Cisco Switching/Routing :: 2650 - Copying IOS From DRAM To Flash - ROM Mode

Nov 5, 2011

Here is logs from 2650 router.

2650XM#$ Nov  5 23:10:13.929 MST: %SIGNATURE-3-NOT_ABLE_TO_PROCESS: %ERROR: Not able to process Signature in flash:2600-adventerprisek9-mz.124-25d.bin.Nov  5 23:10:41.963 MST: %SIGNATURE-3-NOT_ABLE_TO_PROCESS: %ERROR: Not able to process Signature in nvram:.
Nov  5 23:11:26.642 MST: %SYS-2-EXCEPTIONDUMP: System Crashed, Writing Core....2650XM#$
 
Right now i am able to access the router . whats this error about -- is router going to crash or reboot?

View 26 Replies


ADVERTISEMENT

Cisco Switching/Routing :: WS-3750-24PS-E Default Value May Be Change Up To 256 DRAM And 128 Flash

Jan 8, 2013

The default value  of  DRAM and Flash memory are 128 MB and 16 MB of Cisco Catalyst WS-3750-24PS-E  switch .I want to know , wherther the default value may be change upto 256 DRAM and 128 Flash.

View 2 Replies View Related

Cisco Switching/Routing :: 2650 - Getting Enable Mode On Router?

Jan 14, 2012

On my 2650 Router it just has only Telnet password.It has no enable mode password set.After reboot it is goes to prompt mode BB.I am unable to go to enable mode .how can i go back to enable mode on this router?

View 13 Replies View Related

Cisco Switching/Routing :: C2960 USB Flash Device Works In ROMmon But Not In Normal Mode?

Aug 7, 2012

I have a 512MB USB Flash device and was able to boot the IOS on the C2960 from it.After that i tried to Copy the IOS file from the USB to the system flash, but it could not find the USB Device.At plugging in the device the systems tells me: "Transfer type 2 not supported" I configured the USB device in NTFS and FAT both are able to boot with the ROMMON, but the normal system does not accept them and i know i can do the copy over a TFTP from my laptop, but it is strange that rommon accepts the usb device and the system does not?

View 1 Replies View Related

Cisco Firewall :: ASA 5520 - Copying Files To Flash Hangs / Reboots

Sep 8, 2011

When I use ASDM or the CLI to copy (ftp) files from my management station to flash on my ASA5520. I get to 99% and then the gui or cli window hangs.
 
The ASA itself completely freezes  i.e. no traffic in or out until I kill the transfer window and then it may reboot
 
[and yes, there is more than enough free space on the flash file system for the files]
 
ASA5520 V8.2(3) / ASDM V6.4(5)                                  

View 1 Replies View Related

Cisco WAN :: 3560x Switch - Copying IOS File To Flash / Failed To Boot

Jan 20, 2013

I have a 3560x switch with the flash formatted . I have tried to solve the problem by copying the IOS file to the flash. But the boot failed either .I have tried to copy the same IOS by the Xmodem, The boot failed again.My question is how to fixed the boot issues after the flash was formatted?

View 4 Replies View Related

Cisco Switching/Routing :: 6509 Copy Sup Boot Flash To ATA Flash

Feb 26, 2012

Trying to copy the system image file from the sup-bootflash to a new 64MB ATA flash card. Yes the software can support the 64MB card.
 
The ATA flash card was formated successfully, however I cannot copy the system image to it so that it can boot after a power loss.
The command I tried was: console(enabled) copy sup-bootflash: slot0:
 
The source filename was typed in as shown in the Show Verison command.The result was: Error opening slot0: no such device.I suspect that I am missing something obvious as I am new to Cisco Switches.

View 1 Replies View Related

Cisco Switching/Routing :: 2900XL Conflicting DRAM Values

Apr 16, 2012

I have a WS- C2924C-XL switch that I would like to upgrade the IOS version on. The IOS version in question can only be installled on an 8MB version of this switch, I have tried to confirm the amount of memory present in the device but I am getting conflicting values depending on where I look.The model number would indicate that this device is a 4MB version, therefore not compatable with the upgrade.Running the show version command from the CLI shows Processor having 8192K/1024K bytes of memory.Accessing the switch via the VMS management interface displays a value of 4MB.

View 5 Replies View Related

Cisco Switching/Routing :: 2650 / 2620 - Support For MPLS

Oct 29, 2011

Does 2650 and 2620 support MPLS ? If yes what IOS version should i download?

View 10 Replies View Related

Cisco Switching/Routing :: 6500 VSS - Correctable Dram Memory Error

Nov 15, 2011

Since yesterday, i see
 
Nov 16 13:23:21.355: %SYSTEM_CONTROLLER-3-MORE_COR_ERR:  255 correctable DRAM memory errors in previous hour
Nov 16 13:23:21.355: %SYSTEM_CONTROLLER-3-COR_MEM_ERR: Correctable DRAM memory error. Count 623, log 8053C830
Nov 16 14:23:21.340: %SYSTEM_CONTROLLER-3-MORE_COR_ERR:  255 correctable DRAM memory errors in previous hour
Nov 16 14:23:21.340: %SYSTEM_CONTROLLER-3-COR_MEM_ERR: Correctable DRAM memory error. Count 879, log 8053C810
 
error on switch console every hour.
 
ios version : Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXJ1, RELEASE SOFTWARE (fc2)

View 4 Replies View Related

Cisco Switching/Routing :: 2811 / Upgrade DRAM Of 256MB To 512MB To Support 15.1 IOS Image?

Dec 12, 2012

I want to upgrade my DRAM of 256MB to 512MB to support 15.1 IOS image.Can I buy Cisco approved DRAM from third party Like [URL]

View 1 Replies View Related

Cisco Switching/Routing :: Editing And Copying Configuration 876 Router To Another

Oct 3, 2012

i have to configure 80 Cisco 876 routers, so i planned to copy config via tftp from one configured router to PC, edit it in text editor (change ip addresses, dhcp pools, vpn keys...) and then copy it via tftp to another router, etc... Configuration looks fine and it works when i paste it in cli, but when i copy it via tftp i'm getting strange problems like dhcp not working or snmp not accessible. Am I missing something.
 
Here's config from router with dhcp problem:
 
ROUTER#sh run
 
version 15.1
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers(code)

View 2 Replies View Related

Cisco Switching/Routing :: Copying Configuration From 7206 To 7600 But Some Is Not Accepted

Jul 27, 2012

i have a 7206 router to be used as a gateway for internet router 7206 inerfaces are connected directly to cisco switch 2960g note that 7600 work only at 1 gega , and cant be used for 10 or 10 . im looking forward to use router 7600 instaed of 7206 i copied the config of 7206 and pased in 7600 but some commands which are under interfaces command was not accepted here is the config which as not accepted in 7600 router

%%%%%%%%%%%%%%%%%%%%%%%%
duplex auto
speed auto
media-type rj45
negotiation auto 
%%%%%%%%%%%%%%%%%%%%%%%%
  
note that the 4 lines above was not accpted in 7600. does these commands will affect the new config ?i just want to ask before im trying to apply this config to production network?

View 3 Replies View Related

Cisco Switching/Routing :: 2950 Large Time Taken For File Copying

Feb 28, 2012

Our office lan network is in 192.168.0.0/16  with 300 nodes and 30 server .Since its a large broadcast domain some times it takes large time for copying files.How can we avoid this problem with out changing the subnet.Also how to avoid broadcast storm.we are using cisco 2950 series switch.

View 10 Replies View Related

Cisco Switching/Routing :: Copying IOS From Standby To Active Supervisor 4507 Switch

Jun 4, 2012

I was upgrading IOS on 4507 R with dual supervisor.I download the IOS on Active supervisior and did reboot.After reboot i login to switch then i got switch standby prompt.I found that after reboot active supervisior  became standby supervisior.
 
Now new IOS  is on standby supervisior.Need to confirm below..So this means that IOS  does not syn  within the  supervisiors as compared to config  right ?
 
-Which command i can use that will copy IOS from standby supe to Active supe??
 -Which command i can use that will show both active and standby supe with new IOS?
 -Is there any command that i can use to switchover from active to standby supe??

View 3 Replies View Related

Cisco Switching/Routing :: Changing 4510-SUP-6E Redundant Mode To Share-Backplane Mode

Mar 12, 2013

I received the following info from Cisco's TAC and wanted to inquire further before I start reconfiguring the switch:
 
In a redundant Sup-6E setup, the following configuration is supported :
 
- 1 TenGig uplink on Active Sup and 1 TenGig uplink on Standby Sup
- 1 TenGig uplink on Active Sup and 2 Gig uplinks on Standby Sup
- 2 Gig uplinks on Active Sup and 1 TenGig uplink on Standby Sup
- 2 Gig uplink on Active Sup and 2 Gig uplinks on Standby Sup
 
If you invoke shared backplane mode, the following configuration can also be supported:
 
- 2 TenGig uplinks(blocking) on Active Sup and 2 TenGig uplinks on Standby Sup
- 2 TenGig uplink(blocking) on Active Sup and 4 Gig uplinks on Standby Sup
- 4 Gig uplinks on Active Sup and 2 TenGig uplinks(blocking) on Standby Sup
- 4 Gig uplink on Active Sup and 4 Gig uplinks on Standby Sup
 
Here's the command and information about the "shared-backplane" mode :- [URL]
 
Currently, we have 2  SUP 6-Es(Module 5 - Active and Module 6 - Stand-by) setup in a redundent mode. I am planning on changing the redundent mode to the shared backplane mode so I can use 2 TenGig converters to uplink 2 access-switches. We purchased 2 TenGig converters and here is how I am planning on using them:

1- One will be used  to uplink to two 3750 switches(stacked)
2- One will be used to uplink to a 2960 using a Gig SFP
 
My questions are:

1- Do I have to install the 2 TenGig converters(4-Gig Uplinks) in the same Module? Or can I use one one in module 5 and the second one in module 6?
2- Will changing the redundant mode to the shared backplane mode require rebooting the switch or disrupt the funtionality of the other linecards?

View 2 Replies View Related

Cisco Switching/Routing :: Catalyst 3500XL Cannot Get Into The Flash Dir

Apr 22, 2012

I've gotten this out of our storage unit here at work: This was not in use, I've restarted it, I can't get into the flash dir,I've tried to restart the switch via the documents I've gotten on the site.I have the lastest iOS version .bin for this switch, but I can't get this to load: here below is what happens when I try.

View 5 Replies View Related

Cisco Switching/Routing :: SUP720-3B Internal Flash

Dec 1, 2011

I have received a sup720-3B from Cisco with an internal 512MB flash(sup-bootdisk). I want to verify what IOS image is on the disk and do not have an spare 6509 chasis. Can I remove the 512 MB flash disk and insert it to my disk0: on my production 6509 with the sup32 that the 720 will repplace and view what is on the disk without corrupting?

View 7 Replies View Related

Cisco Switching/Routing :: 2801 - Get IOS On Flash Card?

Mar 15, 2012

I have this 2801 in a critical environment.  We had a brief power blip, and even though the router is on UPS, something happened.  Anyway, after working with TAC, they determined the flash card had gone corrupt.  Lucky for me I had a spare 2801 in my office, I grabbed that flash card and plugged it in and we're back up and going.
 
TAC sent me a new flash card.  No matter what I do, I cannot get IOS to load on this thing!  I am stuck in rommon.  Here's what I've tried:
 
tftpdnld in rommon, times out.  using another 2801 as a tftp-server.  doesn't complete. using xmodem.  ugh.  never seems to get started. booting the router with a known good flash card, so I can get to ena, and "copy tftp flash". 
 
have used tftpd32, Solar Winds TFTP server, What's Up Gold TFTP server, and open source tftp from sourceforge.  With the tftp32, it always gets to exactly 73% download and then times out (it says, I have a feeling it's noty really a timeout).  I have tried having the router and tftp server the only devices on a switch, i have tried the router plugged directly into the tftp server with a cross connect cable.  No happiness.  The open source tftp server reported (and I have to paraphrase, I am not near the router) "client does not support block number recount" or something like that.  The client being the 2801. 
 
The iOS file is about 45M.  Someone asked me if the flash card was formatted...would that matter? would the tftp even start if it wasn't?
 
OK, I've gone on long enough.  TAC is dispatching a new card AND 2801! 

View 1 Replies View Related

Cisco Firewall :: PIX 535 - Erase Flash Files From Monitor Mode?

Jun 1, 2010

I have pix 535 and wanted to erase the flash files (faulty) which already utilised 13 mb .so i cant upload new ios so i want erasedisk.bin ,i also have CCO account.

View 6 Replies View Related

Cisco Switching/Routing :: How To Delete A File In Flash On C2600

Sep 1, 2012

I want to delete the first file c2600-i-mz.122-5d in the flash. Not only delete but also reclaim the memory held by deleted file.I followed a link and i ended up with the c2600-i-mz.122-5d marked as deleted in the flash but the memory was not reclaimed.When I restarted the router, it went to ROMMON mode. This is my understanding when router tried to boot from the flash, It tried to load the first file in the flash. Since the file was marked as deleted therefore Router went to ROMMON mode.Now my question is how could I delete the first file and reclaim the memory on 2600 router?

View 8 Replies View Related

Cisco Switching/Routing :: 871 Not Enter ROMmon After Flash Upgrade

Dec 12, 2012

I tired to upgrade the flash memory on my 871. I have tired to send single break and removing the flash card to drop the 871 to rommon.  but no luck, all i get is the below error. I have try restart button on the back and get the same results. How to get the router into rommon mode so i can place the IOS on the flash ?

View 5 Replies View Related

Cisco Switching/Routing :: 4507r / Format Of Flash Caused 100% CPU?

Jul 21, 2012

I had an issue today on a 4507r today where when I formatted the compact flash in slot0: (512mb) it caused the CPU to spike to 100% this took about 1.5 hours and did not cause adjacency loss or any thing, but was worrisome. This was a sup IV  is this normal and should u let it complete like I did?  Also when I copied the os to it from boot flash it caused the same behavior.   I have done this a bunch in 6500 sup 720 without this issue?

View 3 Replies View Related

Cisco Switching/Routing :: 3925 ISR - Possible To Copy Files Between Flash

Jul 9, 2012

I am trying to research the possiblity of backing up IOS and configurations from an Etherswitch module, and being able to store the files onto the Host Router's flash (3925 ISR). and then being able to recover that IOS and configuration, in case I have to replace the Etherswitch Module.

View 4 Replies View Related

Cisco Switching/Routing :: Boot Flash Error On 3524XL

Feb 26, 2012

Every time I delete the directory flash and reinstall it, I get an error:

Error loading "flash:c2950-i6q4l2-mz.121-12c.EA1.bin" 
Error loading "flash:c2950-i6q4l2-mz.121-12c.EA1.bin" Interrupt within 5 seconds to abort boot process. 

That is the message I get. It's set to NO manual boot, but it keeps making me manually boot it. I am at a loss, I've done 3 switches and they all keep doing the same thing.

View 6 Replies View Related

Cisco Switching/Routing :: Download IOS To Flash In Switch Catalyst 2960?

Jan 23, 2013

In a switch catalyst 2960 the IOS is erasing in flash, for the transfer IOs respalding to flash no function the current command. how is the method.

View 6 Replies View Related

Cisco Switching/Routing :: Catalyst 2960S Format Flash Failure?

Jan 3, 2013

I recently tried to manually format the flash on a model WS-2960S-48TS-L switch running IOS version 15.0(2)SE.  While executing the operation I got the following error - mifs[8]: Failed to create superblock  %Error formatting flash (I/O error).As a result the flash is no longer accessible by the switch.  I spoke with Cisco and they indicated that a switch reload would remount the flash and make it accessable again but the .bin file would need to be reloaded using the xModem recovery procedure (what a pain).The next IOS version 15.0(2)SE1 will supposedly fix this bug but it has not been released yet.  In the meantime if you are running 15.0(2)SE you may want to hold off performing a "format flash:" function on a 2960S.

View 3 Replies View Related

Cisco Switching/Routing :: Can C3560-24PS Switch With 32 MB Flash Be Loaded With IOS 15

Jul 23, 2012

Can a C3560-24PS switch with 32 MB flash be loaded with IOS 15? Will it be able to execute the code and function properly?

View 2 Replies View Related

Cisco Switching/Routing :: 3500XL Switch - Does Not Load Flash Or Boots

Dec 8, 2011

Base ethernet MAC Address: 00:0a:b7:07:35:80Xmodem file system is available. The system has been interrupted prior to initializing theflash filesystem.  The following commands will initialize the flash filesystem, and finish loading the operating system software:  

flash_init    load_helper    boot switch: flash_initInitializing Flash...flashfs[0]: 3 files, 1 directoriesflashfs[0]: 0 orphaned files, 0 orphaned directoriesflashfs[0]: Total bytes: 3612672flashfs[0]: Bytes used: 1815040flashfs[0]: Bytes available: 1797632flashfs[0]: flashfs fsck took 3 seconds....done Initializing Flash.Boot Sector Filesystem (bs:) installed, fsid: 3Parameter Block Filesystem (pb:) installed, fsid: 4ô

View 1 Replies View Related

Cisco Switching/Routing :: 6509-E Compact Flash Internal Vs External

Oct 27, 2011

6509-E compact flash Internal vs External

View 1 Replies View Related

Cisco Switching/Routing :: 2811 IOS File Not Appearing On Flash Drive

Oct 6, 2010

I'm having an issue with a Cisco 2811 ISR Router. Sh ver command output lists the correct ios that the router used for booting and it says that the ios is stored in flash but when i give "sh flash" command it doesn't display the ios file. Maybe the flash is corrupted or damaged in some way? In the attached file is the output from the "sh ver" and "sh flash" commands.

View 6 Replies View Related

Cisco Switching/Routing :: 1760 Crash Info Not Recovers At Flash

Aug 10, 2012

Got a problem with my 1760 router. Bought it from ebay and booted it on today and got this error,It has 180224K/16384K bytes of memory and 2 paritions of 32768K flash.I erased both partitions and put a different version of the IOS on (still 12.4) and there is no difference, still get the errors.These aren't on any of my other 1760 routers so I assume they are linked to the problem.

View 3 Replies View Related

Cisco Switching/Routing :: 2960 - Upgrade IOS Because Flash Is Enough For Upload File

Jun 27, 2012

I want upgrade my switches 2960-24PC-L RAM: 128MB and Flash: 28MB, but in the web page of cisco I see that the requirement of hardware is RAM: 128MB and Flash: 32MB.
 
I download the IOS file and this file is only 11.2MB so my question is if I can upgrade the IOS because my flash is enough for upload the IOS file.

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved