I'm working on a distribution config for some routers with a software IPS. The problem I'm running into is the final [confirm] during setup. Is there any way to disable confirm messages in IOS?
View 1 RepliesTo have a management tool polling by SNMP some information like CPU load and memory load, I tried to find out the OID.The supervisory card is a WS-X45-SUP7-E with a dual core CPU and 2G of memory.IOS is IOS-XE 3.2.2
Does any OID or nagios template already for the new card ? The Nagios template I use for others switches do not get the good field
I am writing with regard to a high memory utilization that we have on a pair of line card WS-X6748-GE-TX and WS-X6724-SFP for a VSS 6500. I am enclosing a little part of the "show tech"of this VSS 6500 where is possible to see the high memory utilization of the line cards 1/1, 1/2, 2/1, and 2/2, in despite of having some ports in state connected. In addition of this, the IOS installed on VSS 6500 is s72033-ipservicesk9_wan-vz.122-33.SXI6.bin for checking if there are some bugs affecting the behaviour of the Switch for this case.
System Resources
PFC operating mode: PFC3C
Supervisor redundancy mode: administratively sso, operationally sso
Switching resources: Sw/Mod Part number Series CEF mode
1/1 WS-X6748-GE-TX CEF720 CEF
1/2 WS-X6724-SFP CEF720 CEF
[code]....
Is there a way to load a spare compact flash with a running-config, ASA IOS, & ASDM software via card reader? I need to load another flash card with all of the settings necessary for normal operation. This "spare" card will replace the flash that is currently in use. The reason for the replacement is capacity and because of changes made to the running-config. The "in-use" card is 256MB, the "spare" one is 512MB. Also, the new card will have a few changes made to the running-config, so it will, in essence, be a reload.
I have a card reader for the compact flash cards. If there is a way to load up this new card using the card reader, without monkeying with the firewall, I would prefer that. Like I said in the previous paragraph, this new flash card will replace the other one, once it's ready.
Hardware: ASA 5510
CF: 256MB (wanting to upgrade to the new 512MB card)
ASA IOS: 8.4
I have an Inspiron E1705 and my wireless card/adapter takes about 3 minutes to load each log in. I called Dell, and they couldn't find out what was wrong. We tried things from internet settings, to shutting off all the start ups in MS Config. I've had this problem for a very long time. Windows will start up, and it seems like there is a 3 minute wait period of my computer doing nothing, and then finally, the wireless loads in my System Tray.
View 14 Replies View RelatedI have ordered RP2 and it will be having 8GB default memory. What is the difference between memory & Physical memory?Since I am able to see only 4GB memory in my ASR 1004. [code]
View 1 Replies View RelatedA customer wants to get the back-plane load of a cat4506-e chassis with a sup6-E supervisory card.A would like to check how many bus are used on the backplane and if the command "sh envi chassis" is the good and only command to be used ?I'm not sur that there is only one bus on the cat4506-E as with a sup7 card the backbone speed can change.
View 2 Replies View RelatedI'm trying to access ASDM but everytime I put in the IP address I just get cannot display webpage: Here is the copy of my configuration
ASA Version 9.1(1)
!
hostname ciscoasa
[Code].....
I can't load the main page or any user profiles. Can't do it on IE/Firefox/Chrome or the in-game Steam browser. Weird part is that I can use Steam perfectly to play games, Friends system works, etc. Just the websites related to it don't load. Problem started about 2 weeks ago, went away for 5 days, but then came back (only messing with Steam websites again). I know the problem isn't Steam because all my friends have been able to use it normally this whole time.The problem is not limited to my own PC, every computer on my network has the same problem, even iPads/iPhones. I've checked for malware, came up clean; reset router to factory settings, done everything I've been able to come up with and the problem persists.
View 3 Replies View Relatedinternet connection ok but get website found waiting for reply (vista)
View 1 Replies View RelatedHow fun. Earlier this week, my state experienced some severe weather which ended with a tree on our street falling and the power going out all day. It took a bit longer after that for our cable services to be restored - internet included. Ever since then, my computer in particular seems to be screwing things up for everyone else. When my computer is shut off, every other computer (one laptop, two desktops) in the house has been able to connect to the internet and maintain that connection all day. However, as soon as mine connects, the connection dies within minutes - for everyone.
I thought it could be an IP conflict but every machine in the house is set to obtain their IP automatically. Interestingly enough, when the XBOX 360 is bridged through my computer it (the xbox) also maintains a connection, albeit a slower one.I have reset both the router and modem, including hard resets, and I've pinged and pinged and pinged. The same thing seems to happen regardless of whether I am using a wired or wireless connection. Here's what I have:
Computer model is HP DV6838nr.
Modem is Toshiba DAZ8821F.
Router is Linksys wrt54g v5.
I am running Windows 7 Ultimate.
I am using Firefox but have also tried Opera with the same results.
--
+ Computer has been showing a successful connection in the Network and Sharing Center even when websites fail to load and the connection has gone down for others.
+ When trying to use a wired connection for the first time, the computer could not connected. IT jumped back and forth between "Identifying..." and no connection at all.
+ I reset the router with both wired and wireless connections. With the wireless, it would become functional for a few minutes after being reset and then fail again. With the wired, the router would not broadcast at all. I ended up having to unplug it for a minute and then plug it back in to get it to broadcast again.
+ I tried using my cable with just the modem, but the Data and PC lights failed to light up upon doing this.
+ After all of this, I removed the wired connection and re-enabled my wireless on the laptop. Connection was restored for a few minutes.
+ Despite a successful ping after two minutes, most websites wouldn't load.
+ Switched to a different laptop after turning mine off and was able to maintain a normal internet connection for over an hour.After starting up the computer for the first time:
C:UsersManda>ping yahoo.com
Pinging yahoo.com [67.195.160.76] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.[code].....
Interestingly enough, despite the successful pings I was still unable to get most websites to load on my browser.
I have a small notebook Acer, win xp, atheros wi-fi.I've had no problems getting on the internet, until,on my desktop computer, with Belkin Wi-Fi add-on, I set up security on my network. Now my Acer will not load Internet Explorer.Once I gave the network logon and passkey on the wi-fi network on this computer, the Acer tells me I have connectivity and very strong signal, but IE will not load.I connected the wi-fi router direct to the Acer and again connectivity is strong but IE will not load.I direct connected cable internet to the Acer and again connectivity is there but IE will not load.I know if I re-do the security and put no-security on the network it will probably work but I really don't want to do that.
View 14 Replies View RelatedI have today the issue that I am unable to load certain websites, I can enter but whenever I click on continue to navigate in that same site for example FACEBOOK, I see the operation just loads and dont go anywhere, after that remains in same condition unless I cancel or close the browser.I checked the firewall, and also the antivirus, but nothing seems wrong, I can get in into HOTMAIL, GOOGLE, but again certain sites if I search something on GOOGLE, get frozen again .
View 1 Replies View Relatedwhen load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI.I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my.
View 5 Replies View Relatedim at university and im trying to get connected with their wifi. When i start up the computer it says that I am connected but when i try to access the internet it won't load. I have tried doing a virus scan and i have tried using other browsers but i still can't figure out how to fix it. Also, it works when I plug an ethernet cable into the wall but as soon as i take it out it stops working.
[code]...
I did nothing different to my computer. It was online fine and then an hour later when I came back, it wouldn't load any pages. I have a DSL modem and a wireless router that also connects another family member's desktop to the Internet. (As well as our phones via wifi.). The connection is fine on the other PC through a wireless adapter (both are desktops), and on the wifi the phones work perfectly so I know the modem and router aren't the problem. But even though my desktop says it's connected (not wirelessly, it directly connects to the router.), no pages will load. If I use chrome browser it eventually tells me this webpage is not available regardless of which page I try to load, or sometimes it's telling me no data received - unable to load the webpage because the server sent no data. Yet oddly a couple of times after forever it seemed to half load a couple pages. Internet Explorer just keeps trying to load pages forever with blank white page as a result.
View 10 Replies View Relatedcannot load Facebook games
View 1 Replies View RelatedLoading yahoo page on windows 7.
View 1 Replies View RelatedI have trouble with new installation LB ACE 4710 for Oracle application load balance. Problem: Unable to PING VIP - 10.11.10.55 / 24
Below are the simple configuration parameters:
1. ACE 4710 is connected with Cisco 3560 Switch - L2 Trunk (Channel Group)
2. Cisco 3560 Switch is connected with Cisco 6500 Switch (Core) also L2 Trunk
3. There are 3 Vlans,(255, 310, and 370), Vlan 255 is management Vlan
4. Real Servers and Virtual IP are part of Vlan 310
- VIP - 10.11.10.55
- Real Server1 - 10.11.10.46
- Real Server2 - 10.11.10.47
5. Gateway is 10.11.10.1 (vlan 310), 10.11.70.1 (Vlan 370)
Ths only hapeens at one location. All the other locations are working the difference is this location goes through the firewall. If I bypass the firewall at this location it works.
View 1 Replies View RelatedThis problem just started. I am unable to load certain https sites (for work). If i directly connect to ethernet, it works, so my isp isnt my problem. When i try to connect to the sites, it says "sending request" then times out. I have played around with the settings non stop and nothing has worked. I have a mac running 10.7.5.
View 3 Replies View RelatedRegion : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Bell Canada
We have a WDR4300 router that works well about 98% of the time. We have a static IP address from our ISP configured through PPPoE in the router and are hosting our own email and web server at local IP 192.168.1.200 behind the router. Port forwarding is enabled and working beautifully.
At some times throughout the day, any computer behind the router on our local network is unable to browse to our own website by our domain name (e.g. www.xyz.com) nor by the static IP it is attached to. We also get e-mail errors with mail client configured to use the domain name or the static IP it is attached to as the outgoing mail server. When this happens, I am still able to browse any other site on the internet without problem... just not our own. Also, I have verified that while this is happening (internal computers can access the internet but not our own website):
1) I can browse to our website just fine from a computer outside of our network (e.g. a proxy or a computer controlled remotely from my home)
2) a computer from within the office that cannot reach our website using the domain name or the static IP it is attached to can still reach the website by browsing to the local IP address of the web server (192.168.1.200)
3) the problem seems to resolve itself sometime within 45 minutes of noticing it is occurring if we do nothing. We can make the problem resolve itself sooner by restarting the router.
I have the impression that this problem MIGHT start occurring when users are downloading files from our website. Of course, if this is the case, we cannot simply restart the router to fix the problem because then we are cutting off their download.
I just bought a Huawei E586 Mifi from 3 network in the UK and installed a 32GB micro-SD card. I want to be able to access this card wirelessly, but the "dashboard" (web interface control panel) that is installed doesn't have an option for the SD card. I have seen dashboards on the Internet and also a video on Youtube that do have this option, so I know this can be done.
View 9 Replies View RelatedI have a wireless modem/router that I connect to my PC thru USB cable and working fine. I newly installed Lan Card (Realtek RTL8139/810x Family Fast Ethernet NIC) and it doesn't connect to internet. It says connected with 100Mbps but Received data bytes are ZERO.
I did ipconfig/all and got all static address I had given while setup. When I "ping 127.0.0.1" it works fine. When I ping 'default gateway IP' it also sends/receives data. When I try to install the driver I got in the CD along with the LAN card, it says "you have already installed recent driver needed etc. " and doesnt allow me to install from the CD. Currently it shows 'Driver Used as : c:windowssystem32driversRtnicxp.sys'
I have two Dell latitude xpi computers that I am trying to get to the internet. Both work well except for making the connection to the internet. The w95 computer is using version 4.0a. I am using a Netgear ma401 pcmcia card. When looking at the the signal strenght it says excellent and everything seems go until you click IE icon (5.5). I comes back stating that it could not connect. The same is true for the w98SE machine. Same wifi card and same results. The card is good and the computer is good, but I have not set something correctly.
View 13 Replies View RelatedCannot get my Intel WiFi Link 5300 wireless card to install properly on my my Latitude 6500 using XP SP3. I can go to the Intel website and download the latest driver but once everything has been downloaded and ran, then restarted the wireless icon says that my driver is not installed.
View 13 Replies View RelatedRegion : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : BSNL
I'm unable to configure my Data Card (ZTE-AC8700). I tried with manual settings but it keeps on showing the message "connecting" but doesn't connects although my datacard is shown as identified by the device MR-3020. I'm using BSNL EVDO connection and my datacard is ZTE-AC8700. It doesn't uses any APN, only a username and password and dial number "#777" is required to connect. configuring my datacard with MR3020 ???
I'm unable to connect to the internet because my Dell Wireless 1390 WLAN Mini-Card says that "This device cannot start. (Code 10)"
I have an Dell Inspiron 1520.
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedWhat causes LMS 4.1 to have high memory utilization?
View 4 Replies View Relatedit is possible use 1 or 2 Gb memory with ASA 5505 or only 512 Mb ?
View 3 Replies View RelatedUpgrading the memory on an 1841. After inserting a 256MB/PC133/SDRAM/DIMM it would not post during the boot, hangs.If i take out the chip it works fine.The on-board memory is 128, so the 256 is the max it would take to a total of 384. According to the documentation this should work.The memory chip is a Transcend chip, basically Samsung.
View 2 Replies View RelatedI am doing the initial configuration on our ASA 5510 to use our Radius server just as our 3005 VPN Concentrator did. I can do the test connection inside the ASA with no problems, and when I authenticate using the Anyconnect client, it appears to authenticate fine, but then dumps the connection with an error stating there is not enough memory in he ASA to allow this connection, the error message is as follows:
Error Message %ASA-4-722004: Group group User user-name IP IP_address Error responding
to SVC connect request.
Explanation There is not enough memory to perform the action.
Recommended Action Purchase more memory, upgrade the device, or reduce the load on the device.
Can this really be the case with no connections active, a single user attempting to authenticate through Radius and an out-of-the-box ASA 5510?