What Is The Data Contained In The Ping Command
Jul 18, 2011What is the data contained in the PING Command? and 32 and 64 bit PING how it differs?
View 1 Replies
ADVERTISEMENT
Cisco :: Testing ACL With Ping Command?
Sep 11, 2012why using ping to test the functionality of an ACL could proove insufficient?
View 9 Replies View RelatedD-Link DIR-825 :: Couldn't See Ping Command In Log
Feb 26, 2013Who is trying the ping www.dlink.com ? I have been used the model DIR-825 during 1 year, but I could not see that ping command in the log. I had experienced that my notebook alert that DIR-825's shareport has reconnected. Why the DIR-825 lost the private connection while I sleeping?Comment: DIR-825(IP: 10.10.100.97/28) is private using only. The internet gateway is setting to DIR-655(:192.168.90.97/29). [code]
View 1 Replies View RelatedPing Command On Two Directly Connected Computers?
Jan 16, 2012if you have two no of win 7 computer , and you run ping command at the same time at both PCs but the successfull at only one PC , second computer shows unsuccess full ping
View 2 Replies View RelatedCan't Connect To Internet Without Ping Command Activated
Jan 9, 2011I can connect to the internet after 5mins or so after booting up but after that internet will not respond at all.i need to restart again my PC in order to connect again to the internet i somehow manage to bump with this solution using ping command.whenever i boot my pc i need to open this command and i can surf the internet without getting my connection lost just as long ping command is open.
View 5 Replies View RelatedLinksys Wireless Router :: Start Ping Command Directly From E4200
Oct 9, 2011I recently acquired an E4200 Linksys router.Is it possible to connect to it using telnet (from LAN)? For example I would like to start a ping command directly from the router.I tried to telnet using command line shell from Windows and it failed to connect on port 23.
View 4 Replies View RelatedCisco Switching/Routing :: 3560G Can Ping Devices In Enterprise LAN But Cannot Ping Interface
Mar 31, 2012I have a new 3560G to set up a small network for a remote site. I configured the vlan and an SVI as the gateway. The switch is also the DHCP server for the LAN. I configured Gi0/2 as L3 port, connecting to the nearest neighbor. My network runs EIGRP so i advertised the routes into the EIGRP process. The switch forms EIGRP neighbors and learns all routes in the enterprise network. The problems I'm having now are: 1. The switch learns all routes in my enterprise LAN and can ping devices in the enterprise LAN, but I can’t ping any interface on the switch from the enterprise LAN. 2.
View 5 Replies View RelatedCisco Switching/Routing :: Can Ping From R1 To R3 SVI4 Gateway But Cannot Ping Host
Dec 12, 2011I set this up and I can ping all the gateways but never the hosts. I was hoping I could make these links between 6500's a mix of L2 and L3. Check it out. They are connected in a linear fashion R1--->R2--->R3. I can ping from R1 to R3's SVI4 gateway but I can never ping a host on that SVI4. I was hoping that I could use the port-channels between 6500's as routed links or as trunk links depending on the type of traffic....thought it would ease the migration. I suppose I could always get rid of the port-channels and just make separate L2 and L3 links between the 6500's.
View 3 Replies View RelatedCisco Switching/Routing :: 4.2.2 Unable To Ping 1 Internet Site From Edge Router Able To Ping
Jan 18, 2013From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies View RelatedRouters / Switches :: Windows Ping Success But Mac Ping Fails
Aug 15, 2011When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
Can Ping From Server But Can't Ping To Work Stations
Jan 26, 2012I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies View RelatedCan't Ping XBox 360 But Can Ping Other Devices
Mar 1, 2013I had both a Westell 7500 and a Linksys Router working fine and had my 360 setup as an extender for Windows Media Center so I could stream TV, Music, Movies, etc from my desktop to the 360. Then I switched my modem/router out with a Zyxel PH5001Z
So now today I noticed that I can no longer find my desktop through the XBox. I have adjusted my firewall settings on the modem itself, even completely disabling it. UPnP is enabled for the 360 and the device is showing under my device table. At first I wasn't able to ping any network devices but after creating an ICMPv4 Firewall rule it worked fine. I've confirmed the XBox IP Address through Network Map, the Device Table on the modem and through Network Settings on the XBox. I've diabled my modem firewall as well as Windows Firewall, completely and I still can't ping my XBox or set it up as an Extender.
I have the XBox connected wirelessly using WPA2-Personal and it's operating in 802.11g/n mode.
Cisco VPN :: ASA5510 Can't Ping VPN Clients But Clients Can Ping
Feb 29, 2012I have a strange issue on my ASA 5510 (8.4). I can't ping or connect to the VPN clients but the VPN clients can ping/connect to any inside resources. I have checked all the NAT extemtion entries.
View 3 Replies View RelatedCisco :: LMS 4.1 - No Data Is Available
Dec 8, 2011Just recently installed CW LMS 4.1. In the Configuration Dashboard you can see Discrepancies and Best Prctice Deviation. In our old 4.0 it shows a list of both discrancies and bestpracice deviation. In our new 4.1 we only see "No data is available", so I guess I need to do som work but can figure out where and what.
View 3 Replies View RelatedServers :: Copying Data To A NAS?
Jan 27, 2012I transfered both shares to the NAS last weekend, and plan on configuring the shares to be hosted on the NAS this weekend. In order to do this, I need to copy all of the changed files to the NAS in the most efficient way possible. I was thinking of using either xcopy or robocopy. What do you think? Is there a command in either one that would allow me to copy only changed data? I don't want to wait another 18 hours worth of copying to move all the information over AGAIN
View 1 Replies View RelatedBacking Up The Data On NAS Devices?
Sep 21, 2012I have several network shares in my home using two different NAS devices.I am looking for recommendations for backing up the data on these devices.I currently use CrashPlan for backing up my computers.I have 1 share (documents) that I would like to somehow get backed up to CrashPlan (I'm not specifically tied to CrashPlan, it's just what I'm using now). The rest of the shares I would like to just backup locally in the event of hard drive failure.I have tried having my iMac mount the documents share automatically and include that in the CrashPlan backup, but it seems unreliable.
View 6 Replies View RelatedWireless :: Cat 5 Data And Phone?
Jul 13, 2011I have a DSL wireless router in my house, I would also like to have wireless in my workshop. It's over 130 feet to the shop so my house router won't reach. when I built my shop I put an extra pipe in to pull phone line in but now I'm wondering if i can just pull in a cat 5 and get both data & phone.
View 2 Replies View RelatedBlock Isp From Seeing Data Received And Sent?
Mar 27, 2012How can I prevent them from seeing the data i receive & send i was told vpn was a route to take but after some searching i found a lot of threads saying different is vpn a best way to go about blocking my isp from seeing data received & sent
View 1 Replies View RelatedSetting Up 3g Data Card With Vpn
Jan 11, 2011i am tryin to set up a vpn with a 3g data card. i have got a "virtual ip" supplied by the program i am using (tunngle)i have go tit to as far as using tunngle but as soon as i click "network" in the actual game menu, it disconnects my internet automatically.
View 1 Replies View RelatedUsb Data Transfer Via Wifi
Aug 24, 2012I would like to conect a USB device to a computer using WiFi instead of the USB cable the device has. The thing is that I'm not sure about the drivers. Is there any USB Wireless device that transmits the USB data "raw" and the receiver plugged to the computer gets the data with the driver of the remote device in the own PC?
View 1 Replies View RelatedExtract Data From Internet?
Nov 21, 2012Can i extract data from this website?
View 3 Replies View RelatedCan't Transfer All Data From Old Palm To New
Sep 2, 2012I have a new Palm Vx and have installed Version 3 Palm Software followed by an upgrade to 4.0.1.This works fine with the new Palm but I can't transfer all the data from my old Palm (almost 12 years of stuff) to my new Palm.
View 1 Replies View RelatedHow To Share Data But Not Internet
Dec 11, 2011My computers are currently networked. I can share data and internet. I have a D-Link DAP-1522. How do I disable the internet from other devices? I can connect my main computer directly to the Comcast modem for access. But I don't want systems connected to the the access point - via LAN or wireless - to access the internet. i want employees to work and i also want to avoid the internet myself when not working at the main desk.
View 14 Replies View RelatedCisco :: Data Migration From LMS 3.2 To 4.1?
Nov 13, 2011Are there any methods for statistic data importing from old LMS 3.2 to a new LMS 3.1 version? I know about devices invemtory export/import function, but also i want to save all data gathered from previous time.
View 1 Replies View RelatedCisco :: 7.0.164.3 / Data Migration From WCS To NCS?
Dec 10, 2012I am working on a migration from Windows based WCS 7.0.164.3 to NCS appliance (1.2.1-once it is available). After stopping WCS, I issued the export userdata C:WCS07Migrate. The process completed, but did not create a single zip file. I found 2 files created in the tmp directory.
One contains multiple a folder called tempDirUserDataFromDb - containing multiple xml files; and another file called ImportExport_ca<number> which contains the maps. Was there something incorrect in my command? Can I use still use these files on NCS? Or do I need to redo the export on the WCS?
Cisco :: Migrating DFM Data From LMS 3.1 To 4.2.3
Feb 18, 2013I need to migrate DFM alarm settings data from LMS 3.1 to LMS 4.2.3 and I want to use this method, [URL] , to extract the data from 3.1 and then inport it into 4.2.3.
I successfully performed it for IP settings, it was easy since the data format was the same.
But the format differs quite alot for Interface and Port data, here is an example:
export from LMS 3.1
IF-hostname/17 [Gi0/0.524] [10.55.254.3]; INTERFACE:;IF-hostname/17; MANAGED_STATE:;EXPLICITLY_UNMANAGED
export from LMS 4.2.3
INTERFACE:IF-hostname/17 MANAGED_STATE:MANAGED GigabitEthernet0/0.524
It looks like I have convert interface names, sort and delete stuff to make it look the same.
Where To Find Recessed Data Receptacles
Feb 6, 2013Having a terrible time finding a single, dual or quad recessed 1 gang data receptacles! All I can find is 2 gang Electrical and Data combo's from Levinton like the one below. I already have Leviton's 1 gang duplex recessed electrical in the wall, and the cat6 keystones terminated in an MPLS wall box, so replacing both of these drops with the 2 gang outlet below would be a nightmare and I don't want to do it.
View 6 Replies View RelatedHome Network :: How To Transmit Data From C To S
Jan 5, 2012I have a client(C) and a server(S) nodes plus an intermediate node(I). Each node has a public IP. What I want to do is to transmit some data(whatever) from C to S but this data to go through I. So C ---> S will become C ----> I ----> S. I read something to create a tunnel(ip add tunnel) between C and I and add a route between them ? I tried different examples but did not work at all.
View 2 Replies View RelatedData Structure For Routing Protocols
Jul 14, 2011We know that every node in the network uses its routing table to forward the packets towards their destination. I have a doubt that which data structure used to implement these routing protocols.
View 6 Replies View RelatedOnline Data Exchange With Moderation
May 2, 2012I'm looking for an online-service, where I can share files. Something like a forum, but not to text, but to share files (mostly MS office files). Main criteria are:
1) Access only by an account created by the admin (--> limited amount of members)
2) possibility of moderation through admin (meaning that I can determine, who can access which folders, who can upload/change/delete files).Something like OLAT, moodle, or blackboard, for those who know, only smaller.Would I need to create something new or is there some service already existent, where I could rent space?
Data Structure For Routing Table
Feb 22, 2011Which data structure used to preparation of a routing table.
View 6 Replies View RelatedRouter With Data Logging Ability?
Mar 11, 2013Any Router that is capable of logging the amount of data down/up loaded from/to each connected device with amount of data and date and time stamp.
View 1 Replies View RelatedShare Data Files With Someone In A Different Location?
Feb 24, 2012How can I share data files with someone in a different location?
I have a particular question, and I get different answers from different tech people and salespersons at Fry's and Best Buy.
Here's my dilemma: my business partner works from home, while I am in the office using a Windows 7 desktop. This desktop contains most of the files. There are many times when he needs to access the files, so I have to e-mail them to him. It's become a distraction and slows down our work process. My question is what's the best solution to remedy this? What's the best way to share files and work independently of each other? Do we need to get a server? We're trying to keep down costs and I've seen that they can run pretty expensive. Do we need a NAS? Can we use another desktop computer as a "server"?
