I have a NETGEAR Wireless-N 150 Router WNR1000 v2. I am trying to configure it for my LAN which has a DIALER. [code] I tried to configure my NG but it is unable to connect to the network on its own. I have to use CONNECT dialer from my PC to connect which is useless because I can't use my wi-fi enabled devices to access network.
View 1 RepliesWe are a new call center company and want to configure the network to setup the predictive dialer, work properly.how a network could be setup to configure predictive dialer.
View 2 Replies View RelatedI recently put in a Netgear firewall, configured it, its running no problem. Then I setup a new Netgear N600 wireless router, configured it, gave it a static IP, connected to it, works like a charm. Thing is, when I try to access the web gui I receive nothing.. Is the Netgear firewall taking priority or something? I went directly connected to the netgear wifi router and double checked to make sure that there was no settings restricting administration from wifi users, etc..
View 3 Replies View RelatedI have the Netgear wndr4500 router setup as an AP. The wndr4500 has a feature for guest wifi but will not connect to the internet. The main wifi will connect to the internet fine. I'm wondering if I use the WNDR4500 as an AP, the guest features do not work?
View 2 Replies View RelatedI use a Netgear FS605 Ethernet Switch to connect a wifi modem to my network and thus to the internet. People in that room can jump online via the wifi modem. You can also print to the wireless printer in that room via that wifi modem being local. However, I can no longer print to the wifi printer from anywhere else in my network (I could before I got a new router and wifi modem in there).Would this be a problem with this Switch or with the modem e.g.
View 1 Replies View RelatedI am having trouble with my modem/router the netgear dgn2200 n300. I bought it to replace my older netgear modem/router (same model v2 to v3).The problem is I just keep getting disconnected say every hour or so when I am using the internet and sometimes it can disconnect me 2-3 times in half an hour. I have removed the filter/splitter and plugged the dsl cord from the netgear straight into the wall bypassing the filter and I still get disconnected.When I am online I receive great connectivity and I consider the bandwidth to be just fine for my needs.My question is what do I have to do in the settings of the router or in my internet properties for it to stop disconnecting me as it gets frustrating. I will take any advice except for "get a new router" or "do an isolation test" blah. Simply because 1. It happened with my old router and with my netcomm modem. 2. I have already done an isolation test and somethings not configured properly I think so, I am no networking wizard.
View 14 Replies View RelatedOur ISP provided a DSL modem/router (Netopia) that I connected to the Netgear wireless router with dd-wrt flashed. All I've done so far is connected the two. I have a connection, but I want to know if it's possible or advisable to configure everything from the Netgear router. But following the instructions here[URL], it seems I have to configure DNS and such using the Netopia router. I don't have a full grasp on how to use them together the correct way - like using the Netopia as an ethernet bridge.
View 4 Replies View RelatedI am currently experiencing difficulties setting up a Netgear router (WNR834B). The router I had been using previously allowed me to access the internet, but frequently dropped the connection, especially when I connected to it via my laptop. I have the new router set up correctly (I even get a signal from it) but both the desktop computer I set it up through and my laptop cannot access the internet. When I diagnose the connection issue I get the message "The network adapter "Local Area Connection" does not have a valid IP configuration."
View 14 Replies View Relatedi've been tring to configure our netgear N600 router, it directs me to the support homepage all the time after we half through the configuration and got disconnected at first try. now i've tried clean dns, reset internet settings, nothing seems to work...
View 1 Replies View RelatedWe have a dsl connection on 897 dsl router at the customers HO.The telephone line is directly connected to router we configured dialer with username and password and it takes a static ip of 212.249.213.xxx.Now he has some branches that are connected through wireless links and he has arranged for a subnet of 8 public IP's in the range 72.70.245.xxx
Can we some how use these public ip's as secondary in the routers dialer interface and assign to the servers in the branches so that it can be accessed through web.
The laptops in my flat are wirelessly connected to a Netgear N150 Wireless router and the connection is forever going from little to nothing. I've tried resetting everything, getting Orange to replace the router (a new Netgear N150) but still nothing. I've tried changing channels in the past but never seems to last. I can't work out if another wireless router in another flat is chomping into our connection
View 14 Replies View RelatedI recently switched internet service providers from AT&T to Time Warner and ever since I have been unable to connect to my Netgear router with my computer's wifi. However, I have successfully connected my TV wirelessly to said router. One other note, my computer's wifi seems to recognize that the netgear router is there but it just refuses to connect me to the internet
View 7 Replies View RelatedI'm posting from my phone because right now its my only access.I have a Netgear Router model number WNR2000I have a Gateway GM5260 model computer using windows xp.I am currently trying to connect to my awesome neighbor's wifi connection that they so lovingly bestowed on me and my family the other day.Herein lies my problem:I cannot get their router and my own to connect. I'm a networking noob and could really use some assistance.I've got a their wireless password, my router, and my ethernet cable connecting my router to my pc.Do I need to pick up a wireless antenna to connect to my router as well?
View 1 Replies View RelatedI have two 3825's. Each has it's own ISP connection. Nat is configued for both. They have an ethernet connection between them and I'm running OSPF between the two so the routes propogate. I have qty 11 Dialer interfaces configured on each router (each router has an exact copy of the other routers dialer interface). However, I only want the Dialers up if the ISP connection on the mated router goes down. Much like HSRP I need one to preempt and be active if both ISP connections are up. When one goes down the other Dialers must come up. Each dialer sends a Dynamic DNS host name and IP address pair to DynDNS.org. So I cannot have both up otherwise the DNS names will bounce between ISP#1's IP address and ISP#2's IP address (back and forth). Let me know if any option exists to make this happen. As an aside the ISP's are providing me DHCP addresses so I cannot work off of an IP, it has to be the physical interface (i.e. Gi0/0).
View 1 Replies View RelatedI have the below configurations done on a 2900 router. [code]I would like to know, if the IP address assigned to dialer1 interface "20.1.2.133" would be listed in "show arp" ?, as it failed to list on our router and I want to know if this is an expected behavior ?
Secondly, does self ping 20.1.2.133 (dialer interface IP) work ? [code]
My net drops off every 20secs like clockwork, only affecting the wireless.I bought a new router yesterday to see if that would work, but it hasn't. At the moment, my router is connected to the modem, and my computer upstairs is running through the wireless connection from the router (not the modem)
My router is a NetGear N600 Wireless Dual Band... and my modem is a NetGear Rangemax wireless My computer is running Windows 7 and has a Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Network Adapter(im connecting to my network via the 2.4ghz... not the 5ghz)I've tried doing the whole, ipconfig/ release
need passwords for netgear 1 wifi . free
View 2 Replies View RelatedI just successfully setup my wireless Netgear router to work with my laptop and desktop. I now want to get my iPhone to connect to it as a WiFi connection. It sees the available network after I enable WiFi, but when it tries to connect, it just says "unable to connect" or something after I input the password.
My current password shows in the Netgear router (through 192.168.1.1) in the "passphrase" field under Wireless Settings, and it's cp6s-n3rb-ziav. This is what I put in the password field for my particular network in the iPhone before it tells me it can't connect.
There is an option on the left column in the router for "Set password," but it's just to change it to something else. If my iPhone won't accept the current one, I don't see why it would accept a new one, and then I'd have to go and change it in the laptop, too. Without knowing if that's the issue, I'm holding off on that for right now.
I am running an i7 MSI gt683 with windows 7 with an Intel Centrino Wirelss-N 130. My home wifi connection runs off of comcast on a netgear router, and the wireless connection works on every single device in the house except for my laptop. I can run my ps3, my wii, we have an ipad, all our phones can connect and we have another laptop that connects with no issue. I have updated my drivers for my wireless card to the latest, flushed the ip on my desktop that the modem is connect to a dozen times. The only way to sometimes fix it is to manually log in to my router and release/renew the ip address from there. Sometimes it will work, sometimes it won't. When it does work, it will work for about a week and then stop working for no reason at random times.The errors I keep getting are:Identifying network (which runs infinitely before cycling back to no internet connection)Connected with no internet access.
View 5 Replies View RelatedI have a netgear router. I just got a iPod from a friend. I am having problems trying to figure out how to get wifi on the iPod.
View 1 Replies View RelatedI have been connected and have a strong signal, but I deleted some books, and when I tried to open it. It told me I would have to reconnect to the netgear. I have tried everything I know to but it will not accept my password.
View 2 Replies View RelatedI have been using a cable modem gateway - Netgear CGD24G from Charter for two years. I just bought Netgear R6300 wifi rounter in order to upgrade the speed and range for my internet. My goal is to upgrade 802.11g to 802.11ac. Is there any special way to setup it up? Or do I need to contact Charter to replace a new gateway?
View 7 Replies View RelatedI am having netgear JNR 1010 wifi router and I use Cablenet. the wire which carries internet is directly connected to my Desktop pc's LAN port without modem.Is there any way to install this router without conecting to modem?
View 3 Replies View RelatedI have an Att combination Netgear modem-router that is painfully slow when accessing wi-fi gear remotely. Everything works great on the lan, but often times out on remote access over the internet.
View 3 Replies View RelatedI want to configure my router to use 2 ADSL lines each with a dialer and a modem in RFC2684 mode. I have a 2821 (IOS 12.4) with an HWIC-4ESW.
My network topology is like this :
ADSL Modem 1 (RFC2684) --
(Fa0/0/0)
Router -- (Gi0/1) MyLAN
(Fa0/0/1)
ADSL Modem 2 (RFC2684) --/
1. I configure my DSL Modem in RFC 2684. The first use 172.16.0.2/29 and the second 172.16.0.3/29. I connect this devices to Fa0/0/0 and Fa0/0/1.
2. I configure Vlan1 to use the network configured on my modem :
interface Vlan1
ip address 172.16.0.1 255.255.255.248
3. I try to ping my devices :
#ping 172.16.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.0.3, timeout is 2 seconds:
!!!!!
[code]....
Recently i brought D-Link DIR-524 wifi router. somehow i am able to connect to internet. But i am dont know how to block it for other computers. i am new to networking. How to configure the D-Link DIR-524 wifi router.
View 7 Replies View RelatedI have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.
View 5 Replies View Relatedhow to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies View RelatedI want to setup secure Wi-Fi on my Beetel ADSL modem/router. What are the parameters which I need to setup through the modem web interface?
View 1 Replies View Relatedi bought the netgear wgr614v10 router yesterday from yesterday i was trying to connect to wifi but i could setup
View 3 Replies View RelatedI have a router TP-Link (without wireless) connected in my modem wich have this subnet : 192.168.0.*, that work fine. But I need a wireless connection too, my wireless router had this ip given by the TP-Link router: 192.168.0.13.
I have a NETGEAR WIRELESS-G ROUTER WGR614 which gain 192.168.0.13 but I need that gives ip's in the same subnet that TP link router. If the person connect to my wi-fi it should receive an ip like 192.168.0.*, I already try to disable the DHCP server in the NETGEAR but it's not working too. How can I do that ?
Out of no where today, my wireless connection has begun saying "No internet access" and I can't go anywhere online Ever since it began happening, it's been saying that for longer amounts of time. So at first it was only a few seconds, now it's been taking a minute until I re-gain internet access. I haven't installed anything or ran any executables lately, don't have any viruses, I obtain my DNS and IP addresses automatically, and a few minutes ago I installed the newest firmware update of my router and I'm still losing internet. I have a NetGear WNDR3400 router.
View 14 Replies View RelatedHere is my setup:
Netgear WNR2000 router.
Macbook Pro with Snow Leopard connected to router through wireless.
Windows 7 Desktop getting internet through the MBP ethernet.
I can't figure out how to be a part of my "Home Network" with my Win7 Machine so I can see other computers in my house, use my networked printers, etc. I can only see the MBP it is connected to in network panel. I want to be able to stream the movies on this computer to my iPad which is connected to the wireless router.