Cisco Wireless :: 5508 - MSE Running 7.0.220.0 Work With WCS-standard-K9-7.0.240.0
Apr 10, 2013Can MSE running software 7.0.220.0, work with WCS runing WCS-standard-K9-7.0.240.0 and WLC 5508 running AIR-CT5500-K9-7-3-112.0 ?
View 1 Replies
ADVERTISEMENT
Cisco :: Disable G Wireless Standard On Single WLAN WLC 5508
Mar 17, 2013We have some older Honeywell Dolphin 7900 Series Handhelds that have issues with wireless communication. Very unreliable communication. One recommendation from Honeywell is to disable the G standard and only allow B. Basically have a WLAN that is solely b radio enabled. I see that their are options to go B/G only or A only, but no options in the radio policy to go B only.
We are using WCS 7.0.240 and the controller is a WLC 5508 running the same code revision.
Is this doable on a single WLAN while leaving G available on other WLAN's?
Cisco :: LMS 3.2 VM Machine Running Windows 2008 Standard Edition
Nov 6, 2012We're installing LMS 3.2 on a VM machine running Windows 2008 Standard edition (64 Bit).
You cannot install CiscoWorks LMS 3.2 application(s) on an unsupported operating system or when Terminal Services is running on the supported Windows 2003 Server Standard Edition, Windows 2008 Server Enterprise Edition,Windows 2003 Server Enterprise edition, and Windows 2003 R2 Server Platforms. The setup program will exit when you click ok.You must either upgrade the operating system on the server to a supported version or install LMS 3.2 application(s) on another server that runs a supported operating system.
I've disabled all RDP sessions and ANTI-Virus Software.The documentation states 2008 server Standard (64 bit) is supported.
Internet Does Not Work On Standard Account?
Sep 6, 2012Tech Support Guy System Info Utility version 1.0.0.2[CODE]
View 6 Replies View RelatedCisco Wireless :: WLC 5508 Running Version 7.2 - Redundancy
May 1, 2012I have 2x WLC 5508 running version 7.2. 1st one is setup and running. My questions is: If I want to setup Active-Passive redundancy, do I need to manually setup the 2nd one exactly as the 1st one and put them in the same group? Or is it a way to copy all of the configs I made on the 1st one over to the 2nd one?
View 4 Replies View RelatedCisco Wireless :: 5508 - Running Ethernet Cable From The WLC To Switch
Feb 6, 2013I have a situation where my Cisco 5508 did not come with SFP by default.
Can i use the SERVICE PORT to connect the WLC to the Switch
1. the controller has 8-SFP Slots
2. one service Port
3. On redundant Port
Cisco Wireless :: Using 5508 Controller With ACS Appliance Running Version 4.1 Or 4.2?
Apr 1, 2013using a Cisco 5508 controller (code version 7.4.100.0) with an ACS appliance running version 4.1 or 4.2?I've found that the ACS constantly reports a 'Bad request from NAS' (Invalid message authenticator in EAP request). message. This usually indicates a mismatched shared secret but this isn't the case.The controller works fine opposite a Microsoft NPS Radius Server.
View 6 Replies View RelatedWireless Doesn't Work When Other Laptop Is Running Beside Mine
Nov 17, 2011Whenever some other laptop in my room is using internet with its wifi my wifi stops working. I checked my ping when no laptop was using wifi that its runnig quite smoothly. But as soon as my room mates laptop gets connected to the same network my ping gives me output that "Request timed out".
View 2 Replies View RelatedCisco :: WLC 5508 - Possible To Anchor To 4402 Running 7.0.116.0
Apr 23, 2012We are deploying two 5508 WLC running 7.2 ios. Is it possible to anchor these to a 4402 running 7.0.116.0. Is there any version mismatch issues. We can find documents on the older compatibility but not on the new code.
View 9 Replies View RelatedCisco Wireless :: 5508 Clean Air Feature Does Not Seems To Work
Jun 3, 2012I have a dual 5508 controller /NCS deployment. I deployed my first clean air AP today, a 3502I.
The Clean Air feature does not seem to work, however. "No information is available because CleanAir is disabled or otherwise not available for this radio. If no information is available and CleanAir is enabled then you can try rebooting the AP XXXX".The thing is that CleanAir is enabled on this AP.
Cisco Wireless :: 602AP Does Not Work Correctly With 5508 Controller
Aug 16, 2011Does Cisco 602 office connect AP working correctly with a 5508 controller? As cannot get it to work as having random problems. Ie I see the SSID broadcast on the AP, but no authentication messages for clients on the controller.I have the same configuration setup on a 1142 office extend access point and works fine.The other 602AP i have is seen by the controller, but will not even broadcast the SSID.
View 3 Replies View RelatedReplace Standard Modem With Wireless?
Sep 26, 2011can you replace the standard wired modem provided by your ISP with a wireless/wifi modem yourself?
View 4 Replies View RelatedCisco WAN :: Running All Switches Running By Default Configuration And Connected To WS-C4506
Jun 11, 2013I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies View RelatedCisco Firewall :: Configuration Migration From ASA 5540 Running 7.2 To 5525X Running 9.1
May 7, 2013I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies View RelatedCisco WAN :: 881 To Use Ntp As Standard Feature
Nov 25, 2012I can see that the Cisco 881 does not have NTP as standard, but can this feature be used anyway with the latest software upgrade?
View 4 Replies View RelatedUpgrade From G To N Standard?
Oct 3, 2011dell xps m1530 i have a Intel� PRO/Wireless 3945ABG Network Connection and i want to upgrade it to N standard which model of intel minipci network will fit to my dell?
View 4 Replies View RelatedSpecifying Which Version Of 802.11 Standard To Use
Oct 25, 2012Is there a way that I can specify which version of the 802.11 standards I can use.e.g. I have an 802.11 B/G/N wireless card and I want to test each on a directional antenna to see how they perform
View 4 Replies View RelatedLinksys Wireless Router :: WRT600N Standard Verizon Router Doesn't Have N Capability
Apr 6, 2012The standard Verizon router doesn't have Wireless N capability, so I got the WRT600N (first floor) a while back and connected it to one of the ports on the Verizon router (basement). I have the wireless turned off on Verizon router. My problem is that anything connecting to the WRT600N has extremely intermittent connectivity.
View 1 Replies View RelatedWhat's The Standard Protocol To Transfer R2 To SIP
Apr 19, 2011what's the standard protocol to transfer R2 to SIP?
View 1 Replies View RelatedCisco :: Difference Between Custom And Standard Discovery In LMS 4.2
Oct 22, 2012whats the difference between custom and standard discovery? There´s a line on the help page: "The Use Policy Configuration Settings radio button will be enabled only after adding a Default Credential Set Policy."The radio button is not enabled although I´ve two default credential sets and two default credential sets policy configuration.
View 1 Replies View RelatedCisco :: LMS 3.2 And Window Server 2008 R2 Standard
Jun 23, 2011We have bought lms 3.2 and window server 2008 r2 standard. Now we know, it cant be used together Could we upgrade to lms 4.0.1 ? If so, how can we do ?
View 2 Replies View RelatedHow To Connect Standard TV To Cable Modem
Apr 13, 2011I wanna subscribe to Internet TV. To watch it on computer screen I need to log in to the site where I registered, i.e. enter my login ID and password. But I want to watch it on my TV WITHOUT my PC. I realize that I have to buy a TOP BOX , connect it to TV and to cable modem. The question is how the TOP BOX knows my login and password to pass it to the site through modem.How do I enter it to tob box?
View 2 Replies View RelatedServer 2008 R2 Standard Install
Apr 19, 2011Can I install win2008r2 standard to a 500gb usb ultra portable harddrive and connect it to my net book and run it ? I am studying for the MCITP and want to use it for that purpose?
View 3 Replies View RelatedCannot Get Any Of The Standard Ports Open On Computer
Jun 2, 2011why I cannot get any of the standard ports open on my computer. I have run ESET firewall/antivirus, but have it temporarily disabled. I have windows defender disabled. I have the correct ports open/bypassed through my linksys router, but still am having network trouble.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Enterprise , 64 bit
Processor: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 6135 Mb
Graphics Card: ATI Radeon HD 4800 Series , 1024 Mb
Hard Drives: C: Total - 953866 MB, Free - 610614 MB;
Motherboard: ASUSTeK Computer INC., P6T DELUXE V2, Rev 1.xx, MS1C96B19100148
Antivirus: ESET Smart Security 4.2, Disabled
Adding Non Standard Device To Network?
Oct 18, 2011I have a machine which is connected to a PC using an ethernet cable to communicate information between the machne and computer.I am told that the machine uses the MAC address to communicate and the computer just needs an ip address in the same range as the machine and software aware of the machine's MAC address. Why I can't connect it though the network, I tried the manufacturer who couldn't explain
View 4 Replies View RelatedCisco Switching/Routing :: 10.2.2.2 / Can Use Standard ACL In Route-map For BGP Fall-over
Jan 22, 2012I haven't got time to test different configurations yet. Just want to quickly ask here about the fall-over route-map configuration. I saw lots of example using pip prefix-list to specify the next-hop for tracking. Is that the only way you can do it? Can you just use a standard ACL to specify that host like permit host 10.2.2.2? ip prefix-list will do like ip prefix-list seq 5 permit 10.2.2.2/32. And you apply the prefix-list to route-map then. ACL will work?
View 2 Replies View RelatedCisco Switching/Routing :: 3750 / MST Pre-standard And Links Down
Sep 3, 2012Checking the logs we have seen the following messages:
%SPANTREE-3-PRESTD_NEIGH: pre-standard MST interaction not configured (Port-channel3). Please, configure: 'spanning-tree mst pre-standard' on ports connected to MST pre-standard switches.
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel3, changed state to down
%LINK-3-UPDOWN: Interface Port-channel3, changed state to down
%LINK-3-UPDOWN: Interface GigabitEthernet1/0/1, changed state to down
%LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to down
When this happened, the interface that was actually blocked by STP didn't come to forwarding state, and as a result this switch became isolated.This switch is connected to a switch that runs standard MST, and to some switches that run PVST but have bpdufilter enabled as we don't want them to participate on the STP. It is a 3750 switch with software version 12.2(55)SE5.
As far as I knew, when a MST pre-standard BPDU was received, the interface was able to receive more pre-standard BPDUs, but I didn't know it would turn the link down. Why the links went down, and if there is any way we can configure those links to accept only MST standard BPDUs.
I would also like to know if there is any chance a switch running PVST can send a MST pre-standard BPDU if it has a software version 12.2(25)SEE3.
Add New DMZ Zone To Network With Standard 1941 (1x LAN / 1 X WAN Port)?
Jan 2, 2012I am looking to add a new DMZ zone to our network with have a standard 1941 (1x LAN / 1 x WAN port) and so I need a 3rd routable L3 interface to create the DMZ.
Is the HWIC-1FE what I am looking for or is there another way to do this?
Networking :: SBS 2003 Migration To 2008 R2 Standard
May 15, 2012I have a client who does not use exchange, and doesn't need any of the SBS features.Their server is aging and are running out of disk space.
I'm in the process of building them a new file server and am considering using Server Standard 2008.I am even going to take them off the domain and make their server strictly a file server for Peacthree. It is the only reason they even need a "server".
Cisco Security :: NAC 4.8.3 Supports Windows Server 2008 R2 Standard?
Jan 24, 2013I´m looking at this document: [URL] and I´m not clear if Windows Server 2008 R2 Standard with SP1 is supported. The documentation refers to Windows 2008 Server SP2 and Windows 2008 Server R2, but I see no specific mention to Windows Server 2008 R2 Standard with SP1.
View 0 Replies View RelatedCisco Routers :: RV042 - QuickVPN Versus Standard VPN Client
Nov 15, 2011I have a RV042 router setup with Client to gateway VPN access, and am connecting with a W7 PC running QuickVPN. We have many PC's that already have the standard CiscoVPN client on them, is it possible to configure the RV042 to allow these clients to conenct? I'm not sure how to get the Mutual authentication to work, or how to import the PEM certificiate into that client. It seems to allow it to import, but I can never select it.
View 2 Replies View RelatedCisco Switching/Routing :: To Get CbQos On Asr 1002s With Standard OIDs
Jul 3, 2012I would like to get CbQos on a Cisco ASR 1002S (IOS-XE Software (PPC_LINUX_IOSD-IPBASEK9-M), Version 15.1(1)S1). With the standard OIDs (cbQosIfIndex - 1.3.6.1.4.1.9.9.166.1.1.1.1.4).
View 3 Replies View RelatedCisco Switching/Routing :: Create Vlan On Standard 3925?
Apr 11, 2012Is it possible to create a vlan on a standard 3925? We have no addon cards installed.
View 3 Replies View Related