
I've already done plenty of web search and gone through various forums. That's how I've gained knowledge of setting up wireless bridge. But for some unknown reasons I haven't been able to successfully pull it off. Let me explain.I have an ISP provided modem+wifi device. Its called PTCL Modem. I normally connect my laptop and other devices through its wifi. I need to extend the signals around my workplace. So I have bought a TP-Link wifi router (TL-WR740N). Both these devices support wireless bridging according to their admin settings. I'll go pic-by-pic to explain what steps I performed.Pic1: PTCL Modem wireless bridging options. It shows two options for AP Mode: Access Point and Wireless Bridge. And it shows three options for Bridge Restrict.
Pic2: TP-Link router home page Pic2a: I first change the TP-Link's IP Address, because the PTCL Modem's wireless is also using the same IP address (192.168.1.1) so the current address will conflict with it. I change the router's IP address to 192.168.2.1. It goes for a restart.Pic3: Next I turn off the DHCP Server, as suggested by various blogs and forums. Router goes for another reboot after saving this setting.Pic4: Now I go to Wireless Settings page and set Enable WDS on. It shows me bridging options.Pic5.
I click the Survey button and it shows me a list of wireless devices in its range along with their BSSID and Channel number. I select my PTCL Modem access point which is on Channel 6. My PTCL Modem's wireless is set to WPA2-PSK security with the password "********". I also set the Channel on my TP-Link router from Auto to 6, to come in line with PTCL Modem's wireless. Clicking Save makes router goes for another reboot.
View 8 Replies
View Related
Jan 22, 2011
I have a thompson wireless modem which is the one from my internet provider and I want to use my Dynex DX-WEGRTR router as a wireless bridge and I've been struggling a couple day now.My primary wireless modem uses the 192.168.1.254 address.I already enabled the Dynex wireless bridge option and assigned the 192.168.1.2 address and the same WEP, SSID, chanel, subnet mask as the primary wireless modem. I also set the Dynex gateway and DNS to 192.168.1.254
View 3 Replies
View Related
Jan 24, 2012
I have a piece of hardware (audio device) with Ethernet network access only. I'd like to give it to my users and have them connect via Wifi. But configuring a Wifi bridge for each use is too onerous. I'm looking for a wireless bridge device with a display and keypad that allows the user to scan, select and associate with a wifi router, then bridge the wireless network to ethernet so I can attach my device. Does such an animal exist? Price is not a major factor.
View 5 Replies
View Related
Mar 9, 2012
I found the 120N at work and so far it seems to be garbage and a headache.Just moved into an apartment and was debating running 30-40ft of CAT6 from bedroom to living room and see if I could set up a wireless bridge with the 2 routers.I have an WRT54G I left behind as well, which I'm thinking to get back since it had Tomato and lot more capabilities.Its a railroad style apartment so walls aren't an issue really.Thinking to maybe even move the main E1000 to mid way point for best coverage.
View 4 Replies
View Related
Jun 19, 2011
my wireless router that is connected to the internet is in the basement and my computer is upstairs on the second floor of my house. Because of this the signal is very bad, to fix this problem I bought a Belkin Wireless N300 in order to create a wireless bridge but I am having trouble. My downstairs router is a D-Link DI-524 and I have googled all over the place to find a solution but the belkin router doesn't have a wireless bridging option...
View 2 Replies
View Related
Jul 31, 2011
I have a wired and wireless network setup at home with 2 PCs wired and 2 PCs using wireless via a Fritz!Box 7390. The 2 wireless PCs are a Media Centre PC connected to the TV and the other is my young sons PC. I have an old switch (10Mbs) that I would like to connect to the Ethernet port of the Media Centre PC and then run Cat5 to 2 Topfield PVRs so they can access the internet for updates.I know I have setup a bridge between the wireless connection and the wired but not totally sure what to do and how to get the switch setup.The Media Centre PC is running Windows 7 Home Premium SP1 and has a Belkin USB wireless tongle.
View 8 Replies
View Related
Aug 12, 2012
Can we use Cisco aironet 1152E Mesh AP as a Point - to - Point bridge connecting 2 sites 1 Km apart.
View 5 Replies
View Related
Jan 7, 2010
i am placing a formal request to Cisco and to the firmware development team to create a new-and-improved firmware release for the WET200 wireless Ethernet bridge, a product that is still being produced, shipped, and sold. I purchased the product about one-and-a-half years ago and have enjoyed its performance. There have been, however, some flaws with the device, namely the following:While configured to use WPA2-based security, DHCP-related traffic is not passed from a router/gateway's DHCP Server to connected devices on the WET200. Current firmware release notes indicate this was a known issue and was, supposedly, fixed; however, due to the level of problems customers are reporting, it appears this may have only been resolved, if at all, with security configurations of WPA, WEP, or OPEN. It has not been fixed for customers using WPA2-based security.When I originally purchased the WET200 and configured it to use WPA2-based security, while it, initially, did have a few problems connecting to my router/gateway, it, eventually, did connect and stayed connected for, approximately, one year. However, in September of 2009, it suddenly lost connectivity with my router/gateway and has not been able to establish a connection since, even after reinstalling the latest firmware revision and after several soft and hard resets of the device. I tested the WET200 with another router/gateway, only to experience the same issue. Other devices are connecting to my router/gateway, but, not the WET200. The last firmware update for the WET200 was dated back in July of 2008. Currently, it is January 2010 and since these issues have been known for quite some time, it is unacceptable that the firmware for this device has not been updated in such a long time, especially when there are known issues with the WET200's firmware. Such lack of support is forcing me and my clients to stop using these Cisco-based products and purchase competing hardware, something I would prefer not to do; however, without better support, I and my clients do not have a choice. Expecting me and my clients to use an inferior form of security on the WET200, such as WEP and/or WPA, until a firmware update is issued is unacceptable, especially when that update has not been released in over one-and-a-half years. Such lack of support is especially unforgettable when my clients and I are looking to purchase new networking equipment. In the past, I would not have hesitated to purchase a Cisco-based product; now, with this experience in mind, I am finding it very difficult to recommend to a client that he or she should invest their organization's finances into Cisco-branded equipment. Proper, professional, timely, support of your hardware is expected of your customers, especially if you wish them to remain loyal customers. I have noticed that other similar devices, albeit, higher-end devices, have had their firmware updated, more recently, compared to the WET200. I assumed this meant that the firmware development team was updating all firmware on such devices. So far, I have been disappointed in the lack of firmware updates for the WET200. While I understand the possible desire to update the higher-end products, first, as a professional whose job is to research, recommend, purchase, install,configure, secure, and maintain both the enterprise-level and small business-level devices, I highly encourage Cisco not to overlook their small business products when the firmware development team is updating firmware for any Cisco products. Deficiency in the support of one strata of Cisco-based products is reflective upon the support of any Cisco-based product and is not easily forgiven by Cisco customers, such as myself, when new and additional hardware needs to be purchased.
View 15 Replies
View Related
Jan 19, 2011
Due to lack of wires we decided to extend our network by using WET546 bridge by linksys. Ideally we looking to create topology like this:
(Computer)--eth--(WET546)---wireless----(AP/WLC2100)---(router)---(Internet)
WET546 successfully authenticates and looks pretty healthy on controller (see below) , however neither of computers plugged to WET546 was unable to obtain ip address from dhcp server , nor working with static ip. I was under impression what it might be related to some default policies on WLC2100. Logs (warning) on WLC2100 looks clean.
View 8 Replies
View Related
Jun 16, 2012
I'm considering purchasing the "Cisco Linksys - E1200 Wireless-N Router with 4-Port Ethernet Switch". Before I do, however, I want to know how to configure it as a wireless bridge to my existing wireless network.I have a hardware device with only an ethernet connection (no wireless option avaialble). I want to connect the device to a wireless router / access point, in this case it would be the e1200, and then connect to my existing wireless network. The e1200 would be acting like a client of the existing network.I found this article but Step 8 is causing concern. I do not want a wired connection. The two routers must connect wirelessly.
View 8 Replies
View Related
Aug 16, 2012
I need an AP that can run in client bridge mode. By that I mean a device that can be connected to a PC via the ethernet cable and provide wireless access because these older devices don't have wireless network cards?I looked at the WAP321 but it just uses a wizard. I need a device with IOS so that the PSK keys can be encrypted when viewing. I need to have the config backed up and the PSK can't be in clear text.
View 5 Replies
View Related
Nov 15, 2012
What is replacing the 1310 AP's in order to create a wireless bridge between sites?
View 3 Replies
View Related
