Whenever my client browsing the net like youtube , facebook .y other client and the server encounter lagging .I Have : Router Dlink Dir600(4 Lan Port)Splitter Dlink Des 1016D (24 port x2)Pldt MyDsl ModemMy connection to server and client via internet .Modem - Router Dlink Dir600 RouterDlink Dir600 ( Port Lan 1) - Server Cpu .Router Dlink Dir600( Port Lan 4) - Dlink Des 1016D (24port)My Friend told me that it's better if i have Switch Over a hub connection Instead of Router And Splitter
I have a problem with a client/server app: It is a web application that resides in C:inetpubwwwroot (aspx pages) of the server. The client is a Windows app that is installed into Program Files on the clients and when running receives commands from a webservice on the server. When I install it on a PC on our own test environment it communicates with the server perfectly, no matter how many times I re-boot the client, the connection never goes down. When I give the client to someone on a separate domain, they install it and everything is OK. However, once they reboot the PC (Windows XP) the connection to the server fails. The can still ping the server from the PC, they can even see the web service is up and running by typing into a browser but the connection now fails. If I get them to uninstall the client all and re-install, it is fine again. As I say, it is a reboot that breaks it (communication to the web service that is.) My problem is that I am completley blind to the setup on the client-side of those I give it to (I only email it to them, I have only been in the site once). The PC is obviously on a domain (with static ip addresses I assume) but other than that i know nothing. I think it is something similar to the way when you map a drive in Windows and then when you reboot it has lost the connection and you have to re-map it.
I use vmware workstation, and doing small networking project.i use 1 windows server 2008 x64 sp1 as DC, DNS and DHCP with 2 nic(1 nic for local(vmnet2) and 1 for internet(NAT)) and i use 1 windows 7 client machine.in server local nic settings are ip 200.200.200.1 sm 255.255.255.0 gw: empty dns 200.200.200.1
and internet nic settings all set automatic.and in DNS i added forwarder as my company's actual DNS server name.My requirement is client should browse internet by resolving through my dns server.but the problem is my server is having internet but my client windows 7 does not have internet
I have a work computer...Dell Latitude 6400, AT&T Global Network Client (Company VPN service), using Novatel USB551L from Verizon, with their new 4G LTE. First connect to Verizon, then it automatically launchs ATT Global Network Client, once connected, the system automatically maps drives. I stay on for about 15 minutes average to 40 minutes that's when the Verizon drops/disconnects. This consistantly happens throughout the day!
1. If I connect to a "local" wireless signal NO dropping.
2. If I tether my Sprint Android, NO dropping.
Only dropping with the Verizon. I MUST have the Verizon dedicated to this work computer to run the VPN and hopefully (very soon) a mandated VOIP with Avaya!Called Verizon- they sent me a new USB thinking that might fix it. But same thing. They are showing signal strength 4G. Nothing on their side.
A lot of times our users will have a bad connection from where they are connecting in from. Their Internet connection will drop and the VPN Client disconnects but on our Cisco ASA5520, the connection will still be connected and when their Internet connections comes back, they are not able to connect as the session is still up on the 5520. Is there a way to make the connection clear quicker? I have IKE Keepalives on the RA Profile (Confidence 300 seconds, Retry Interval 2 seconds) but it seems to keep the session longer than that. Is there anything I can do to make the connection clear quicker?
Fix the issue in my connection..It says cannot communicate to primary DNS Sever 192.168.1.1 the router for my internet is beside me im connected locally but no internet connection.
My problem is I can not connect to any ftp server or any database server using my home internet connection. But i can connect to the same servers using my work internet or even using my 3G mobile connection.I tried to contact with my service providers with no luck.I am using a Zyxel wireless router. Is there any settings in my router which stops me to connect those servers.
I have 2 internet connection with the same ISP, SmartBro 2mbps.We have 7 computer unit plus 1 unit that will serve as the server.Is it possible that we combine the two internet connection into just one LAN so that all PC's will see each other. Mainly for network gamesBTW, we don't have any routers or switch yet.
I insert data from two clients.(1 window server 2003,2 XP clients ) the two client print paper and the printer is shared printer. At the same time two clients print paper and the printer stop working. So I restart my two clients and server. After restart the clients cannot ping to server.
I am trying to connect some thin clients to a domain based windows 2003 server. This the first time mi trying to do this. If the computer is set to workgroup there is no problem. The problem comes up when its a domain based server.I keep getting the message that the user is logged in. The host computer connecting to the server has the user name "thinclient" and I use the name "user" to log in from the thin client. But it says "thinclient" already in use and disconnect my connection between the host and the server.
I am installing Window Server 2008 with file Services, and I am making my clients to save files to their documents folder but those files are being saved straight in the Server. I was wondering if It is better to save files direct to the server or save files in each client?
A Windows Server 2008 r2 with 2 internet ports. One (IP: 10.0.96.132) connected to company intranet and one (192.168.10.1) as DHCP server connect to several PCs (192.168.10.**) through a switch.The problem is the PCs (192.168.10.**) can ping the DHCP server (192.168.10.1) , while DHCP server (192.168.10.1) can not ping (192.168.10.**).How to configure the server so that all these PCs can access the intranet?
I'm having trouble connecting my client/server in my virtual PC. they just aren't seeing each other when it comes to connecting them to continue my server class.
server 2003 windows xp running on virtual PC I'm running windows 7 on my computer
I want make a workgoup network with my friend by VPN.we are connected throw internet to make the VPN connection.I configed a VPN server with incoming connection. client connected to server succesfully.but sever and client havent any data send or recieve. the server dont set an ip for client.this is connection propertice: as you see there is no data sending or dara recieving..Im using ADSL Modem(tp-link 8811) and have two lan networks with Modem and another computer.
I am using a win server 2008 in my company, recently my staff have being using internet a lot for downloading and many other unnecessary software therby redusing overall bandwidth.Is there any software solution i can use for controlling bandwidth of my client computer from server2008 computer.
Can I have two asa firewall between dhcp client and dhcp server. if yes what solution i have to have to get dhcp leases. should i have to configure dhcp relay on both the asa.
I've replaced my old wireless router with a new DIV-655. Now, I can connect to my work's VPN and connect to servers and data via the VPN, but my Outlook client will NOT connect to the Exchange server.It (Outlook) just sits there saying "Trying to connect to Microsoft Exchange.Will it work.
I'd like to configure a VPN with two SR520. the first router is a SR520-FE-K9 and it's at office, the second router is a SR520-ADSL-K9 and it's at home.
Each router have a static IP and individually works well. I tried to configure, by CCA, the office router as a server and the home router as a client: at home I can't see the office network and I can't navigate.
Need step by step, using CCA to configure a secure VPN.
pxe server ip address is 10.10.10.20 which is connected to switch port fa0/9 and client is connected to switchport fa0/7.i have only 3 devices altogether. below is running config of switch. wen i boot the client from the server, it display error message as: "proxy dhcp were offered. none dhcp were received. exiting broadcom pxe."
Web server is behind Cisco RV180 VPN Router. Port 80 is forwarded to web server. all the rest is default. when web application requests user's host address, then it appears as coming from our router's local address (10.0.0.1). what needs to be configured so that RV180 would pass on client's original IP?
I have created Remote VPN on ASA5510 (8.0(5)) the Tunnel is UP and client machiches are able to connect to the VPN but not passing traffics between Server & Client.
