Tl-wr1043 - No Connection While Connected To Wifi?
Jul 8, 2012
a couple of days ago we lost our connection for a few hours, but I wasn't really concerned as it happens from time to time, but on my computer it never returned. I can connect to the network but I am not able to reach my router management page nor do i have any real connection. All the other (several) devices work perfectly in the house. Also if I use my phone's USB tethering I do actually have connection (although pretty slow). I've ran Spybot S&D and Malwarebytes Anti-Malware but neither of them showed anything of relevance as far as I am concerned. It doesn't work in safe mode either.
I use a TP-Link TL-WR1043 router and a TL-WN722N as the receiver.
View 3 Replies
ADVERTISEMENT
Sep 29, 2012
I have been using a TP-Link WR1043-ND for a while now. It is configured as a dumb switch with DHCP disabled. Every other day or so, the device stops taking connections and I cannot access via the IP address. A simple power toggle resets everything immediately. Through this, the LAN connected devices never lose connectivity, I simply am not able to connect wirelessly or access the router via web browser.The only device I connect to the wifi is my phone, so it may actually be more frequently and I do not notice due to my low utilization (and I have 3G so I don't always notice right away if I'm connected). I have a WDTV Live SMP connected to one of the LAN ports and that functions non-stop regardless of the wifi. When the wifi is "down", my phone can see the network and attempts to connect. Sometimes it times out, other times I am repeatedly prompted that the password is incorrect, even though I am POSITIVE that I am entering it correctly. Once I toggle power on the router, the phone connects fine with the stored password.
I have updated to the latest firmware (about a month or so ago): Version: 3.13.12 Build 120405 Rel.33996n My hardware version is: WR1043ND v1 00000000 The router is connected (via LAN port 1) to a wall drop. My upstairs roomate maintains the gig switch and modem, as well as handling the network admin. I simply am using the router as a switch to provide extra ports and broadcast the network over wifi in my apartment.All that said: I need troubleshooting this router and it's configuration before I consider buying a more expensive replacement (and if I go this route, I might add a small switch as well to give me more than 4 LAN ports to work with). I am also considering flashing to DD-WRT before replacing as well to see if that makes a difference in reliability and uptime.
View 2 Replies
View Related
Aug 21, 2012
My internet connection setup is: PC -> Trendnet 632 BRP wi-fi router (via Ethernet cable) - > D-Link DSL-2520U modem (via Ethernet cable, PPPoE) -> Internet. I have other devices connected to my Trendnet router via Wi-Fi connection (Notebook, PS3, XBOX, iPhone).My ISP gave me two DNS servers wich I have entered in my Trendnet. But when I look at the DNS tab in my D-Link I see two different DNS servers witch is not the same I entered in Trendnet.hey was set automatically when I created new DSL connection. I've also tried to leave the DNS adress tab as it was by default (0.0.0.0) in Trendnet router and after that my network still works normal. And when I look at the WAN status tab in Trendnet settings the DNS servers is set automatically to 192.168.1.1.So I have 3 questions for you:1) Do I really need to enter those DNS servers that my ISP gave me or I can just leave it to DHCP to manage them?2) If I have entered ISP's DNS servers in Trendnet then witch DNS servers is actually I'm using the ones my ISP gave me or the ones that my D-Link have picked automatically?
View 11 Replies
View Related
May 27, 2011
I have Comcast cable internet routed through a linksys E3000 router. My desktop is connected to my router via ethernet and my various other devices including my laptop are wifi connected. It seems almost at random that my desktop will lose its connection.Windows will show me as still being connected and my network connection will show a normal status until I atttempt to repair it then it will change to limited or no connectivity. Through all of this, my other devices all still have a wifi signal (I don't use more than 1 or 2 at the same time). I can reconnect to the internet by unplugging my ethernet cable then reuplugging it back in and my connection will start working again. I've also had several blue screens, and when I checked the dmp files it revealed my network card driver as the culprit, yet I have reinstalled and even clean installed the microsoft signed driver. I have also attempted to reboot both my modem and router to no avail.
Microsoft XP
Marvell Yukon ethernet adapter on a biostar mobo
C:Documents and SettingsMain>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : sn1
Primary Dns Suffix . . . . . . . :
[code]...
View 5 Replies
View Related
Oct 11, 2012
I have experienced some strange behavior of WiFi connection using WRT320N router. ISP provides me the internet in 2 modes (day and night). During day mode max speed is 24 Mb/s and during night 60 MB/s. Modem ADSL (Cisco EPC3010) is connected to Linksys WRT320N and on router is configured WiFi.Now issue. In the day mode everything is perfect. Cable connection gives me 24 MB/s and WiFi connection around 22 MB/s so not so bad. However when my internet speeds up to 60 Mb/s (cable connection via router gives exactly 60), WiFi connection instead speed up as well, just drop to max 17 Mb/s. I have tied several different settings on the router including changes in WiFi band, channel width, different channels (now channel is setup to 1 which is maybe not totally free but no so occupied) and others but unfortunately without significant improvement (in many cases connection just slowed down more).
And some details:
Wireless configuration (now)
Band: 2.4GHz
Mode: Wireless-N only
Channel Width: Auto (20MHz or 40 MHz)
Channel: 1
Wireless adaptor: Intel Centrino Advanced-N 6230 (I know that this doesn’t mean anything but Win7 shows that connection is established with speed 144MB/s)Router firmware and WiFi card updated to the newest version.
View 9 Replies
View Related
Nov 9, 2012
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 100820
ISP : UPC
I intend to upgrade my TL-WR1043N router in respect of firmware. Your available firmwares are targeted to TL-WR1043ND types only.Are they compatible or you have different firmware for TL-WR1043N ?
View 5 Replies
View Related
Feb 22, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Charter 20Mb
I've had the router for 3+ months, and was very happy until about a week ago. Since then, it's started doing what many others here have reported: freezing where it's impossible even to access the web interface, requiring a reboot. When this happens, router's SYS and WLAN lights both freeze (either on or off, seems to be random wherever they are at the instant). The other lights continue to flicker. Freezes occur anywhere from half an hour to several hours apart.Network includes three ethernet wired devices (1 computer, 2 Ooma VOIP adapters), 1 TB NTFS hard drive via USB (music storage), 4 wi-fi devices (1 computer, 1 network streamer, 1 printer, 1 Roku streamer).Use the router extensively to stream music from the USB-connected hard drive, but the freezes also happen when not streaming.Have already done a factory reset of the router. Currently running plain vanilla installation except for enabling security settings and the USB drive, and it's still happening.
View 3 Replies
View Related
Nov 30, 2012
I am trying to connect my laptop to a wireless router at my home, however, it shows limited access and when i browse the internet, i can't surf through the net. I have typed in my SSID and key correctly.
View 2 Replies
View Related
Oct 13, 2012
I've got a refurbished lenovo Y470 notebook, just out of the box. I was planning on spending the day configuring it, removing bloatware, ect. but I can't acces the internet. I'm at work, there is a guest wireless network for us, I can connect with my phone so the network is up. I was able to connect normally to my home network last night, not sure why I can't connect here. Running win 7 home premium.
View 13 Replies
View Related
Feb 12, 2013
My laptop now is using windows 7 operating system. When i want to use wifi it connected but cannot access the webpage. I am using wifi from my android device. Before this my laptop is working normally. I can access to the webpage like usual. But since three days ago it happen. what is going on with my laptop or my android device. But my android device can access to internet normally.
View 3 Replies
View Related
Feb 29, 2012
I have many computers and work on a wireless network. We live in a very large multi-unit building in a very large city. We hadn't had any issues with connectivity for a while, but recently the PCs in the office cannot stay connected for more than a minute or two. It happens to our two desktops and one laptop; the only computer that seems immune is the lone apple laptop. The PC laptop has much less difficulty staying on when I sit in the room with the router. The office is literally the next room over, less than 20 feet. The network still shows up as an available network, it just won't connect. All the impacted computers will be fine for maybe a minute and then will all drop out at the same time. Rarely (like once in the past month) there will be no issues at all, and we can stay on all day. We have changed the channel of it a few times, but there are at least 15 other networks nearby. The router is relatively new, it is a Netgear Rangemax Duo wireless n-adapter. We have gotten to the point where we have no idea where to go next.
View 4 Replies
View Related
Nov 28, 2012
My laptop says that it is connected to the internet but that i have no internet access, everyone around me has laptops that will work fine with the same wifi source but mine wont pull up any pages at all
View 1 Replies
View Related
Jul 29, 2012
My wifi that is connected but no internet but works fine for my iphone and other housemates in my house. Im able to connect using a housemate internet through wifi.[URL]
View 1 Replies
View Related
Feb 5, 2011
phone detects wifi asks for code then gets connected.but when i open the browser and start log on it says invalid server name
View 2 Replies
View Related
Jan 10, 2013
I have a wireless router that has other computers that connect with no problems. my laptop says i'm connected to wifi but i can't pull up any web pages. i was told it might be my network settings?
View 3 Replies
View Related
Nov 16, 2012
Bought my new Sony Vaio today that of course came with Windows 8. I have completed the setup and installed Norton 360 and Office and tried (unsuccessfully) to uninstall McAfee. Now when i boot up the computer the WI-FI connects (with a full, four bar connection) however, when i try and open IE or the store, I get a connection issue saying there is no internet access
View 1 Replies
View Related
Dec 25, 2012
at my home i have a d-link router i have configure the modem to set it to be the same ip address in my old file server ip..and now my wifi can't auto connect for my phone and laptop..they has to insert a static ip address to connect the wifi...
View 14 Replies
View Related
Mar 25, 2013
I had bought three modems but when i connect them through wifi they are connected but shows no internet acess.so i am using bsnl brdbnd through wire.but iwant to connect through netgear DGN1000. WIFI
View 1 Replies
View Related
Jul 16, 2012
i connect to the internet using wifi and the 5 bars slowly come up in the lower right and say i am connect but over the top of the bars i get wireless icon with yellow star over it; so whats that all about and how do i fix it nothing should be overlaying the 5 bars ?
View 12 Replies
View Related
Jan 10, 2012
I have an HP Mini running windows xp. When its connected to wifi everywhere else it works but this new place it will not allow my internet to bring up anything.
View 1 Replies
View Related
Jan 2, 2013
my netgear wireless modem model - wgr614 v10. When I connect router to PC via LAN cable the wifi speed on my mobile goes to around 8MBPS and as soon as I disconnect LAN cable from PC it went down to almost 0. In short wifi only working fine when LAN is connected to my PC . I have selected channel 11 and Mode upto 54 MBPS and WPA-PSK key. My region is North America and latest firmware is available on my router. As recommended by some netgear support representative I changed the Fragmentation Length and CTS/RTS Threshold to 2304 but the problem is still there. What I noticed after that is as soon as I remove the LAN cable from my PC the wireless network start showing me no Internet access. And as soon as I insert LAN cable again to my PC wifi start working.
View 1 Replies
View Related
Jan 7, 2012
What's happened is that after transferring my old PC's data onto my new one, and putting that one in place of my old one, therefore hooking up my modem to it, my wireless devices have been having trouble connecting to the router. Everything's hooked up fine, and it was working perfectly before, but now my devices such as my laptop and Droid Pro can SEE the router (As in connect to it and say that they are getting excellent signal strength), but when I try to open my browser, it asks as if I'm not connected to anything at all. The PC that's wired to the modem through the router works fine, however.
View 14 Replies
View Related
Dec 17, 2012
I recently moved house and got a new ISP. I followed their instructions and set up my broadband. connection is working fine through the LAN, and I can connect to the wifi on my phone but when I try to connect my laptop via wifi it says it's connected but I can't access the internet and it looks like it's sending packets but not receiving.
View 7 Replies
View Related
Nov 16, 2012
Bought my new Sony Vaio today that of course came with Windows 8. I have completed the setup and installed Norton 360 and Office and tried (unsuccessfully) to uninstall McAfee. Now when i boot up the computer the WI-FI connects (with a full, four bar connection) however, when i try and open IE or the store, I get a connection issue saying there is no internet access. I am using the same Wi-fi network to post this on this forum, so it seems the issue must be on the Vaio side?
View 1 Replies
View Related
Dec 10, 2012
I have a cisco(linksys) E4200v2 which my NIC card recognizes but am unable to connect to internet. cannot connect via cable as 6to4 adapter and ISATAP adapter will not start when cabled to router
View 1 Replies
View Related
Dec 17, 2012
My hp/g62 is fine conecting to the wifi, but browser (chrome or Explorer - the same story) is only sometimes richable. It is alike I can see one website every 60 min. browser says: the website is unavaiable, connect later, and down on it: dns is not responding. Other time: connect error: time out etc?
View 1 Replies
View Related
Apr 19, 2011
Can I connect my laptop to more than 1 wifi signals.
View 2 Replies
View Related
Apr 29, 2012
Can I connect blu ray player to motorola cable box via Ethernet port? My blu ray player won't work with wifi built-in router.
View 1 Replies
View Related
Nov 9, 2011
At first, it says "limited or no connectivity" and after reading possible solutions, it now says connected and has a very good signal but once I open Mozilla or Google Chrome, there's no internet connection. The icon doesn't also have that blue light that I think is an indication that it has internet connection. My roommate can connect to this wifi with no problems, her notebook is Acer, just like mine. We also have a wifi at home and it connects smoothly. I don't why I'm having problems with this aztech wifi here. Btw, I do not own this wifi or router. It's like an open network.
View 1 Replies
View Related
Jan 4, 2012
im at university and im trying to get connected with their wifi. When i start up the computer it says that I am connected but when i try to access the internet it won't load. I have tried doing a virus scan and i have tried using other browsers but i still can't figure out how to fix it. Also, it works when I plug an ethernet cable into the wall but as soon as i take it out it stops working.
[code]...
View 2 Replies
View Related
Dec 15, 2011
My HP laptop connects to the router via wifi always. However page loading is very slow. The google home page can take 30-40 seconds. The other laptop we have works fine. If I connect the HP laptop to the router using a cable it runs very quickly always. I have nortons security installed on the HP laptop.I ran ipconfig/all. I pinged the router default gateway address and got back 192.168.0.1. This worked. I then opened a browser and tried to load a page. It was slow to load.I ran ipconfig/all again. The default gateway address had changed. When I pinged the original default gateway address it was losing 1-2 packets and the other packets were very slow. It seems like the router or wifi is losing packets and the default gateway address keeps changing.
I turned off the wifi and used a cable to the router. I ran ipconfig/all. I pinged the router default gateway address and got back 192.168.0.1. I did this several times and the same address came back. Unlike the wifi example above nothing was changing.It must be this laptop's settings as our two smartphones connect to the wifi router and the other laptop as well and speed is not an issue.
View 1 Replies
View Related
Jan 25, 2012
I have the pk5000 router but the wifi is off. I am connected to another network so is it possible to somehow access my router to enable the wifi?
View 3 Replies
View Related
Dec 30, 2012
My laptop connected to internet with wifi, but it cannot use even my laptop detect connected, when i run trobleshooter it's show 'no valid IP address' even i already set up to automatically detect , restart my wifi router and unplug doesn't make any changes
View 14 Replies
View Related
