Cisco WAN :: Enable GUI For Configuration Of 1921 Router?
Dec 15, 2011I have a Cisco 1921 in place with the security IOS so it is also acting as a firewall.
I am wondering if I can enable the GUI so I can configure it remotely.
ADVERTISEMENT
Cisco Switching/Routing :: 1921 Router LAN Configuration
Mar 27, 2012I have recently configured a cisco 1921 router for internal routing on my network. Here is what i am trying to accomplish:
Main network 10.65.1.0 mask 255.255.255.0- all office devies and computers.
Second network 10.65.2.0 mask 255.255.255.0 - All plant equipment machinery and production lines
i have configure gig 0/0 for my company network and gig 0/1 for my plant network. I can ping the router from both networks but am unable to route traffic betwenn them. what am i missing?
Cisco WAN :: Setting Up Correct NAT Configuration Of 1921 Router?
May 20, 2012i'm having some trouble setting up the correct NAT configuration of a Cisco 1921 router. The NAT is not working as I want - I think my configuration is wrong somewhere. All clients in 172.16.0.0/24 have the correct outgoing address of 1.1.1.3. But the NAT for 10.10.0.4 (and 10.10.0.5, 10.10.0.6) is partially broken: Ping and ssh from the outside world to 1.1.1.4 is "natted" to 10.10.0.4 and works as expected. But from inside (172.16.0.0/24) ssh to 1.1.1.4 should be "natted" to 10.10.0.4, but doesn't work (ping works). ssh from 172.16.0.0/24 to 10.10.0.4 (without doing NAT) works.
network design:
===============
172.16.0.0/16: network for normal use
192.168.64.0/24: network for specific clients and servers
[Code].....
Cisco VPN :: How To Convert 881 Configuration To 1921
May 31, 2013Here is a copy of my cisco 881 easy vpn config. What I need to modify so this will work on a cisco 1921.
hostname BTLvpn
boot-start-markerboot system flash:c870-advipservicesk9-mz.124-11.T3.binboot-end-marker
no logging bufferedenable secret 5 XXXXXX
no aaa new-modelclock timezone EASTERN -5
crypto pki trustpoint TP-self-signed-733417695enrollment selfsignedsubject-name cn=IOS-Self-Signed-Certificate-733417695revocation-check nonersakeypair TP-self-signed-733417695
crypto pki certificate chain TP-self-signed-733417695certificate self-signed 01 30820244 308201AD A0030201(code)
Cisco WAN :: 1921 - Configuration With IP Base Software
Jan 31, 2011I'm having a problem when configuring this cisco router 1921 with an ip base software. Accordingly with the Cisco software adviser this software allows to configure the l2tp Client Initiated Tunneling. But configuring the router the commands are not recognized:
Router(config)#pseudo wire-class L2TP_PSEUDO
^
% Invalid input detected at '^' marker.
Router(config)#interface Virtual-PPP1.
Cisco :: Configuration Of Terminal Server On 1921?
May 18, 2011Since Cisco 2511 is out of sale now and Cisco 1900 series are recommended to replace for the purpose of terminal/comm server. How to configure terminal server on HWIC-8A module?
View 3 Replies View RelatedCisco WAN :: 1921 NAT / Remote Access Configuration
Dec 15, 2011I have to open several ports from the WAN to LAN on a 1921:
For example:
Say I need port 41795 both UDP and TCP to go from the WAN to the LAN, can some provide me the context I have to follow?
Currently I have this in place
Another piece of this is that the devices that will need to be accessed remotely are on VLAN10 - will that cause a problem?
is installed at a clients home for a very complex Crestron network that included 5 Cisco POE GB switches, 2 VLANS, with VLAN10 utilizing QOS and is the AV network (VLAN1 is the computer network), 8 1142 WAP's, and this 1921.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.12.16 19:52:41 =~=~=~=~=~=~=~=~=~=~=~=show runBuilding configuration...
Current configuration : 3340 bytes!! No configuration change since last restartversion 15.1service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname DHOWE_Router!boot-start-markerboot-end-marker!!enable secret 5 $1$JuTn$zn6CnXIm1bJGgPhtRCfB0.enable password ********!no aaa new-model!!no ipv6 cefip source-routeip cef!!ip dhcp excluded-address 192.168.39.0 192.168.39.49ip
[Code] ........
Cisco WAN :: 1921 / Internet Failover Sample Configuration
Sep 22, 2011sample configuration for internet failover . i have 2 ISPs with one coming in thought a serial cable and another through internet and would wish one take over after the other has failed .The router is Cisco 1921 .
View 4 Replies View RelatedCisco WAN :: New 1921 Doesn't Display Running Configuration
Apr 28, 2013I've recently received this new Cisco 1921 routers with Cisco CP loaded, so it comes up with the annoying change username and password at first access. I've removed all of those files from the flash memory, and rebooted it, and it came up with the proper initial configuration dialog, which is what I wanted. But, whenever I configure the router with a set of basic configuration, like interface, routing, and snmp loggings, and hit wr mem, it doesn't display at all when I do "sh run". It's weird cause when I do sh run | sec rip or any other stuff that I have configured, it shows up , but not in sh run at all.
What's the deal with the new routers? Even sh version doesn't show the config-register or memory allocation details.
xxxxx#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[Code].....
Cisco WAN :: 1921 Frame Relay Bounded T1 Configuration
Feb 24, 2013We have frame relay T1 circuit at one of our remote site. Which is connected to our core frame relay router which have DS3 circuit.Now we bought second T1 line at remote site and now I have to configure Bounded T1 with Cisco 1921 router.good config example or document on how to configure frame relay bounded T1 ?
View 1 Replies View RelatedCisco :: 1921 - DHCP Configuration / Assign Fixed IP To One Device While Assigning Others?
Jun 19, 2012This is IOS 15.1(4)M3 on a 1921 router. The LAN is 192.168.42.1/24. (DHCP config is further down.) We have a small range that we want to assign via DHCP to devices; .200 through .220 . At the same time, we have a handful of Macintosh systems to which we want to assign a specific address that is not in that 200-220 range. I don't want to configure the assignment based on the Ethernet MAC addresses because these systems might connect via UTP or wireless; that is to say, they have more than one MAC address. They only ever connect using one interface/MAC address at a time, but it's their choice; in some areas wi-fi is available, and in some areas they have to cable-up.
The Mac OSX network settings has a field for "DHCP Client ID". It would be much easier to tell the users of these systems to put their Mac's name in the Client ID field for both their wired and wireless DHCP configs. (As opposed to having them all lookup, and then give me their Ethernet MAC addresses for both of their interfaces.) I tried this with my Mac's (named "shrike") wi-fi interface, but I don't get the 192.168.42.14 address that I expected. I get an address from the .200 to .220 range.
Here's the DHCP-related config from the router:
router#sh run | s dhcp
ip dhcp excluded-address 192.168.42.1 192.168.42.199
ip dhcp excluded-address 192.168.42.221 192.168.42.254
ip dhcp pool OurOffice
network 192.168.42.0 255.255.255.0
[code]....
Is "client-name" the wrong place to configure the DHCP Client ID?
Cisco WAN :: 891 - Configuration To Enable The FE8 Port
Jun 23, 2011I am switching out our old WRVS4400 router to the Cisco 891. Having a problem configuring the Cisco 891 router. I changed the V LAN port on the 891 from 10.10.10.1 to 192.168.2.1 and the ip address saves but when I try to rediscover it through the CCP to the new Ip address 192.168.2.1 I get the message discovery failed.
The sub net mask I used is 255.255.255.0 The only thing connected to the 891 router is our linksys 48 port switch which is SL248G and my laptop is connected to the switch. The port its connected to is FE LAN 0 . How do discover the 891 so I can do further configuration and to enable the FE8 port for using it for our internet connection?
Cisco AAA/Identity/Nac :: How To Enable ACS 5.2.0.26 Configuration Audit
Oct 12, 2011ACS and i would like to know how to enable the "Configuration Audit" for someone login to my network devices using their ACS login and i can monitor what they did on it.
ACS Version : 5.2.0.26
Cisco WAN :: 6509 - How To Enable Netflow / Configuration
Jan 21, 2013Below is the show ver of 6509 switch , how to enable netflow
sh ver
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXI7, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Mon 18-Jul-11 05:50 by prod_rel_team
[code]....
Cisco Switching/Routing :: IP SLA Support On 1921/K9 Or 1921-SEC/K9?
Oct 5, 2012We want to puchase new Cisco ISR 1921/K9 . i want to know does it support the following sample IP-SLA commands
ip sla 2icmp-echo 172.16.1.2timeout 500frequency 1ip sla schedule 2 life forever start-time now
track 10 rtr 1 reachability
delay down 1 up 1
!
track 20 rtr 2 reachability
delay down 1 up 1
ip route 0.0.0.0 0.0.0.0 192.168.1.2 track 10ip route 0.0.0.0 0.0.0.0 172.16.1.2 track 20
Im asking above question because we will need to enable ip-sla on the mentioned router. as i read on the cisco webside, it says Cisco-ISR-1921/K9-IP Base support only IP-SLA RESPONDER feature nothing else. If Cisco-921/K9 does not support the above commands , should i go for ordering Cisco-1921-SEC/K9 ?
Cisco AAA/Identity/Nac :: ACS5.2 - Allow Show Running Configuration Without Enable
May 24, 2012I am using ACS5.2 I want user to access the device with all necessary command like show run/ver/int/log… I try to set user privilege using Shell from 1 to 10 but show run doesn't work.
View 15 Replies View RelatedCisco AAA/Identity/Nac :: 3845 - Enable Secret Password Missing In Configuration
Jun 23, 2011Recently I came across a router (Cisco 3845, IOS 12.4) configured for TACACS, one local username and an enable password. Going through the configuration I noticed the router didn't have an enable secret password which I thought was strange. The TACACS config is below, comments regarding the TACACS config and the consequences of not having an enable secret or if there is a need for one.
aaa authentication login default group tacacs+ aaa authentication login no_tacacs enable aaa authorization exec default group tacacs+ aaa authorization commands 1 default group tacacs+ aaa authorization commands 15 default group tacacs+ aaa accounting exec default start-stop group tacacs+ aaa accounting commands 1 default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+
Cisco WAN :: DNS Regarding A 1921 Router
May 18, 2011I have installed a Cisco 1921 router in our company and i have stumbled upon an issue with the DNS.
We have a internal DNS server and an internal WEB server. In the DNS server there are records pointing to sites on the WEB server, this is working just fine.
The thing is when i use a public DNS such as 8.8.8.8 (googles public DNS) i cannot resolv the external IP of those sites. I do not want to access the sites and i do not want to send any packets to the sites. All i want is to query the public DNS and resolv the public IP where the site is.
Cisco WAN :: Possible To Upgrade 1921 Router
May 3, 2013I am really stuck with router requirement for one of our client. I need 891 SEC router. I think this comes with advanced IP services. What I have is 1921, with IP Base. can I upgrade 1921, so it will become alternative to 891 SEC.
View 1 Replies View RelatedCisco WAN :: Traffic Going Across The Router Is UDP 1921
Feb 23, 2011I'm attempting to set up a Cisco 1921 router running IOS15, and am having trouble with the NAT - it might be that what I am attempting is not possible. The only traffic going across the router is UDP, and the outside of the network canot be changed.
View 1 Replies View RelatedCisco WAN :: Router 1921/k9 Features?
Jun 4, 2012I wish to use a 1921/k9 as a router on a stick. Inside interface interconnects up to 9 VLAN, and performs the routing. Does the 1921/k9 supports trunking and VLANs (I think it should support 16 VLAN, but I am not shure) or I should choose 1921-SEC-k9? Routing performance is the same both on 1921/k9 and 1921-SEC-k9? (I think I'll use static routes or RIP, it is not a large network)
View 1 Replies View RelatedCisco WAN :: 1921 Router Won't Route LAN To WAN Traffic
Feb 18, 2012The router passes the Interface test for the WAN port in CCP but it still we cannot access the internet. Here is my configuration:
Building configuration...
Current configuration : 3663 bytes
!
! Last configuration change at 09:29:52 Chicago Mon Feb 20 2012 by fbcpekin
version 15.1
[Code].......
Cisco Infrastructure :: Configuring NAT On 1921 Router
Jan 31, 2012We are having problems configuring NAT on our Cisco 1921 Router. Below is the running config. The problem we're having is for example our FTP server 192.168.1.16, cannot be accessed from its outside IP address, which is NATed on the router. The server is verified to be up and running and when we do a show debug ip nat, we see the router is translating outside users attempting to access the ftp server to it's correct internal IP address.
View 3 Replies View RelatedCisco WAN :: 1921 - NAT On A Single Router With 2 WAN Interfaces?
Mar 17, 2013I have a 1921 with 3 interfaces. One for the LAN and the other 2 are wan each with a public address. The 2 wan interfaces are used for redundancy. I would like to know how I can static nat the same port and inside address on both wan interfaces.So if the request comes in on one or the other it works. I know if I do a static nat to one of the wan interfaces and then add the same port and inside address to the other wan interface it replaces the previous configure.
View 5 Replies View RelatedCisco WAN :: Gigabit Ethernet Does Not Come Up On 1921 Router
Aug 14, 2011i have a cisco 1921 router and it has ge0/0 (LAN) and ge(0/1) WAN. ge 0/0 is well connected and i can ping it and the LED light is on but ge 0/1 has failed to come up.Ge0/1 is connected to an IDU and has a public IP address. The LED light also does not light on ge 0/1.Where could the problem be?
View 5 Replies View RelatedCisco WAN :: Monitoring Temperature On 1921 Router?
Feb 9, 2012how do I monitor temperature of my 1921 router? Which commands do I need to put on router and which MIBs to use. I am using PRTG network monitor as a monitoring system.
View 10 Replies View RelatedCisco WAN :: 1921 Router - CD Light Flashing On V2 T1 WIC?
Apr 26, 2012I have a 1921 router with a V.2 T1 wic installed connected to a MPLS circuit. The circuit is down hard and the CD light is flashing. We reseated the WIC card and the circuit recovered for about 30 seconds, then went down and CD began flashing again on the WIC. AL is solid.
View 1 Replies View RelatedCisco WAN :: How To Access Web GUI Management - Router 1921
Dec 17, 2012How do I access the router's web gui management? I already enabled the ip http server and ip https commands. I have a username and password configured
I open a browser session with the ip address:URL, But I do not get the management GUI. I haven't used the GUI in many years,
Cisco Systems
Accessing Cisco CISCO1921/K9 "my-router"
Show diagnostic log - display the diagnostic log.
Monitor the router - HTML access to the command line interface at level 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
Show tech-support - display information commonly needed by tech support.
Extended Ping - Send extended ping commands.
Cisco VPN :: 1921 Router Q - How Many IPsec Tunnels Will It Support
Nov 8, 2011I need to know how many IPsec VPN tunnels one Cisco1921 can support reliably. Haven't had any luck sifting through documentation on the web.
View 2 Replies View RelatedCisco VPN :: 10 Minute Time Out WebVPN On 1921 Router?
Jun 9, 2013We have a 1921 router that has WebVPN (Any connect) enabled on it as well as IPSEC. When a user logs in using IPSEC client they stay connected no issue. IF you connect using Any Connect it will disconnect you after exactly 10 minutes. Never a second more or less. I ran some “debug webvpn” and the disconnect looks to be a planned event and reports no error it just sends the disconnect command. However, if you watch the buildup you get the following message from Debug.
003960: Jun 7 09:09:06.833 NewYork:
003961: Jun 7 09:09:06.833 NewYork:
003962: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] CSTP Version recd , using 1
003963: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Allocating IP 172.18.249.50 from address-pool IPRange1
003964: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Using new allocated IP 172.18.249.50 255.255.255.255
003965: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Full Tunnel CONNECT request processed, HTTP reply created
[code]....
The highlighted entry is a session timeout set for exactly 10 minutes. I cannot find how to change, remove, or modify this setting. Google has failed me in my ability to find this timeout setting.
Cisco WAN :: 1921 Forgot Router Password How To Retrieve
Apr 11, 2011Have a cisco router 1921 ,version 15.0,configuration register is 0x2102 and did not remember the password try to solve by GW-RTR>confreg 0x2142 give error translating "confreg"....domain server (196.46.100.2) (196.46.104.2) %Bad IP address or host name translating "confreg"....domain server (196.46.100.2) (196.46.104.2) %Unknown command or computer name, or unable to find computer address also tried this GW-RTR>confreg 0x2102 give error translating "confreg"....domain server (196.46.100.2) (196.46.104.2) %Bad IP address or host name translating "confreg"....domain server (196.46.100.2) (196.46.104.2) %Unknown command or computer name, or unable to find computer address what are the way forward to get to default settings?
View 2 Replies View RelatedCisco WAN :: 1921 Router Performance With 2Giga Ethernet Port
Jun 14, 2012What is the Cisco 1921 router performance if connected with 2 Giga Ethernet port? What is the performance if enable GRE tunnel ?
View 2 Replies View RelatedCisco WAN :: After Installing Data License In 1921 Router It Does Not Show?
Dec 13, 2011 i installed Data license(Evalutation) initally it took the license after reload, when i enter sh lic command the out put shows that Data license is installed and valid for...
But when i run sh ver command it only shws ipbase license and not the data license