I can use MSN and SKYPE and play games in normal mode but i cant browse web pages properly. They are insanely slow or not working at all. I tried to run in safe mode and everything seems to be fine in there. I tried opera, ie, chrome, mozilla. I saw some post that telling people to run hijack and send the log file so i am sending the log file.[CODE]
View 1 RepliesI am not able to connect to any webpages in normal mode, even after restarting i still have the same problem [However it works in safe mode with networking]. The network connections show that it is connected and the signal strength is excellent. I then have to keep restarting the laptop like 3 to 4 times and it works. Its kind of frustrating to keep doing this all the time and besides i am scared by restarting the laptop so many time can harm it.
View 1 Replies View RelatedHi guys. I'm running Windows Vista SP2 on a Dell Laptop XPS. It seems there were some viruses on the system which I have cleaned out, I believe. I have restored some issues with damaged registry and the system seems to be working great other than I cannot get a strong connection to the internet. It will open up when I first log on, but then the connection is intermittent at best. If I log into safe mode with networking then the connection is perfect, no problems. What I can do to restore the connection to the internet?
View 1 Replies View RelatedLogfile of Trend Micro HijackThis v2.0.4
Scan saved at 08:36:37, on 9/9/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16448)
Boot mode: Normal
Running processes:
C:UsersOrePorAppDataLocalGoogleUpdateGoogleUpdate.exe
C:UsersOrePorAppDataRoamingDropboxinDropbox.exe
C:Program Files (x86)Common FilesJavaJava Updatejusched.exe
C:WindowsSysWOW64RunDll32.exe
C:UsersOrePorAppDataLocalGoogleChromeApplicationchrome.exe
[code]....
When I normally start my pc i cant access the internet. I use the built in diagnostic problem program. First it tell me to reset my winsock cause somethings wrong with it, and I do, but then after i restart my pc i still can't connect to internet . So i run the diagnostic thing again and it says something like "contact the person that manages your windows product support or go online to support.microsoft.com/winxp" and I did and nothing worked. But for some strange reason I can access the internet when i run my pc in safe mode with networking. So how can i fix it so than i can access the internet in normal pc mode...? I've tried alot of programs and different form of resetting it in the command prompt.
View 16 Replies View RelatedI have ran Superantispyware and malwarebytes and have not found any known issues on my comp. I am running Windows 7 starter on my netbook.Here is my hijack this log[CODE]
View 1 Replies View RelatedMy T-mobile dongle works in safe mode but not in normal mode.
View 1 Replies View RelatedMy PC Info: Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3069 Mb
Graphics Card: ATI Mobility Radeon HD 3450 , 256 Mb
Hard Drives: C: Total - 305242 MB, Free - 252510 MB;
Motherboard: Dell Inc., 0F700C, , .8QQVVG1.CN4864388L1948.
Antivirus: Norton Security Suite, Disabled
So I am having issues connecting to the internet. I can connect during safe mode but not on normal boot. I ran a diagnostic and it said that the IP Gateway failed. I read a previous post and did the command promp "ipconfig/all" and this is what it said:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersEbony>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Ebony-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
I have norton, and have recently run Malwarbytes, Microsoft Malicious Removal Tool, and Dell PC Tune Up
Network Adapter not found on Device manager in normal mode, when in safe mode it shows the Network Adapters
View 1 Replies View RelatedI recently bought a new Dell XPS Ultrabook 13 with i7 processor. It worked fine for about three weeks, then all of a sudden it refuses to connect to the internet. I am still connected to my wifi network, but the network and sharing centre shows the connection as dropped between the hub and the internet. Troubleshooter offers no answers. I know other Windows7 users have experienced this and so I have ALREADY done the following:
Tried accessing the internet in safe mode with networking. This works, so it is not a hardware issue. I can definitely access this web in this way.Rebooting my wireless router etc. I know this is not the issue though, as other devices such as my iPhone can still access the web through it (and the XPS, in safe mode)
Possible spy/mal ware. I think this is unlikely. A) the laptop is new b) I am extremely careful on what I download c) I have run repeated full system scans with both my preloaded AV software (McAfee) andMalwarebytes anti-malware. Neither has unearthed anything at all. Not a single item, and they both are checking against the latest databases.
I ran msconfig and deselected all startup programs and services except MS ones. I also downloaded and did similar through ccleaner. No joy.I checked devices through device manager. All devices seem to be working normally. No conflicts. I disabled and enabled the network wifi miniport adaptors. Again, nothing.The most frustrating thing is that I haven’t actually made any system or setting changes recently, so I don’t understand how this could suddenly have just happened. My only suggestion is that I downloaded the usual round of MS updates the other day.
I have purchased a new cisco router 3845 and i can`t start the router when i power it on in the normal mode either on the rom monitor mode.It seems it hangs up , the attached shows the last thing appear to me even if i plug on the second power.It gives no chance to enter anything in both modes.
View 4 Replies View RelatedWe are in the situation we have a active configuration with ACE30 doing normal load balancing in routed mode, we have tons of rservers going out on a VIP.we now had to add a new private network to a provider that strangely enough does not want to see our public or private addresses. we need to loadbalance towards him on a priovided subnet (still rfc1918) (IOS VRF bug? is that correct?)I have two options, add the network (new interface) to the active loadbalancers (contexts) and then tie in new policies to the active serverfarms or make a new context just to load balance towards this provider.(preferred)Now - If I do this, the rservers see the client source addresses from this new provider. as the loadbalancer does not "hide" the client IP's. I would then have to add static routers toward the new context - I would want to skip that.
is there a way, to make the loadbalancer hide the client addresses towards the rservers ? perhaps I'm just needing the correct search term to find the config example.
I accidently went into bridge mode on my linksys E2500 router. I want to reset it back to normal but i'm not sure how to do it. i tried the little reset button on the router but that didn't change it.
View 4 Replies View RelatedI have a 512MB USB Flash device and was able to boot the IOS on the C2960 from it.After that i tried to Copy the IOS file from the USB to the system flash, but it could not find the USB Device.At plugging in the device the systems tells me: "Transfer type 2 not supported" I configured the USB device in NTFS and FAT both are able to boot with the ROMMON, but the normal system does not accept them and i know i can do the copy over a TFTP from my laptop, but it is strange that rommon accepts the usb device and the system does not?
View 1 Replies View Relatedi new in this forum,i just want to know it that possible we can configure the normal wireless modem?.From my knowledge we can configure manually for cisco router or switch at pc by doing on hyper terminal. It that normal wireless modem can be configure using hyper terminal?.
View 2 Replies View RelatedMy network is slow with a normal switch connection. How do i improve the connection and can cisco switch improve performance?
View 6 Replies View Relatedwhen im on my laptop and im on the internet,the connection goes from normal to Limited (yellow triangle caution sign by connection),non of the pages will load after that,i use diagnostics repair to fix the problem which works about 40% of the time,but is only temporary again.give it 5 minutes after the fix it happens again,diagnostics say the problem is with the wireless adapter card which is built into the laptop itself.i do and dont think this may be the cause since everything house loads perfectly fine but can have the occasional drop out aswell,on average i'd say it drops out about 10 times a day and i find it kind of frustrating.My Laptop is a Acer Aspire v3-531.My internet is with Virgin Media and i get around 60 MBps with them but the disconnections drop it to about 7mbps and keeps going down till the connection is actually gone.
P.S:The intel Proset wireless framework on this computer fails the hardware test straight saying the wirless hardware is not bound to the transport driver? what do i do?
I'm planning to replace my flaky minipcie wifi and I need advice about the antenna.My laptop has two sets of antenna, one for 3G WWAN and the other is for normal wifiAccording to the labels, both is "Main" and "Aux". The card that I'm planning to get is an Intel 5300 which has 3 antennas.Since the normal wifi only has two antennas, can I use the 3G WWAN as a third antenna? If yes, should I plug in the "Main" or the "Aux"? If no, Should I buy those additonal antennas in Ebay for the 3rd one?
View 2 Replies View RelatedI was having an issue with Comcast phone and internet services.Comcast had me disconnect and reconnect my modem and router. When service came back to normal one of my network connections was no longer available to me. I have two connections (one for use at my home which is a secured one) and one I use when I go to my sons home. My computer now only allows me to connect to a network called "Linksys" which may be available to the public. The connection I want to use shows up if I go to control Panel/View Network Status/Manage wireless network, and it is the first choice on the list, but the computer always uses the unsecured "Linksys". I'm afraid to do my banking over that network but I'm also afraid to start fooling with it and having no network. [code]
View 14 Replies View RelatedI am having difficulty uploading files on the internet because the speeds are so slow. My download speed is 23.88 MBPS, bu upload is .3 mbps. This seems to be a recent problem. The other computers on the network get upload speeds of 5mbps and do not have any problem, so I think there is some problem unique to this computer, and not a network problem. I can't back up my files because the speed is too slow.
View 8 Replies View RelatedOne day, my rv042 started emitting a very high pitched sound. The lights will flash upon powerup, but not act normal (indicate link, etc). The router cannot be accessed at all.I changed the power supply to a known working one to eliminate that--didn't work.
View 4 Replies View RelatedIs there any official Cisco reference to describe what is considered to be the highest acceptable production CPU load on 2800 routers? I found the document "Integrated Services Routers G2 - Performance Overview" that states at page 5,Most service providers set their CPU alarms to 60 or 65 percent. Many enterprise customers are comfortable running production networks with CPU around 70 or 75 percent.
View 3 Replies View Relateddifference between a gigabit switch router and a normal router google email harvesting edited by moderator:removed email addy to protect from spam
View 1 Replies View RelatedMy Main computer (which has a wired connection to router) internet is running so slow, i mean so slow that i cannot even do a speed test, it keeps failing, im continuously getting server timed out messages when browsing, and to watch a youtube video of 1 minute long it will take about 5 - 10 minutes to stream it before i can watch it. However despite the above the two laptops and ipad work great, i have a braodband speed of around 16megs. Now here is everything i have done so far. After calling my ISP to se if it was their fault, which it turned out not to be, they got me to change all the DNS and IP settings to manual, they gave me all the numbers to put in. Again that did not work so i used namebench to find the quickest DNS servers for me, that didnt work ethier so i just reverted all settings back to automatic as they were before.
View 13 Replies View RelatedWhat is the remedy/procedure to make a deformed CAT-5 cable into normal condition.
View 1 Replies View RelatedIs it normal for an E1000's LEDs to get dim after a few years??Because my LAN port #1 and #2 are dim, as well as the power LED.I'm guessing it's just because they are always on?
View 5 Replies View RelatedI have a couple of 5505's with base licenses. One of the two has a limited output when running the sho version command, as it has a restricted license. What license I would need to buy in order to bring it up to "normal" base license ?
View 1 Replies View Relatedjust installed 6 new APs to a client remote site off a 5508 controller. 5508 is running 7.0.116 total of 78 installed APs, mostly 1142's with a dozen or so1242s. All going perfectly until I was about to leave site and noticed two of the APs had no LEDs lit. Checked in the controller, as I had renamed them so knew they were on the system, and they are both there. Connected to each of them and was successful and everything seemed ok - no blue LED though. Rebooted them and the LEDs work as expected during the boot process but as soon as they have entered normal operation the LEDs go dark. urls....but no reports of it with anything other than 3502's.Change process is galacial and heavily monitored so dont want to invoke it if it wont address the concern.
View 10 Replies View RelatedI wonder what will be a normal speed for the anyconnect client when connected over the internet to a ASA 5550 vpn edition? Is it normal to get max 2 Mbps or higher?
View 3 Replies View RelatedWhat is the ratio supposed to be between the download speed and the upload speed in a normal working configuation? My webpages are taking forever to load. I used this speedtest... url...
-download speed: 7.427 Mbps
-upload speed: 0.006 Mbps
My provider is cable, Brighthouse, hooked up to their Scientific Atlanta modem and from there it is hooked up to a Belkin Connect N150 wireless router. I am not using the wireless on my laptop but am wired directly to the router. [code]
I have an odd problem with the FTP server. I currently hooked up a 250GB portable HDD which is formatted in NTFS. A single folder in the root of the drive is mounted as the FTP server. Every time I upload a zip or far, the file comes out ends up being uploaded corrupt and double the original file size. I have used 2 FTP clients, using either ASCII or binary. No matter how I go about it, I can't make the files upload at the normal file size. Its not just archives, however, I tried an mp3 and it too got uploaded corrupt and double the size. I then downloaded the mp3 to try and play it but it didn't play in windows media player. However I loaded the 'corrupt mp3 into audacity and the file played like normal.
View 5 Replies View RelatedWe have a new stack of two Catalyst 3850-48T's running IOS XE 3.02.00 (we are upgrading to 3.02.01 this weekend.)We noticed the CPU usage is around 30% even when there is almost no traffic going through the switch. We haven't seen any indication that it is causing a problem, but is this considered a normal baseline?I attached my config (with passwords sanitized,) show ver, show controllers utilization, and show process cpu history.
I noticed this behavior is normal on 2900XL/3500XL switches, but I didn't find anything relating it to 3850 switches. Does the same thing apply to the 3850 switches? [code] url...
we are seeing network latency problems and our cpu on the 6509e is spiking and have a above average % for the past week or so. When we do see these spikes it seems that snmp and apr input is high
CPU utilization for five seconds: 75%/53%; one minute: 17%; five minutes: 14%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 9 1636168 95505 17131 4.19% 0.36% 0.34% 0 Check heaps =======>
12 478096 1011864 472 3.07% 0.12% 0.12% 0 ARP Input =====> 52 30420 436000 69 0.07% 0.07% 0.07% 0 Per-Second Jobs
53 317496 7789 40762 0.87% 0.10% 0.06% 0 Per-minute Jobs
220 55380 87807 630 0.07% 0.06% 0.07% 0 Compute load avg
[code]....
we recently upgraded our 3560 switches to the new 12.2-55 ios version but have not upgraded our 6509 because its ios is on 12.2(33)SXJ1. Not sure if this is related or not but it seems that after we upgraded to the later ios that the latency started.over the last 24 hours the spike is several times an hour and at least one a day that it hits the 90 - 100 % mark.is there a way that we can limit what snmp view but would not effect functionality or network?