Access Pc On Different Switch?
Feb 4, 2012Why i cant access pc on different switch, do they need the same set of IP.
View 4 Replies
ADVERTISEMENT
Cisco :: Access Deny In L3 Switch?
Jun 8, 2012i have Cisco L3 switch configured with diff vlan and assign diff subnet for all vlan . if i connect pc to vlan 2 i am able to ping host related to other vlan
View 5 Replies View RelatedCisco :: Telnet Access To A Switch?
Feb 10, 2011I have the following configuration to enable me telnet to a cisco switch, but couldn't even ping the 192.168.1.22.
vlan 22
!
conf t
int f4/4
switchport mode access
switchport access vlan 22
[code].....
Connect An Access Point With A Switch?
Mar 2, 2011Am trying to connect 3 pcs connected to a Dlink 8 port switch through a Dlink WL2100 Access point connected as an AP Client to the main network. Only 1 pc is able to see the main network and am having none of the other 2pcs are able to see the main network. The 3 pcs are able to see each other.
View 1 Replies View RelatedDisabling Internet Access On Certain Switch Ports But Not Others?
Oct 12, 2011I have a central cisco SG200 26P switch, with about 20 ports going off to other network switches, and individual computers around the building.I need to keep the LAN functionality of the network, but I need the majority of the computers to not have internet access. But I also need to be able quickly re-enable internet access for a particular computer connected to a particular port if required.
View 3 Replies View RelatedWireless Router Access Point And Switch
Sep 10, 2012I am having a problem setting up an Access Point. Here is my configuration. I have a Comcast Cable Modem that plugs in to a 24 port Netgear Switch. From the switch it plugs into a Linksys N wireless router with an IP of 10.1.10.76. I don't know the linksys model. But it is fairly new. I also have a Netgear WN604 N Access Point that plugs in to the same switch in another location away from the wireless router about 75+ft.
I configured the access point's IP to be 10.1.10.130 with DHCP off and DNS as 10.1.10.1. The cable modems default Gateway is 10.1.10.1 and it handles the dhcp which is provided to the switch were both the wireless router and access point get there IP's. I can't set it up so that the cable modem plugs in to the wireless router first then the switch because of a security system that is setup to the Comcast Cable Modem.
My Goal is to the the same identical SSID and Password for both the Linksys and Access point. I don't think I can set it up as a repeater because it's to far away from the linksys router.
Routers / Switches :: Can't Access Surveillance Dvr Behind A Switch?
Jul 11, 2011I have a qsee dvr that is hooked up to a switch that is connected to a wirless router/modemI have forwarded the correct ports that I need to according to qsee, ports 80, 9000 and 100I can access the dvr from any computer on the network via its local ip address, but when I try to access it via a computer off of the network via the real world ip address of the network, I cannot access it. I can ping the real world ip address of the network and it is successful.
View 3 Replies View RelatedConnect Wireless Access Point To Switch
Jun 22, 2011How can i configure my wireless AP to provide wireless internet to my network via my switch?
View 2 Replies View RelatedAdding A Wireless Access Point After A Switch?
Jan 7, 2012I am staying with some family for the next two months and they don't have wireless internet at their house. When they bought their house it was wired for ethernet and have the modem going to a netgear 8 port switch which is going to the different rooms of the house. I would like to add a wireless access point to one of those 8 ports coming from the switch. I currently have a TP-LINK TLWR740N router that I can configure into an access point, or I can buy just and access point. Unfortunately it is not an option for me to plug the modem into the router and then the router into the switch.
View 1 Replies View RelatedWifi Network Access Point With Switch?
Dec 28, 2011I think I know what I want, but I just wanted to check before I splashed the cash and made the wrong choiceI have a Humax Freesat recorder and a Panasonic Blu-Ray player. Both of which have services that need internet access, but neither are WIFI enabled & are the wrong side of the room to be connected via cabled ethernet.I believe that what I need is to wireless access point? I'd like one with a built in switch as well, as most seem to only come with only one port. The one I found has four, which would be useful as I could replace the poor wireless Xbox 360 dongle.
View 4 Replies View RelatedD-Link DIR-655 :: Can't Access Webpages After Hooking Up Switch
May 2, 2013Previous setup without problems B1 Firmware 2.00
Cable modem>Router>4 computers + 1 wireless printer.. But i needed more ports so i bought a trendnet gigabit switch with 8 ports.
Then I Plugged port 4 on router to >switch port 1
When all the computers are turned on and using everything at once i cant access websites but my skype works so i figure its probably a dns issue and my dlink is overloaded? I didnt try to access any sites with the ip only fail on my part.
Once this happened i immediately unplugged everything and restarted the router. I only have my own computer hooked up the router and did a firmware upgrade to 2.10na and my internet works immediately after but when i hook up another comptuer to the network i cant access any pages but my skype works..
Cisco :: 2960S Catalyst Access Switch From VPN
Dec 10, 2012I have a 2960S Catalyst switch in my LAN, with the firewall and the servers in the same VLAN (vlan 3).All the servers and the firewall are in the vlan 3 are in the "192.168.19.0/24" subnet, the firewall has the IP "192.168.19.1".I can land on the firewall with a VPN (192.168.130.0/24) which has a complete view on the subnet 19/24.I can access, manage and get SNMP information of the Catalyst from the servers but I can't do the same from the VPN.Is there some feature I need to enable on the switch in order to allow 192.168.130.0/24 to access it?
View 4 Replies View RelatedCisco WAN :: Remote Access SSH To 2960 Switch?
May 26, 2011I have a question you do do remote access ssh and telnet remotly to a 2960 switch?
View 6 Replies View RelatedUsing Netgear WGR614 Router As Switch? (Wi-Fi Access)
Jan 9, 2012I have a router TP-Link (without wireless) connected in my modem wich have this subnet : 192.168.0.*, that work fine. But I need a wireless connection too, my wireless router had this ip given by the TP-Link router: 192.168.0.13.
I have a NETGEAR WIRELESS-G ROUTER WGR614 which gain 192.168.0.13 but I need that gives ip's in the same subnet that TP link router. If the person connect to my wi-fi it should receive an ip like 192.168.0.*, I already try to disable the DHCP server in the NETGEAR but it's not working too. How can I do that ?
Cisco WAN :: 3845 - Do Not Have Access To Foundry Switch?
Mar 30, 2011I have the following topology::
[code]...
I can ping to both devices using Virtual ip address.The work around to solve the lines "Active router is unknown and Standby router is unknown " is to delete the hsrp configuration in Standby device, after that the problem is solved but is happens again after some days.The problem is that i don't have access to Foundry switch but i think that HSRP configuration don't have any problem, even in Log Buffer i didn't saw any problem related with HSRP.
Set Linksys SRW2016 Switch To DHCP Now Can't Access It
Jun 14, 2011I was messing with the settings, it saved now I can't access it because I can't find the ip...
Current Setup:
When I remove the router and connect directly to the switch, I lose connectivity all together.
What can I do? I don't own a console wire.
Routers / Switches :: Use TEW-639 As A Wireless Access Point And Switch
Jul 6, 2012Here is my set up:
192.168.1.1 is a Linksys WRT610N acting as a router and DHCP server for addresses .100 to .150
192.168.1.2 is TEW-639 with DHCP turned off and connected to the Lynksys via one of the LAN ports.
I then have a FosCam camera with IP 192.168.1.010, connected either wirelessly or via a wire on a LAN port to the TEW-639W.
Here is my problem: If the FosCam is connected wirelessly to the TEW-639W I am unable to see it from any device connected to the Linksys. If I connect the FosCam via a wire to a LAN port on the TEW-639W then I can see it from a device connected to the Linksys device.If a device is connected to the network via the TEW-639, I can see the FosCam whether it is hardwired or wirelessly connected to the TEW-639. What am I doing wrong?Why can I not see the wireless connections on the TEW-639 from a Linksys connected device?,The setup is that the internet comes in and is connected to the Linksys, which then via LAN cable and LAN ports on both devices is connected to the TEW-639, which is then connected to the camera.
Cisco :: VLAN Tagging At Access Port In Switch?
Sep 28, 2012I'm Confused from the fact that Vlan tagging is done at access port and trunk port always gets tagged packets (untill its case of native vlan).But I still believe in other fact which says tagging happen only when a frame hit the trunk port which means trunk port gets untagged frame and tagging is not possible at access port.
Would like to know where actually this tagging happens ?
and also which command we can use to encapsulate 802.1q protocol to access port ? The way we do at trunk port is #switchport trunk encapsulation dot1q Is the above command applicable for access mode also?
Connecting Access Switches Directly To Core Switch?
Apr 30, 2011Is this a good idea to connect access layer directly to core layer with fiber and omit the distribution layer?
View 2 Replies View RelatedNetgear N600 / Will Computers From Switch Have Access To Internet
Dec 12, 2012I have a Netgear N600 connected to a modem. I want to connect a switch to the Netgear N600, my question is, will multiple computers connected to the SWITCH have access to the internet?
Router : Netgear N600 [URL]
Switch: Rosewill RC-405X 10/100Mbps Switch [URL]
Netgear Router Setup - Access Point / Switch?
Dec 9, 2011I need to setup my Netgear as a switch/access point. I need the following set-up. My ipconfig /all reports:
View 27 Replies View RelatedD-Link DIR-615 :: Computers Connected To LAN Through Switch Could Not Access Internet
May 8, 2011My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.
View 7 Replies View RelatedLinksys Access Point :: Wap200e Disabled STP On Switch And On AP
Jun 21, 2012I'm using 4 wap200 cisco AP, 1 wap200e linksys AP and 1 cisco sf300-24p switch. Every AP has 2 SSIDs,one is for clients and one for mobile devices.I have updated the equipment to the latest firmware but I still encounter the same issue. The mobile devices go through APs and once every 2 days, my wap200e blocks its lan interface. I suspected a stp issue, because the switch was seeing MAC addresses coming from different ports.So I disabled STP on the switch and on the AP. The annoying thing thing is that none of my other antennas get cut off.I tried replacing it with a cisco wap200e,same issue.
View 1 Replies View RelatedCisco Switching/Routing :: Cannot Access Web Interface On SG 200 08 Switch
Dec 28, 2010I'm a networking newbie, but I bought the SG 200-08 switch to do Link Aggregation with and I can't access the web interface. I'm on a mac running 10.7.3, and I've tried Firefox and Safari. I've also tried on a friends PC with Internet Explorer 8.On the mac, I can go into the terminal and can see that the switch has the correct IP address and is seen on both ethernet ports.
View 2 Replies View RelatedCisco Switching/Routing :: Can't Access Web-interface On SG 200-08 Switch
Dec 3, 2012I'm a networking newbie, but I bought the SG 200-08 switch to do Link Aggregation with and I can't access the web interface. I'm on a mac running 10.7.3, and I've tried Firefox and Safari. I've also tried on a friends PC with Internet Explorer 8.
On the mac, I can go into the terminal and can see that the switch has the correct IP address and is seen on both ethernet ports:
? (192.168.1.254) at 2c:36:f8:4f:fc:8 on en0 ifscope [ethernet]
? (192.168.1.254) at 2c:36:f8:4f:fc:8 on en1 ifscope [ethernet]
either accessing the web interface or with setting up the Link Aggregation on the switch some other way.
Cisco WAN :: No IOS - Cannot Access Multilayer Switch (catalyst 3750)
Sep 10, 2011Working on my CCNA w/ live equip, I accidentley deleted the hardware IOS- yes, beginners mistake. Upon bootup, I do not get a command prompt. I tried the recovery procedure(hold mode button before power up) recommended by Cisco to no avail. My issue is I use SecureCRT & the charaters/font is ineligible. Here is an example of what I see when typing; "þæb Bûÿÿûýÿ¿¿ÿÿ". Currently, the SYST indicator is blinking & I have no access.
View 3 Replies View RelatedCisco WAN :: 2811 Access Point And Switch Is Not Connecting
Aug 22, 2011I have a Cisco 2811 router with C288nm-advsecuruityk9-mz.151-4-4.M.bin IOS version.The router has two LAN interface FE 0/0 and FE 0/1.The router have too, two interfaces ADSL ATM0.0.0 and ATM 0.0.1, both are connect to internet..I need the next configuration.The interface FE 0/0 is directly connect to a Switch A.The interface FE 0/1 is directly connect to a Access Point Cisco.The Access Point and the Switch is not connecting between.The subnet of Switch A and AP are different (Switch A 192.168.180.0/24 and AP 192.168.181.0/24)The devices in the switch A have dynamic IP address, the router must be a DHCP pool to assign theses IP.The device in the AP have dynamic IP address, the router must be a DHCP pool to assign theses IP.I created two DHCP pools in the router, one for the subnet 192.168.180.0 and other for 192.168.181.0, but the devices of FE 0/0 assign IP of 192.168.180.0 or 192.168.181. 0, but not only in the 192.168.180.0.
View 5 Replies View RelatedCisco Switches :: Console Access To ESW540 Switch
Apr 9, 2013I can access the web console, and also have telnet access but only to a VT100 menu system - How do I access the full console command prompt (without using the serial console connection)?
View 4 Replies View RelatedCisco Switches :: SRW 224g4 - Switch Access Through Console
Jan 4, 2013I can not access the switch through the console. The web interface is working properly.
Model: SRW224g4
Below some pictures. The Hyper Terminal settings. Error:
Cisco Switching/Routing :: QOS For 3560 Access Switch
Nov 28, 2011we have a class based qos scheme (see attached file) on our 4500 series access switches and we have a access 3560-48 switch runing IOS Version 12.2(44)SE3 my question is can I use the same QOS scheme for the 3560 switch?
View 3 Replies View RelatedCisco Firewall :: 2950 Switch Access-list On Dmz
Mar 4, 2012On firewall we have zone created for dmz and ip is 192.x.x.x and it is connected to 2950 switch(DMZ switch) with vlan 25..We have L3 switch on this we have created vlan 25 and connected cable from L3 with 2950 switch with vlan 25
As we have the servers on L3 and wanted to bring on dmz zone we have connected a cable.Now the problem is when i connect a pc on 2950 switch (directly on dmz switch) with access-list below we are not geeting any hist on it.
Cisco :: Access Separate Comcast Modem Administration Through Switch
Jun 28, 2012We have a rack with a Cisco Catalyst 3750 that is networked with other racks in the data center and uses bandwidth from the data center co-location (which is also an ISP). We had a need to install a Comcast Business Class modem in this rack and want to be able to manage this modem remotely. What I have done so far is.
View 2 Replies View RelatedRouters / Switches :: Can't Share Internet Access From Cisco Switch
Apr 15, 2011I went out and bought a linksys 5 port workgroup switch. I tried to hook my internet into it and my other computers into it , THINKING, I would be able to get internet on all. No go. I can get inter net on one, as you can tell. but all others nothing. and to make matters worse i got win 2000, win xp pro, and linux that I like to get online.. I have : renewed IP's assin Ip's refresh, purge dns. rebooted. all and rebooted in diferent orders. double checked connections, tested all lines. The network is on a rj45 ethernet .
View 1 Replies View Related
