Cisco Switching/Routing :: 38XX Router Replacement To Support ATM / IMA?
Feb 20, 2013What is a good replacement for the 28XX / 38XX router that will support ATM/IMA?
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: Replacement Of Netgear FVX538v2 With Router 29xx?
Jul 31, 2012as my Netgear FVX538v2 router recently died I would like to replace this router by an enhanceable Cisco product. I'm thinking of a Cisco 2901 model that will be connected to the cable modem of my ISP and has to support PPPoE over the WAN port. The Cisco router should provide the following physical interfaces:
+ 2 WAN ports (10/100/1000 Mbps, RJ-45)
+ 8 LAN ports (10/100/1000 Mbps, RJ-45)
+ Serial Port for terminal program access
+ other options the FVX538v2 does provide
Will a Cisco Router 2901 be sufficient to replace a Netgear FVX538v2 device? What modules do I have to purchase?What additional licenses (data, UC, Sec?) do I have to pay for?
Cisco Switching/Routing :: Recommendations For A 3508-XL Fiber Switch Replacement
May 22, 2013This is an easy question for all the architechs and designers out there. I have a stack of 3508-XL switches and one of them failed. we have 2 spares but hese are more than 10 years old and have reaced EoL.What is the equivalent switch of a 3508-xl replacement today?
View 11 Replies View RelatedCisco Switching/Routing :: Old WS-C3750G-48TS Works With New Replacement (WS-C3750X-48T-E)
Aug 12, 2012Situation: Currently WS-C3750G-48TS-(S or E) switches are on stack. Now these units will soon EOL on Jan. 30, 2013 and Cisco recommends that
WS-C3750X-48T-S or WS-C3750X-48T-E will be used.
The question is: Will the new SKU works together in a stack with the old ones? Will there be no changes on the type of stacking cable to be used?
Cisco Switching/Routing :: Obtain Replacement Rackmount Kit For 2960 48 Port Switch?
Dec 1, 2012Is it possible to obtain a replacement rackmount kit for a 2960 48 port switch? I've had a read of the manuals but can't see a part number specified. The part number suggested to me (by BT) is for the 8 port version, which is not much use.
View 2 Replies View RelatedCisco Switching/Routing :: Vlan Support For 1721 Modular Router
Jan 15, 2012I would like to know can we configure vlans with cisco 1721 Modular Router? Is it Possible to configure lan environment with the vlans configured in 1721 router without a managed switch?
View 9 Replies View RelatedCisco Switching/Routing :: How Many Route Entries 2821 Or 881 Router Can Support
May 21, 2012One of our client wants to know "How many route entries a 2821 router or 881 router can support" Such as the 3750 can support 11k routes in ‘desktop routing’ mode. But I want to know the limitations on routers.
View 1 Replies View RelatedCisco Switching/Routing :: Possible To1941 Security Bundle Router Support Minimum Of 2k Of VLAN ID
Dec 17, 2012Is it possible to cisco 1941 security bundle router Support minimum of 2k of VLANs ID and shall support upto 60 vlans?
View 4 Replies View RelatedCisco Switching/Routing :: Nexus 7010 / VSS - Does It Support Virtual Switching?
Apr 9, 2010Does the nexus 7010 support virtual switching yet? All of the posts I have found from about a year ago say that it is going to be supported, but there were no dates listed. I heard the same thing from Cisco a while back, but haven't followed up with it.If it is supported finally are there any configuration guides available for it?
View 7 Replies View RelatedCisco Switching/Routing :: Does Catalyst 3550 Support Inter Vlan Routing
Jul 24, 2007Does Catalyst 3550 switch support inter vlan routing ?
View 12 Replies View RelatedCisco Switching/Routing :: Nexus 5010 Support For Inter VLan Routing
Jan 10, 2012Can nexus 5010 supports inter v lan routing , as there is no core switch and router available in current network.
View 2 Replies View RelatedCisco Switching/Routing :: 2960 Switch Support IP Routing?
Nov 16, 2011Does the Model "WS-C2960-24PC-L" Supports IP Routing or not?
View 9 Replies View RelatedCisco Switching/Routing :: Does 877 Support Vlan
Jan 28, 2012Coincidentally when i tried to configure router 877 as an adsl router i found that a vlan configuration is included. my question is what is the benefit of using vlans in router ??? i studied that we use it in switches for the purpose of network enhancment from broadcasts and netwrok segmentation. why we use vlans in routers ?
View 9 Replies View RelatedCisco Switching/Routing :: Does 4500 Support VSS?
Feb 28, 2012Does the 4500 support VSS (Virtual Switching System) ? On the official product overview page it says: 1.6 Terabits capacity with Virtual Switching System (hardware-ready)What means Hardware ready ? Does it mean that it supports VSS in the same manner as the 6500 ? The reason I'm asking this question is that I didn't find any info on the Internet about this. We would like to upgrade our network by interconnecting the 2 sites with Layer 2 redundant links (Layer 2 extension), but I'd like to use the both links in a load-balancing manner, which can be a real pain in the *** with STP. The choice is between 4500 and 3750 stackable core switches. The 6500s are very expensive.
View 6 Replies View RelatedCisco Switching/Routing :: Does 887 Support SIP Forwarding
Mar 26, 2013Does this Router Support SIP Forwarding?
View 1 Replies View RelatedCisco Switching/Routing :: VSS Support On Cat 4500x
May 23, 2012when the VSS will be supported on Catalyst Supervisor Engine 7-E or 7-LE and on Catalyst 4500-X?And does VSS will require Enterprise license ? or the IP base will be enaugh?
View 7 Replies View RelatedCisco Switching/Routing :: 3560G - PBR Support
Feb 2, 2012 I have a 3560G switch with c3560-advipservicesk9-mz.122-46.SE and 2 routers. The switch has vlans defined. I want to route all traffic on vlan 25 out of one of the routers exclusively. Here is what I have attempted:
-Set the SDM template to routing & reload
-Define an access-list for the v lan traffic
-Define the route-map
-Apply the route-map to the vlan interface
When I attempt the last step I receive the following syslog error:
%PLATFORM_PBR-3-UNSUPPORTED_RMAP: Route-map RM_IMDGuest not supported for Policy-Based Routing
Also, the route-map is removed from the vlan interface after this error is thrown. Im 99% confident that PBR is supported on this switch (am I wrong?). Here is the relevant show output:...
access-list 125 permit ip 192.168.25.0 0.0.0.255 any
route-map RM_IMDGuest permit 10
match ip address 125
set ip next-hop 192.168.5.3
[code]....
Cisco Switching/Routing :: ME 3400 - VTP Support
Sep 13, 2010We purchased ME 3400 switch and trying to implement it. But its quite surprising in the ME3400 configuration guide that the switch does not support VTP. When I checked in Feature navigator under feature "VTP" i could see ME3400 supports VTP. But when i get into CLI of ME3400, i am not getting any option of configuring VTP. I could see in some sites VMPS is supported in ME3400.
I would like to confirm the following:
1. Does VTP support present in ME3400 or not? If not, what would be the reason that it is not included in ME3400.
2. If not what is the alternative.
Network is already running VTP of around 30 switches.
Cisco Switching/Routing :: FCoE Support On Nexus 7k
Feb 24, 2013Its required that all ports on nexus 7k should be user configurable as either 1G/10G/FcoE. Which module do i need in this case ?
View 0 Replies View RelatedCisco Switching/Routing :: Catalyst 3560 With GRE Support
Feb 7, 2012Does the Catalyst 3560 support GRE ?
I know that Catalyst 3750X support GRE ,but Catalyst 3750X cannot work in hardware it.
Does the Catalyst 3560 cannot work in hardware too?
Cisco Switching/Routing :: SG200-50 - Does It Have Support For SNMP?
Jul 4, 2012Does Cisco SG200-50 50 port gigabit smart switch have support for SNMP ? I have updated the firmware and still can not find any option for snmp.Sent from Cisco Technical Support iPad App.
View 3 Replies View RelatedCisco Switching/Routing :: Does WS-C3750X-24S-S Support GLBP
Dec 28, 2011I would like to ask you that switch WS-C3750x-24S-S can support with GLBP?i have IOS version : S375xvk9t-12258SE.
View 2 Replies View RelatedCisco Switching/Routing :: IOS For Support Of OSPF And BGP In 6509-E
Sep 13, 2012If i look at the Feature Navigator , it says that IP Base Supports OSPF and EIGRP. But if i look at the Cisco Link it contradicts the Cisco Feature Navigator.
[URL]
if I have 6509-E with VSS-SUP720-10G and want to run OSPF and BGP on the Switch. What is the IOS i require? WIll IP Base Suffice or i need to take Advance or Enterprise Image.
Cisco Switching/Routing :: Does LAN Base IOS Support SSO In L2 4507?
Apr 26, 2012We will deploy several 4507 with 2xsup7 as a L2 access switches for our office.Does LAN_Base IOS version support SSO or we need purchase IP_Base IOS (L3)?
View 1 Replies View RelatedCisco Switching/Routing :: 3560X Or 3750X Support GRE?
May 23, 2013If the 3560 or 3750 "X" series support GRE.I am pretty certain the older 3750-E does not support GRE (both in hardware and software)Was hoping the new super duper X series do. If not, it could get expensive
View 5 Replies View RelatedCisco Switching/Routing :: ME3600 Does Not Support Rstp
Apr 24, 2013i have some ME-3600x. some of version 12.2 and one of version 15.5. te last one hast same config as all other. but if i check for rstp it sends.i know abount global config commands:
-spanning-tree mode rapid-pvst
-spanning-tree extend system-id
but there is no spanning-tree support. this causes many more problems. so it is important to solve spanning tee at first.is it possible without downgrading this device?
Cisco Switching/Routing :: Does 3750 Support New ASN Format
Sep 17, 2012I have a 3750 running 12.2(55) and when I configure BGP I only get the standard AS number choice of 1-65535, but my provider is supplying a 4-byte AS number which is six digits and it gets rejected at the prompt on the 3750. Does that mean no support on 3750
View 1 Replies View RelatedCisco Switching/Routing :: Can RPS2300 Support 2960S
Aug 18, 2012When using dynamic configuration tools, if I choose 2960 (not 2960s), I have the option to choose RPS2300 as redundant power, but when I choose 2960s, I cannot choose RPS2300. However, in a document describe both 2960 and 2960s, it said that RPS2300 can be used. Does RPS2300 support 2960S?
View 1 Replies View RelatedCisco Switching/Routing :: Switch WS-C3524-XL Support 802.1x?
Mar 15, 2012The switch ws-c3524-XL with c3500xl-c3h2s-mz.120-5.WC17.bin not support the command dot1x?
I ask that because i´m unable to write this command: aaa authentication dot1x default group radius
And enable 802.1X authentication on the interface with this command: dot1x port-control auto
Cisco Switching/Routing :: SRP547 Does Not Seem To Have Proper 802.1Q Support
Jan 19, 2013I am looking for a router to route between VLANs on a Cisco Small Business 300 Series 10-port Gigabit Managed Switch.The router needs to support 802.1Q and also have Gigabit ports.I have been looking at the Cisco small business RV series of routers but most of these seem like Wireless routers and I don't know if these will act as proper routers.I already have a Cisco SRP547 and this does not seem to have proper 802.1Q support.
View 12 Replies View RelatedCisco Switching/Routing :: Does WS-X4748-RJ45-E Support The 802.1x
Nov 10, 2011this module WS-X4748-RJ45-E able to support 802.1x?
View 1 Replies View RelatedCisco Switching/Routing :: HWIC-4T1/E1 Support On A 2811?
Oct 31, 2010[URL]The Cisco 2811 does not support the HWIC-4T1/E1 module. But, I installed HWIC-4T1/E1 on the 2811 running 124-24.T2.
View 3 Replies View RelatedCisco Switching/Routing :: C7200 IOS Does Not Support CBWFQ
Jul 6, 2012I have a C7200 router which does not support full feature CBWFQ. There are no option to configure following commands:
class-map match-any voice
match protocol rtp
match ip dscp ef
[Code].....