WRT54G Can't Get Port Forwarding To Work

Jan 2, 2011

My ISP is centurylink and I have a 660 series modem that is both a modem and a router (no wireless). Also I have a Linksys WRT54G v3 wireless router with Tomato Firmware on it. For whatever reason I can't get the port forwarding to work. Yes, I know I have to forward the ports on both and I have tried using this guideurl...Fowarding.php on the modem, with Tomato Firmware it is super simple to forward.

View 13 Replies


ADVERTISEMENT

WRT54g - RDP Connection / Port Forwarding?

Jan 31, 2011

I've got a pretty simple setup where port forwarding was working without a hitch.My old router (wrt54g) was forwarding RDP requests (over 3389) to my computer's ip. No problems. Then I switched it out with a WRT160N wireless router (and upgraded firmware), and I just can't seem to make the connection.

I've followed all the simple tutorials, ala:

[URL]

Still no luck...! I've ensured my ip is the one the router is pushing connection attempts to, dropped firewall and filtering... still nothing (I've even tried connecting from within the network, using my computer's name) without any success.

View 3 Replies View Related

Routers / Switches :: Port Forwarding On Linksys WRT54G?

Nov 11, 2011

Port forwarding on my linksys is not seem to be working from outside the network. It works fine if I try on the same network. External ip address: 69.117.132.xxx Ports from 8080 through 8080 forwarded Internal ip address: 192.168.1.150 - static ip address assigned to the webserver. I understand 80 could be blocked by the ISP. Can 8080 also be the same case?

View 12 Replies View Related

Linksys Wireless Router :: WRT54G V8 Port Forwarding?

Mar 30, 2013

I'm trying to forward my ports and I've been following a guide from [URL]. It's simple, but it's not working for me. I couldn't find my router on their list, so I'm assuming the worst and that it's not supported for the Port Forwarding. I just went with the normal WRT54G without the version 8 and tried it that way, I didn't get anything out of that either. It keeps telling me that the port isn't open and I can't receive the information packets that they're sending me. 

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Port Forwarding Setup

Feb 12, 2012

I'm trying to set up my WRT54G wireless router so.i can port forward the relevant ports for my programs. I understand that you have to set up a static ip address before you can do a port forward which makes sense as you do not want to keep changing the ip address for the forwarding settings every time your network refreshes. But I cant seem to have it set up. And is there a rule that the static ip that you set should not be within the dhcp range?After setting up the static ip and setting up the port forward settings how do I test if the port is being forwarded correctly?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Port Forwarding Suddenly Closed?

Oct 12, 2011

i have a 54G wireless home router ..... successfully port fowarded an application from a CPU (server).... but after no connection made from the user to the server.....  it suddenly close the application ..... so what i did is to reboot the router in order to refresh the connection ......  Is there any other ways to fix this sudden close of the ports ?

View 9 Replies View Related

DMZ Mode And Port Forwarding Doesn't Work?

May 22, 2012

Jason9 i'm having the exact same problem as above, don't mean to hijack but I'm using talktalk isp, I have AVG 9.0 and have a static IP and forwarded the required port on the router.

View 19 Replies View Related

Port Forwarding Doesn't Work Anymore?

Jul 25, 2011

I have a W7 PC 64 bit system and I've been trying to port forward the port 25565 for my Minecraft server. However for some reason (even after port forwarding the right one) people still can't connect. When I check on Open Port Check Tool - Test Port Forwarding on Your Router It still says that the port 25565 is closed!I've even created an Inbound and Outbound rule in the Windows Firewall advanced settings. I use Avira Anti-vir fyi..

View 19 Replies View Related

D-Link DIR-655 :: Port Forwarding Doesn't Work From LAN PC?

May 12, 2011

Edit I've found a work-around. It's on page 2: [URL]

I'm having this really weird issue with my DIR-655 revB. I have some port forwarding rules set up and externally they work fine. However, if I try connecting to my IP address using those same ports from a computer within my LAN, it won't connect.

Externally, I can ping my WAN address and connect through forwarded ports. No problems. Internally, pinging my WAN address apparently works (just now is the first time that's worked for me), however I can't access any of my computers using the WAN IP and port forwarded ports. I can access them by going directly to their hostnames or LAN IPs.

Things I've tried:

-Disabling/enabling firewalls on all computers involved

-Disabling/enabling QoS engine

-Disabling/enabling DNS relay

-Disabling/enabling Advanced DNS

-Adding custom nameservers from Google and Comodo

-Restarting computers

-Clearing DNS cache (I use a dynamic DNS name which works externally but not internally. This gets the correct IP internally and connecting directly to the IP doesn't work either.)

-Modifying the NAT Endpoint Filtering settings

I have an external DSL modem connected to the router using PPPoE if it matters.

The weird part is that it works externally but I've modified all of the values I can think of in the config with no luck. I upgraded to the DIR-655 from a DIR-615 which had all these settings in it and worked fine (until it started acting up which is why I replaced it).

View 14 Replies View Related

Cisco WAN :: Port Forwarding On 1841 Don't Work

May 9, 2011

I'm trying to setup port forwarding to a citrix server but, it seems not to be working.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G - Default Username And Password For Port Forwarding?

Jan 24, 2013

I have a WRT54G Linksys router and I am wondering what is the default username and password for port forwarding?

View 1 Replies View Related

Ambit U10C037 - Port Forwarding Doesn't Work?

Mar 26, 2011

I have been trying so hard to get the following ports to work:

5120 - 5300

I have looked up countless guides, and have done everything in them, I have a static IP, I used the gateway to create the port forwarding rule, AND opened the ports on the windows firewall.

Nothing works. The port remains closed, and I can't host games. My modem is an Ambit U10C037

System Specs:
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel Pentium III Xeon processor, x86 Family 6 Model 23 Stepping 6
Processor Count: 2

[Code].....

View 12 Replies View Related

Cisco Routers :: RV180 Port Forwarding Not Work

Aug 12, 2012

Today i installed an RV180 VPN router as replacement for a netscreen ns-5GT.Exactly the same configuration, everything works, except port forwarding from WAN to a host inside NAT.My ports are open (online port-scanner sees the ports as open), the hosts are accepting connections, but a connection can't be made.Probably a bug in the firmware.

View 30 Replies View Related

D-Link DIR-655 - Why Doesn't Port Forwarding Work Correctly

Jul 27, 2012

First off, my router is a D-Link DIR-655, firmware v2.07. I'm trying to port forward port 25565.

My port forward settings are this:

However, when I use this open port checker, it claims that I don't have that port open. It looks like this, without the blurred out parts:

Added note: The way I want to use it is by my IP (xxx.xxx.xxx.154:25565). I have the software installed to do so (I'm using a minecraft server, connecting through minecraft), but I can't enter my IP in the IP address field, it says that it's out of the range of the LAN.

View 2 Replies View Related

Netgear WRG614 - Port Forwarding From Modem But It Doesn't Work

Feb 26, 2011

I have a Netgear WRG614 and a Westell 610015 Modem. I need Port Forwarding. I have tried setting up a static IP then Port Forwarding but it doesn't work. I have tried port forwarding from the modem but it doesn't work. I wanna forward ports "80, 9958, and 5816". The reason is because I am gonna host a game server on my computer.

View 14 Replies View Related

Linksys Wireless Router :: E4200 Port Forwarding Does Not Work?

Aug 18, 2012

I set up my new E4200 to forward port 7300 to a computer on my LAN.  I had this working on my Linksys WRT160N and copied all of the settings so they are identical to those on that router but forwarding does not work.  I have tried single port forwarding, multiple port forwarding and even DMZ with the same lack of results.

View 9 Replies View Related

Linksys Wireless Router :: E2500 Port Forwarding Does Not Work

Apr 2, 2012

IPort forwarding simply does not work with this rounter on Comcast. I called comcast to see if they were blocking ports and they insist they ARE NOT.So what can it be? Was on FIOS with their modem/router combo and port forwarding worked like a charm with them.I've tried single port forwarding, port range forwarding, yada.
 
I am using the correct internal IP address on the machine I want to enable port forwarding on..Latest firmware is installed 1.04 or whatever (just purchased the router and updated during the Cisco Connect install on the 29th). Guess I should go find a cheaper router that actually works...

View 7 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND - Port Forwarding Does Not Work?

Mar 10, 2013

Region : Italy
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120720 Rel.09287
ISP : alice

A couple of weeks ago I have bought a TD-W8961ND in replacement of my old modem/router (of another brand, to upgrade from Wireless G to N). I tried to replicate in the new router something similar to my old setup, so I programmed Virtual Servers (under the NAT menu) with the following rules: NATRules.jpg in an attempt to:

- grant access from "outside" Internet to my web server

- have a Wakeup-On-LAN from "outside" Internet ..etc.. without success. Please note that:

- I have successfully setup a DDNS server to reach my modem router from outside

- as for WOL, I defined my subnet mask as 255.255.255.128

- I have not set any other rule, nor in NAT, nor in routing or other

- I tried also with firewall disabled

- I do my testing by means of a smartphone with wireless disabled and Internet connection via mobile service provider

- Both the above mentioned functions were working with my old modem/router (and still work on LAN), and I have not changed other things (PC setup etc)

View 14 Replies View Related

TP-Link 3G/3.75G Router :: MR3420 - Port Forwarding Doesn't Work

Jan 24, 2013

Region : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version : TL-MR3420_V2_121206
ISP : 3

I am using a MR3420 V2 together with a E398 modem. The connection works well, but I can't do any port forwarding (virtual server). Using another router (Tiny Dovado) with the same E398 modem works flawlessly to forward ports.

View 14 Replies View Related

Linksys Wireless Router :: WRT160N V3 DMZ And Port-Forwarding Don't Work

Oct 19, 2012

i have a WRT160N V3 and DMZ or Portforwarding dont work.i tried locally following
 
WAN_PC-> WAN-PORT -> WRT160N V3 -> LOCAL-PORT -> LOCAL_PC
 The WAN_PC has a Static-IP 192.168.1.2, Subnet 255.255.255.0
The WAN-PORT has a Static-IP 192.168.1.1, Subnet 255.255.255.0
ON the WRT160N V3 i configured a DMZ on 192.168.0.100.and Disabled the Firewall.
On the LOCAL_PC (192.168.0.100:8888) is a Apache
 
So when i type 192.168.1.1:8888 on the WAN_PC i get NOOO Website from the Apache on 192.168.0.100:8888?

View 2 Replies View Related

Cisco Routers :: Configuring Port Forwarding To 443 And Having Client VPN To Work

Mar 2, 2013

I have a problem configuring port forwarding to 443 and having client VPN to work.When 443 is NOT forwarded, VPN just runs fine (QuickVPN).As soon as I enable 443, the VPN stops working. No client can connect.I have the latest 1.2.0.9 firmware.Is there a way to enable 443 and having VPN to work at the same time ? I need 443 for Exchange.

View 4 Replies View Related

Wnr834m / Adding Custom Service On Netgear Port-forwarding Will Not Work

Sep 16, 2011

I am trying to set up a custom service on my netgear configuration page. I have a netgear router model# Wnr834m. every time i click the "add custom service" button the page redirects to "system authentication failed" and logs me out. What can i do to set up the new port?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 - Port Forwarding / TCP And UDP Did Not Work Correctly

Jun 30, 2012

I have done this before on this exact model about a month ago, so it's still fresh in my mind on port forwarding. (note, I'm using firmware version: 1.0.00) I am running a windows 7 computer wirelessly using this router.What I do for port forwarding is type in router IP (192.168.2.1) in internet explorer, type in "default" as username and "admin" as password. I click the "applications and gaming" link which brings me to port range forwarding.

I fill in my port info, in this case a mine craft server running on 25565. I set up two of the same ports, different names both at the same port, one running TCP and the other UDP, when it worked previously the "both" option did not work correctly. (I used to have a private network that a buddy of mine set up a while back, and I doubt he remembers what to do and I don't know where the manual is to make a new one, searching the internet sends me spam of people asking questions.)

I read somewhere it may have something to do with DHCP server settings conflicting with my IP. My IPv4 address reads 192.168.2.100, and the DHCP settings says the same.

View 1 Replies View Related

Linksys Wireless Router :: WRVS4400N Single Port Forwarding Doesn't Work

Jul 1, 2012

Type: WRVS4400N Wireless-N Gigabit Security Router with VPN.I bought it last week. Its single port forwarding has an issue. I can only use that function for a couple or hours. Then the forwarding does not work. I have to reboot the router to make it available again. 

View 1 Replies View Related

Linksys Wireless Router :: E1000 / Port Forwarding Does Not Work Because Only One Or Other Xboxes Will Get Open NAT

Nov 14, 2011

I am having a NAT issue with my two xboxes. The router is an e1000 v2.1 firmware 2.1.02. One xbox is wired into the router and the other has a wireless adapter. The wireless xbox gets open nat automatically, while the wired one's nat is strict. If i mess with DMZ and turn UPnP off i can get the wired to be open but the wireless one to be strict. Also port forwarding does not seem to work because only one or the other xboxes will get an open NAT. I do have the the correct ports in the port triggering section set to on but that does not seem like it works.

View 5 Replies View Related

Cisco Switching/Routing :: 881W - IOS Port Forwarding Commands For Port Forwarding

Apr 7, 2013

I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.

View 1 Replies View Related

Cisco Routers :: RV042G - Port Forwarding To 2 Different Destinations Based On Incoming Wan Port

Apr 22, 2013

how to: port forwarding to 2 different destinations based on incoming WAN port
 
The default HTTP service works fine: TCP80/80-> 192.168.0.55
 
I have a couple of IP security camera's I'd like to be able to access remotely that also listen on port 80. I tried TCP & UDP 8009/8009-> 192.168.0.9 without any luck. Not sure how to handle the port redirects on the RV042G? Seems simple and was on the Symantec, could be user training :-)
 
I was able to do port redirect with the Symantec Firewall I'm replacing.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-8970 Port Forwarding To A Different Internal Port

Mar 7, 2013

Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media

Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.

View 1 Replies View Related

Cisco Firewall :: Change Default SSH Port On ASA 5505 (port Forwarding)

Dec 2, 2011

So here is my network.
 
ASA5505--->Cisco1841--->Cat2960
Code
ASA asa831-k8.bin
Cisco 1841 c1841-adventerprisek9-mz.151-4.M2.bin
Cat 2960 c2960-lanbasek9-mz.122-55.SE1.bin
 
and here is my dilemma.
 
I can SSH from the internet to my ASA on default port 22, directly to my public IP.  I can SSH from the internet to my Cisco 1841 on port 2001. I can not however, SSH to my Cat 2960.  From what i can tell, on the Cat2960 i can't change the default port 22 for SSH to different port, just like i did on the Cisco 1841.  I looked to see if I can change the default port for SSH on he ASA, it does not look like this is an option.
 
The bottom line is that i want to be able to SSH to all three devices from the internet.  I only have one public IP.  As of now, what i can do is only SSH to the ASA on default port 22 directly to the public IP and Cisco 1841 on port 2001.  It appears that changing the default SSH port on Cat 2960 is not an option.  It also appears that I can't change the default SSH port on the ASA, if i could, i would and then i should be able to SSH to the Cat 2960 on port 22. No matter what i did on the ASA, it always listens on port 22 for SSH connections.
 
show asp table socket
TCP       001f549f  <<pub IP>>:22              0.0.0.0:*               LISTEN
 
how do i make it listen on different port?
 
Here is relevent config for SSH for cisco 1841 (port forwarding)
 
ON ASA
object network ROUTER
host 10.10.1.1

[Code].....

View 28 Replies View Related

Cisco Routers :: RV042G Port Forwarding From Public Port To Internal IP?

Oct 11, 2012

Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23 ?
 
First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80

View 2 Replies View Related

D-Link DIR-655 :: Subsonic Port Forwarding / Get Machine - Port From Outside / Internet

Feb 16, 2011

I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server.  Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening.  However, I can't seem to get to the machine-port from outside/internet. 

I have tried Virtual Server and Port Forwarding with single port.  The server has a stactic IP which I've included in the DHCP range and outside the range.  I have a DSL connection (AT&T), modem only.  I have updated firmware.  I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct.  What am I missing?  Is if possible there is a defect in the router? (don't laugh).  Is there a way to trace a request to that port to see where it is hanging?

(yes, I've STFA, but don't know what else to do).

View 2 Replies View Related

Cisco :: Not Enough Port Fields In Port Forwarding For Linksys E4200

Jul 16, 2011

I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.
 
I have a centralized server which I use to access a mass of different services such as mail, dns, VPN, FTP, Kerberos, http and many more. While I am not a massive networking ****, this server setup is like my garage project. To access these services externally to my LAN as far as I understand I would need to configure port forwarding for each service to my server. Unfortunately the control panel for the linksys E4200 only offers about 15 custom port fields for forwarding, and some documentation I have read shows that with it's basic install my server could be using up to 60 ports at once.
 
Is this router just not suitable for this sort of network. If so I will be very disappointed because I have spent a quarter of the price on netgear routers with more control than this.

View 1 Replies View Related

Cisco Routers :: SRP541W Set Up Port Forwarding From External Port

Apr 13, 2013

I've set up port forwarding from an external port (9000) to an internal port (80) on our SRP541W, and for some reason, it's not working externally. If I access the public address from within the internal network, it works properly.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved