Can't Access Internet In Normal Pc Mode
Apr 12, 2011
When I normally start my pc i cant access the internet. I use the built in diagnostic problem program. First it tell me to reset my winsock cause somethings wrong with it, and I do, but then after i restart my pc i still can't connect to internet . So i run the diagnostic thing again and it says something like "contact the person that manages your windows product support or go online to support.microsoft.com/winxp" and I did and nothing worked. But for some strange reason I can access the internet when i run my pc in safe mode with networking. So how can i fix it so than i can access the internet in normal pc mode...? I've tried alot of programs and different form of resetting it in the command prompt.
View 16 Replies
ADVERTISEMENT
Aug 20, 2012
I recently bought a new Dell XPS Ultrabook 13 with i7 processor. It worked fine for about three weeks, then all of a sudden it refuses to connect to the internet. I am still connected to my wifi network, but the network and sharing centre shows the connection as dropped between the hub and the internet. Troubleshooter offers no answers. I know other Windows7 users have experienced this and so I have ALREADY done the following:
Tried accessing the internet in safe mode with networking. This works, so it is not a hardware issue. I can definitely access this web in this way.Rebooting my wireless router etc. I know this is not the issue though, as other devices such as my iPhone can still access the web through it (and the XPS, in safe mode)
Possible spy/mal ware. I think this is unlikely. A) the laptop is new b) I am extremely careful on what I download c) I have run repeated full system scans with both my preloaded AV software (McAfee) andMalwarebytes anti-malware. Neither has unearthed anything at all. Not a single item, and they both are checking against the latest databases.
I ran msconfig and deselected all startup programs and services except MS ones. I also downloaded and did similar through ccleaner. No joy.I checked devices through device manager. All devices seem to be working normally. No conflicts. I disabled and enabled the network wifi miniport adaptors. Again, nothing.The most frustrating thing is that I haven’t actually made any system or setting changes recently, so I don’t understand how this could suddenly have just happened. My only suggestion is that I downloaded the usual round of MS updates the other day.
View 1 Replies
View Related
Feb 19, 2013
I am not able to connect to any webpages in normal mode, even after restarting i still have the same problem [However it works in safe mode with networking]. The network connections show that it is connected and the signal strength is excellent. I then have to keep restarting the laptop like 3 to 4 times and it works. Its kind of frustrating to keep doing this all the time and besides i am scared by restarting the laptop so many time can harm it.
View 1 Replies
View Related
Jul 13, 2012
Hi guys. I'm running Windows Vista SP2 on a Dell Laptop XPS. It seems there were some viruses on the system which I have cleaned out, I believe. I have restored some issues with damaged registry and the system seems to be working great other than I cannot get a strong connection to the internet. It will open up when I first log on, but then the connection is intermittent at best. If I log into safe mode with networking then the connection is perfect, no problems. What I can do to restore the connection to the internet?
View 1 Replies
View Related
Sep 8, 2012
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 08:36:37, on 9/9/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16448)
Boot mode: Normal
Running processes:
C:UsersOrePorAppDataLocalGoogleUpdateGoogleUpdate.exe
C:UsersOrePorAppDataRoamingDropboxinDropbox.exe
C:Program Files (x86)Common FilesJavaJava Updatejusched.exe
C:WindowsSysWOW64RunDll32.exe
C:UsersOrePorAppDataLocalGoogleChromeApplicationchrome.exe
[code]....
View 5 Replies
View Related
Jun 28, 2012
I have ran Superantispyware and malwarebytes and have not found any known issues on my comp. I am running Windows 7 starter on my netbook.Here is my hijack this log[CODE]
View 1 Replies
View Related
Jun 12, 2012
I can use MSN and SKYPE and play games in normal mode but i cant browse web pages properly. They are insanely slow or not working at all. I tried to run in safe mode and everything seems to be fine in there. I tried opera, ie, chrome, mozilla. I saw some post that telling people to run hijack and send the log file so i am sending the log file.[CODE]
View 1 Replies
View Related
Aug 7, 2011
My T-mobile dongle works in safe mode but not in normal mode.
View 1 Replies
View Related
Apr 11, 2011
My PC Info: Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3069 Mb
Graphics Card: ATI Mobility Radeon HD 3450 , 256 Mb
Hard Drives: C: Total - 305242 MB, Free - 252510 MB;
Motherboard: Dell Inc., 0F700C, , .8QQVVG1.CN4864388L1948.
Antivirus: Norton Security Suite, Disabled
So I am having issues connecting to the internet. I can connect during safe mode but not on normal boot. I ran a diagnostic and it said that the IP Gateway failed. I read a previous post and did the command promp "ipconfig/all" and this is what it said:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersEbony>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Ebony-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
I have norton, and have recently run Malwarbytes, Microsoft Malicious Removal Tool, and Dell PC Tune Up
View 6 Replies
View Related
May 24, 2011
Network Adapter not found on Device manager in normal mode, when in safe mode it shows the Network Adapters
View 1 Replies
View Related
Dec 27, 2011
I have purchased a new cisco router 3845 and i can`t start the router when i power it on in the normal mode either on the rom monitor mode.It seems it hangs up , the attached shows the last thing appear to me even if i plug on the second power.It gives no chance to enter anything in both modes.
View 4 Replies
View Related
Sep 23, 2012
We are in the situation we have a active configuration with ACE30 doing normal load balancing in routed mode, we have tons of rservers going out on a VIP.we now had to add a new private network to a provider that strangely enough does not want to see our public or private addresses. we need to loadbalance towards him on a priovided subnet (still rfc1918) (IOS VRF bug? is that correct?)I have two options, add the network (new interface) to the active loadbalancers (contexts) and then tie in new policies to the active serverfarms or make a new context just to load balance towards this provider.(preferred)Now - If I do this, the rservers see the client source addresses from this new provider. as the loadbalancer does not "hide" the client IP's. I would then have to add static routers toward the new context - I would want to skip that.
is there a way, to make the loadbalancer hide the client addresses towards the rservers ? perhaps I'm just needing the correct search term to find the config example.
View 1 Replies
View Related
Nov 18, 2012
I accidently went into bridge mode on my linksys E2500 router. I want to reset it back to normal but i'm not sure how to do it. i tried the little reset button on the router but that didn't change it.
View 4 Replies
View Related
Aug 7, 2012
I have a 512MB USB Flash device and was able to boot the IOS on the C2960 from it.After that i tried to Copy the IOS file from the USB to the system flash, but it could not find the USB Device.At plugging in the device the systems tells me: "Transfer type 2 not supported" I configured the USB device in NTFS and FAT both are able to boot with the ROMMON, but the normal system does not accept them and i know i can do the copy over a TFTP from my laptop, but it is strange that rommon accepts the usb device and the system does not?
View 1 Replies
View Related
Apr 1, 2012
I brought a LAP1131AG, only later found out that it can only be used with a controller.Is there any way I could change the firmware to make it a normall Access Point?
View 5 Replies
View Related
Jun 13, 2012
My Main computer (which has a wired connection to router) internet is running so slow, i mean so slow that i cannot even do a speed test, it keeps failing, im continuously getting server timed out messages when browsing, and to watch a youtube video of 1 minute long it will take about 5 - 10 minutes to stream it before i can watch it. However despite the above the two laptops and ipad work great, i have a braodband speed of around 16megs. Now here is everything i have done so far. After calling my ISP to se if it was their fault, which it turned out not to be, they got me to change all the DNS and IP settings to manual, they gave me all the numbers to put in. Again that did not work so i used namebench to find the quickest DNS servers for me, that didnt work ethier so i just reverted all settings back to automatic as they were before.
View 13 Replies
View Related
Jun 12, 2013
I have a router that needs to be reset to get the internet speed back to a usable speed. It is a fairly old router (D-LINK DSL 2730B) and it does get quite annoying. There is allot of devices connected, which may affect the speed, but I am sure it shouldn't change upon reboot. I literally reboot every hour or 2 during peek periods.
View 1 Replies
View Related
May 7, 2013
Region : UnitedKingdom
Model : TL-WR702N
Hardware Version : V1
Firmware Version : 4.18.114 Build 130314 Rel.39604n
ISP :
I've setup my nano router in client mode and successfully connected it to my existing wireless network by manually setting it's IP address to 192.168.1.2. The existing router has the IP address 192.168.1.1.
I know this has worked as I'm able to access the web management page from any computer in the house by visiting the IP address 192.168.1.2. So far so good.
However, my problem is that the nano router cannot speak to the internet. If I login to the web management page and go to diagnostics, I can ping every other device on the network fine, but I can't ping anything outside the network (e.g. 8.8.8.8 or [URL].
I've tried in vain to get this setup correctly, all I can assume is that the nano router isn't correctly determining that the existing router (192.168.1.1) is where it should be routing all external requests and they're just getting lost, but there's no configuration for that on the web management pages.
View 12 Replies
View Related
Jan 1, 2013
We have a RV120W Wireless-N VPN Firewall and we want to configure the router in brigde mode (transparent). Because we have another Firewall, use for filtering and default gateway on the LAN. The ISP provide IP address by DHCP, so we must connect the internet connexion to the WAN interface. But How can we do for connected the RV120W to our firewall? The router mode on the RV120w allows-it to make this configuration?
View 1 Replies
View Related
Mar 3, 2012
I have a laptop (let me call it A) with Intel Centrino 1030-N wireless (iwlwifi module), running Arch Linux, and another laptop (I will call it B) with Atheros AR928X wireless (ath9k module), running Ubuntu 11.10. They connect to a wireless network provided by a D-Link DI-524 router (802.11g), which in turn connects to a DSL modem (10Mbps/1Mbps link)
Copying files between those machines, either through scp or mounting a share via NFS or Samba, is very slow (at most 200 KB/s) and sometimes fails (times out), even when both machines are inches away from the router. However, downloading files on either machine works correctly at the expected speeds (~1.2 MB/s).
I ran iperf, as recommended in a comment, and it gave me this: [code] The bandwidth is very low, as can be seen from those results.
View 1 Replies
View Related
Mar 6, 2013
Setup N600 DB as an access point using the most recent firmware,3.03.12? Once I do I'm not able to access the dashboard even through I enabled the remote management option.
View 2 Replies
View Related
Jan 17, 2013
I have an n600 ( F9K1102 v1 , firmware 1.00.09 ). My ISP provides my main router for my network, but I want to use the N600 as an access point, I have activated the "Use as Access Point" feature.Is it possible to still utilize the Guest Access feature in this case?
View 1 Replies
View Related
Feb 26, 2013
i new in this forum,i just want to know it that possible we can configure the normal wireless modem?.From my knowledge we can configure manually for cisco router or switch at pc by doing on hyper terminal. It that normal wireless modem can be configure using hyper terminal?.
View 2 Replies
View Related
Feb 18, 2011
My network is slow with a normal switch connection. How do i improve the connection and can cisco switch improve performance?
View 6 Replies
View Related
Dec 28, 2012
when im on my laptop and im on the internet,the connection goes from normal to Limited (yellow triangle caution sign by connection),non of the pages will load after that,i use diagnostics repair to fix the problem which works about 40% of the time,but is only temporary again.give it 5 minutes after the fix it happens again,diagnostics say the problem is with the wireless adapter card which is built into the laptop itself.i do and dont think this may be the cause since everything house loads perfectly fine but can have the occasional drop out aswell,on average i'd say it drops out about 10 times a day and i find it kind of frustrating.My Laptop is a Acer Aspire v3-531.My internet is with Virgin Media and i get around 60 MBps with them but the disconnections drop it to about 7mbps and keeps going down till the connection is actually gone.
P.S:The intel Proset wireless framework on this computer fails the hardware test straight saying the wirless hardware is not bound to the transport driver? what do i do?
View 14 Replies
View Related
Aug 18, 2012
Ea4500 as a wireless access point only mode
View 1 Replies
View Related
Feb 26, 2011
I'm planning to replace my flaky minipcie wifi and I need advice about the antenna.My laptop has two sets of antenna, one for 3G WWAN and the other is for normal wifiAccording to the labels, both is "Main" and "Aux". The card that I'm planning to get is an Intel 5300 which has 3 antennas.Since the normal wifi only has two antennas, can I use the 3G WWAN as a third antenna? If yes, should I plug in the "Main" or the "Aux"? If no, Should I buy those additonal antennas in Ebay for the 3rd one?
View 2 Replies
View Related
Feb 14, 2012
I was having an issue with Comcast phone and internet services.Comcast had me disconnect and reconnect my modem and router. When service came back to normal one of my network connections was no longer available to me. I have two connections (one for use at my home which is a secured one) and one I use when I go to my sons home. My computer now only allows me to connect to a network called "Linksys" which may be available to the public. The connection I want to use shows up if I go to control Panel/View Network Status/Manage wireless network, and it is the first choice on the list, but the computer always uses the unsecured "Linksys". I'm afraid to do my banking over that network but I'm also afraid to start fooling with it and having no network. [code]
View 14 Replies
View Related
Jul 12, 2012
I am having difficulty uploading files on the internet because the speeds are so slow. My download speed is 23.88 MBPS, bu upload is .3 mbps. This seems to be a recent problem. The other computers on the network get upload speeds of 5mbps and do not have any problem, so I think there is some problem unique to this computer, and not a network problem. I can't back up my files because the speed is too slow.
View 8 Replies
View Related
Mar 31, 2013
One day, my rv042 started emitting a very high pitched sound. The lights will flash upon powerup, but not act normal (indicate link, etc). The router cannot be accessed at all.I changed the power supply to a known working one to eliminate that--didn't work.
View 4 Replies
View Related
Dec 11, 2011
Is there any official Cisco reference to describe what is considered to be the highest acceptable production CPU load on 2800 routers? I found the document "Integrated Services Routers G2 - Performance Overview" that states at page 5,Most service providers set their CPU alarms to 60 or 65 percent. Many enterprise customers are comfortable running production networks with CPU around 70 or 75 percent.
View 3 Replies
View Related
Aug 23, 2011
My apartment already has internet provided to all of the rooms, but I'm trying to set up my router as a wireless access point. I tried disabling DHCP on the router, but then I wasn't able to get any internet access at all. Does this device not support bridge mode?
View 5 Replies
View Related
Jan 23, 2011
I have a Wap610n access point, when I am connected on the device in N mode I got an average speed of 50 bytes per sec, in G mode no problem with an average speed of 2.250 meg per sec .I have tried with 2 different USB keys (Belkin f7d2101 and Hercules hwnum-300) but the result is the same.The access point is configured in 2.4 GHz, band 40 mhz only, and I have verified that no other radio emissions are on the same frequencies than the Wap610n in my neighborhood.
View 7 Replies
View Related
