Bytecc Landisk ME-850 - Disk Not Found
Sep 16, 2011
I just got a Landisk today, and I can't set it up for the life of me.
Bytecc Landisk ME-850
WD Caviar Blue 320GB
When I look at the drive status section, it always says "Disk not found". The light that designates HDD read/write never comes on. When I hit the format button, I get a error message that only shows for a split second. The error message says: Action Fail Error Code: Please Refer to Manual. Nothing in the manual or Google explains this error.
The instructions say that the HDD you use has to support UDMA. Does my HDD support that? It's the only thing I can think of.This is all really strange because when I first plugged the drive in, the HDD light came on and was solid. But when I formatted the drive, the space was only ~2.7GB, so I thought something was wrong, and I did a factory reset. After that, the HDD light has never come on, and the "disk not found" error persists.
View 3 Replies
ADVERTISEMENT
Jan 20, 2012
Want to transfer email and email folders to a disk. I have Windows Vista on my computer and I use Comcast for an internet server.
View 2 Replies
View Related
Sep 25, 2011
how do i check c disc for error on start up i get a blue page saying disc c errors cancelled i want to resume scan tride run chkdsk but i dont no how to place the f parameter to clear errors it also states i must be administrater baffled
View 2 Replies
View Related
Oct 18, 2012
On a windows 2003 data server with a 2008 domain controller, I have several Terminal Servers that are setup to only allow one remote time entry program to run. Totally locked down from network / internet (Kiosk Mode). Now I need to be able to view pdf files in a directory. How can I do this without giving access to the disks that are available for the time entry program to write back. The time entry requires a mapped drive with read/write access. Every pdf viewer I have found so far gives the ability to "File Open/Save as" and thereby gives access the the shared drive. If I use an Internet Browser then I have the same problem.
View 1 Replies
View Related
Feb 23, 2011
Where can I obtain free driver for wireless adapter for xbox 360.
View 1 Replies
View Related
Dec 20, 2011
I have two computers but only one of them has Hard Disk.I want to run both computers on that single Hard Disk by ntworking.
View 1 Replies
View Related
Mar 26, 2011
how to copy files from hard disk to hard disk through cmd
View 3 Replies
View Related
Oct 16, 2012
if the network i'm planning on will even work so i drew a picture on my project (attached). All cables will be gigabit compatible as will be the switches. The reason i will have 2 switches is because they won't be in the same building. The uppermost switch will be physically next to the router to enable me to have gigabit connection between the DiskStation and the PCs/HTPC without having to change my router (in fact can't change it due to special firmware for my internet TV).
View 4 Replies
View Related
Dec 18, 2012
I have purchased a new hard disk, but my DVD ROM is dead. i have one another system. How can i boot the new hard disk from network..?
View 1 Replies
View Related
May 3, 2011
i can't access the internet without the internet setup disk.I don't have it anymore does anyone have a spare
View 19 Replies
View Related
Aug 20, 2012
How can I remove viruses from my flash disk USB
View 1 Replies
View Related
Apr 13, 2011
My customer is tight on SN space, so they set up 400GB for the ACS AM. I saw a message about having less than 500GB flash by during the DVD install, but it seemed OK otherwise. When the VM boots off the HD, I get the localhost login prompt, and I type in setup, but nothing happens for about a minute, then I get the message 'INIT: ID "S0" respawning too fast: disabled for 5 minutes". After that, nothing. I've booted multiple times. Is this related to the disk space, and is it possible to install with less than 500GB?
View 7 Replies
View Related
Jul 1, 2012
Is it possible to have RAID configuration on your virtual hard disk of your virtual machine?As an example case is I have 1 PowerEdge R910 which I have installed it with Windows Server 2008 R2 Enterprise Edition and i used it's Hyper-V as the hypervisor. the HDD's of the PowerEdge are not RAIDed. I want to make 4 virtual machine's which are installed with Windows Server 2008 R2 as a virtual OS on Hyper-V and i want only 1 of them that has it's virtual HDD is RAIDed.
View 4 Replies
View Related
Mar 25, 2011
windows xp trying to setup wireless network in home.i dont know what my wpa key.
View 1 Replies
View Related
Apr 1, 2011
I have twho Windows 7 laptops that I want to connect to a Time Capsule, I have no problem at all with one of them, but the other laptop is giving me the error in my question
View 1 Replies
View Related
Jul 20, 2011
I have a dlink dir-655 router and an action tec dsl modem on windows 7. I connect with ethernet to the router for my cpu and use the wireless for the rest of the house. I used to have this working flawlessly but ever since I moved I've had trouble, I also just bought this computer so I was hoping for a clean start. I set up the modem and put in the ATT p/w and user name and installed the router drivers and set it up for PPPOE with the correct passwords but it only works when I connect my cpu directly to the DSL modem. I'm really struggling to figure out what could be causing this. Does the router need to be in some sort of bridged mode or something? I didn't run the ATT setup disks on this new cpu b/c I didn't think I would need to and I don't like putting their crummy software on my cpu.
View 7 Replies
View Related
May 31, 2012
I bought a new Linksys AE2500 dual-band wireless-N USB adapter but I misplaced the setup disc. Is there any way I can get another disc or download the setup files and then transfer them to my other computer?
View 1 Replies
View Related
Sep 13, 2012
how to use hard drive as network boot-able disk
View 2 Replies
View Related
May 29, 2012
How do I install or get a installation disk for D-link model dir-601 Router
View 1 Replies
View Related
Apr 28, 2012
does a spanned drive have any protection against disk failures?
View 2 Replies
View Related
Dec 23, 2012
i need to reinstall my belkin F9K1002...i do not have the disk and i can not connect to the internet through the router, it wont recognize the modem.
View 8 Replies
View Related
Jan 31, 2011
Well, I am just curious, how much hard disk does a WAG200G has? And how much memory and what processor? Is it hard to point me to a datasheet including every chip or/and component it has?
View 3 Replies
View Related
Apr 14, 2013
My SCE1010 show the alert "Not enough disk space" in log.I find old discuss , someone say can delete the file: /tffs0/SYSTEM/PREVDBG.TXT , because the file is too big.But I don't confirm delete the file will not effect system work fine. [code]
View 8 Replies
View Related
Apr 8, 2013
I was asked to performe upgrade from acs 5.3 to 5.4 (vm), but i noticed that someone installed it on 80gb partition and there is 500gb as one of the requriments in upgrade and install procedure. What is strange to me is that "dir disk:" command shows such an output: 5165345067 bytes available.And under ESX i see 80gb partition. Anyway, is there any way to extend partition size to 500gb? Can I just change it under ESX? Is there any procedure to take under ACS console?
View 1 Replies
View Related
Jan 25, 2005
Because the /var is 99% full, I have problems with taking backup. I have also problems with login into the web-page. I’m authenticated, but then I get: User Role is empty.
View 5 Replies
View Related
Jan 17, 2013
We are running ACS 4.1 on Windows 2003 server. The disk filled completely up with years of log files. We have freed up space but now none of the services will start back up either automatically or manually.
View 4 Replies
View Related
Apr 7, 2010
We are getting ready to bring up 2 new 5.1 ACS servers to replace our ACS 4.2 configuration.The documentation says that 512GB of disk space is required for each server. This means we will need to request1 TB of disk space. The VMware folks in our group are asking why we need so much space when the 4.2 servers are only using 20 gigs including the OS.
View 3 Replies
View Related
Aug 13, 2012
With converting my hp 7410 printer to wireless. It has wireless capability but i do not have the factory setup disk. What can i do?
View 1 Replies
View Related
Jun 24, 2012
I have a 4 computer MS LAN connected to a router that is connected to a ISP disk outside the house and all computers have internet access. I now want a redundant backup on connecting to the Internet. I have a Wild Blue Internet Disk outside the house that we used to use.Can I install another LAN card and just have that connected to Wild Blue?
View 1 Replies
View Related
Jul 19, 2012
I've lost my set-up disk for my Linksys model WRT160N V3.
View 1 Replies
View Related
Sep 23, 2012
I plugged in a 2TB external USB drive and restarted the router. The Disk Management tab appears blank, doesn't give option to format.
View 4 Replies
View Related
Sep 3, 2012
I am doining a flsh upgrade for 12000 router ... I am following this guidelines
[URL]
when i do show version | i image System image file is "disk0:c12k-os-mbi-3.6.0.CSCsy28524-1.0.0/mbiprp-rp.vm"
but at doc it says : System image file is "disk0:c12k-os-mbi-3.6.0/mbiprp-rp.vm" i think my image has something wrong. what do you say ? actually from step 1 to 16 was going smoothly , but step 17 doesnt go ... and i jump to Flash Disk Upgrade Abort Procedure section and i rollback to old flash disk and now it is working ....
Regarding to step 17, why standby PRP is not ready , it shows no valid partner ?
View 7 Replies
View Related
Aug 27, 2011
When adding a new 256M card to ant slot on BXL SUP, it shows up in log as inserted, but am unable to format it and of course access it. I tried formatting to FAT16 on my MacBook, card gets formatted but remains unaccessible.
View 2 Replies
View Related
