Using A Linksys Router As An Access Point?
Oct 8, 2011Can i use linksys as an access point?
View 1 Replies
ADVERTISEMENT
Linksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?
Nov 1, 2012How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies View RelatedLinksys Access Point :: WRT54G - Unable To Find Access Point In Home Network
Aug 29, 2009I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1. My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
I found directions in the forum for a setup using the LG BD390 but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi.
Linksys Access Point :: WAP54G Access Point Setup After A Reset?
Jul 9, 2006I had to reset my access point but the login screen fails to appear to lock the router. I don't have the setup wizard disk.
View 9 Replies View RelatedLinksys Access Point :: WAP54G Possible To Downgrade Firmware From Access Point
Jan 17, 2013I have a WAP54g hardware version 1.0.I install de last firmware on this access-point but, this access-point reset automatic after a random time..It’s it possible to downgrade de firmware from this access-point?
View 1 Replies View RelatedLinksys Access Point :: WRT320N Access Point Vs Range Extender
Dec 14, 2011Have a WRT320N router at one end of the house in the basement. Would like to boost signal to other end of the house. Which product should i use, an access point or a range extender? My house is also wired with Ethernet cable and I could plug the access point into an Ethernet port at the end of the house where the signal is weak.
View 1 Replies View RelatedLinksys Access Point :: WAP4410n MIBs Or OIDs For Access Point
Jul 3, 2012I have AP WAP 4410 N, and I want conected AP to cacti. Where is I faoun MIBs or OIDs for my Access Point?
View 1 Replies View RelatedLinksys Access Point :: WAP54G Access Point Unable To Connect To More Than One PC?
Apr 25, 2011I've got a AP WAP54G. I've managed to get into the configuration page and rename my router and set a WPA2-Personl password.
The issue I'm facing is that when me and my roomate try to connect to the router at the same time, it shows the laptop that connects second as one that has 'limited connectivity' and hence cannot use the internet. The 1st laptop however works fine!
The settings for the router have all been left to default.
I'm not sure, but does this problem have anything to do with the fact that the router in configured with a static IP. If so, then there is another issure which is that whenever I try to change it from static to automatic/dynamic IP, the page fails and the router doesn't even get connected to the configuraion page(192.168.1.245) after that. The only way to get that page again is the reset the router.
Also I'm not able to directly get into the config page when I connect my router to my laptop via lan. I need to change the LAN IP to 192.168.1.x where x is >1.
Linksys Access Point :: Repeat WAP54G Access Point?
Aug 25, 2011What I want to do is the opposite of most configurations. I live on a small island with only one DSL connection. The modem is wired connected to a WAP54G Access point. To extend this access point want to use a WRT54G.
View 4 Replies View RelatedLinksys Access Point :: WRT120N - Cannot Connect To An Access Point
May 10, 2013I'm using a WRT120N and have had no problems connecting most wireless devices, but a Nintendo DS and DSi owned by my family are unable to connect to the access point. My wireless security mode is disabled, network mode is set to mixed, SSID is the same as on the DS/DSi, Channel width is 20Mhz only, Standard channel is set to 6, but I tried using channel 1 and 11 without success, SSID broadcast is enabled.
I've tried every work-about I could find and always get the 51300 error code, and am at a loss as to what else I can try to get the devices to connect to the access point.
Linksys Access Point :: Configure WRT120n As An Access Point?
May 1, 2012Is it possible to configure WRT120n as an access point?
View 1 Replies View RelatedLinksys Access Point :: E3000 Configuration As Access Point?
Apr 6, 2011I have 3 E3000 Routers and would quality input regarding using 1 of the E3000 Routers connected to my Broadband Modem (Roadrunner) and would like to know how to configure the remaining 2 E3000 Routers to be hardwired to my main Router as Access Points located approximate segmented 1/3rd areas throughout my house which really is only 1800 Sq.Ft. in area. How to be configure these routers as access points as well as configuring the main router that will be connected to my broadband router. This is my first network to utilize streaming video, Internet Television Programs, Internet Radio, Accessing the Internet in all rooms of my house and outside the immediate adjacent patio area.
View 1 Replies View RelatedLinksys Access Point :: Way To Find Mib For WAP54G Access Point?
Feb 10, 2012I have tried to find mib for my Linksys WAP54G acces point without succeed. Any body know how I could find it?? I want to program a software based on SNMP protocol. Is there some databses for mibs?
View 1 Replies View RelatedUsing 2nd Linksys Router As Access Point?
Jun 6, 2011I have two routers, one is NETGEAR with the MACINTOSH computer and the other is LINKSYS wireless G...what I want to do is make the the LINKSYS router an access point for my network and need to know how to do so.
View 1 Replies View RelatedLinksys WRT54GL Router - Access Point Causes Lag?
Jun 9, 2011In our house we use a Linksys WRT54GL router. When I am connected to the router via a cable I can play an online RPG without any problems.I recently connected an acecss point to the router ( a belkin N1 ). Even if I am connected with a cable to the accesspoint, which is connected to the router by cable as well, I get huge lag spikes about every 10 seconds while playing the game.
View 10 Replies View RelatedUse Linksys E2000 Router As A Access Point?
Mar 13, 2012How can i use Linksys E2000 rounter as a Access point ?
View 1 Replies View RelatedSetting Up Linksys Router As Access Point?
Mar 21, 2011i have a verizon usb720 modem. i want to set up my wirless printer. Previously i had this set up by a profesional. I bought a new computer and am now trying to set this up. I have a linksys router as well wrt54g how is tis done. you cannot connect anything to the modem but i have read that you can turn the router into an access point.
View 10 Replies View RelatedUsing Linksys E1000 Modem Router As An Access Point?
Aug 17, 2011I have a linksys e1000 modem router as the wireless internet connection in my home, now I bought a new one linksys e1000 to use it as an access point to cover the uncovered area, How can I do that?
View 1 Replies View RelatedHow To Configure Wireless Access Point To Linksys Router
Jan 18, 2011How do I configure my Linksys N Router for a Netgear Wireless N Access Point set in repeater mode? Linksys and Netgear are communicating, but no Internet access is available on Netgear which makes me think I need to configure Linksys to provide Internet connectivity to the Netgear access point repeater.
View 1 Replies View RelatedHow To Configure Linksys Router Wtr120n As An Access Point
Jan 14, 2012I have a linksys wireless-N router model number is WRT120N and I need to use it as an access point. How i can do that?
View 1 Replies View RelatedInstall Linksys Wireless Router To Access Point?
Jun 19, 2011How to install linksys wireless router to access point?
View 1 Replies View RelatedLinksys Wrt310n - Setting Up Second Router As Access Point
May 26, 2011My internet provider is telus and they gave me a modem/router combo model VA-G3810bn/tl and another router a linksys wrt310n and i want to by pass the router built into the modem so my linksys will put out a signal instead as it is faster connection any im using windows seven and mozilla firefox if that matters
View 1 Replies View RelatedHow To Setup Linksys Wireless Router As Access Point
Aug 14, 2011Can I use a second linksys wireless router as an access point and can I connect a wired computer to one of its ports?
View 1 Replies View RelatedLinksys E4200V2 - Recommend Router To Be Used As Access Point
Dec 11, 2012I am using a Linksys E4200V2 for my routing needs. I have 6 hardwired connections and 9 wireless connections. Due to my hardwired connections all going into one corner of my basement my router is placed there. When I had an E3000 my wireless coverage was fairly acceptable. After a power surge took out a bunch of stuff (which I have remedied with a whole home surge protector and better surge protectors for my devices) my E4200 replacement just doesn't have as good of coverage, especially in our office. This renders wireless to our phones/tablet useless in there (wife's laptop and my desktop are hard wired when in the office). I have a fairly large home so no wireless router is going to give me great coverage in my office, which is furthest from my router and has a bunch of obstructions to go through.I want to do an access point. I tried with an old Belkin Wireless G router, but it is only working when it wants to and there is probably a reason I stuff it in a box years ago. Of course I gave my other working Netgear N-router to my mom...so I'm out of wireless routers.
I want to buy something that:
- Is under $50
- Can do dual-band wireless N
- If it has Gigabit Ethernet ports that would be sweet as I could make use of them, but I can live without
- Can either repeat the wireless signal from my Linksys or be hard-wired as I have Ethernet connections all over my home. I'd suspect there would be a performance benefit from a hard wired unit.
Usage - from a hardwired perspective, I do some heavy LAN file transfers and high-bandwidth streaming on a semi-regular basis. For wireless, some random downloading (nothing time urgent), surfing and video streaming off the web is about it, and Airplay from our iOS devices (iOS stuff is only Apple stuff we have, rest is Win 7/8 and Android) with Apple TV being hardwired.
Linksys Wireless Router :: Using WRT160N V2 As Access Point?
Mar 22, 2013I have a FIOS setup with their Router/modem providing DHCP and Wireless routing. The problem I have is that I have a mix of older equipment and newer equipment. The newer equipment is capable of supporting WPA2, the older is not. I would like the benefits of WPA2, but still would like to at times be able to use the older equipment.My solution was to use a WRT160N v2 router that I had as an access point and it also gives me switch capabilities for wired systems as the FIOS router in on a different floor than the Linksys router. Wired access works just fine and the wireless worked fine until just recently.Since both routers have the same default IP addresses I changed the Linksys to a different static IP and turned off DHCP. I left all of the other defaults the same. I set up the Linksys for WEP and created the key for security. Everything worked fine for the better part of a year, but recently I am having problems where some of the computers cannot find the network or find it then lose connection.
View 9 Replies View RelatedLinksys Wireless Router :: Using WRT320N As Access Point?
Feb 2, 2011I'm currently using my WRT320N router as an access point (connected to another linksys router), but I've lost my username and password to access the web-based utility. So I need to press the reset button and set it up again. Currently everything is working fine, but I've forgotten how to configure the router for this purpose, and I can't find instructions in the user's guide online. I seem to remember it being troublesome. I know I have to assign a different IP address (currently I'm using 192.168.1.113.) What other settings (if any) need to be changed?
View 2 Replies View RelatedLinksys Wireless Router :: Set Up E2100L To Be An Access Point?
Feb 24, 2013"Can I get my E2100L to receive a wireless signal from a different model Wireless Router and repeat it via wireless and Ethernet. Yes or NO?"
- If so, how, if u need to user guide here: E2100L User Guide
Linksys Wireless Router :: Use Wrt54g As Access Point?
Dec 11, 2011I am using a newer wireless router but would like to use my older wrt54g router as an access point (wired and wireless) at the other end of my house. how to do it, and what the specific settings should be, especially the security settings. I can connect the wrt54g via a homeplug (cannot run a LAN cable). I had previously tried an Aztech wireless homeplug but found the security feature to be worthless and everyone was able to "break-in".
View 3 Replies View RelatedLinksys Cable / DSL :: Way To Use WAG160N V1 As A Router And V2 As An Access Point?
Jun 30, 2011I have two routers and was wondering if it is possible to use one as a router and one as an Access point, do you know if this is possible and how do i go about configuring this?
Currently my wagN160N v2 is the one that my dsl is connected to, but how do i go about sharing this to my other router and making the WAG160n v1 the access point?
Linksys Wireless Router :: Can EA6500 Be Set Up As Access Point?
Mar 2, 2013Can the EA6500 be set up as an access point connected to a remote router which has a connection to the DSL modem?I want to replace one of my wireless access points with a faster wireless interface, but this will be connected via hard wire CAT-5 cable located away from my modem/router.
View 3 Replies View RelatedLinksys Wireless Router :: Using E3000 Just As Access Point?
Mar 1, 2012I have a Cisco RV082 and I would like to connect my E3000 to it and use it as just a wireless access point. Is it possible to do this with the E3000 so the RV082 is providing the routing functionality?
View 1 Replies View RelatedLinksys Wireless Router :: Which Access Point To Be Used With WRT160N
Jul 28, 2011I have a Router WRT160N and need to connect an Access Point using a wireless bridge (i.e. cannot use cable between router and AP). Which Linksys Access Point model is recommended to use with this router?(No I dont want to use another WRT160N with DD-WRT!)
View 1 Replies View RelatedD-Link DIR-655 :: Connecting Linksys Router As Access Point?
Mar 21, 2011My home network currently has a Linksys router (essentially acting as a wireless access point) in a distant part of the house connected to my main router, a Netgear WNR2000, and this configuration is working fine.
I want to replace the main router with a new D-Link DIR-655 (better parental controls). When I swap in the new router and get the cables plugged in in the same manner as they are in the Netgear router, computers connecting wirelessly to the Linksys router can no longer access the Internet.
The Netgear router is set up with an IP address of 192.168.4.1. The Linksys is 192.168.2.1, and the D-Link is at the default 192.168.0.1.
