Cisco Switching/Routing :: C2801 Not Booting Up Completely
Nov 17, 2012
Yesterday a coleagu accdently removed the CF card from the router now the router does no longer want to boot completely. It extracts the image from the CF card but when it has to initialize the configuration it stucks there for hours. Can it be that the startup config is somehow corrupted?
When i try to tftpdnld is says that the mac address is illegal.
The first line of the cookie looks like 04 ff 08 86 ff ff ff ff ff ff ff ff ff ff ff ff
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)Technical Support: [URL], Inc.PLD version 0x10GIO ASIC version 0x127c2801 platform with 196608 Kbytes of main
[Code]......
View 7 Replies
ADVERTISEMENT
Aug 13, 2012
i facing problem with my switch cisco 3560G, when it power on only System light is green and noting happen. i check with serial cable ( Console) but noting happen no booting.
View 2 Replies
View Related
Feb 3, 2012
I have a 6500 that keeps booting into Rommon, even though it has a valid image file on the sup-bootdisk, and the config register is 0x2102. When it reloads I see this on the screen: [code] It seems like the repeating error is "error - on read during ELF program load". I can boot the system off of a CF card, but I'd like to use the sup-bootdisk.
View 11 Replies
View Related
Apr 7, 2012
Yesterday I've faced a Problem that is not letting me boot with the new IOS.
Actually I'm planning upgrade IOS which supports SSH. As part of plan I've downloaded the new IOS image and uploaded via TFTP server to the switch.
After uploading to the switch. I've verified image and MD5 hash also. Everthing is fine. Then after I set the boot variable for the newly uploaded Image.
When I'm rebooting the Device it is not taking the new IOS. It's booting with the OLD image. Even It's not showing any error message while rebooting (ACTIVITY FILE ATTACHED FOR YOUR REFERENCE) I can't take risk by deleting the old IOS.
View 1 Replies
View Related
Nov 3, 2012
I tried to upgrade the IOS on my internal AP and now I am in a reboot cycle. I have tried to manually boot the old and new IOS images from the rommon but neither are working. here is the output I am getting:
ap: dir flash:
Directory of flash:/
2 -rwx 6563840 <date> ap801-k9w7-tar.124-21a.JY.tar
4 drwx 256 <date> ap801-k9w7-mx.124-21a.JA1
152 -rwx 548 <date> env_vars
153 -rwx 2775 <date> cpconfig-ap801.cfg
154 -rwx 2775 <date> back_up.txt
155 -rwx 3763 <date> config.txt
[code]....
View 2 Replies
View Related
Aug 11, 2012
I'm having an issue with 2 of my 3560s which are not booting. The last thing I did on both switches before it hangs was:
>write erase
>reload
restarted as normal
[Code]....
I've tried powering-off the switch and pressing the Mode button and power on. I got to swtch: mode switch:reset
It restarted past the POST but just hang halfway at the same bootp-up process as shown on the attached. The SYST LED is Green color when it hangs.
View 9 Replies
View Related
Oct 25, 2012
I bought a CISCO SG200-18 switch. I added the Switch to my LAN and started the Switch (as described in the manual). The Switch starts the booting procedure (green blinking status LED) After a while, the LED starts to blink orange and green, instead of steady green.
In generally the Switch seems to work. I can access my whole network, but not the web interface of the switch itself. I also can't see the switch in the ADSL / DHCP rooter.
I also tried to boot the switch only connected to the PC. But ping on 192.198.1.254 is not working. The switch is in the same subnet like my other LAN components.
Subnetzmaske . . . . . . . . . . : 255.255.255.0
Standardgateway . . . . . . . . . : 192.168.1.1
I exchanged the switch. But the new switch shows the same behavior.
View 3 Replies
View Related
Aug 22, 2012
I have a new cisco 1941 router that I am setting up with pxe-booting. I have never setup pxebooting before and i have this setup so far ip dhcp pool Admin
-option 66 ip 192.168.1.4
-option 67 ascii pxelinux.0
and i can pull an ip but it keeps getting hung up when it comes to the TFTP part.
View 4 Replies
View Related
Jul 3, 2012
An ASA 5505. Device boots to rommon #0> and stays there. The complete boot record follows:
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45
Low Memory: 632 KB
High Memory: 507 MB
[Code]....
View 15 Replies
View Related
Mar 3, 2013
I have a brand new 3650x switch that I was configuring via console and left it on overnight; this was friday night ( I forgot to keep the air conditioner on). When I returned Sunday afternoon and checked the switch I realized that the SYS and STAT lights on the front were not on, however the Leds on the PS module were still on. I powered it down and turn it on again but still there are no lights on the front. The PS OK and AC OK leds on the PS module are on but I noticed the leds on the two fan modules are not green or even amber; they are off.When I first turned on the switch I remembered distinctly that there were loud noice and if all fans were in overdrive mode for a few seconds then the went to normal. I'm not gettgin this loud noise phenomenom.
View 9 Replies
View Related
Oct 24, 2012
i am facing time daely issues on cisco 2960 s series switch while booting .It is taking time for electing masrer and sleeve for stacking.can i disable the election process for stcking while booting.
View 4 Replies
View Related
Jul 23, 2012
One of the 6500 was going in bootrom mode, so I have formated the flash disk using the other Cisco 6500 switch and copied IOS file to the boot disk. But the 6500 booting failed.
View 6 Replies
View Related
Feb 29, 2012
today I received a Cisco 1841 Router with a problem i have never seen before. Maybe this my 1st really,really broken Cisco Router. When I power the Router on, the fan and all lights turn on (green) and that's it. Nothing changes, also after minutes of wating. On console i don't get any messages and I already tried every BAUD rate possible. Switched the router off/on again and again. And no, it's obviously not a console problem of my computer, because i tried with different routers.
View 3 Replies
View Related
Dec 5, 2011
I have a 4507R with a WS-X4515 supervisor V. It was booting into rommon mode, so I attempted to boot to an IOS image from TFTP. The boot process hangs at at the end of the below output and the then the status light blinks orange. I left it sit like this overnight, and it remained the same.
rommon 23 >boot tftp://x.x.x.x/cat4500-entservicesk9-mz.122-53.SG2.bin
Tftp Session details are ....
Filename : /cat4500-entservicesk9-mz.122-53.SG2.bin
[Code]......
View 9 Replies
View Related
Jul 7, 2012
One of my customer had a problem with A/C and the room temperature reached almost 50 C. We came to the site and saved the configuration, took a backup and shutdown the switch.
After the A/C problem is resolved, we tried to power-on the switch .. and we found that it is going to the rommon.
I put "boot" command to boot from the bootdisk, but I am getting the following error:
Code...
I tried to search it, But it is resulting in that most probably it is a hardware failure on the SUP.
View 6 Replies
View Related
Jul 17, 2012
I have 2950 switch booting through MOnitor Mode.Analyzed there is no Cisco IOS image in flash.
View 1 Replies
View Related
Dec 12, 2012
I have a Catalyst 4506e that works fine but if reload, it boots in rommon mode. I can start it with a boot command, but by default, i must type a command. My config-register is 0x2102.
View 5 Replies
View Related
Feb 28, 2012
I have a cisco 7606-S with dual RSP720-3CXL. Devices reloaded and now none of the RSPs are booting.When I have tried to take the console using only one RSP, card going to rommon mode after that it hangs. I guess its firmware is corrupted.
View 4 Replies
View Related
Feb 25, 2012
Currently I have C2801 with 256MB of memory and 64MB of flash. I want to upgrade it to 384MB / 128MB.Do I need to get MEM2801-256D or I can use any PC133 SDRAM (144PIN) for memory? 384 is maximum I can install? Do I need to get MEM1800-128CF or I can use any compant flash card? 128MB is maximum I can install? (I saw 256MB flash on for C2801)
View 10 Replies
View Related
Jan 25, 2013
I have 3750x with existing small business server and all computers on one vlan. This vlan connects to other switches with fibre trunk sfp's.I want build a new forest utilising vlans in the normal way, what is the easiest way to segregate this vlan?The site is running 24/7.
View 6 Replies
View Related
Jan 17, 2013
We are running ACS 4.1 on Windows 2003 server. The disk filled completely up with years of log files. We have freed up space but now none of the services will start back up either automatically or manually.
View 4 Replies
View Related
Jun 13, 2012
After an upgrade from LMS 4.2 to 4.2.1 Legacy menu is completely empty. Is it a bug? If it's empty, how to get to some of DFM options (like rediscovery, discovery status etc.) They seem not present in "Site map".
View 4 Replies
View Related
Mar 11, 2011
Is there any way to add a printer to my computer that is on a completely different network? It's a small residential setup on both ends.
View 2 Replies
View Related
Sep 13, 2011
For quite some time now my parents' wireless internet cannot seem to keep a wireless signal anywhere in the house unless you are sitting next to the router. I've been doing everything I know to try and keep the signal strong enough to use it down the hall in the living room.
I've tried using different frequencies and channels however this only seems to work for an hour then the network will fall off the network list entirely and then a few minutes later will pop back in. What is causing this signal to die out completely every few minutes? They've tried countless numbers of wireless routers in hopes it would fix the problem however this never seems to work. Is this an issue with the ISP and/or the modem they provide us? Wired connections work fine, just wireless connections refuse to either stay up or constantly disconnect the user from the network.
View 5 Replies
View Related
Sep 11, 2011
I currently own a Sony Vaio Laptop that has been working fine for the last 2 years, I was happily on facebook when all of a sudden, my laptop started lagging massively and it disconnected me from wifi, I was shocked to find that when I tried reconnecting, the laptop decided to stop working for a second and my wifi stopped working completely, every time I disconnect the Ethernet cable from my laptop even though my wireless switch is on, it won't even pick up my Virgin Media superhub I have about 5 meters from my laptop, it indicates that there is NO wifi anywhere, just the ascending bars with a big red X on it
View 1 Replies
View Related
Mar 17, 2012
I am getting wireless signal in every room except one of the bedrooms.I have upgraded to a better router Buffalo N450 AND added a wireless USB on to laptop.Here is the weird thing.I have 100% signal strength all the way to the bedroom door. One step inside signal drops to 20%, further inside it can get to Zero BUT if I just take ONE step into the bathroom which is in the bedroom.. signal goes back up to 100%... one step either way goes from 100 to Zero... What the heck?I live in an Apartment building.. What could possibly be upstairs or in the roof thats only blocking signals in this one room!
View 1 Replies
View Related
May 13, 2011
I had a network connection to the main family computer that just completely disappeared after I got back on it. It had been on all day because it was defragmenting, but a few minutes after I got back on it (I had just sat down in the chair and sent a couple messages on a chat I was in and dismissed an "Oh, Windows Media player found another WMP on main computer! Wooo!" notification) and then it was gone.
I assumed the internet had crashed so I gave it a couple hours, no internet. I stayed up longer waiting, writing, playing some games, but nothing. I didn't check the Network computers thing until now.
Usually even when the internet crashes the main computer still shows up in the computer list but it was just mine then. It seems like it totally dropped the connection and it can't find it again when I try to create a new one. It's not like I watch p~rn or download anything I'm not supposed to download so...
And the network icon doesn't have a big red no connection at all x - It's just the two computers, no world icon, no x. I've tried booting in safe mode with networking, nothing, 'netsh winsock reset catalog' + 'netsh int ip reset.log, nothing, create new connection, nothing, and repair memory problems, nothing. : Microsoft Security Essentials found no viruses after a full scan, and it had been updated hours before the internet had a tantrum. I recently uninstalled Malwarebytes because according to a friend its update crashed her computer so I have no other virus scanner to use.
Oh, I'm runnning a Windows Vista Home Premium. Mine is genuine, it came with the computer, but my father had the bright idea to use -my- Vista disc to install it on the main PC, so it's all 'rawr not genuine' though as far as I know, my father's W7 laptop is still running just dandy.
We use a D'Link router, and it's worked fine until now. I don't actually know how my computer is connected, I'm pretty sure it's hardwired to the modem or router, but my father's is wireless. I've been searching like mad for the router's wireless USB thing, but it seems to have walked out the door.
View 8 Replies
View Related
Mar 7, 2013
My Network is gone from my list of available networks on my MacBook. I use s NETGEAR router, my network name is simply "NETGEAR" i have never named it anything else since installing this over 4 years ago. I have unplugged the power cord, waiting several minutes before plugging it back in. Also tried unplugging both the cable and the power cord. The router has no small "pin hole" that i can see in order for me to try to re-set it this way. It has literally disappeared from my Mac. Do i need to re-install using my NETGEAR cd?
View 2 Replies
View Related
Mar 12, 2012
-No hardware profiles on "change adapter setting."-Network Adapter isn't shown in Device Manager.-Reinstalled windows 7 and problem still persist.
View 4 Replies
View Related
Mar 20, 2011
Roadrunner plugged directly into my computer:
Ping: 29ms
Download Speed: 22.16 mbps
Upload Speed: .85 mbps
Roadrunner through my WRT320N, whether wireless or plugged into my computer(s)
Ping: 850-1400ms
Download Speed: .09 mbps - .25 mbps
Upload speed: .04-.06 mbps
Occasionally I get passable speeds in the 6 mbps range for download speed, but lately the router has performed this way nearly all the time.I've tried reflashing the firmware. I've tried multiple combinations of suggestions, ranging from adjusting single frequencies to adjusting MTU size, etc. Nothing works. This router simply CANNOT be this bad.
View 4 Replies
View Related
Jan 18, 2013
I tried to reboot manually and I changed the slot but the same behavior:
%SYS-SP-3-LOGGER_FLUSHING: Systema pausing to ensure console debugging output
%OIR-SP-6-CONSOLE: Changin console ownership to route processor
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x430213e4
PC = 0x4038c124, Cause = 0x1020, Status Reg = 0x34008102
View 1 Replies
View Related
Aug 15, 2012
I'm an architect working in a small office that happens to be home to two seperate businesses, each with their owner network. However, these two networks want to use the same large format printer. I recently purchased the RV180W since the Cisco representative told me i would be able to connect both networks to the router so they can both see the printer without seeing the files on each of the other networks. We simply want to share the same printer.
Network 1:
192.168.4.1
Network 2
192.168.2.1
Large Format Printer
192.168.4.151
Network 1 has the RV180W as it's router with three gigabit switches. Computers and peripherals are connected to the three switches. 1 port open on the last switch.
I want to configure the RV180W to see both 192.168.4.1 and 192.168.2.1
What settings need to be modifed in order to accomplish this? Do I need more equipment? Is it easier to put a wireless card in one of the computers on the 192.168.2.1 network and then set it to see the 192.168.4.1 network?
View 3 Replies
View Related
Dec 13, 2011
how can I completely disable DHCP on SR520-FE?
View 8 Replies
View Related
