Windows 7 Home Black Screen?
Jan 7, 2012
Cannot start my lap/Toshiba NB205-N311/W . Only: Toshoiba Innovation comes up and then black screen , no way to log in, the hard disk lamp flashes once very shortly that's it. I tried CTRL-ALT-DEL, the same as above discribed. Nothing works no F2, F8, the hard drive just won't start. I even took out hte battery and tried only with the cable(just found this advice on the IN, it said the screen will work), but nothing I like my little lap and it always worked fine till today.Well nearly, since some days I could not restart without using CTRL_ALT DEL/Enter
View 2 Replies
ADVERTISEMENT
Jan 24, 2011
black screen with small line in left corner blinking
View 1 Replies
View Related
Feb 18, 2012
i have a comp that runs freezes everything screen fades beeps a couple of times and than that black screens and seems to run very slow i have 4gb amd athlon(tm) 11x2 240 dual process 2.81 ghz 64 bit operating systen on win7 premium dont know why this suddenly started happening and sometimes wont switch on /off?
View 2 Replies
View Related
Feb 22, 2012
I have just installed two DCS-942L cameras and uses MyDlink. The live video is OK from MyDlink, but when I log on to the cameras from "Advanced Settings" the live video is just a black screen, no matter what video profile I select. Like wise I can't select motion detect area, because there is just a black screen.I have tried on tree different computers. What can be wrong?
View 7 Replies
View Related
Jun 15, 2012
I have a DCS 3420 that is connected via CAT5 to may LAN and 2days ago something happened on the laptop, whenever I open the window in internet explorer on Win XP Pro; the camera just show a black screen.If I use any other computer on my LAN I get a clear picture of the Gate that the camera is focused on...I have checked the laptop drivers and updates but ca not see something wrong.
View 1 Replies
View Related
Feb 9, 2011
I installed google toolbar for taskbar but I want yahoo for my homepage
View 1 Replies
View Related
Feb 28, 2011
how can i block another computer on our home network from viewing my screen
View 3 Replies
View Related
Aug 24, 2012
my screen goes blank if not used after about 10 mins how do i extend time?
View 1 Replies
View Related
Mar 8, 2012
My laptop was working fine.Yesterday, I installed VS2008, Google Chrome, and MSDN.Today, when I start my laptop, the screen brightness goes very low when I reach the "enter your Windows 7 password" page.
I have a Sony Vaio vgn-nr11s/s Also, my wireless connection and LAN seems to have vanished into thin air.
View 1 Replies
View Related
Mar 13, 2011
I have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things
View 8 Replies
View Related
Aug 22, 2011
An issue that we have run into is that on some of the machines, black areas appear over the screen at random times.These black areas disappear when the users mouse over and return when the mouse is moved back. The areas are usually small (about 30 pixels wide) and we have had to log the users off and on again.The machines that users are using are Thin Clients (HP and Wyse) and it seems to happen when certain programs are in use (Sage).
View 1 Replies
View Related
Oct 7, 2011
At random times AT NIGHT, while Call of Duty, Black Ops, the signal on the game goes red. I have spent more nights on the phone with ATT without resolution and refuse to call again. An ATT tech has come to our house twice, once to check the outside line and to look inside too. Signal to house is always fine.We bought the 2Wire 2701HG-B since ATT said that our problem was we were running a modem and seperate router. We even sent the PS3 out for service thinking it was the problem. Yet here we are again with a red signal in the game.On the modem, the ethernet and wireless flash VERY rapidly, its more like a strobe than a flash. The internet and dsl lights are solid. We are considering going to cable from DSL.
View 10 Replies
View Related
Dec 31, 2011
I have a win xp laptop which connects via wireless to a cheap belkin router I have a Win 7 pro laptop which is hardwired to the router. The Win 7 machine is NOT set up for home groups. We are all on the same workgroup.
I have added the user name from the XP machine to the Win 7 pro machine with admin rights. I shared a folder on Win 7 and added the user name and gave read/write rights. I have no software firewall.
When I try to connect via win explorer via the workgroup I see the Win 7 machine (after 10 seconds). I see 'User' folder which I can browse and I see the folder that I shared but I can't access it. Access denied...
View 8 Replies
View Related
May 20, 2011
So I have two xbox 360's plugged directly into my dir-655 router with Ethernet cables. I have no idea how to port forward these, correctly and everything I try ends up with my router being reset. I don't have a pc connected to the router, only a wireless laptop.
opening ports for multiple xbox 360's (Black Ops is what we are trying to play).
One thing I do know is that when I tried portforward.com's walk-thru for port forwarding, when I enter the ports into the dir-655 port-forward menu, I can no longer connect to Black Ops at all, it says servers are down (WHICH THEY ARE NOT I CHECKED).
View 13 Replies
View Related
Feb 20, 2012
Does this board supports DirectIO to PCIe devices? I have one, and there is an option in the BIOS for IOMMU (disabled or 64mb) which dosent seem relevant? But ESXi dosent see support for pass through.
View 1 Replies
View Related
Nov 12, 2012
Can't get my printer to work. Bought a black ink do we have to have colored ink aso? It's a hp photosmart-D110a.
View 1 Replies
View Related
Jul 22, 2012
I ran the setup CD and can access my camera from inside my local network. When I try to access it from outside, I can access the camera fine but the video stream is black. I tried RTSP ports 554, 2080 and 5632 with no success (of course I port forwarded the dsl modem as well). My dsl modem is a westell 7500 and my ISP is frontier communications. I contacted their support tech and at first he ran me through the exact port forwarding sequence I had already done on the modem. He then went away for a while and came back to say that I need to upgrade to their fixed internet address service. I understand dynamic DNS and don't think this is an issue because I can contact the camera OK, I just don't get the video through (black screen). Another issue is that the camera is reporting PPPOE 'failed'. The support tech has given me two PPPOE user names and passwords but neither work. The support tech said that they do require PPPOE.
View 3 Replies
View Related
Jan 12, 2011
i followed the instructions on the link and I can not for the life of me get my NAT to display OPEN or even Moderate. Always says STRICT. I have tried all the link and all the videos about forwarding ports followed all the instructions to the T. But the PS3 in the DMZ. And still, Nothing. It's BS.
Using router FW: 2.00NA
Ports Forwarded: TCP 80-81,443,5223
UDP 2005,3074,3075
TCP 3074
UDP 3478
Assigned QOS engine rule to the IP of my PlayStation and set it to priority 1.UDP Endport Filtering and TCP Endport Filtering Both set to independent?Enabled Anti-Spoof Checking?
View 13 Replies
View Related
Mar 1, 2013
Every time i plug in my adapter wusb600n and i got internet i go play black ops 2 my game and my whole pc freezes and if i do an other internet without the adapter and use a sitecom adapter or an linksys pci card everything works good but with the wusb600n i every time get freezes even when im not in game, my pc freezes every time and it is really good internet speed with this dual band adapter?
View 9 Replies
View Related
Dec 28, 2011
Been catching wind of an upcoming super fast router....the Asus RT-66U.Currently their RT-N56U has been the fastest router tested at smallnetbuilder....at over 800 megs throughput.The new RT-66U has a 600MHz processor, and 1 gig of RAM. State table size (concurrent sessions) at over 300,000.
Supposed to be based on the Broadcom chipset..so it'll probably support DD-WRT...but to be honest, I saw some screenies of the Asus firmware for this unit...and holy crap what cool features.url...
View 19 Replies
View Related
Apr 18, 2012
Having some issues with a vpn between two of my locations. Both edge devices are ASA's, and the tunnel is an IPSEC tunnel. Both MTU's are set to 1500 both on inside and outside. (provider mtu setting request is 1514, and both ASA's will be changed out soon.) Unfortunately, some exchange/kerberos auth issues are causing me a problem in the remote site. I perform the tests that microsoft recommends using a length of 1472 on packet ping size, and do not fragment flag (1406 is the largest packet I can push across the vpn) . I know part of this is due to the extra overhead that ipsec places on the connection.
I want to refrain from putting the black hole registry workaround on all of the PC's in this remote location.I've also seen some discussion about manually setting the TCPMSS value down to 1300 on most ASA's.
View 1 Replies
View Related
Aug 30, 2012
Just discovered I can change the focus on a DCS-920 by adjusting the black ring around the lens. It can be focused from very close, just inches, to infinity. I don't see this in any of the DLink documentation.
View 2 Replies
View Related
Jun 28, 2012
We have a customer that has a fiber rum between 2 building. They want to have 2 seperate fibers active that terminate into the same switch on each end. (redundancy).
In building A they have an extreme networks black diamond switch that does not support STP.In bulding B they have a Cisco 4507.
We will ahve to use a layer 3 routed connection due to the fact their switch in building A does not support STP.Our tech does not want to use static route becuase he does not want to setup IP SLA for the redundant connection.
Will RIPv2 work for this scenario and failover to the other fiber if needed? The hop count is the same for each fiber path..
View 2 Replies
View Related
Aug 12, 2011
Three PC's all Win 7. Networking/Homegroup problem. In Network RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RV711 but not access RC710. Under Network Akoya can see RC710 but “You do not have permission to access...
In Homegroup. RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RC710 but not access RC710. Under Homegroup No other homegroup computers are available. In Homegroup the identical password is displayed on each PC. The Akoya is wired, the others are wireless. Summing up the Akoya cannot access the RC710.
View 5 Replies
View Related
May 16, 2011
I have 2 computers running windows 7 home premium and wireless enabled bluray player. One of the computer is desktop and connected to router by wire. Another is laptop and is wireless.Bluray is wireless.I want to establish a network (sharing among all these 3 devices) so that i can stream media from both of the computers to the bluray. At the mean time it would be great to be able to share files between 2 computer when needed.I checked it on google, it says creating a homegroup. I did but another computer does not give me option to join the group, it also has option to create.
View 6 Replies
View Related
Apr 19, 2012
I'm running a Windows Home Server in my LAN and I would like to use it's functionalities (especially the streaming) features from "anywhere" using the same URL.My router is a Linksys WRT160Nv3 running.I've already setup the necessary port forwardings, as most of the WHS sites run on ports 80 (http) and/or 443 (https) and my isp is blocking all ports < 1024 (I know it suck, but nothing to do about)
View 3 Replies
View Related
Jan 19, 2012
I have a need to be able to remotely access, from my laptop running Vista, eight computers on different networks, all running Windows 7 Home SP 1, 64 bit. I have discovered there is an issue with remote access and SP 1.To give a little more info, I am in a group organizing two afterschool programs in two different churches. Each church will have 4 laptops (Win 7 SP1). I need to be able to remotely access each computer from my home at various times to provide reports on usuage, and to troubleshoot any problems. The cost to purchase a program is prohibitive, as this is a non-profit venture to assist kids in need.
View 7 Replies
View Related
Mar 20, 2013
I finally was able to connect two of my computers up to share files. The only problem is My Win7 computer can't see the xp computer although the Xp can see the Seven. When I first set it up Explorer showed the name of the Xp but when I clicked on it the dialog said it couldn't find the computer. The Xp name was in all caps and when I checked on the Xp the name was all lower case so I tried to change the name. When I tried, the OK button was grayed out so I went in to So I clicked on More and was able (I thought) to change the name there. I had to reboot and when I did the computer had just appended the DNS entry I had to give to the original lowercase name.
I was finally able to rename the XP computer! I changed the name to NETBOOK all caps like I had originally thought it was. BUT it makes no difference to the Win7 machine it still can't see the XP machine. I did a refresh and the Xp's name NETBOOK showed up But I am still back where I started from because when I click on it a dialog box just says that it can't access ||NETBOOK.
View 7 Replies
View Related
Feb 28, 2012
My laptop suddenly stopped being able to conect to my home wifi router. It stays at "waiting for network to be ready" while at the back the wifi list stays at "acquiring network adress" for a couple of minutes and then resets to regular disconnected status. All my other wireless gadgets at home can connect with no problem whatsoever.Wifi strength is great and, when disabling security, the laptop connects without a hitch and very quickly. I tried all possible security combinations the router can give me, always using a second wifi device to check if connection and browsing was possible.I tried everything I googled: drivers, firmwares, ipconfig reset renew, started and stopped services, to no avail.
View 6 Replies
View Related
Apr 8, 2012
Are there any logs maintained in Windows 7 when someone changes his/her ip..I mean if I was previously at 192.168.62.111 and then I change to 192.168.62.110 would it get logged somewhere in my PC??How can I view it??And finally how can I destroy that log or stop this logging feature...
View 1 Replies
View Related
Jan 16, 2012
need parent and admin password i did not get it from comet so the cometpar does not work ths is the home access laptop govenment grant scheme xx
View 1 Replies
View Related
Oct 9, 2012
I have 2 windows 7 laptops running wireless and a windows xp desktop connected by wire to linksys router. The desktop has no problems accessing the other computers.One laptop has no problem accessing the other computers on the network. The other laptop has trouble with the windows XP machine. It asks for login info, which there is none. I tested with the laptop wired and it seemed to access it normally. Also, it is not consistant. It sometimes works and sometimes doesn't. I have gone through other posts and made sure that password requirement was off
View 2 Replies
View Related
Apr 5, 2011
I just installed Win 7 pro 64 bit on a new computer / hard drive. I can connect to my router which is hardwired to a computer running Win XP Pro 32 bit, but I can't figure out how to connect to my printer which is on that same network. I can access the internet, just not the printer - which is connected via Ethernet to the router.Is is possible that because Win7 is 64bit and the other computers on the network are 32 bit running XPpro - that it won't work? I have another XP pro computer that is connected via wireless that accesses the printer just fine.I have a netgear USB adapter on both the WinXP computer and also the Win7.Win7 is foreign to me. I can't find anywhere where I would 'join' the mshome network. It asks me about them joining ME.
View 10 Replies
View Related
