I have a cisco(linksys) E4200v2 which my NIC card recognizes but am unable to connect to internet. cannot connect via cable as 6to4 adapter and ISATAP adapter will not start when cabled to router
View 1 RepliesAt first, it says "limited or no connectivity" and after reading possible solutions, it now says connected and has a very good signal but once I open Mozilla or Google Chrome, there's no internet connection. The icon doesn't also have that blue light that I think is an indication that it has internet connection. My roommate can connect to this wifi with no problems, her notebook is Acer, just like mine. We also have a wifi at home and it connects smoothly. I don't why I'm having problems with this aztech wifi here. Btw, I do not own this wifi or router. It's like an open network.
View 1 Replies View RelatedMy E3000 has been working fine with 1.0.04 build 6 FW. Recently some devices (kindle, iPad) can't connect to internet while connected to E3000 via WiFi network. Had a look my E3000 router IP is 192.168.0.1 but those problematic devices has IP 192.168.1.XXX allocated by DHCP not sure why. Currently I manually set up static IP 192.168.0.XXX for those devices.
View 1 Replies View RelatedI have experienced some strange behavior of WiFi connection using WRT320N router. ISP provides me the internet in 2 modes (day and night). During day mode max speed is 24 Mb/s and during night 60 MB/s. Modem ADSL (Cisco EPC3010) is connected to Linksys WRT320N and on router is configured WiFi.Now issue. In the day mode everything is perfect. Cable connection gives me 24 MB/s and WiFi connection around 22 MB/s so not so bad. However when my internet speeds up to 60 Mb/s (cable connection via router gives exactly 60), WiFi connection instead speed up as well, just drop to max 17 Mb/s. I have tied several different settings on the router including changes in WiFi band, channel width, different channels (now channel is setup to 1 which is maybe not totally free but no so occupied) and others but unfortunately without significant improvement (in many cases connection just slowed down more).
And some details:
Wireless configuration (now)
Band: 2.4GHz
Mode: Wireless-N only
Channel Width: Auto (20MHz or 40 MHz)
Channel: 1
Wireless adaptor: Intel Centrino Advanced-N 6230 (I know that this doesn’t mean anything but Win7 shows that connection is established with speed 144MB/s)Router firmware and WiFi card updated to the newest version.
I've got a refurbished lenovo Y470 notebook, just out of the box. I was planning on spending the day configuring it, removing bloatware, ect. but I can't acces the internet. I'm at work, there is a guest wireless network for us, I can connect with my phone so the network is up. I was able to connect normally to my home network last night, not sure why I can't connect here. Running win 7 home premium.
View 13 Replies View RelatedMy wifi that is connected but no internet but works fine for my iphone and other housemates in my house. Im able to connect using a housemate internet through wifi.[URL]
View 1 Replies View RelatedBought my new Sony Vaio today that of course came with Windows 8. I have completed the setup and installed Norton 360 and Office and tried (unsuccessfully) to uninstall McAfee. Now when i boot up the computer the WI-FI connects (with a full, four bar connection) however, when i try and open IE or the store, I get a connection issue saying there is no internet access
View 1 Replies View RelatedI had bought three modems but when i connect them through wifi they are connected but shows no internet acess.so i am using bsnl brdbnd through wire.but iwant to connect through netgear DGN1000. WIFI
View 1 Replies View RelatedI have an HP Mini running windows xp. When its connected to wifi everywhere else it works but this new place it will not allow my internet to bring up anything.
View 1 Replies View RelatedBought my new Sony Vaio today that of course came with Windows 8. I have completed the setup and installed Norton 360 and Office and tried (unsuccessfully) to uninstall McAfee. Now when i boot up the computer the WI-FI connects (with a full, four bar connection) however, when i try and open IE or the store, I get a connection issue saying there is no internet access. I am using the same Wi-fi network to post this on this forum, so it seems the issue must be on the Vaio side?
View 1 Replies View RelatedMy laptop connected to internet with wifi, but it cannot use even my laptop detect connected, when i run trobleshooter it's show 'no valid IP address' even i already set up to automatically detect , restart my wifi router and unplug doesn't make any changes
View 14 Replies View Relatedwifi is connected but no internet access......when i start the troubleshooter it says that the DNA or primary system not responding
View 1 Replies View RelatedWi-Fi is connected but no internet access in windows 7
View 1 Replies View RelatedI have a couple of computers in my house that work fine with my wireless router, but all of a sudden, my roommate's computer, a Dell Inspiron with Windows 7, is connection to the wireless network but has "no internet access." I've rebooted th.e modem and router, to no avail. I've also tried a number of suggestions online, but without success. My friend's computer has McAfee, with which I'm unfamiliar. The only real difference I cn see between our computers is that she has a different wireless card.
View 9 Replies View Relatedconnect my PC/tablet with wifi router, I have bought wifi router which works with USB modem, when i connect my USB Modem i can see all the lights up (singnal- wifi, 2g/3g) and also showing in my laptop that is connect to wifi but unable to open the internet.
View 1 Replies View Relatedi just recently moved my computer to a new house the wifi adapter is picking up the correct wifi and connecting to it but not accessing the internet there is also no network access. i completed an ipconfig/all the details are below.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersKate>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kate-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code].....
I just bought a laptop installed with Windows 8. I want to connect my iPhone to the Internet through the laptop. I have tried using Connectify to set up a WiFi hotspot. It works only with WEP and my iPhone can connect to the Internet but my iPhone disconnects from the hotspot after a while and I need to restart my Connectify hotspot, which is really annoying.I googled online and find that I can use the netsh command to set up the hotspot. I run command prompt in administrator mode and type in the following:
netsh wlan set hostednetwork mode=allow ssid=adhocnetwork key=password
netsh wlan start hostednetwork
And then I share the wired network through control panel > network connections > ethernet > properties.I connect my iPhone to the hosted network and typed in the password. I see a tick next to the SSID, meaning it can connect to the hosted network.I also check the status of the hosted network. Both IPv4 and IPv6 connectivity show Internet.But when I open Safari on my iPhone, it says no Internet.
I have an Asus U31JG with WIndows 7 64-bit. This laptop is a month old to me and the wireless has been acting up since the day I got it, will explain below. I believe my home network is the problem. I have a Linksys WRT54G with WPA Personal encryption. Multiple times a day my internet quits working even though Windows says it has full connection to my router. To fix this, I open command prompt and use "ipconfig /release" and "ipconfig /renew". This fixes the problem for me, it may be a minute or a few hours. The problem is very intermittent and only happens at my home which is why I believe it is my network. However, I changed the wireless channel to 1, the only one around on that channel and tried different security settings. My WiFi works flawlessly if I take my laptop to my friends house where he has a Netgear router. I have also tried a brand new Cisco Router as well as a Netgear router at my house.
I've re installed the driver twice, and the same problem persists in Linux only I just have to disable/enable wireless.
Note: When the internet quits working on my laptop it works on other devices so it is not the internet connection causing this. And my internet is very slow when it is working on my laptop via wireless.
I have a Gateway NV59 that I had not used for some time. Recently I started to use it, and I cannot connect to any web pages. I am connected to my wireless network. I have tried all the diagnostic tests I can find on my laptop, and they do not identify the problem. I am running Windows 7 Home Premium. I have Explorer, Safari, and Firefox browsers and non of them will work.
View 7 Replies View RelatedI just bought a new router and i'm not able to access the internet on one of my laptops even though on the laptop it shows that its connected with full bars, it doesnt have this problem with the other routers i use. Also all my other computers are able to access the internet on this new router.
View 1 Replies View RelatedI was connected to a wifi-spot for two weeks and it worked all fine. Since a few days ago the owner of the spot changed the password and since then I can't connect to my internet anymore. I'm 100% sure that I have the right password but still when I try to connect it shows a yellow triangle with a black "!" on top of it, saying "Limited or no internet connectivity"[CODE]
View 1 Replies View RelatedOn my phone I connected to the wireless network but the internet won't work apparently you have to do something with a proxy and type in a router code.
View 2 Replies View RelatedI work at a Public Safety building in Pennsylvania and our employees here share a Wifi connection with a local hospital facility that is in a industrial park behind us. The room we work in is able to access the Public Wifi but only half of the room has a good connection. I went to the local computer store and purchased a Belkin Dual-band wireless Range Extender and got it all set up, now I have the Public Wifi Extention access and it will connect to it but it has no internet access. Now we have no access to the administor or the network from our facility. How do i get internet access thru this range extender? If i connect from the good half of the room to the Public wifi i have a good connection with internet access but as soon as you put it thru the extender no more internet access.
View 1 Replies View RelatedOver the past few days I've been having a problem with my internet connection.
I connect to my home wifi network and will have excellent signal strength, but after about 20 minutes or so, I will lose internet access, but will stay connected to my wifi network. If I join my neighbor's wifi network I will have the same issue.I will connect to a network, and while still connected, I will suddenly lose internet access (signal strength will remain the same). Switching networks doesn't correct the problem.
When I lose internet, I can disconnect from the network and reconnect mere seconds later and will have the internet access back again.I have reset the modem/router and my computer numerous times but the problem does not go away.
I am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.
View 1 Replies View RelatedOn the D-Link it was easy, I can see who is connected to which radio.But I can't figure out how to see who is connected to WiFi on hte E4200?I run several access points in my house, and I need to make sure htey are all working.If I can't see who, if any, is connected, I have no idea if WiFi on the E4200 is working.
View 2 Replies View RelatedThe wireless router, which is a linksys E1200 is completely new. I setup the entire wireless and there was no problems on that front.The problem is the wireless connection. Even when I am within a few inches of the router, I couldn't even load a youtube video properly. It buffers every 2 seconds. But when I plug the cable into my computer, it works completely fine. The signal strength is excellent all the time.
I tried using inSSIDer to look for the number of connections within my area for the one with the least inteference and found that I'm already on the good one, or actually, all of them looked more or less the same. But I tried changing anyways from 1 to 6 to 11, and none of them made a difference.I then tried changing my Wireless Security to WPA2 Personal. Then I tried changing the Wireless Network Mode to Wireless-G Only instead of Mixed and the wireless speed increased.
Region : Others
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :
I have 2 TP-Link # 941NDs at my home. ( version 3.6 )In the new ( second ) TP link, i activate WDS - Wireless Bridge. And configure it to through Wi-Fi connect with earlier TP-Link, and also to act as router to cater to PCs within its range. IPs are set as per of same family as that of primary TP-Link, and further, DHCP been de-activated as well. Have sent WEP security as well.It performs correctly for the time, its stays ON, but when its switched Off, and then On again, it is not able to connect to the primary TP-Link and thus not able to serve its client PCs.
I bought a Sonos multiroom-system, and connected the first player to my E2000 router through Ethernet. It then gets a dynamic address through DHCP, I can see the Sonos within the network when looking in the admin tool of the router.When I start the Sonos controller software on my PC (XP), the software can not find the Sonos when my PC is connected through Wifi.As soon as I connect PC to the router with ethernet cable the Sonos is found immediately and can be initialised. After that, I can disconnect the cable and control the Sonos wirelessly. (as long as I don't close down the controller software for too long)
From what I understood from the sonos.com website, the Sonos sends an UPnP multicast signal on port for SSDP on port 1900 for initial connection. Further communications port are described below.Somehow, this multicast package seems not to be transferred into the wireless LAN, only into the wired LAN. Do I have to open some ports, filter some ports?Forward them?
I installed this Linksys E1500 yesterday and have had a problem keeping my iPhone 4 and an iPod Touch connected to WiFi.The devices go to sleep. When I swipe the screen and "bring them back" the WiFi is Not Connected. I have to go in and re-enter my network password again. As long as the devices don't go to sleep, they maintain connectivity. Once connected they function properly.
The iPad 2 & Samsung Galaxy S phone we have seem to be keeping their WiFi connectivity, as well as a G62 HP laptop running Windows 7, an older XP machine using a Cisco AE1000 wireless network adaptor and the Xbox 360. The issue is just with the iPhone 4(ios 5) and the iPod Touch(ios 4).
I had issues with the iPad and the Galaxy phone until i disabled WMM Support in App & Gaming.I would bring this back to the retailer but I had it sitting on my desk for about 30 days and it's past their return policy.The firmware is up to date on the Router. I've tried power cycling all the devices including the cable modem & the new router.
wireless internet connection connected no bit it says no internet access what is the problem
View 1 Replies View RelatedI am trying to connect my laptop to a wireless router at my home, however, it shows limited access and when i browse the internet, i can't surf through the net. I have typed in my SSID and key correctly.
View 2 Replies View Relatedwireless connected but no internet access on pc.. Netbook using same router worksUsing Micronet adapter for wifi access on pc and built-in wifi on netbook. Have looked at a lot of comments with similar problem.
View 1 Replies View Related