Cisco :: Unsupported Device In CNA - AP1131
May 11, 2012
We have a site with 4 access point, where two are are showing up in CNA, version 5.7(6), as "Unsupported device" the two others are working fine.
The unsupported devices are:
AIR-AP1131G-E-K9
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1)
The supported devices are:
AIR-AP1131AG-E-K9
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
getting CNA recognize these access points?
View 7 Replies
ADVERTISEMENT
Jul 3, 2011
I have CNA 5.5 and have upgraded our 4506 with sup. v4 to cat4500-entservicesk9-mz.150-2.SG.bin (latest version). CNA shows the 4506 as an usupported device.
View 4 Replies
View Related
Nov 3, 2011
I recently ordered and received Cisco Catalyst 3560-CG Series 8-port PoE switches (ws-C3560CG-8PC-S). In running the Cisco Network Assistant (Version 5.6(3)) they show up as an unsupported device. The documentation for this product indicates that you can use CNA to configure this switch. Is there a download or patch available to correct this problem?
View 8 Replies
View Related
Jul 12, 2011
I have a problem with an AP1131-AG access point.When I update the CLI it does not update on the GUI and vice versa. The access point is connected to a 3560 switch and there is no WLAN controller involved.
View 8 Replies
View Related
Aug 31, 2011
I got a report from a branch office which is getting trouble to authenticate users to the WLAN this is a stand alone AP which has a configuration script that we use for all our branch offices but in this case is not working. It seems to be an issue with RADIUS but if it was the case the whole company would be experiencing problems since it is a central RADIUS server.
Here is a log from the AP By the way I modified the radius server timeout to 90 sec
APIMMEXP01#
Sep 1 17:01:47.240: %DOT11-7-AUTH_FAILED: Station 0021.5c7f.1739 Authentication
failed
Sep 1 17:01:53.503: %DOT11-7-AUTH_FAILED: Station 0026.c64b.c3d6 Authentication
failed
Sep 1 17:01:58.739: %DOT11-7-AUTH_FAILED: Station 001e.65cf.9ca8 Authentication
failed
[code]....
View 1 Replies
View Related
Feb 20, 2013
I have a brand new lightweight AP that keeps rebooting every 2-3 minutes.
View 1 Replies
View Related
Jun 15, 2011
IPods and IPads to connect to stand alone AP1131? My scenario is as follows:
There is a section of a campus that is covered by 14 stand alone AP1131 were I experience the problem. The security parameters are: 802.1x, wpa enterprise, tkip
The other section is under WLC also AP1131 but in this case in WLANs/Scurity/Leyer 2 I checked boxes:
WPA Policy, WPA Encryption TKIP
WPA2 Policy, WPA2 Encryption AES
Auth Key Mgmt 802.1x
Wonder if the fact that I chose WPA2, AES makes a difference with stand alone mode? Anyways I tried configuring AES in stand alone APs and it didn't make a difference since I could not connect either.
View 9 Replies
View Related
Oct 15, 2012
I am trying to use a Dell FTRJ8519P1BNL SFP fiber module in a Cisco Catalyst 3560 and have already run these commands: no errdisable detect cause gbic-invalid service unsupported-transceiver.But I STILL am getting these errors even after shut/no shut on the port.
View 19 Replies
View Related
Jun 8, 2010
I am looking to uplink an HP Blade Chassis to a Cisco 3750-X with SFP+ for 10Gig on each end.I would like to use Direct Attached SFP+ cables if possible.I already know that the HP Virtual Connect module will not accept a Cisco Direct Attached cable at the current firmware.Cisco Nexus 5000 has a feature allowing connectivity with the HP Direct Attached cable using "unsupported" mode.
View 3 Replies
View Related
May 14, 2012
I seem to have managed to set a 2960 to 230400 baud in the boot loader. Is there anyway to reset the variables in the boot loader? Maybe a set of pins to short? I can't access the console port reguardless of what I set the rate too. I've tried both the USB console cable and a USB to serial. Is there anything I can do short of an RMA?
View 4 Replies
View Related
Apr 7, 2011
I have a 2811 with 512 of memory installed (two by 256). The router has been sitting spare for sometime and I know there was once a memory problem with it long ago. It has two 256M Non ECC DIMMs installed and seems to work fine. I recently tried to install a 512M DIMM ECC and all I get is 'Unsupported DIMM" error - same if I remove the other 256M DIMM leaving just the 512M. I have tried three different DIMMs - and all have the same error message. One of the DIMMs is 'cisco supported' and based on what I can find in the web - seems to be the correct spec. I have also tried non ECC 512 DIMM and 'unsupported DIMM" error message is still coming up. If I did not know better, I would say that there was something that needed changing in the config to allow 512M DIMMs to be installed.
View 6 Replies
View Related
Apr 19, 2006
We are running IOS12.4(5a) on a 2821 and have "ip inspect esmtp" enabled. We noticed that every day several emails end up in the postmaster account with the following message:
"A mail message was not sent due to a protocol error.
500 Firewall Error
The message that caused this notification was:"
On closer inspection the router logfiles show:
Apr 20 08:54:19 loghost 830747: 810587: Apr 20 08:54:19.441 BST: %FW-3-SMTP_UNSUPPORTED_PARAMETER: Unsupported SMTP parameter (Data Size (> 20000000)) from initiator (172.16.1.6:3537)
But the emails in questions are just a few kB. So what is going wrong. This is especially disturbing because the users don't get a notification that the email has not been delivered.
View 2 Replies
View Related
Jan 19, 2010
Receiving syslog message :%SIP-3-UNSUPPORTED: Unsupported ptime value. But we have no SIP-related commands in our config. We reloaded router Friday eve 1/15 but two more %SIP-3-UNSUPPORTED: Unsupported ptime value messages re-appeared on 1/18. The router in question is a 3745 running c3745-a3jk9s-mz.123-14.t7.bin. This router does have one interface facing an ISP.
View 4 Replies
View Related
Dec 4, 2011
We ordered the wrong part number for a Cisco 4506 non-E chassis, the part number is: WS-X4624-SFP-E and the device is showing "Unsupported module"; What would the part number be for the non-E? WS-X4448-GB-SFP,Catalyst 4500 48-Port 1000Base-X (SFPs Optional) ?
View 1 Replies
View Related
Jan 17, 2012
When i swapped a Sup v 10 ge for a Sup6 E Tonight in order to take advantage of the netflow capabilites of the Sup V - It came up with module unsupported for the following cards - WS-X4648-RJ45V-E Will these only work with the Sup6 E or what
View 2 Replies
View Related
Jul 17, 2012
I'm trying to get a spare Sup. V engine module operational in a 4507E and get the above message when it try to boots. I am not aware if this spare had been used in production before. [code]
View 3 Replies
View Related
Sep 10, 2011
I'm currently using onboard lan card of P6X58D Premium. However in the Cisco web setup page or even in my Windows 7, it shows only 100Mbps connection. I tried to force to 1000Mbps but it failed to get an IP. I did a google and found that may be the router doesn't do well with Intel card, but I use another onboard lan card with Nivida chip+AMD CPU, it's still only have 100Mbps. What can I do to have a 1000Mbps connection?
View 5 Replies
View Related
Jan 3, 2013
We are using LMS 3.2.1 with SP1 and Campus Manager 5.2.2.Server runs Windows 2003 R2.Everything runs fine except for User Tracking on two Catalyst 6500 switches running CatOS. These devices are discovered, reachable, SNMP works fine, neighbors seen. But when we try to launch acquisition, the UT utility complains with this error message:"Failed to start acquisition: Device unreachable. Please enter a valid device."When we wanted to add ports via Device Trap Configuration, LMS has fired a different error message: "There are no ports to configure for the selected device(s).Check whether you have selected any router(s)." I have checked the portsData.xml file, which doesn't have any ports included for the two devices: [code] We have tried to exclude / include the switches in the data collection, but that didn't work.
View 3 Replies
View Related
Nov 30, 2011
My BEFSR81 is my primary router and has DHCP turned on. The router's DHCP range is set to accommodate 12 devices. I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table. I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go. I would like to be able to tell which printer is which when I am looking at the DHCP device table. How can I get a names associated with each printer's IP address in the router's DHCP device table? (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)
View 1 Replies
View Related
Feb 11, 2013
The problem: I need to track a bus from city to city in real time.I'm thinking of a gps device without screen or apps, it only sends the current location to a server. Is this possible? What device can be useful?
View 1 Replies
View Related
Jan 4, 2012
I have accidentally deleted a device from IPM. How can I re-add it? Do the IPSLA Devices somehow get sync-ed with the devices in DCR.If I use the option "Add adhoc target" will the result be the same?
View 1 Replies
View Related
Feb 14, 2013
Is it possible to use a cisco router, in this case a cisco 887, to bridge an external ip address to a device behind the router? I need this because i only get 1 IP Address from my ISP and i want this IP address on my ASA.
I was thinking of a bridge group, but i'm not sure how to go about it! I would like to know if this is possible, and if this is, how should i configure it.
ISP
|
Router (ATM)
|
ASA (external ip(NAT))
|
Local Network
View 6 Replies
View Related
Feb 10, 2013
when any user logs into LMS #1, GUI says "user not authorized to view devices". All of my users are set to "full permissions" so it seems to be some disconnect here. I'm using ACS for auth, that seems to be working OK. I have a second system LMS#2, setup exactly the same, which works properly, all "full permission" users can access all device menus.
View 1 Replies
View Related
Aug 9, 2011
I an doing device discovery and get the result as devices are unreachable and only 1 device among them getting discovered.Any inputs?
View 1 Replies
View Related
Dec 20, 2012
how can i make cisco LMS 4.2 backup the IOS of my cisco devives and Puted in a folder as backup for this image?
View 1 Replies
View Related
Apr 7, 2010
Two switches, which are not configured for SSH and snmvp3, were picked up during an discovery and automatically added to the DCR. When I view the list of devices in the DCR the two devices are shown, but when I try to edit the DCR to remove/delete the two devices they are no where to be found.
View 2 Replies
View Related
Dec 14, 2011
I have installed successfully installed and configured LMS 4.0 and every thing was okay until the customer decided to change the server IP address without notifying any one.
so i have returned the server to its original ip address since nothing worked after they changed the IP, but even after restoring the old IP address the device descovery is okay, but when i navigate to the devices management nothing appears in the all devices drop down menu and the remaining menues also.
i have tried to restart and to start a new device discovery also i have tried to run a data collection but nothing changed.
still stck on the devices are not appearing in the device management tab.
View 1 Replies
View Related
Oct 24, 2012
I've a strange problem with LMS CiscoView I can't see ONE (its stack of two) device in the CiscoView. and im getting an error mesg'
The LMS is connected to ACS and all the I.T Department can't see this specific device in CiscoView
I've tried: Deleted the device from the LMS and to discover it again.Rest the Demmon Erase it from the ACS and configure it again.it didn't work.
I can use other functional things like back configuration
Details:
LMS 3.2.1Cisco View 6.1.9Device Type - C3750V2-24PSACS Version – 4.2
I'm attaching those files:
LMS Version
[Code].....
View 13 Replies
View Related
Apr 19, 2013
I am looking for a device that sits on a network and allows me to get to other devices on the network remotely, either through ports or through their mac addresses. Each of the device can be configured through a web address config page. As it stands right now, every time we have to change configs on one of the devices we have to send a tech out and pull each device out and manually configure it. I was wondering if anybody knew of a device that could do what I am asking.
View 1 Replies
View Related
Apr 26, 2012
LMS 3.2.1 When I try to check Software and Device packages updates for LMS components, it fails with "Error while downloading package information from Cisco.com for the selected products. See the d:/CSCOpx/log/psu.log file for details." diagnostics.
CSCOpxlogpsu.log shows that it fails with 404 error. Looking to wireshark capture, I see that software make GET to [URL], then GET to [URL], then GET to [URL] with some params, which result in "404 Not Found" error nevermind which product (Common Services, Campus Manager, RME, DFM or others) I try to get updates on.
View 1 Replies
View Related
Aug 29, 2011
In previous LMS versions the DCR could hold more devices then the licenses of the other other applications permitted and using the "user defined fields" we have used it as a general device repository for some customers, pushing only the supported cisco devices to the various applications.In LMS 4 cisco has removed all allocation possebilities from the various applications and replaced it by an all or nothing type of allocation.Does this now mean that any entry in the DCR is automatically counted as a used device license?
View 1 Replies
View Related
Jul 4, 2011
I'm running on LMS 3.2 and RME 4.3.0 and one type of device was not recognized.this is NME-X-23ES-1G (IOS : 12.2(35)SE5) in a 3825 url... this module is supported with the OID 1.3.6.1.4.1.9.1.703,but in the device center I've found something which seems to be the right equipement :
- Cisco Interfaces and modules
- Cisco Network Modules
- Cisco 2800,3800 series 23-port EtherSwith Service module with OID 1.3.6.1.4.1.9.1.664
View 1 Replies
View Related
Oct 23, 2011
Does WLC 4400 is supported in LMS 4.1 in CiscoView.
When I check device update in admin-system-software center. I don't see any available package for the WLC 4400.
View 1 Replies
View Related
