Cisco Wireless :: NCS / Prime 1.2 Search Error
Oct 10, 2012
On our NCS and now also on our recently upgraded Prime 1.2 we get the following error when doing a simple search in the search window at the top right of the screen:
There was an error while parsing and rendering the content. (Tried to register widget with id==mseLicenseInfoDialog but that id is already registered) This occurs whichever role you log in as and only happens on teh simple search, when using teh advanced search we do not see it.
View 5 Replies
ADVERTISEMENT
May 9, 2012
I have a problem where occasionally a user will attempt to login and the LDAP search will find the user but then fail when it does the group search. The error I get is below
22037 Authentication Passed
22023 Proceed to attribute retrieval
24032 Sending request to secondary LDAP server
24016 Looking up user in LDAP Server - testuser
24004 User search finished successfully
24027 Groups search ended with an error
24034 Secondary server failover. Switching to primary server
24031 Sending request to primary LDAP server
24016 Looking up user in LDAP Server - testuser
24004 User search finished successfully
24027 Groups search ended with an error
22059 The advanced option that is configured for process failure is used.
22062 The 'Drop' advanced option is configured in case of a failed authentication request.
Some users never get this error, others will get it once in a while and I have one user that gets it every time they try and login.
View 3 Replies
View Related
Aug 28, 2012
When I run installation process I have received unexpected error:I have windows 2008 R2 x64. Antivirus is disabled and I have administrator privilege.
View 6 Replies
View Related
Jun 12, 2012
We are getting the below mentioned error while installling Cisco Prime LMS 4.2.1 evaluation version on WIndows 2008 Enterprise R2.We tried installing on a high end VMware server .Prerequisites are all taken care by us.We are getting a LMS installation abort log saying that Swap space is not configured properly even after increasing the Paging size to 32 GB.Our physicalmemory is 16 GB.Hard drive has 2 partitions,one is 35 GB and other is 200 GB.
View 3 Replies
View Related
Aug 23, 2011
ive just installed Cisco Prime LMS 4.1 on a Windows Server 2008 machine. when i try to open some features. like topology or the VLANs configuration options in the configuration menu i get the error HTTP STATUS -500 and this:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
[code]....
View 10 Replies
View Related
Dec 26, 2012
After a successfull installation of NCS 1.2 into a vmware environment and run the setup I have the following error while trying to start or to have a status for NCS (ncs start ot ncs status):sh: /opt/CSCOlumos/bin/wcsadmin.sh No such file or directory
View 10 Replies
View Related
Mar 8, 2013
I have done new configuration for CPI 1.2. while i tried to start service i got belw error. [code]
View 3 Replies
View Related
Dec 4, 2009
i just got a new computer and just got windows 7 for it. I was installing my wireless adapter when the error 211 came up. I saw on your website how to manualy install it but i cant do the first step which is: Search and download Windows 7 driver for your Adapter. I cant do this because i cant get on the internet on that computer without a wireless adapter because it is to far away from my routor. What can I do?
View 3 Replies
View Related
May 9, 2013
I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
View 2 Replies
View Related
Mar 12, 2013
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
View 4 Replies
View Related
May 23, 2012
We have a lot of 6913's handling our office ports and I'd like to know a simple way to find multiple ports knowing their description.
I'm use to Juniper so if I were looking for the 8 ports for the office's 3190-3199 I would type something similar to:
show | display set | match 319
I know I can use | include with a show run on Cisco but that won't pull the interface just the description.
View 11 Replies
View Related
Oct 7, 2011
Unsure if this is the correct forum but here goes.....I just installed the Google Chrome and after doing so it has been a hair pulling problem so to say. Now when I do a search with google almost every time it looks like the information site listed I click on it and am redirected to another search and if I try to go back to google search it will not let me off the page. I end up having to close that window and open a new window and research again on google. I open my old internet explorer and the same thing happens there now.
View 2 Replies
View Related
May 9, 2012
My network name is AKY and I lost my password.
View 1 Replies
View Related
May 4, 2011
I want to search hidden ssid names means non broadcast ssid.
View 2 Replies
View Related
Dec 30, 2012
I have windows 7. Search engines worked fine when first used, now all I get are errors, With IE9 and Firefox.
View 1 Replies
View Related
Feb 27, 2011
A few days ago, all search engines stopped working on my computer on both IE and Firefox. Everything else works fine and I can surf the net using specific URLs but I can search for anything. I have tried a number of options and various anti-virus, spyware and malware scans but no infections are ever found. I have used, AVG, windows defender, and Malwarebytes.
View 16 Replies
View Related
Oct 16, 2012
I run an Allen & Heath digital mixer. The iDr32 mixrack sits on the stage and has a 2 port Ethernet switch on board, which allows the device to be controlled with a PC. If you then add a WiFi router then you can have wireless remote control from a laptop. Allen & Heath also sell an app for iPad to do the same. I have this working quite well although I am receiving no metering data from the Mixrack. Allen & Heath say this is probably because my router does not support multicasting. They list some routers which are recommended, but the list is rather out of date. I am trying to find a suitable dual band router with decent range on both bands. I would prefer a cable type, but since it will not be connected to the internet, it isn't important. When I Google "Multicast capable wifi router" all that comes up is a lot of stuff about video streaming. None of the manufacturers seem to list if their product supports multicasting. I understand that multicasting is usually used for video streaming, but in my case it seems to be a requirement to speed up data between the iPad and the Mixrack. Apparently some users of similar systems have encountered problems with multiple smartphone users in the audience seeking WiFi connections. The solution to this is to use 5GHz band, and switch off the SSID. Some have also found it best to use MAC filtering for security.
View 4 Replies
View Related
Dec 8, 2011
I use a MS-6728-090 (865PE Neo2p) and can't find the right driver for the onboard lan.
View 1 Replies
View Related
May 4, 2010
I have a DIR-601 and I'm trying to play the IOQuake3 game Urban Terror (UT). Every time I try to get a list of servers the DIR-601 stops and reboots.What is that? Flood protection? Something else?
View 4 Replies
View Related
Feb 28, 2011
Since I updated a Catalyst 2960 switch to IOS version 12.2(55)SE1 I can't do searchs by MAC address, when I do "Monitor->Search" the following error appears:"The software version of the selected switch does not support some of the CLI commands in read-only mode for this window. You must have read-write access to this switch to display complete information in this window" If packets are captured you can see that the issued command by the CNA host is "GET /exec/show/mac-address-table/", the answer from the switch is:"show mac-address-table ^% Invalid input detected at '^' marker.
If I do "Configure->Switching->MAC Address" instead I get the mac address-table correctly. In this case the issued command is "GET /exec/show/mac/address-table/dynamic" and no error is displayed, the answer from the switch is the list of mac-address table.
View 4 Replies
View Related
Mar 25, 2012
Just setting up and testing a Cisco 891-K9 router. Used CCP for basic setup, figure I'll tweak any settings needed later.For the firewall, I chose the default "medium" security setting in CCP, then added some holes (already setup in NAT) for outside access in.
Now on to the real question:I noticed that I am now unable to click through google search results. On any borwser. Clicking on any search result simply loops back around to the same google search page. If I disable Javascript on the browser, everything works as expected. So it appears that the firewall is preventing something in google's scripts from redirecting and "clicking through" to the final destination page.
I'm familiar with our old Pix firewall commands, but still a relative newcomer to the zone based firewall and commands for this new 891, (relevant Config pasted below) (Gi0 is the WAN interface)
!
!
multilink bundle-name authenticated
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
[code]....
View 2 Replies
View Related
Oct 29, 2011
I have downloaded material to a site many years ago and now that site appears first when my name is typed at Google Search. The problem is that I've written many e-mails to the site manager and he is not answering. Is there any way to delete this site from my Google search?
View 2 Replies
View Related
Sep 10, 2012
I work on photocopiers and sometimes I get an error code that's not in the service manual.[URL]contains some useful information so I use Google to search the forums for example:It has recently stopped working on my computer and another at work. Copytechnet loads breifly then windows says unable to connect to site and internet explorer closes.
View 1 Replies
View Related
Jun 21, 2011
I have a small business network computers w/a linux server. One computer was infected with viruses which I removed via kaspersky/norton/malware anti-bytes. I run windows xp professional on this computer.However I run into the following problem:
1) In my network places the documents on the server do not show as a network place-this is despite me being able to access these documents via a folder shortcut
2) After I open the network files/folders from the comp, I am unable to use the find feature because the folder is not listed under the look in drop box. I tried changing workgroups and ran into the same problem.
View 10 Replies
View Related
Jan 25, 2011
"Can't find certificate-wireless". I've applied all the suggestions. With and with out Winduh Zero Config and network adapter software. Unchecked 802.1x, changed ecryption types, modem and computer reboots, push little button on back of modem, tried two differnt makes of network adapters, confirmed correct network key typed, etc. All these things in many combinations. Great full signal, no certificate or with software installed no connectivity. Is it time to Ethernet hard wire my network? Is it the Windstream 1704 modem? Studied and tweaked the modem settings a little
View 7 Replies
View Related
Mar 4, 2013
Purchased a dlink DIR-601, hardware version B1, currently updated to firmware 2.01NA, internet connection works fine, but any time I visit a page that has 404'd I get redirected to [URL] any misspelled url brings me to url...I can't find options anywhere in the config to turn this feature off, it's annoying and intrusive.
I never saw any type of redirection with the old netgear router I replaced, I've tried turning off advanced DNS, no luck. Seems to me it's a feature built into the router, and so, how do I disable it?
View 3 Replies
View Related
Aug 25, 2012
My google search has recently stopped working in both IE and firefox. When i search bing or yahoo they work just fine. I have tried using google.com an also tried using the toobar on my computer.
View 6 Replies
View Related
Jul 10, 2011
I tried to upgrade to 2.05NA several times and there always ends up being an issue that support is too sad to give the correct answer to and just puts a consumer thru "jumping thru hoops" and getting nowhere.2.05NA (actually started with 2.03NA) first caused a problem with limiting my upload speed to 1024mb. I happened across the fix on another forum and tried it and it worked. It was the default QoS setting D-Link changed after version 2.02NA and refuses to release a new firmware to fix this for everyone. Why they don't release a new FW that fixes the issue but keeps things promised on the package working is beyond me. Now, I purchased a D-Link DNS-323 and I finally got drives to fill it some time back. If 2.05NA is loaded, the Easy Search Utility will not connect to the NAS. I have tried the version the NAS came with AND the latest version offered. It will see the NAS upon 1st launch of the latest Easy Search Utility, but it will not connect and then it disappears if you relaunch the utility and won't return until a reboot. Bottom Line: it will not connect with 2.05NA loaded. It works fine with 2.02NA.
What is the setting that D-Link has screwed over here also that is causing this problem? It is pretty sad that their own hardware items won't play well together unless you run old FW. What setting D-Link changed that is making the D-Link DIR-825 not connect to the D-Link DNS-323 NAS when the DIR-825 has 2.05NA loaded. I have a DIR-825 Rev. B1 and a DNS-323 NAS with its latest firmware. I am using 2.02NA on the router since that is the only one that works and is the latest stable release(other than the DHCP reserve issue), no matter what D-Link wants to try to make people think. I won't try their support since they NEVER did give me the fix for the QoS upload issue and when I asked them to put it as a sticky in this forum when I found the answer somewhere else....well, there is no sticky as we all know. I would like to be able to have the DHCP Reserve issue working too, but I would like to connect to my NAS more at this point.
View 6 Replies
View Related
Feb 29, 2012
I have just installed and configured a new RVS4000 with VPN (currently running firmware V2.0.0.3), and have enabled the DHCP Server service. I wanted to be able to distribute a search domain in addition to the IP address and DNS Server information (as I have done with other devices that include a DHCP Server), but cannot seem to locate where or how I might do that with the RVS4000.
View 4 Replies
View Related
May 19, 2013
How do I add the MSE 7.4 VM to Prime 1.3.20?
The Prime uses https or http when trying to add the MSE. But those ports are closed on the MSE. The MSE seems to expect traffic on tcp 8001.
We did not change the default NCS-username/password in the startup-wizard.
C:WindowsSystem32>nmap 192.168.0.211
22/tcp open ssh1099/tcp open rmiregistry1521/tcp open oracle8001/tcp open vcom-tunnel9001/tcp open tor-orport9002/tcp open dynamid
[Code]......
View 5 Replies
View Related
Jun 3, 2012
My Internet Explorer will not save settings/changes to highlight color of viewed pages in search results. It will not highlight search pages that have been viewed at all. I have Internet Explorer 9 & Windows 7 - 32 bit on a Dell Inspiron 1545. I have uninstalled & reinstalled Internet Explorer 9. Above mentioned application did not work on either Internet Explorer 8 or 9. I have cleared all cookies, deleted all temp. internet files, optimized disc space twice & done a Full scan w/ my Norton. I go to color setting under Internet Explorer make the changes & hit each "OK", but the changes don't take. The "Apply" button is recessed and is not functioning. This has been the problem for approximately the last week and 1/2, before that color highlighting function was working. This color highlighting feature of viewed pages does work in Mozilla fire fox, but that is not what I want to use.
View 1 Replies
View Related
May 26, 2013
What are the configuration required on ISE to integrate with Prime 1.3.0.20?,On PI side, I have added ISE in the below path.Design-> External Management Servers -> ISE Servers.
Apart from this anything else to be done on ??
View 4 Replies
View Related
Jan 20, 2013
We are going to implement high availabilty in 5508 WLC with version of 7.3.101 . We will be using Prime infrastructure 1.2 for monitoring purpose.With Prime, whether we can monitor and manage redundant WLC also or only active WLC?.
View 3 Replies
View Related
