Can't Get A Solid Connection To Wireless Network
Jul 12, 2011
I'm trying to connect a PC to my wireless network but am having issues. Using both a trendnet wireless N PCI network card and a Linksys G510 wireless G PCI network card I have the same issue whereby the connection, an unprotected mixed (B,G,N but have tried only N on the trendnet) wifi, appears in the Windows 7 connection list but upon clicking "connect" I am told Windows was unable to connect to the network, and then the network dissapears. Later on, it will randomly appear and will stay as such until I try to connect.
I've tried using an Asus wireless N 150 USB adapter with the PC, the problem is different. I can connect to the network and the connection will appear fine in the taskbar, but trying to open a webpage either does not happen or is excruciatingly slow.
View 1 Replies
ADVERTISEMENT
Sep 27, 2011
I have a single WRT54G v5 that has treated me very well over the years. I have too many devices right now and I'd like to throughput of N, but have failed to find one that is measurably faster or as stable than my current equipment. Most recently I tried a D-Link DGL-4500 and regardless of hours of configuration, research and support I was left with slower-than-expected speeds and dropped connectivity about once a day.
I want to be able to stream media to all 3 BoxeeBox's simultaneously while browsing the internet on a few of my devices and I don't want to have to reboot my router daily or even weekly.
So far I have come to a preliminary conclusion that a solid setup for me would be a ZyXEL ZyWALL USG20 and 2 to 3 Ubiquiti UniFi AP's. While the USG20 does intimidate me, I have several solid network admins that have told me they'll set up the network for me and walk me through it.
View 19 Replies
View Related
Aug 21, 2011
My e1000 router (v 2.1) has reset itself and after that all lights except the wireless adapter has gone solid blue, I have no ethernet conectivity and hard reset the router did not work.
View 9 Replies
View Related
Jan 18, 2011
Recently we had a situation where our users were unplugging one of our un-mounted 1252 LAPs. They would do this so they could borrow the wire to direct connect any one of their devices not realizing they were disconnecting a wireless access point. After discovering that the AP was unplugged once again, our admin plugged the AP back to the network but noticed that it no longer would connect to the controller. We can no longer console into the AP but can console into all other APs we have. All 3 lights are now green. Radio and Ethernet are solid and Status is blinking. I found the Cisco doc explaining the meaning of the front panel lights but have not found this particular configuration. What these lights mean and why not being able to use the console port?
View 11 Replies
View Related
May 14, 2013
Is it possible to reflash the firmware on a BEFW11S4 (I believe v1, there is no v# after the model number) with a solid red Diag LED? I cannot access the HTML control panel since the router never fully boots. I git this used and didn't know it was **bleep**..
View 2 Replies
View Related
Jun 30, 2011
We have a root AP whose status light is showing solid red. We power cycled it and it still shows solid red. According to the Cisco documentation, this indicates a firmware failure. Unfortunately, we did not get Smartnet with this access points and instead opted for the limited lifetime warranty.
My question is: is there any way to fix the firmware via console? Whether it be through xmodem or what not. I ran debugs on the controller and can confirm that the AP is not communcating with the controller.
It is also weird that the mesh APs that were previously connected to this root AP show a solid red on their status lights and green for their RF LEDs. Shouldn't the status LED be flashing green-amber-red?
View 1 Replies
View Related
Nov 20, 2011
I have a WRT300N and the power light is dim and all 4 ports are solid green along with the internet light being solid green.. Nothing else is plugged in.. Just the power.. I have tried to hard reset and nothing happens.
View 2 Replies
View Related
Feb 18, 2013
Region : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.14.4
Recently in the morning the router will have lost ability to connect to internet <internet light is on> and I cannot access the router page <sys light solid> from either wired or wireless connections. Why is this and will it be solved if I upgrade firmware?
View 2 Replies
View Related
Mar 7, 2013
dcm425 dont turn off also has 4 solid green lights...it happen after a power outage my router works fine but my dmc425 cable modem just has the 4 green solid lights when it's plugged in when i push the power button nothing happens at all
View 3 Replies
View Related
Dec 23, 2012
I have a DIR-615 v e3 router
Did a bad dd-wrt flash and now all it does:
-no power light
-solid green lights: WAN-L1-L2-L3-L4
tried to go to recovery mode (power on while holding reset switch).....does not work.my search on the internet revealed, that after bad flash, power light still comes on, maybe as orange, maybe blinking, or just blinks once
View 1 Replies
View Related
Dec 5, 2012
I was having problems connecting to one of my usb devices that was plugged into my router. I unplugged the router to reset it and whenever it starts up it flashes green and the green light goes solid for less then a minute before turning red. It's a solid red light. I've tried unplugging everything and restarting it and nothing. Ironically it still lets me connect to the internet but when I access the control panel on my computer it shows as disconnected. Is this means my router is busted. This is my second Belkin Router and the only reason I had to replace the last one is because it was a G+Mimi router and I upgraded to an N Router.
View 3 Replies
View Related
Oct 29, 2012
F7D1301 v1 is my router model. i installed it this morning; all was working fine; then i changed password; still working fine; then i attempted to change pw a second time; router turned to solid orange and no matter what i try, i can't get it working again. i reset it, unplugged it, etc.
View 5 Replies
View Related
Apr 14, 2010
I have a Problem with a ASA 5505 when i power on the ASA the Power LED change to green and the Status light to solid amber. There is no Console output or anything else.
View 9 Replies
View Related
Oct 28, 2012
I've not found any topic related to what happened to me. Bought two cameras and upgraded the firmware on both as asked, but one of them just stopped. The light is solid green and not red like other posts.Tried the recovery procedure, but the browser won't find my camera. Changed computer IP and everything else that was told to be done. Nothing works!! I also can't find any posts relaled to my problem all over the internet.
View 3 Replies
View Related
Oct 14, 2011
I have an ASA 5505 with status light solid amber color. It is under SmartNet.I'd like to know Cisco will replaced this device with new ASA5505 or upgrade one?
View 2 Replies
View Related
Oct 16, 2011
I have recently wiped my hdd and installed WinXp, I use to have vista but a crash occurred. I have WinXP SP3 with a Belkin Connect N150 connected to a Arris Telephony modem from Comcast. My setup use to work on vista. I've ran belkin setup from the disc multiple times and it gets to the part where it says connect and make sure cables are connected. All cables are connected, but my router has a solid amber light. I can access arris through wired internet, but I really want my wireless to work.
View 3 Replies
View Related
Feb 16, 2013
I have 2 - WS-C2960-24TT-L switches. Both are experiencing the same issue. Upon booting them up, all lights flash on the mode indicator panel, then it goes directly to a solid green "SYST" light. Nothing registers across the console cable. I have tried different baud rates, cables and computers. None of the ports come up regardless of how long either switch is powered on. Holding the Mode button during boot up produces the same result, nothing. Sounds like they are dead, however, I thought this would be the place to go for ideas. Can I revive these switches?
View 3 Replies
View Related
Nov 15, 2012
I have an Acer 7750G, running Windows 7,connected to our home network using a Dynex router. At the moment this is the only laptop in the house that is having problems with connectivity. Starting yesterday, it only connects intermittently. When I run diagnostics, it says the following problems have been fixed but it either solves the problem for a few minutes only or not at all: "Problem with wireless adapter or access point" or "Default gateway is not available".
IPV6 connectivity also shows 'no internet access' and sometimes IPV4 reports no internet. I've unplugged and rebooted the modem and router a few times but that hasn't solved the problem.
Edit: I ran troubleshoot again, and it says the following issue is not fixed: "Wireless Network Connection 2 does not have a valid IP configuration".
View 14 Replies
View Related
Oct 15, 2011
My wireless network connection is on and off. It is on when I repair.....it is only sustained on in only a few second then it is off again. How to make the connection is on continuously?
View 2 Replies
View Related
Jul 22, 2012
am having win-7 OS & when i am clicking on network icon i cant find other wireless networks.i am able to connect to wireless network.
View 1 Replies
View Related
Mar 27, 2011
As of today under the Network connections I no longer have a wireless network connection. I use a Netgear WGT624v3 wireless router and I have an HP computer running Windows XP. I have tried everything I could find to fix the problem with no luck.
View 7 Replies
View Related
Mar 7, 2012
I am just doing all the Prep work and I find In Ctrl> Network Connection> I have no Icon or Connection only [Local area connection Broadcom 440x 10/100] that's itI did have a [LAN connection via 540T D-Link] Icon there also" but since I started this exercise it has vanished? the Network connection was never there.It is my intention to use this PC as a the base and replace the current D-Link modem with a D-Link DI-624 E1 Air-plus Extreme G wireless Router' and use Wireless to run my wife's iPad 2, iPod touch 3 and my Topfield 2400 Masterpiece PVR from it.Computer DELL Inspiron 2003 Local Disk C: // Pentium 4CPU // 2.4GHz and 512 meg ram File System / NTFS / Capacity / 149.0 GB / 160.031,015,425 bytes Intel Pentium 4 CPU,// 2.4GB // 2.80 Gig + 512 Meg Ram ++ WD 1 Terabyte Exterior HDD partitioned as E,F,G,H all Formatted as NTFS LCD 20" Screen and MS Wireless Keyboard and Mouse.
Intel Graphics Controller 82845G/GL/GE/PE/GV and Running Firefox, Gmail, Windows XP P3? Home Edition // MS Office 2007 // I am connected to Internode B/Band ADSL- 512- 246 5 GiInternode ISP Address is: Internode ISP Current Hostname Ppp118-208-122-129. lns4.bne4.internode.on.net Your Current IP Address 118.208.122.129oIP via Uniden Dig 5.8GHz Cordless Phone (2) Handsets and Base (connected into the Linksys 3102 and ADSL Internode next to the Desktop) and to MyNetFone VoIP Via the Linksys 3102 Gateway ATA VoIP Router, linked to a Nov-2009 - D-Link 502 T Modem Windows Firewall is off! Antivirus== AVARST Pro! Malewarebytes and CCleaner scan Weekly
View 14 Replies
View Related
Jan 12, 2012
I've recently just moved house and we got Virgin Media 50mgs broadband installed with their wireless super hub which is also a Netgear product.However I first noticed up in my room I have weak signal on my wireless devices I have my Dell laptop, xbox 360 and desktop pc with wifi card.I researched this and went out and bought a Netgear wireless extender:
[code]...
Now this does work it gives me excellent signal but it keeps dropping the connection which is extremely frustrating when playing the xbox or on an online game on the pc.I contacted Netgear and all they suggested was updating the firmware
View 3 Replies
View Related
Oct 24, 2012
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) M processor 2.26GHz, x86 Family 6 Model 13 Stepping 8
Processor Count: 1
RAM: 2047 Mb
Graphics Card: NVIDIA Quadro FX Go1400, 256 Mb
Hard Drives: C: Total - 95393 MB, Free - 51699 MB;
Motherboard: Dell Inc.,
Antivirus: Norton AntiVirus Online, Updated: Yes, On-Demand Scanner: Enabled
I recently upgraded my internet to a faster speed. I received a new router. I am able to connect my laptop via ethernet connection without any issues. I am able to connect my laptop wirelessly both at work and at school. I am unable to connect wirelessly at home. I can connect my stand alone computer to my internet connection. I am also able to connect my smart phone to this connection. When I attempt to log into the internet connection I enter the passphrase as instructed the entire screen goes blank and when I try to reconnect the computer is automatically entering a different passphrase and gives me a message "waiting for network" then it disappears and I am not connected - when I attemp to correct the passphase it will not store the new setting. I have tried updating the driver - changing the passphrase - restarting the computer, I have used the diagnostic check provided by Century Link and spent over 4 hours on the phone with them trying various things without any connection.
View 1 Replies
View Related
Oct 16, 2012
Wireless network connection is missing from change adapter setting
View 6 Replies
View Related
Oct 9, 2012
I have an Intel celeron D, optiplex 320, xp. I just bought a wireless usb router and it shows full strength bars but says there is little or no connection. could that be the computer or my mobile connection? I can access internet on my phone though. I am having trouble getting connection to my computer. it was given to me by a friend so I don't know much about it but it is a 250 or 260 bit I think, around that? I have made sure the wifi was on.
View 7 Replies
View Related
Jan 9, 2012
my bt home hub is a far way from my desktop pc. i was using a old wireless network adapter to connect my pc to the wireless connection, it was slow and would always drop. today i brought a high performance gaming network card for my pc( just lan no wirelss), and i also brought a tp-link 300mpbs wireless N access point,i had the idea that i can use the extender to pick up the network, then run a lan cable from the wireless extender to my desktop pc, the guy in the pc shop told me this would work.ive been working on it all day and cannot get it to work, ive used different settings such as client mode,bridge ap mode and repeater mode. i also made a static ip, when the tp-link is plugged into the pc, i can ping to it, but when i try one of the connections. i just get unidentfied network - no internet access. i can connect to the tp-link via wireless with an adapter but i wanted to make use of the network card i just brought!
View 7 Replies
View Related
May 3, 2011
i came home today to find my laptop has no internet connection, but it easily connects to my wireless network, i called my isp custommer support and i find that the only way i get a connection is a directly wired one from my modem, wich is pretty inconvenient, its not just my laptop that cant connect, as my other one cannot either, i have tried resetting my router as well as trying a completly different wireless router and i have the same issue with both, is something scetchy going on with my computers? or am i really that unlucky to be in possesion of 2 routers that broke down at the exact same time o.o
View 1 Replies
View Related
Sep 19, 2011
My laptop connects to my wireless network (airport express) just fine, my son connects his laptops at my place without any trouble & simultaneously - my samsung n120 however gives me a 'limited or no internet access' message. When I try REPAIR It won't find the IP. I've set the IP option to auto & copied the DNS numbers from my Dell. I've updated the card driver - i've reset the IPCONFIG & I can still only get it to connect if my Dell isn't
View 4 Replies
View Related
Feb 11, 2011
I recently replaced the hard drive for m y laptop and I am desperatately trying to set up a wireless connection for it but when i open up the network connections box i can't se a wireless connection icon.I was able to get a wireless connection with the old hard drive.
View 1 Replies
View Related
Mar 18, 2011
I am currently having problem Enabling my wireless network connection by using AE1000
My system info are as follow
p4p800-e deluxe (mainboard) intel pentium 4 1gb Ram Window 7 32 Bit Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller Intel 82801EB USB2 Enhanced Host controller - 24DD (USB 2.0) ZoneAlarm(firewall)
After intalling AE1000 Driver, I was unable to connect to internet and Wireless network connection appeared disabled in my Network Connections folder. However it is shown to be Enabled in my Device manager screen. no matter what I do, I am unable to enable the connection and connect to internet (when tryiing to enable the connection, a enabling screen pops up, and times out. device still shown to be disabled/grey).
I made the following attempt trying to get this fixed.
uninstalling the deivce and reinstalling it. (doesnt work) uninstalling the device, restart and have the windows update install the device (the deviced was installed. however I am still not able to enable it) Disable & Enable TCP/IPv4 & TCP/IPv6 (doesnt work) uninstalling local Area connection and use wireless to connect (doesnt work) download driver from websit, and install it manually. (does not work) connecting thou CD. I was given a msg telling me to disable my 'other' wireless manager and use the windows wireless manager to connect (i have no idea i had 'Other' Wireless manager >.>) testing whither or not the same adapter works on another PC (it works...) Testing wither or not my router is not working... (well.. im typing right now... so it works...)
View 3 Replies
View Related
Apr 28, 2011
Is it possible to connect two distant sites e.g. 30 miles wirelessly? Will there be any issues with Line of sight and interference? Will it be a better solution compared to that of wired counterpart?
View 3 Replies
View Related
Apr 23, 2011
Wireless Network Connection window will not show any of avail local networks
View 8 Replies
View Related
