I have just given my Mum an old Dell desktop computer of mine. She has BT Broadband with a Homehub. I have connected everything up and installed the Homehub software on the computer but when it tries to search for the network connection via the BT software, it keeps saying the network card can not be detected. The network cable is plugged in and working. All the drivers are up to date.
View 14 RepliesI open up the task manager and it does not detect my network card even though it is inserted correctly
View 7 Replies View RelatedJust re-installed windows on a laptop i got, i got all the drivers installed, but i cant seem to get the wireless card to show up, i know it has wireless because it was my moms laptop before she got a new one. Ive gone to dell support site and literately downloaded all the drivers on the page. Device manager doesn't seem to be detecting the card at all, the dell Wlan utility wont even start ive reinstalled the driver multiple times i even tried the intel site for drivers.
The big problem is i don't know what wireless card it is and its hard to find out because the support pdf for the laptop shows multiple possible cards.
[URL]
I have a Compaq Presario R3000. It did not hav a wireless card or antenna. I purchased and installed all. I uploaded the drivers and there are no ssues(apparent) with the drivers.I have a Broadcom g Network Adapter. Windows Zero Configuration is started and set to automatic. I reset WINSOCK entries to installation defaults using netsh winsock reset catalog and I rebooted.I am lost and don't know what else to check. Also, this machine doesn't have a wifi button that I can see but the card is
View 3 Replies View RelatedI just got a brand new Cisco 2951 router that has built-in 3 gigabit interfaces cards. We want to add additonal 2 GE EHWIC-1GE-SFP-CU card to it. When it booted up and type show inventory, it did not detect the presence of the card. There was light on at the back of it. I have checked the compatibility on Cisco. The card is compatible with this router. Do we have to install the card with special instructions in order for the router to see it?
View 1 Replies View RelatedWhen I click on the Wireless Network Connection icon it says "Wireless network unavailable." There's also an error message that says "The Dell Wireless WLAN Card is disabled. Use the Dell Wireless WLAN Utility to enable it." When I right click on the wireless network icon it says "No wireless networks were found in range. Make sure the wireless switch on your computer is on. To see an updated list, click 'Refresh network list.'" I don't have a wireless switch. I have a wireless enable icon and it says Enabled. My wireless network is working because my phone sees it and two other networks in the neighborhood. I couldn't find the Dell Wireless WLAN Utility. I also tried my iPhone hotspot. Laptop did not detect it either.
View 2 Replies View RelatedI am facing the problem as my CISCO router is detecting the RS 530 DCE cable as DTE 530idb. I am using this cable for X25 link connectivity. The same cable has worked for more than 1 hour with detecting the cable type as 530 DCE, but suddenly it stops the X25 data transfer. After that the cable type it is showing as DTE 530idb.
Below troubleshooting already carried out.
1. Changed the slot, but same output.
2. Removed the cable & reconnected, but same output.
3. Without connecting to the DTE device also, the cable type is showing as DTE 530idb
We have installed a VWIC3-2MFT card on a Cisco 3945 voice gateway but the router doesnt detect the card. out put is as below;
Router Version
============
System image file is "flash0:c3900-universalk9-mz.SPA.150-1.M.bin"
Cisco CISCO3945-CHASSIS (revision 1.0) with C3900-SPE150/K9 with 980992K/67584K bytes of memory.
[Code]....
I have an issue with the Wireless Network. I have an old Compaq Presario V2000 laptop with WIN XP SP3. I formated the laptop OS and installed all the required drivers. I have a Dlink DIR 300 wireless router to connect to the Internet. I switched on the Wireless button; When I tried to connect to my network in Network connecction, I can't see my SSID displayed in available netowrk connections, though I can see others available connection there. I checked, whether my Router is broadcasting the SSID or not, and yes it is broadcasting. I tried with the security type as "WPA-PSK" with AES as well as with "WPA2-PSK" with AES, nothing worked for me. FYI, my room mate can easily access the network on his Sony Vaio CS 15 laptop with any of these two security type.I am fed up . I tried rebooting the router as well as my laptop multiple times.When I manually connect to my network SSID from "Wireless Network" tab in connection configuration, I see a "X" sign over my SSID with a Tower mark.
View 3 Replies View RelatedI have a Lenovo laptop, and all of a sudden the wireless just vanishes.I notice that just before it cuts out, the music I am playing stutters for about 10 - 15 seconds before it happens. when it happens it cant detect any wireless and when i try to trouble shoot the issue it just tells me to plug in an ethernet cable. I check the wireless adapter settings in the device manager and it's working fine, I uninstall and re install. same problem.what I do find is, if I put the laptop to sleep and wake it up, it SOMETIMES works, but I can be doing this for 20 minutes or after one attempt another weird thing is, if I start it in safe mode it works fine. I have tried to look for all solutions on the web, tried everything, nothing works. currently it's working, but who knows it may cut out at any point..
View 1 Replies View RelatedI am using a gateway nv53a laptop with windows 64 bit. I actually have 2 of them. Internet worked fine for a couple years then it just stopped. I cannot connect through wired or wireless. Icon says no connections are available. When I trpubleshoot it says there is no driver installed. I have already tried downloading and installing the drivers. In the device manager it doesn't even have network adapters listed unless you go to view and show hidden. Then it only lists a bunch of miniports and a teredo tunneling pseudo interface. No network adapter is listed. I have do a factory reset and have even taken the wireless card out of my other laptop and installed into this one and it still doesn't recognize it. Running out of options.
View 5 Replies View RelatedI am trying to remove my BT Homehub2 and replace it with a router connected to the ADSL line using RJ11 to RJ45 cable in f0/0 configured ip address 86.177.164.200.F0/1 is configured to 192.168.1.254 (current BT Homehub IP) this is connected to my 48port cisco switch in port GI1/0/48.VLAN1 set to DHCP and my host is connected to GI1/0/2 and also configured to DHCP.Ignoring the WAP for now, what am I doing wrong? I know it will be a small IP issue somewhere, do I need to configure GI1/0/48 and GI1/0/2 with IP address'? Am I using the wrong ISP address on my routers F0/0 port?
View 2 Replies View Relatedfor some reason my laptop disconnects randomly and i cannot connect again until i go and reset the router. if i try to reconnect without reseting the router i get the message 'cannot connect to BT homehub xxx' it happens at least 4 or 5 times a day, it happened at my previous address too (completely different router & isp) im not quite sure what other info i can give relating to the matter.
View 7 Replies View RelatedMy wife has a Samsung N150 that connects wirelessly everywhere except at home.All other wireless devices work on the BT HomeHub but not the N150.We have just been on holiday and the N150 connected to everything we came across, without a hitch.
View 1 Replies View RelatedUnfortunately we are stuck with a bt homehub 2.0. We all hate this thing with a passion. We cant workout how to open the same port on 2 devices. When we try it says theres a conflict and just refuses to let us do it. So only one of us can play the game we want, without it timing out. Now I've tried the BT forums, there was no support there. I phoned up BT and to my absolute disgust, nobody there knew how to use the homehub, or simply said 'turn off the firewall'.
View 2 Replies View RelatedI have a Toshiba Satellite A665 Model Laptop. Which i bought 2 years back. I got a new wireless Internet connection few days back. but I am unable to use that network in my laptop. I have Windows 7 Ultimate 64 bit OS in my system.
View 2 Replies View RelatedFor some reason, I cannot connect to my new build, yet everything else in the house connects.I thought maybe too many things were connected, so I unplugged everything and it is failing to work still. I am using the built in WiFi from my MOBO, and my antenna is detecting an excellent connection, but when I connect, it was giving me issues.
View 4 Replies View RelatedI have a very basic WLAN setup with a 2106 controller and 3 (will be 4) 1140 APs.As part of securing the network I have been testing the rouge detection. The system has no trouble detecting and shutting down honeypots. I would like to also automatically shut down Rouge on Wire points. The system sees my test AP just fine. And I have it completely open (no security). But the system never detects that the rouge is on our network so no action is taken. I can connect just fine to the test AP with no encription using DHCP and communicate with everything on the network just fine.Is there some setting I am missing that allows the APs to detect that an AP is on wire?
View 2 Replies View RelatedI have an HP Pavilion notebook that was given to me by a friend who had upgraded to a new computer. Due to the fact that she no longer remembered the password to the computer I did a clean install of Windows Vista Home Premium to gain access to the computer. Unfortunately, while the computer seems to be running perfectly, when I attempt to find network connections my computer not only can't find wireless connections, but it doesn't even allow the option of manually creating a wireless connection under my Internet options.My computer has a built in NVIDIA nforce Network controller listed under my network adapters and when I check its status it states that it is working properly, yet it doesn't detect any wireless networks. In addition to this, I've read online that the wireless indicator light on my computer should switch from orange to blue when turned on, but even with my wireless switched on the light remains orange.I've also clicked the update drivers option on the NVIDIA network controller, but it states that the drivers are current and changes nothing.
View 14 Replies View RelatedI have Lenovo N100 , today i installed a new xp window but after that my laptop is not detecting network.
View 1 Replies View RelatedI have just taken delivery of a new Inspiron N5110 with an Intel Centrino N-1030 wifi card. I also have two dual band routers (LInksys WRT600N) in different locations in the house.
My problem is that the laptop is detecting my routers Wireless-G signals but NOT the Wireless-N signals. I have checked to ensure that the N-1030 card has 802.11n Mode set to Enabled and have also tried both setting under "802.11n Channel Width for band 2.4" (i.e. Auto and 20 MHz Only) with no success.
My routers are configured with the Wireless-G signal only on 2.4 GHz and Wireless-N only on 5 GHz. I found this to be the best setting to avoid interference from neighbors wifi and cordless phones and have been happily using Wireless-N with my other Dell laptop with no problems (XPS M1530 with Intel 4965agn wireless card).Does the N-1030 card not work with 5 GHz Wireless-N?
i got a compaq mini cq10 400sa given to me by my friend for the mean time as my laptop has stopped working. it runs on windows 7. it is not detecting any wireless network whatsoever.
View 5 Replies View RelatedMy Toshiba Satellite Pro laptop has suddenly stopped detecting my wireless network. IT detects every other network in the area but mine. Other computers in the house have no problem detecting and connecting.Wireless is enabled, it happens no matter how close or far from the router. The network is set to broadcast the ssid, etc. I have not changed any settings on my laptop or router, this has suddenly started happening. Have updated drivers to no effect.Occasionally, the network pops up when I re-start the laptop. Rarely works and sometimes it will detect the network, then fail to connect, then the network can't be detected at all.
View 1 Replies View Relatedmy Toshiba satellite L305-S5974 is not detecting wireless
View 4 Replies View RelatedI think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View Relatedhave a TP-Link G router, was getting 736kb download, have set up a TP link N (300) but am only getting 560kb download, (my standard BT home hub N was also not as good giving me 640kb download....
with Wired conection results were....
TP-Link G - 752kb
BT Homehub N - 648kb
TP-Link N - 590kb
laptop - Dell XPS, with N wireless
Windows Vista, sp2.
used [URL] to check all the speeds.
why the TP-Link G is so much faster than both the BT Homehub N or the TP-Link N ?
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedIn the bottom floor there are three computers, an iMac computer that receives an average wireless Internet signal, desktop computer and a laptop.I want to take care of the desktop computer and buy a network card, the next card:TP-Link TL-WN951NNow it has three antennas, each of its reception range is 2 dbiI should buy three of the 10 dbi antennas and connect them to the network card?It will give a good solution strong wireless signal and good speed?
View 4 Replies View RelatedI have a small office with 5 computers. All are Windows 7 and networked via a domain and a central server. Internet is T1 - we have a modem, router, and switch in that order. One of my computers just stopped recognizing the network and has no internet. I have checked all the cables and know that the internet is running to the computer because I have a VOIP phone on the same line that works fine.The computer can recognize the Network card and says that it is functioning properly.All other computers are functioning properly and are all able to see the network and have internet.
View 1 Replies View RelatedI currently have a netgear 600 router transmitting both 2.4 Ghz signal and 5 Ghz signal but my laptop can only receive the 2.4 Ghz signal. My question is should I purchase a 5 Ghz signal wireless card and does the benefits outweigh the cost?
View 1 Replies View RelatedAt first it seemed to happen everyday at the same time, but now seems completely random (happening twice a day somedays). At some part during the day while the user is busy with this system it drops the network connection. The ONLY way to get it back is by restarting via the reset button. Shutdown or even logoff just hangs. Nothing regarding that card will work or respond, you can not even disable and re-enable. I can however get the wireless to work without restarting. I've done everything I could possible think of including format and re-installing Windows. Something new I've noticed is that the user always has MS Access (in runtime mode) running while network goes down and then you can not end that process.
View 3 Replies View RelatedI have a client using a Dell Poweredge SC440 server. About a month ago the system crashedfter some detailed checking I found it had burned some caps. on the motherboard. I replaced the motherboard & had to reinstall SBS 2003. Since doing this I can't get the server network card to connect. The machine does have 2 NIC's one for the server & one for the internet, neither of which will connect. I believe I have the IP address of both cards incorrect. Could someone tell me what the correct IP addresses (all of them) should be for a new install of SBS 2003? I know the IP address of the router & the service provider (AT&T), but these don't work. I do have a printout of the server when it was originally setup but it only give the server IP which is 192.168.2.1 I have put this address in the IP of the card but don't know what goes in the default gateway nor the perfered DNS
View 6 Replies View RelatedI have disabled / enabled and unistalled / installed and updated driver software but to no avail.It has been replaced, I have refreshed TCP/IP as per previous instruction found here and it did go a bit further, but now stuck as per below from CCX diagnostics Utility:
[code]...