i bought a computer the old one works fine but it is slow. am using ethernet dsl cable. it connects through lan connections. the new one connects local only and will not let me get on internetwhen i try to go on the internet it brings up a connection through broadband and askes for a user name and password. the other computer doesn't and i have no username or password through the dsl.
View 2 RepliesI have a computer hooked up to the internet with a cable modem via usb cable. The ethernet part of the modem is hooked up to my xbox 360.
I don't have a wireless router or a wireless internet connection but I do have a Belkin USB Wireless Adapter and I read on the web that you can turn your computer into a wireless hotspot if your computer has a wireless card with antennae or a usb wireless adapter.
Example, I have a Nintendo USB Wireless Adapter. All I do is stick it into my computer's USB port and it becomes a hotspot that I use to connect to my Nintendo DS to the internet wirelessly. So I basically thought that my Belkin adapter would be able to do the same thing only with whatever other devices I try, not my DS.
I just a new motherboard yesterday an ASUS P7P55D. Running windows 7 and using ethernet, the internet would cut out after a few minutes and come back again by itself and cut off again. After turning on xbox live i realised that my computer is causing problems for the router and cutting off the connections.
View 1 Replies View RelatedI'm trying to connect our ASUS VIJ series laptop to a dlink DIR-615 wireless router. The router connection page asks us to: "Please enter the PIN from your wireless device and click the below "Connect" button". How to find the PIN number for the laptop? The laptop uses a wireless g connection. The laptop can find the dlink router's signal on the wireless profiles & has been connected wirelessly in the past to a router (a plug & play type) without a problem.
View 7 Replies View Relatedmaking a wireless connection from my broadband router model td 8816?
View 1 Replies View Relatedi want to make my minecraft and gmod servers permanent so i got stupid and built a low powered server out of an old athlon media pc i had laying around. anyways my current setup i have going is my main router is in the basement and i have a dd-wrt d-link repeater in my room. ok so i gave the repeater a static ip of 192.168.1.56, and gave my server a static ip of 192.168.69.25 (i made the ip of the repeater 192.168.69.1) i forwarded all the necessary ports to the static ip of the repeater then to the static ip of the server. but my servers wont work. on minecraft it says "end of stream" but if i look at the active server log on the server it says "myipaddress has lost connection" and on gmod i just cant connect or see my server at all.
View 4 Replies View RelatedMaking Configuration between 2 Apps?
View 1 Replies View RelatedYou have to make 4 subnets for 4 VLANs, the router interface assigned to each VLAN is the LAST usable host on the subnet.so unless I'm really bad at networking the graph should be:
NET ID // HOSTS // BROADCAST ADDRESS // VLAN
192.168.0.0 // 192.168.0.1 - 192.168.0.62 // 192.168.0.63 // VLAN1
192.168.0.64 // 192.168.0.65 - 192.168.0.126 // 192.168.0.127 // VLAN2
192.168.0.128 // 192.168.0.129 - 192.168.0.190 // 192.168.0.191 // VLAN3
192.168.0.192 // 192.168.0.193 - 192.168.0.254 // 192.168.0.255 // VLAN4
So if I'd have to write down a single host configuration for VLAN2..I think it should be:
IP: 192.168.0.65
subnet mask: 255.255.255.192
default gateway: 192.168.0.126
Is this correct? I'm not sure whether the default gateway should be 192.168.0.255 (as would with normal subnets) or as I wrote down 192.168.0.126, this is the first time i've ever gotten assignments including VLANs and I havn't really gotten a solid explanation.
i WANT Making Wireless access secure
View 1 Replies View RelatedIf you have a router connected to several computers can a person create a shared drive using a remote USB drive?
View 7 Replies View Relatedi have to make a wireless network for 48 apartments, thats in 4 floors and the area surface is 400 x 400 meters i want to go with netgear maybe buy 1 router and 2 access points?
View 1 Replies View RelatedHow do i make sure that my voip softphone is going through the vpn i have and the other party ( voip prvider is seeing the vpn ip insted of my real ip
View 2 Replies View RelatedI'm running XP and have Bell-Aliant modem SIEMENS Gigaset SE567 running to DI-624 router. It has been working for years but after the internet was down in the area for most of the day, it has failed to reset. I've done the usual un-plug/wait/replug routine a few times but cannot connect. I can connect directly through the SIEMENS but when I introduce the DI-624 back into the mix, I'm not able to connect to the internet. How do I make it happen. I'm not tech savvy so go slow.
View 1 Replies View RelatedI am wanting to make my desktop wireless I have a D LINK dual band wireless router now. My laptop is wireless and works fine my desk top is hardwired to router. Thinking of moving my moden and router to TV and making my desktop wireless and hardwireing my media server I think it called ( still yet to be bought still doing home work on which one to get and how to hook up ) Thinking less signal loss be hardwired to media server. I now have AT&T DSL 1.5 MB upgrading to 6.0 MB to stream netflicks . Do you think 6 MB will steam OK? Should I Go with just a USB adapter or go to PCI internal Adapter? In reading some of the other post seems hit or miss on adapter seeing and working with routher. Is there a brand or type of adapte I should look at? as I said Desktop will now be wireless media hardwire dose this sound like the way to go about doing this? Any media server that seems to work better than others . not doing x box or Wii not a gamer just want to stream Netflix without buffering and as good a picture as Poss.
View 1 Replies View RelatedI want to make the contents of my pc's hard drive available via my network (ie for use on the laptop), not just the media player library but the actual directories and files themselves. is this possible without a vpn? assuming so, how do I make it happen, and is there any way to secure this access further than just network access? Any easy-to-use and secure vpn.
View 1 Replies View RelatedI made a new connection with a password. And I have deleted the old connection on the "Manage wireless connections" But the old connection still appears on the Wireless connections. I don't want my neighbors to connect to the old one since it has no password, and I can't figure out how to delete it.
View 1 Replies View RelatedI installed a wireless adapter on my pc and since then when I play a game online or watch something online there will be times when the sound will be weird and noisy for a slight second along with the slowed visual. Also I noticed that it awakes the wireless printer from sleep mode. Could it the wireless adapter be interfering with the wireless printer? I tried to adjust wireless antenna but it didn't do anything.
View 2 Replies View RelatedWe're running three networks (inside, outside and dmz). Inside is 10.0.1.0/24, dmz is 10.0.2.0/24, outside is a static ip allocated by our ISP. We'd like to configure the following:All traffic from the outside to [static provider ip] on port 80 should go to 10.0.2.200 port 8080.
View 14 Replies View RelatedWe have a customer that recently changed IT Vedors and came to us. We needed to change the ISP and need to make changes in their Firewall. I went out on site and wasn't able to get into the Routers and I contacted the previos company but they wouldn't release that information. So we had to reset the devices and set everything back up. Everything works great except before they had an IPSEC VPN Tunnel between the 2 buildings. Both Buildings have WRVS4400N Routers and I have setup a VPN IPSEC Tunnel on both sides. I have named them the same and the summary says that both are up. But when I try to go from one side to the other I am unable to Ping or resolve anything. I called Cisco but they said they are out of warranty. Cisco directed me here.
View 1 Replies View RelatedI am trying to get the ACS 5.3 to work with NCS but cannot make it work correctly. url...But this does not show how the ACS referencing AD groups would work when determining which custom attributes to use.
On the ACS 5.3 i have set up the following .The ad is working and in Users and identity stores/External identity stores/Active Directory then my AD test works fine.I have set up the Users and Identity stores/Identity Groups with appropriate ip s.I have configured the Network Device Groups/Network Devices and AAA Clients with the ip address and Authenication optionsA.In Policy Elements/Authorisation and Permissions/device administration/shell profiles.I have creeated a shell profile called network shell pro which das a common tasks of def priv = 0 and max priv = 15
Now i can get into the NCS but i do not see any of the administration buttons on NCS - so this means the custom attributes are not working.i shouldnt need a user for this on the ACS as its using AD.
I want to centralize our files which my colleagues access frequntly in the office?For this purpose, I am using and old laptop dedicated for this job. Nowadays I am thinking of achizition of a server. But I dont know If I buy a new server, this will provide me with some performance and security in plus?Should I really replaceour old laptop with a new server?
View 8 Replies View RelatedAt the moment i have 3 routers across the house, each acting as a wifi access point.My problem comes to when i use my phone or laptop, it connect to a random access point doesn't matter of the signal.Is it possible to combine 3 routers as one access point. So that i would connect to one access instead of 1of 3 access points, that would be a strong wifi signal no matter when i am in the house. Something similar to what bit malls or stores have.I have looked at wi-fi repeaters, but they just repeat the wifi and make new access point.
View 2 Replies View RelatedI have a desktop without a wireless card and i want my network to be wireless so i bought a d-link wireless card for the desktop, the system then discover the wireless network but could not connect it kept on trying to authenticate, it did not even ask me for the web security key, what do I do
View 1 Replies View RelatedWithin a workgroup environment we have four large drives, statically assigned and all accessbile via VPN. Our FW is a Cisco ASA-5505. Where within the ASA-5505 GUI can one of these drives be made inaccessible via VPN ?
View 0 Replies View RelatedI have a customer with an ASA5505 where it will not reply to SNMP polls from any source, i have followed the configuration guide [URL].at and tested another ASA in our internal network and i have that working fine on our LAN, here is the snmp and logging sections of the show-run on the ASA, it there anything obvious im missing to make the SNMP work on this device?
snmp-server host outside 203.XX.75.122 community XXXX
snmp-server host outside 203.XX.84.196 community XXXX
snmp-server host outside 203.XX.86.82 community XXXX
snmp-server host outside 82.XX.244.3 community XXX
[Code] .....
The command that is given returns an error at the letter a in archive. The command I used was: archive download-sw /overwrite /reload tftp:// obviously with my tftp server info and file name at the end. I logged in with privileged EXEC mode as directed, but archive is not listed when I type ? to get a list of commands. I need to have this AP up and running by Monday.
View 3 Replies View RelatedI have an Orange Livebox connected wirelessly to my laptop. Everything's been working fine until the last few weeks. Whenever I receive or make a call using my iDECT s2i cordless telephone the internet drops and it takes ages to reconnect. I've checked all the connections and every phone socket has an ADSL filter. I understand that some wireless devices can affect a router and that these are usually 2.4ghz devices but I have no idea if my cordless telephones are 2.4ghz or 5.8ghz or indeed if this is the source of the problem at all.
View 2 Replies View RelatedI found my dir-601 router keeps making arp query to all ip addresses in same network periodically.all dhcp clients are general laptops and smart phone, I don't think there are any arp cheats attack on those devices.is it normal?
model: DIR-601
hardware version: B1
firmware version : 2.00NA
Maybe this was listed in the release notes for the product and I missed it, but can this item support Etherchannel in a 2801 router? I installed the module into the router and the router recognizes the module. I can configure the ports as access or trunk ports, but I am unable to configure the channel-protocol or the channel-group for the Etherchannel. The IOS on the router is 15.1 M with the upgraded Bootloader version 12.3.
View 1 Replies View RelatedWe are deploying a new office in the building next to our main office. The main office has a Cisco ASA 5510 behind that is a Cisco 3750 stack. In the new office we are deploying a new Cisco 3750, they will be connected via fiber cable. I have sliced off VLAN 800 as a transit link /30 with an address space of 10.249.249.1-4. The new 3750 only has two VLAN's 800 and 112 (10.112.0.0/24). VLAN 112 routes are advertised to the neighboring 3750 properly as seen in the routing tables of the 3750 stack:
D 10.112.0.0/24 [90/3072] via 10.249.249.2, 00:22:24, Vlan800
Traffic passes between all local VLANS with no issue. I found in order to get packets to pass between the ASA and the new 3750 I had to add a static route to the ASA:
S 10.112.0.0 255.255.255.0 [1/0] via 10.100.0.1, inside
My question is why is EIGRP not advertising the 10.112.0.0 network to the ASA. Here are EIGRP configs on the switches
Existing 3750 Stack
router eigrp 100
network 10.0.0.0
redistribute static
[code]....
We connected 4 wireless access points (AP541N-E-K9) to an SG300-10P switch.We want to be sure that no wireless clients can alter settings to the network by connecting to any of the networking devices. We also want that no wireless devices (except a few) can connect to computers that are on the wired network. I'm new to configuring networking devices so how to set up the switch for this.We already added all the MAC-adresses of all the wireless devices (that are allowed to use the wireless network) to the access points.
View 3 Replies View RelatedAre there any manuals on how to open the srw224g4p switch? I can't find anything the switch is making a lot of noise - sound like the fan.
View 2 Replies View RelatedOk, so what I want to do is make a router/firewall/proxy (maybe add webserver/FTP as well). Just to start off I want to say that I have moderate knowledge of Linux, enough to administer it from the CL. I have setup routers before but it was years ago and I've forgotten some of the details involved. What I do is a base LAMP install, with DNS, Samba, DHCP server, OpenSSH and then Webmin for easier administration. I've also installed EHCP (easy hosting control panel) in the past but have not at this point.
So, what I want to know is how do I setup the NIC's in the etc/network/interfaces file. Let's say that eth0 connects to the modem and eth1 & 2 are internal adapters. Currently my network is running a Linksys WRT54GL with DD-WRT and the router is set to DHCP for the WAN connection and DHCP is running on the internal network as well. The modem is at 192.168.254.254 and is giving the router an address of 192.168.254.1 my internal network is 192.168.1.1 (192.168.1.0/24). I would like to setup my internal router address to 192.168.1.1 so I guess I need to set it to static in my interfaces config and then set my eth0 to dhcp. Does this sound correct?
So if I do the above my only question is how do I setup the routing tables after that? I always get messed up when I need to make the switch from my Linksys router to my Linux box. I'm not worried about firewall rules at first I can change those once I have the router up and running. I just don't know if I need to make some kind of bridge to bridge the eth0 and eth1 (external NIC and internal NIC).