in my company we use Cisco VPN 3020.Actually users connect using CiscoVPN Client, and all traffic is routed into the VPN so that users gets a remote IP Address of the remote public LAN.The problem is that when using VPN users cannot acces anymore their local LAN at home.How can i allow users local LAN access ?All traffic is sent into the VPN also traffic for local LAN.
View 4 RepliesI have 3000 concentrator in 192.168.1.x/24 network (concentrator has static IP of 192.168.1.4/24 assigned to its private int). I can manage it thru HTTP from any PC in the same subnet, but connection failes while trying to connect from PC on different subnet (i.e. 10.1.1.x/24). Is there ACL in concentrator config which needs to be modified to allow management from different subnet?
View 2 Replies View RelatedAbruptly internet access disappeared. It's a router issue, none of the computers here can connect. Further, I can't access the router through a browser - 192.168.0.1 results in a "Firefox cannot connect" message. I've tried resetting the DNS to no avail. I'm typing via cell phone and it's annoying, but I'm willing to try about anything.
View 4 Replies View RelatedI have configure a cisco 861 as vpn server. Clients can connect, but cannot access local lan resources for subnet 10.0.10.0. [code]
View 4 Replies View RelatedI have a Cisco 881 and I want to use Easy VPN.
-VLAN 1: 192.168.4.0
-WAN: 10.0.0.0
-VPN: 192.168.8.0
VPN connects and I get an IP of 192.168.8.100 from my pool. I can ping my cisco at VLAN1 (192.168.4.1), but I cannot access my local resources. I guess I miss a NAT configuration.
I've recently been having issues getting a wireless connection with my laptop (specifically dv6700) running vista. I had previously run it for 2 years without issue, but after returning from Sweden (where there was again no issue connecting wirelessly) I have often only been able to get local access. This isn't on all networks - my University library network works fine, for example, but my flat's personal network as well as my parents' network, as well as a local cafe which I had previously connected to fine, only get local access.
View 2 Replies View RelatedI have a site to site vpn connection between ASA 5510 and PIX 515 which is working fine. There is no problem for hosts on any side of the tunnel to access a cross. However the local ip (192.168.20.1) on the client interface of my PIX is not allowed to access hosts on the other side of the tunnel. [code]
View 2 Replies View RelatedI want to limit a local user's access to some specific groups of devices. In Role Management Setup I can define which service they can access, but I want to restrict it to a specific device as well.
View 3 Replies View RelatedI have going up the walls the last week.Basically just moved house and got broadband installed, my girlfriends laptop connected automatically, whereas my Compaq CQ60 Presario Notebook WindowsVista will not connectI have checked so many different forums trying to fix this problem, but to no avail im afraid... it looks like there is an excellent internet connection.... but cannot go on the internet because it says "Unidentified Network local access only"
View 6 Replies View RelatedAfter I changed the router password today, I am not able to access the Internet through my machine. Seeing the 'Unidentified netwrok, access to local only'. However, other people connected to the same network are using Internet
View 14 Replies View RelatedI want to Turn off my local network's firewall on my computer but i dont know how.
View 1 Replies View RelatedMy brother is visiting me, and i am trying to connect his computer to my router (wireless), i got connected but access says local Only.When connected by wire i get internet access ( Access: local and Internet)His computer had several adwares/spywares and numerous toolbars...... that i uninstalled. Cleaned by Malwarebytes and AVG 2012 free edition.Scan results are clean now.
ISP: RCN (cable 25mbps)
Router: Cisco Linksys E1000.
Cable Modem: Motorolla surband
I have 2 other computers connected through wifi on this router without any problem. Vonage Phone is connected to this router. Xbox is connected wireless and LG Blu-ray player is connected (wired).Xirrus Wi-Fi inspector screenshot is attached, IPCONFIG /all was run wile wireless was on ( of course Local only) but cable was not connected.
Windows IP Configuration
Host Name . . . . . . . . . . . . : PK-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
I have a Compaq Presario Windows Vista. I currently have a Wireless router. It used to be Netgear. About 2 wks or so, my company changed it and gave me the password. I am currently connected to the one they changed to but local access only and no internet. Under Network and Sharing Center, it says: Unidentified network (Public network) Access: Local only Connection: Wireless Network Connection (perfectv) Under Internet Options, Connections , it shows the following connection: T-Mobile US Standard Modem When I try using the Windows Network Diagnostics, it keeps coming back with the options that havent worked. The options are: - Plug a cable into the network adapter Local Area Connection - Automatically get new IP settings for the network adapter Wireless Network Connection - A problem with your network router or broadband modem might be preventing an Internet connection Note: I am always able to connect to the internet wherever free wi-fi is available. If a password is required all I need is to obtain it and enter it without making any changes in the system. This is the only time Ive had issues getting online, even though I have the password.
View 5 Replies View RelatedI tired connecting my Sony TV to the internet.It wouldn't connect automatically so I manually entered
IP Address 192.168.1.200
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Primary DNS 192.168.1.1
Secondary DNS 0.0.0.0
When it tested that it only gave me local access but not internet access. What else can I do to fix this? I use a netgear router WPN824N.
I have a few servers and resources on my local network. A Web server,a game server, a ventrilo server, a few ip cameras with web interface, an IR to IP bridge (web interface),a VPN, a few routers throughout the house, etc. I've been wondering how to get access to those devices from the web, in particular to be able to access the web interface of those devices. VPN access is excluded,I want to do it from a browser.Right now my setup is pretty simple: I have a domain name,and my router is set to forward a :80 request to my web server.Same for the VPN and game serves,at their respective ports.However, I need to be able to access the other web interface,and since I cannot assign an external port to each device in the router table and add the port number at the end of my domain name (not possible of course), I need to find a way to access these other web interfaces.I was thinking of setting a webpage on the web server which lists all resources and their links,but I am not sure if it is possible.For example,I create an admin page on my server asking for a login.Once logged in,a webpage appears displaying IPCam1 for example.Clicking on this link would forward to the local ressource,in this case 192.168.x.x:99 (the address of the cam web server)however,I do not know HTML and I am not even sure it is possible.
View 7 Replies View RelatedI just replaced my wireless router. Wh? Now I'm not sure, I hoped a dual band router would give me better range. True or false?Regardless, I installed my new router but can only connect to my local network on my home laptop. However my work laptop connects to the same network and internet with no problem. SO does my husband's work computer.Any idea what the problem is? Other weird thing is that I have some random unsecured network that keeps popping up and my computer keeps automatically connecting. I've tried to remove it every way possible and it keeps coming back?
View 1 Replies View RelatedI have recently set up a computer on my network to host a website.So i have done the basics and created a Dyndns account etc.Now I can view the website via this domain flyingant.dyndns.org/ on computers outside of the network and the pc that it is hosted on.But my problem is that I cannot view the website on any other computer on the network, it takes me to the routers login page.
View 2 Replies View Relatedi have a problem with my asa 5505 Remote VPN Connection with local network access , the VPn is working fine and connected , but the problem is i can't reach my inside network connection of 192.168.30.x , here is my configuration
ASA Version 8.2(1)
!
!
interface Vlan1
[Code].....
Our companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
View 1 Replies View RelatedIf there was a workaround for me to connect to the internet outside of my citrix session? I work remotely for my company through citrix access gateway and can open/access the internet from within the session but any attempt from a browser/program outside of the session times out...I am thinking this is blocked on purpose for productivity reasons, however I want to be able to access the internet from outside of the session so that accessing personal sites for example, gmail, won't be tracked by my company.Would it be possible to run a virtual machine and change IP addresses so access within the machine runs independently of my session?
View 1 Replies View RelatedI'm trying to develop and test a website from my iPad. I have my laptop and iPad on same local network, 192.168.1.xThey can see each other over network and I can access the page:192.168.1.105:80 (my laptops local web server) from both iPad and laptop. However the application server runs on port 8080 and I cannot access this from either device/machine. the router's firewall is playing a role, and I have no software firewall running on laptop that I'm aware of (turned off windows 7 firewall).localhost:8080/myWebSite or 127.0.0.1 also works on port 8080.The only combo that does not work is 192.168.1.105 with port 8080. I need this so the iPad can hit the site so I can test locally while developing.
View 4 Replies View RelatedI got a new TP-Link WR740N router and I'm having a problem with it. Everytime I enable security (WEP, WPA etc.) the signal on all notebooks will go "local access only" immediately, even if I use the right password. Router signal is always there, but Internet access will only be available if security is set to "unprotected" on the router setup. Funny thing is that my old router (Linksys WRT54) had WPA2 on and everything was ok.
View 4 Replies View RelatedMy laptop has windows 7 , its connected to the internet wireless , now , i want transfer files from my desktop to the laptop so i cannect them with an ethernet cable.. now how i can make that happen , my desktop has window xp
View 1 Replies View RelatedIn Windows Vista I am able to connect to wireless router, but can't access internet due to Local message only. Have repaired network adapter , reset cable modemm unchecked version 6 of TCPIP network settings.
View 3 Replies View RelatedMy Laptop will only connect to the internet if I directly connect the ethernet cable from the router to the computer. Otherwise it will 'connect' local only[CODE]
View 1 Replies View RelatedOne of our servers recently lost its outbout network connectivity. It can ping and communiate with any computer on our LAN, but it can't communicate with anything outside our network. It has a statically asigned IP address, and can ping the default gateway. We haven't changed any settings on the firewall or gateway....
View 1 Replies View RelatedWe've had no problems with our Internet before but yesterday I could only get local access connection. Neither my iPhone, laptop or home computer cud get any further than local connection on wireless.I'v tried the classic turnin it off and on (the router) and I'v tried connection with a cable but still gettin the same connection level! The router is a netgear if that means anything!
View 1 Replies View RelatedSometimes for a minute sometimes all day until I reset modem/router. It never says not connected though...it always says connected and excellent signal strength but when it won't access internet I can look at my modem/router and tell by the lights its not working even though it says connected. This time even though I reset everything like normal I still can't access internet. I thought it might have been my router so I went and bought a new one and still nothing. Doesn't work wireless or through local connection. Both say connected but nothing. When I do a diagnostic I get the DNS 0x2afc and HTTP 12007 errors. Both computers won't connect so I'm thinking it has to do with my actual router settings or modem.Both Windows XP and Windows 7 laptops won't work.
View 11 Replies View RelatedThis router was just purchased this past week. I have 1 laptop, 1 desktop, and 1 netbook that is connecting to this (along with various smartphones). Set it all up according to the booklet, and ran into some trouble. When connecting through wireless, I only have "Local only" on the older laptop and desktop PC, but full internet access through the smartphones and the netbook. But, when I connect through LAN with the laptop, I have internet connection (only through LAN, not wireless). I suspect this also occurs on the PC, but the two are no where near each other to attempt. I installed the latest firmware version to no avail, and had done a full reset on the router and reinstalled it.
View 1 Replies View RelatedI have a WAP4410N that only allows my laptop local access, no Internet. Here is the scoop:
- Other users connect to the WAP and get Internet access
- Laptop connects to many other networks and has Internet access
- Laptop is running Vista
- ipconfig /all has address, mask, gateway, DNS, and looks normal
- Adapter is Atheros AR5007 802.11b/g with latest drivers
i have configuration my network infrastructure with the asa5505 like on image. i want that my users from lan 10.13.10.0/24 can to access to my LAN 192.168.0.0/24. can i use just routing or i must to use site to site VPN. how can i do it? how configure my asa 5505.on my LAN1 there's DHCP. From LAN side of my asa5505 i must disable DHCP.In my LAN1 i have DNS,Domain Controller. The users from my LAN3 need to access to LAN1 because of authentication and access to resources and programs. i attached my picture with configurtion.
View 2 Replies View RelatedI configure anyconnect vpn on cisco asa version 8.2. vpn user need to access internet so i configured split-tunnel. the split-tunnel working but i do not want to use split-tunnel for security reason. i want vpn user use our local network internet. how i do it?i think that i must do vpn user subnet nat and then what i need do additionally?
View 1 Replies View RelatedI need configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.I have attempted to configure rdp access but it does not seem to be working for me. How to modify my current configuration to allow this? I need to allow the following IP addresses to have RDP access to my server: [code] The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. My configuration file and what are the commands i need in order to put this through. Also, if there are any bad/conflicting entries. Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course.Also the bolded lines are the modifications I made but that arent working. [code]