Cisco Switching/Routing :: WS-4500X-32 Support For TrustSec MACsec Encryption
Apr 10, 2013When will the WS-4500X-32 support the TrustSec MACsec Encryption ?
View 1 Replies
ADVERTISEMENT
Cisco Switching/Routing :: VSS Support On Cat 4500x
May 23, 2012when the VSS will be supported on Catalyst Supervisor Engine 7-E or 7-LE and on Catalyst 4500-X?And does VSS will require Enterprise license ? or the IP base will be enaugh?
View 7 Replies View RelatedCisco Switching/Routing :: 4500X - Per Port MTU Support
Dec 2, 2012Does the new 4500X series will support a per port MTU?
View 2 Replies View RelatedCisco Security :: 3560 - Configure Encryption With MACsec Switch To Switch?
Jun 28, 2012I have a problem, i would like todo MACSEC betwwen two switches cisco catalyst 3560-x but I know that for this operation i needed ACS server 5.1 is it possible to encryp dataflow without ACS server and if you have the configuration
View 7 Replies View RelatedCisco Switching/Routing :: 3750x Implementing Macsec Between Two Switches
Aug 19, 2012Can I implement MACsec betwen two Cisoc 3750X using the C3KX-NM-1G? 3750x (C3KX-NM-1G) -------------------MMF------------------(C3KX-NM-1G) 3750x.
View 1 Replies View RelatedCisco Switching/Routing :: Use 3750X At Each Location And Configure Macsec?
Feb 21, 2013Service Provider will config a Q-n-Q connection between (2) datacenters. I would like the traffic encrypted over that connection.
Could I use a 3750X at each location and configure Macsec?
Cisco Switching/Routing :: VSS With 4500X
May 5, 2013Can I have three 4500X in VSS? or is the limit two? Do I need a different license or a specific IOS?
View 1 Replies View RelatedCisco Switching/Routing :: 4500X IOS XE Commands
Jan 31, 2013We are replacing two 3750E switches with 4500X using cat4500e-universalk9.SPA.03.03.02.SG.15111.GS2
1. is there a command reference available for this ios - can't seem to find out
2. Im using GLC-T gbics and we normally would set the speed to either 100 or 1000 now that option does not seem to be available.
3. when I entered username etc. I got a message " CLI deprecated soon".
Cisco Switching/Routing :: DWDM SFP With 4500x
Jan 25, 2013Are there any plans to allow DWDM SFP+ on new 4500x ? If so, how soon?
View 2 Replies View RelatedCisco Switching/Routing :: SSH Commands Not Available In 4500x Switch?
Oct 6, 2012We have a 4500x Switch in this ssh commands are not available.its running on (cat4500e- UNIVERSAL-M), Version 03.03.00.SG) IOS XE.
View 2 Replies View RelatedCisco Switching/Routing :: 4500x - Twin Gig Converter
Feb 21, 2013As defined in datasheet, 4500x switch supports 10 GE. Can i use twin gig converter to convert some ports to 1 GE ?
View 1 Replies View RelatedCisco Switching/Routing :: How To Configure 4500X With GLC-T SFP To Work At 100M
Jan 31, 2013How to configure a 4500X with a GLC-T SFP so that it will work at 100M.The data sheets say it will work at 10/100/1000 but Im not seeing that happen can't set the speed and it doesn't negotiate with anything at 100M it will only work with auto to another switch set to auto and supports 1000M.
View 6 Replies View RelatedCisco Switching/Routing :: How To Deploy 1 Gigabit In Catalyst 4500X
Apr 7, 2013im currenly configuring a 4500X with 16 port. All sfp are 1Gig, but when I input show ip int brief, it shows that the interfaces are on 10 Gig. Does Catalyst 4500X already support the 1Gig SFP without inputting a command or do I have to configure it to activate the 1Gig interface?
View 6 Replies View RelatedCisco Switching/Routing :: Catalyst 4500X All Ports Gigabit
Jun 4, 2012Are all ports on Catalyst 4500X Gigabit/10-Gigabit or just the ports on 8-port module. We are looking at 4500X for campus distribution layer but need Gig ports to access switches for now and may year from now will be using 10G.
View 7 Replies View RelatedCisco Switching/Routing :: Management IP On 4500X When VLAN Gateway Is A SVI?
Dec 5, 2012I'm trying to figure out how to (or if I can) setup the management interfaces (fa1) on a couple of new 4500X switches. My issue is that the 4500X's themselves are the gateway for my management VLAN (.1 HSRP virtual, .2 and .3 SVIs on the pair of switches).
I would like to assign addresses from the management VLAN to the router Fa1 management interfaces but the software configuration guide seems to note this is not supported (and indeed it doesn't seem to work).
Physically I have Fa1 from core-1 into a port on an adjacent switch. Fa1 from core-2 also goes into a port on that adjacent switch. Both are in my management VLAN, whose SVIs are on the cores themselves.
Cisco Switching/Routing :: 4500X VSS - Dual Active Detection With EPAgP
May 24, 2013I am interesting if 3560x supports ePAgP. I have VSS which is formed by two 4500x switches. Can I use 3560x, which is connected two both VSS members via 10Gb optics for Dual Active detection ?
View 2 Replies View RelatedCisco Switching/Routing :: 4500X EtherChannel Symmetric Load Balancing
May 8, 2013I have probem with symmetric load balancig, in case when both ends of ether channel are on the sam switch (we are using VLAN translation).We need to create L2 port channel with both ends on same switch (Cisco WS-C4500X-24X-ES), for example:Po1 – Gi0/1, Gi0/3 (one end of port channel )Po2 – Gi0/2, Gi0/4 (other end of port channel)On ports in Po2 we will configure VLAN mapping.My question is what is the best ether-channel load-balancing scheme with wich we can accomplish full symmetry in both directions? For example, if traffic in one direction goes through Gi0/1 (member of Po1), in other direction also must go through Gi0/1. This is required because we need to connect four appliances for DPI (they are full L2 transparent) and traffic through each appliance need to be symmetric.
I can set-up src-ip, dst-ip, src-dst-ip etc. load balancing, but, actually I need src-ip on Po1 and dst-ip on Po2. Is there any way to set up different load balancing mechanism for different ether channel on same switch (4500X).
Cisco Switching/Routing :: How To Setup Traffic Shaping On 4500X Outbound Port To WAN Routers
Mar 26, 2013We have some ASR WAN routers which have a dedicated 400M interface to a remote site.
Servers on our Local network source the data through some firewalls via 10G interfaces, which connects to 4500X WAN switches then to the Routers on 1G links.
The sources are rate limiting the traffic but the routers are periodically dropping packets which I think is mostly due to burstiness in the traffic between as it traverses through from 10G links to 1G then to 400M.
How to setup traffic shaping on the 4500X outbound port to our WAN routers.I'd like to see if we could buffer and smoothe out the traffic as it exits the 4500X WAN switch 1G port to the WAN Routers.
Cisco Switching/Routing :: Calculating 4500X Power Consumption Requirements To Select Appropriate UPS Systems
Jun 2, 2013I am calculating Cisco 4500X power consumption requirements to select appropriate UPS systems. I have 4500X switch with dual power supplies.which value should I take for power consumption calculation, in data sheet it has two values: AC Power Max Rating: 750W System Power Consumption: 330W nominal/400W max
Which values should I take, to calculate UPS systems capacity? And also I am interesting when 4500x has two power supplies what is power consumption?
Cisco :: Does Aironet 1142n Support WPA-PSK With AES Encryption
Jun 19, 2011Does Cisco 1142n Aironet Access Point support WPA-PSK with AES encryption ?
View 1 Replies View RelatedLinksys Wireless Adapters :: Does WUSB11 Support WPA Encryption
Apr 8, 2007Does the WUSB11 adapter support WPA encryption?
View 2 Replies View RelatedCisco Switching/Routing :: Encryption Module For 3845
Jun 25, 2012Can the encryption module (DES/ 3DES/AES/SSL VPN Encrytion/compression) for Cisco Router 3845 able to support the external connection from other high end router, for example cisco 7200? What is the maximum bandwidth, load and concurrent connection it can support?
View 1 Replies View RelatedCisco Switching/Routing :: Esp-aes 256 - Effects Of Encryption On Bandwidth
Aug 22, 2012will encrypting traffic: esp-aes 256 esp-sha-hmac across a WAN circuit drop a nics performance by half?
View 6 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WDR3600 - WDS Encryption Support
Mar 1, 2013Region : Italy
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.17 Build 120508 Rel.45884n
ISP :
I've got two WDR3600
the first one is the main router:
- connected to ISP modem
- DHCP on
- 2.4Ghz radio to serve WiFi clients security WPA-PSK
- 5GHz radio to link to the second WDR3600
protocol 802.11n only
the second WDR3600 is WDS of the main router:
- DHCP off
- 2.4GHz radio to serve WiFi clients security WPA-PSK
- 5GHz radio to link to the first WDR3600
protocol 802.11n only
All is working fine, however WDS connection works only with security off. WPA-PSK is not selectable, cannot test WPA2, no radius server available, WEP not supported due to incompatibilty with 802.11n protocol. Is this the expected behaviour? How to get WDS working with WPA-PSK encryption? Could this be due to the firmware or s it a limitation of Atheros chipset?
Cisco AAA/Identity/Nac :: ISE Trustsec With 6500
Apr 27, 2013I've ISE v1.1.2.145 and Cat 6500 IOS ADVENTERPRISEK9-M, Version 15.0(1)SY2
I'm trying to add 6500 in the trustsec group with ISE and followed the trustsec 2.1 documentation. After configuring it keeps on giving me error in the ISE logs below with the subject #CTSREQUEST#
11302 Received Secure RADIUS request without a cts-pac-opaque cisco-av-pair attribute
Below are the steps:
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
15012 Selected Access Service - NDAC_SGT_Service
11302 Received Secure RADIUS request without a cts-pac-opaque cisco-av-pair attribute
Also after i configure cts credentials and radius-server pac command in 6500, it starts giving me log messages that radius is down and the next moment it comes up again. It is continously doing that.
Cisco Switching/Routing :: Nexus 7010 / VSS - Does It Support Virtual Switching?
Apr 9, 2010Does the nexus 7010 support virtual switching yet? All of the posts I have found from about a year ago say that it is going to be supported, but there were no dates listed. I heard the same thing from Cisco a while back, but haven't followed up with it.If it is supported finally are there any configuration guides available for it?
View 7 Replies View RelatedCisco Switching/Routing :: Does Catalyst 3550 Support Inter Vlan Routing
Jul 24, 2007Does Catalyst 3550 switch support inter vlan routing ?
View 12 Replies View RelatedCisco Switching/Routing :: Nexus 5010 Support For Inter VLan Routing
Jan 10, 2012Can nexus 5010 supports inter v lan routing , as there is no core switch and router available in current network.
View 2 Replies View RelatedCisco Switching/Routing :: 2960 Switch Support IP Routing?
Nov 16, 2011Does the Model "WS-C2960-24PC-L" Supports IP Routing or not?
View 9 Replies View RelatedCisco Security :: Catalyst 3560-X - MACSec Possible With IEEE 802.1Q Tunneling
Apr 16, 2012To use MACSec between 2 Catalyst 3560-X on both sides with a provider network between that is configured for IEEE 802.1Q Tunneling ?
Since MACSec uses 0x88e5 Frames and the Cisco SAP protocol uses 802.1x for negotiation, can that be working ? (I haven't success)
Cisco Switching/Routing :: Does 877 Support Vlan
Jan 28, 2012Coincidentally when i tried to configure router 877 as an adsl router i found that a vlan configuration is included. my question is what is the benefit of using vlans in router ??? i studied that we use it in switches for the purpose of network enhancment from broadcasts and netwrok segmentation. why we use vlans in routers ?
View 9 Replies View RelatedCisco Switching/Routing :: Does 4500 Support VSS?
Feb 28, 2012Does the 4500 support VSS (Virtual Switching System) ? On the official product overview page it says: 1.6 Terabits capacity with Virtual Switching System (hardware-ready)What means Hardware ready ? Does it mean that it supports VSS in the same manner as the 6500 ? The reason I'm asking this question is that I didn't find any info on the Internet about this. We would like to upgrade our network by interconnecting the 2 sites with Layer 2 redundant links (Layer 2 extension), but I'd like to use the both links in a load-balancing manner, which can be a real pain in the *** with STP. The choice is between 4500 and 3750 stackable core switches. The 6500s are very expensive.
View 6 Replies View RelatedCisco Switching/Routing :: Does 887 Support SIP Forwarding
Mar 26, 2013Does this Router Support SIP Forwarding?
View 1 Replies View Related