Cisco :: How Many SDR (Secure Domain Routers) Supported On ASR900
Mar 11, 2013How many SDR (Secure Domain Routers) supported on ASR9001?
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: LAP1142N-N-K9 Regulatory Domain - 802.11a Not Supported
Feb 7, 2013I have two AP models in my network. LAP1142N-A-K9 and LAP1142N-N-K9. The LAP1142N-A works fine with both radios (a/n and b/g/n), but the LAP1142N-N is getting a regulatory domain not supported problem with the 802.11a/n radio, which is keeping it in the down state. I'm in Canada, and my country code on my 5508 WLCs are set to CA. My WLCs are running firmware version 6.0. I read over some specs and the difference between the two APs is FCC cfg vs Non-FCC cfg... Not 100% sure what that means.
View 13 Replies View RelatedMSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?
Jan 10, 2013i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
Cisco Routers :: SRP541W Max Supported SIP Sessions?
May 9, 2013I am curious of the max supported SIP sessionf of the SRP500 series.
View 1 Replies View RelatedCisco VPN :: How Many SSL VPN Users Are Supported In 1921-SEC/K9 Routers
Oct 18, 2011how many SSL VPN Users are supported in Cisco1921-SEC/K9 routers? Or do i need to separately purchase SSL-VPN User license- FL-SSLVPN25-K9 (Cisco SSLVPN Feature License-25 Users) separately?
My client requires 25 Users SSL VPN.
Cisco WAN :: How Many Ipsec Tunnels Are Supported In 3900 Routers
Jul 30, 2011How many ipsec tunnels are supported in Cisco 3900 routers(with & without the hardware processors)?How much is the throughput of the 3900 routers?
View 1 Replies View RelatedCisco Routers :: Is L2TP Over IPSEC VPN Supported In SRP 521w
Mar 26, 2013i am now trying to configure a Cisco Small Business Pro SRP 521w router for a branch office, i am trying to get the router to connect to a L2TP VPN server inside my datacenter, but seems to me like L2TP VPN client function is not supported inside the SRP 521w router.
Can Cisco implement L2TP VPN client into the firmware for the SRP 521w router in the future ?
Cisco Routers :: 527W-U Routed Subnet / Is One-to-one NAT Supported
Jan 15, 2013we are trying to configure one to one NAT translations on a Cisco 527W-U, but are having some problems. We are running firmware version 1.2.4 (003) on the 527.
The DSL line is assigned with a /29 address range x.x.x.64 /29?
The DSL WAN interface picks up x.x.x.65 /32 from the Radius server. We are using the default private IP address range 192.168.15.0 /24 on the LAN (VLAN1), and can get to the internet ok with a PC connected to the LAN.
However when we try to set up a public IP address in the same range (eg x.x.x.66 /29) on VLAN1 (with x.x.x.67 on the PC) it will not connect. (won't allow us to configure an address from the same range as the WAN on a new VLAN interface).
we would want to be able to do one to one NAT translations eg x.x.x.66 on the outside to 192.168.15.2 inside, x.x.x.67 outside to 192.168.15.3 inside etc, but this will not either. We have tried this on a normal IOS router (887) and it worked ok. We have also tried the same on a small DSL router / modem product similar to the 527 from another manufacturer and it worked ok on that, but we wanted it to be able to work on the 527.
We have tried the NAT bypass feature without any success, reading several other discussion forums on this website leads me to believe that one to one NAT is not supported on this equipment at the moment, or at least not at the current firmware release.
One work around would be to just assign a /32 to the WAN interface on the DSL and route statically to a different routed subnet configured on the LAN, however we were wanting to avoid having to do that if possible.
Linksys Wireless Router :: E1000 Secure And Non-secure Hotspots
Jul 12, 2011When setting up my e1000 router for a secure domain it automatically opened a non secure one that my neighbors are using. How can I cancel it?
View 2 Replies View RelatedCisco Routers :: RV016 Can't Access Secure Website?
Oct 25, 2011used to be able to access this secure website [URL] prior to a firmware upgrade. Can no longer access. On Firmware Version: 3.0.2.01-tm. Assuming there's some default setting in the firewall?
View 2 Replies View RelatedRouters / Switches :: How To Secure Network Connections
Oct 2, 2011My itty bitty manual just shows on how to hook up my router via cable modem...nothing on how to secure it. I go into setup of the router and see where one can add info but am at a loss what to enter. I tried, merely by guessing, applied the info, and screwed up my networking. I couldn't even get into my router to revert back, cause i couldn't get on line...finally i reset manually my router and all is well again, except when i see a list of nearby network users, mine is the only one that says unsecured.
View 25 Replies View RelatedCisco :: Is Temperature Monitoring Via Snmp Supported On 2801 Routers
Jun 19, 2012Is temperature monitoring via snmp supported on Cisco 2801 routers? when i perform a snmpwalk i donot get the associated value for the oids.
View 2 Replies View RelatedCisco Switching/Routing :: PIX 515E - Firewall Supported On Ios Routers?
Nov 3, 2012My book says there are two types of firewall supported on cisci ios routers:
Classic cisco ios firewall
Zone-based policy firewall.
zone-based policy firewall with configurations ?
What kind of firewall is supported on Cisco PIX 515E ? Is it Classic CIsco ios firewall or Zone-based policy firewall ?
Cisco Routers :: RV042 - Using Specific WAN Port For Particular Domain / IP
May 21, 2013I have RV042 router which is connected to the internet by both the wan ports and I want to use it as a load balancer so that both of my internet connections can be utilized evenly. But now I have an issue in this scenario as my remote application gets logout whenever the communicating IP address changes. Is there any way out so that I can specify the wan port used for a particular public IP address/domain name?
View 1 Replies View RelatedCisco Routers :: Setup RV042 VPN To Connect To Domain
Apr 5, 2013We are currently running Windows 2003 Domain in our network with DHCP turned on the Server. We have turned off the DHCP on the Router. We are using RV042 as out Gateway to the internet and everything is working fine. We would like to allow a couple of our users to be able to VPN into the network so that they can use Outlook and be able to access their files on the Shared Folder. The users would be using their laptops from their homes to connect via VPN using the standard Windows 7 VPN connection.
In the RV042 Interface there are many options and I am not sure I understand which setting would allow them to connect successfully to the network, be authenicated as a domain user.
Cisco Routers :: Will RV042 Work With AnyConnect Secure Mobility Client App
Jun 15, 2012Will the RV042 work with theAnyConnect Secure Mobility Client app? If so, is there and app note available? If not, which routers wil work with this app?
View 5 Replies View RelatedRouters / Switches :: Wired Router Is Upstream Of A Wireless Is It More Secure
Dec 22, 20112 routers in series, is one more secure. I recently asked about setting up two routers in series as routers, one wireless one not. It was my understanding that the computers on the second router would not be visible to computers on the first router, the wireless one. My assumption was that this would make it more difficult for someone who got access to the wireless router to also access those computers on the second router.
View 3 Replies View RelatedCisco Routers :: SA540 / Unable To Process Data Received From Secure Gateway
Dec 26, 2011Is Anyconnect supported for SA540 I have installed in on my android phone however I keep getting error "Unable to process data received from secure gateway" when trying to connect. If anyconnect is supported on SA540 how do I get it working?
View 1 Replies View RelatedRouters / Switches :: Secure Linksys Router So Only Laptop / Desktop And IPad Can Use It?
Jul 8, 2011How to secure router on my mac - neighbor tapping into my internet service. How do I secure my Linksys router so only my laptop, desktop and iPad can use it? I tried going to 192.168.1.1 but got nothing?
View 5 Replies View RelatedRouters / Switches :: Transferring A Workgroup Laptop To A Office Domain?
Mar 26, 2011transferring a workgroup laptop to a office domain
View 1 Replies View RelatedCisco Routers :: RVS4000 Distribute A Search Domain In Addition To IP Address / DNS Server Information
Feb 29, 2012I have just installed and configured a new RVS4000 with VPN (currently running firmware V2.0.0.3), and have enabled the DHCP Server service. I wanted to be able to distribute a search domain in addition to the IP address and DNS Server information (as I have done with other devices that include a DHCP Server), but cannot seem to locate where or how I might do that with the RVS4000.
View 4 Replies View RelatedCisco WAN :: Is GLC-SX-MM Supported On SPA-5X1GE-V2
Apr 10, 2013If the "GLC-SX-MM" is offical supported on "SPA-5X1GE-V2" ?My customer tested it and it seems to work but now i need an offical statement In the data sheet there is no entry of the requested SFP. url...
View 3 Replies View RelatedCisco VPN :: SA-VAM Not Supported In 7206VXR?
Feb 22, 2011I have a Cisco 7206VXR with NPE-400. The IOS version is 12.4(24)T3. I installed a SA-VAM in the router in slot 6 but getting the following on the console.
AP-Pune-RT#Feb 23 11:16:34.484: %PA-3-NOTSUPPORTED: PA in slot6 (Unknown (type 650)) is not supported on this chassisFeb 23 11:16:34.484: %PA-3-DEACTIVATED: port adapter in bay [6] powered off.Feb 23 11:16:34.584: %PA-2-PABRIDGE: Failed to config bridge for PA 6Feb 23 11:16:35.384: %PA-4-IMPROPER_REMOVAL: Improper removal for slot 6.Feb 23 11:16:35.384: %PA-3-DEACTIVATED: port adapter in bay [6] powered off.Feb 23 11:16:35.468: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed connection id=975, sequence number=677864
Is the SA-VAM not supported in the Router 7206VXR?
Cisco :: LMS 3.2 / 3560V2-24-PS Not Supported In DFM
Oct 9, 2012I have an issue with Cisco 3560V2-24-PS which it indicates not supported in DFM. I can see the device working properly when I do snmpwalk and snmv3 test and device credential test. In fact I can see chassis view of this device.
IP Address = 10.10.1.60
DNS Name = DISTRI_SW02
Device Status = Unknown
Device Type = N/A
Aliases = N/A
Containments = N/A
But in LMS 3.2 supported device it indicates as supported. Current version of the switch is 12.2(58)SE2 which is higher than the minimum requirement 12.2(50)SE1. I tried to downgrade/upgrade IOS and still no luck.
As per information in the creent DFM (see below), it is supposedly supported 59.1.3.6.1.4.1.9.1.1023Cisco Catalyst 3750V2-24PS SwitchDFMDeviceUpdates19.0 Below is the current version of the LMS modules;
Products Installed Showing 1-9 of 9 records Product Name Version With Patch Level Installed Date 1.Campus Manager5.2.110 Oct 2012, 13:11:57 GMT+08:002.CiscoView6.1.910 Oct 2012, 11:27:52 GMT+08:003.CiscoWorks Assistant1.2.010 Oct 2012, 11:27:52 GMT+08:004.CiscoWorks Common Services3.3.010 Oct 2012, 11:27:52 GMT+08:005.Device Fault Manager3.2.010 Oct 2012, 11:27:52 GMT+08:006.Integration Utility1.9.010 Oct 2012, 11:27:53 GMT+08:007.Internetwork Performance Monitor4.2.010 Oct 2012, 11:27:53 GMT+08:008.LMS Portal1.2.010 Oct 2012, 11:27:53 GMT+08:009.Resource Manager Essentials4.3.110 Oct 2012, 13:17:50 GMT+08:00
Also my current device update.Showing 1-9 of 9 records Product Name Device Type Count 1.Campus Manager02.CiscoWorks Common Services03.CiscoView7614.CiscoWorks Assistant05.Device Fault Manager9366.Internetwork Performance Monitor07.LMS Portal08.Integration Utility09.Resource Manager Essentials812 I already downloaded all the patches online and all device updates were also updated.
Cisco :: LMS 4.0 Supported Devices?
Jul 14, 2011There is support of devices not manufactured by cisco?For example satellite modems.
View 1 Replies View RelatedCisco VPN :: Supported IOS For 2611xm?
May 2, 2011Which is the most stable, less processor intensive and VPN supported IOS for 2611xm. Currently I am using 12.4(15)T7 C2600-ADVENTERPRISEK9-M. But this image is causing lot crashes. My router uptime never crossed 4 hrs. It is crashing very frequently. Any issue with this image in 2611."
View 2 Replies View RelatedCisco :: How To Secure Network
Mar 16, 2013I want to know how can I secure the network, I would like to know a complete schema of the insfrastructure, in other words, how to build a network with 4 vlans, firewall? one vlan will be for admin area personal other vlan will be for wifi access secure with password, not everybody will have access to it the other vlan will be for a small personal with at least 20 people. What will be the proper way to build the topology from this hardware that I have shown or with a new hardware. If it is another hardware, what can I use to secure it with vlans ?? This is a small office branch network that as you can see, one switch is on the floor.
View 2 Replies View RelatedCisco :: 1310 AP No Longer Supported On WCS 7.2
Jun 19, 2012After upgrading to 7.2 on my 5508 WCS, the 1310 APs will no longer join. After a call to TAC they said the 1300 and 1400 APs are no longer supported on WCS. Is there any plan to add them back as supported in future releases?I was thinking I could downgrade my backup 5508 and change the APs to autonomous. Or is there some easier way to make them autonomous?
Also, as a low cost outdoor AP, I guess I am reduced to putting 1262s in a NEMA box with outdoor antennas. The 1552s are way too expensive for the quantity I need. Is there some other inexpensive outdoor AP that will replace 1300-1400 series?
Cisco :: WLC2112 Shows Only 6 APs Supported
Oct 11, 2011Recently I purchased AIR-WLC2112-K9, but when I logged in I saw that system shows only 6 APs supported (I made print screen in addition). I'm running IOS v. 7.0.116.0 and I saw that there was some problems with earlier versions of IOS, but not this one.
View 5 Replies View RelatedCisco :: ASA5585-40 Not Supported In LMS 3.2 System
Nov 20, 2011we just purchased 2 asa 5585-40's and tried to add them to our lms 3.2 system and we were informed by cisco tac that they were not supported in lms 3.2. since we don't having funding for an upgrade, any work around within lms that could allow me to add the devices so i can use lms for syslog and to fetch the firewall configs on a regular basis, instead of having to setup a seperate syslog server and having to tftp the config's everytime i make a change.
View 3 Replies View RelatedCisco WAN :: QOS Not Supported On SVI Interface 2900
May 15, 2011Service policy output command is not supporting on Vlan interface of Cisco 2900 Router.I am having one HWic 4ESW Card and configured VLAN interface. But Service policy output command is not supporting.Same config is supporting in the Cisco 2800 Router.
View 13 Replies View RelatedCisco WAN :: ASR 1002 And HSRP Not Supported?
Dec 6, 2011I have a pair of physical ASR 1002 routers, called ASR-1 and ASR-2. I setup HSRP on both ASR-1 and ASR-2 on both g0/0/0 and g0/0/1 interfaces, nothing complicated, just straight forward HSRP.
Now Cisco TAC told me that HSRP is NOT supported between physical ASR routers. WTF!
Furthermore, they told me that HSRP only supported within a single ASR because of multiple routed processors. In other words, you can setup HSRP with a single physical ASR but not with two physical ASR routers.
HSRP can not supported with two physical ASR routers?
Cisco WAN :: Latest Supported IOS For 2811?
Aug 22, 2012latest supported version of IOS for the Cisco 2811?
View 3 Replies View Related
