Cisco Wireless :: To Download Configuration File Of WLC 4400
Jul 22, 2006If already saved the configuration file of a WLC 4400 to a server using TFTP? What is the name of the configuration file?
View 2 Replies
ADVERTISEMENT
Cisco Switches :: File Extension For Download Backup Configuration Sg300-10
May 7, 2012i want to download an backup of the configuration file of my Cisco sg300-10 but do not know what to call the file extension.. backup.??? backup.img? backup.ros ?
View 4 Replies View RelatedCisco Wireless :: 4400 - LAN Controller (WLC) Configuration Best Practices
May 19, 2013I'm looking for a document that states the best practices for WLC configurations (Management/Security/AP's..etc). I can currently only find the following document:URL
But this document has last been updated in 2008, in a few days that's almost 5 years ago, and we all know how quickly technology is evolving. 10Gb wireless is around the corner, with 1GB starting to go production now. This document also mentions the 4400 (which is end of life).
Cisco Wireless :: WLC 4400 Need To Change On Configuration For Others To Join Properly
Apr 3, 2013We have installed a WLC440 at a school with 30 1131 APs. Only 3 showed up under Wireless tab, and others became rogue APs. Where and/or what do I need to change on the configuration for others to join properly? Have matched the configuration on this WLC with other WLC at the other schools, and still not able to find out where the problem is.
View 6 Replies View RelatedCisco :: 4400 - Cannot Copy Configuration From Controller To WCS
Feb 22, 2011When I try to import configuration from the controller 4400 to my WCS it gives the following message:
Status Refresh succeeded but some records were dropped because their key fields failed validations.
When i see the config in the WCS, all of my light access points are not on it. I check for the logs and this is What I get: (its a lot of info, so I am putting an example!)
02/23/11 14:18:46.784 ERROR [general] [TP-Processor7] THROWcom.cisco.server.common.errors.InternalException: [COMMON-1]: COMMON-1com.cisco.server.common.errors.ObjectNotFoundException: COMMON-
[code]......
Cisco Firewall :: Fails To Download File Through ASA5540
Dec 12, 2011We have ASA 5540 with 8.2 SW. We are trying to download a file (3 MB pdf) from https session which fails if done behind the firewall. In case, the client bypasses firewall, the file gets downloaded as usuall. Interesting thing here to note is that when client is behind the firewall, its takes a long time to download the file and the file size always 312 Bytes, of course its a corrupt file.
View 3 Replies View RelatedSharing :: Download A File That Was Interrupted While Downloading?
Jul 11, 2011while downloading .avi file from internet, the connetcion got disconnected and the download could not be completed. How to locate that incomplete file in my computer and also is it possible to download the file from where it was disconnected?
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 Upgrade - Wrong File From Software Download?
Mar 24, 2011i try to upgrade acs 5.2 with the patch 5-2-0-26-1.tar.tar.Firstly it is not the correct extension when downloading the file from the download software area.then when I enter "patch install 5-2-0-26-3.tar.tar FTP" I get the following error message:
% Manifest file not found in the bundle
I believe the file is not corrupted.
Slow File Uploading With Normal Download Speeds?
Jul 12, 2012I am having difficulty uploading files on the internet because the speeds are so slow. My download speed is 23.88 MBPS, bu upload is .3 mbps. This seems to be a recent problem. The other computers on the network get upload speeds of 5mbps and do not have any problem, so I think there is some problem unique to this computer, and not a network problem. I can't back up my files because the speed is too slow.
View 8 Replies View RelatedCisco Wireless :: How To Take Backup Of Configuration File For WLAN Controller 4420
Nov 4, 2012I need to take the backup of configuration file for WLAN Controller 4420, I tried all the possibilities given in the documentation but the backup fails, I have main confusion with the file name to be backedup, i am not able to findout the configuration filename any where even when i use CLI?
View 1 Replies View RelatedCisco :: RME 4.2 Can't Get Configuration File From ASA5520
Aug 10, 2010I have a problem with RME 4.2 from CWLMS 3.1. I have configured SSH in my asa 5520 device but RME can't get the configuration file. I ran a job to sync archive but i get this message error:
*** Device Details for ASA_5520_VOZ_01 *** Protocol ==> Unknown / Not Applicable Selected Protocols with order ==> Telnet,TFTP,SSH Execution Result: CM0062 Polling ASA_5520_VOZ_01 for changes to configuration. CM00 Polling not supported on
[Code].....
Pulling Configuration File From HP 2900-48G?
Jan 3, 2013is there a way to pull the config file from this? I tried looking through console mode, but was not able to find an option for it. Or is it just not possible?
View 1 Replies View RelatedCisco Security :: ASA5520 How To Remove Configuration File
Jul 15, 2007I want to put the asa5520 to the factory default please let me know how to do that. how to remove the configuration file from it.
View 5 Replies View RelatedCisco Routers :: RV082 V3 - View Configuration File?
Feb 27, 2013Currently, the backup config is not human readable...any way to convert this?
View 1 Replies View RelatedCisco WAN :: 2950 Switch Receive Configuration File From ISP?
Aug 28, 2012At home I have a perfectly working test setup for more than 1 year now , but yesterday we had a power down for about 10 minutes in the whole area , after this power down nothing was working in my network any longer.
My Network is has follow :
ISP(Cable Modem) on FA23 from the CISCO 2950 SWITCH (24 Ports)
ROUTER (ON A STICK) on FA24 from the CISCO 2950 SWITCH
And the rest of the switch is FA1=VLAN 1; FA2=VLAN 2;FA10=VLAN 10
Our home network is connected to VLAN 10 with a IP Range of 192.168.10.x /24 After this power down , I was not able to look into the SWITCH via FA1 , the FIX IP in this switch was 192.168.1.251/24, the ONLY way to get access was via the consol port !!!What a suprice when I connected my consol to the PC , I can see ROUTER_F342 , my router config is called ROUTER1841 and my switch config name is /was called SW24.So it seems that after this Power Down , the router took or received a config from my provider ?!?
I have recovered the the file in the switch + the vlan.dat and now everithing works again.
How can I avoid that this switch receive again a wrong file , I have all the needed files on the products itself and I do not use a TFTP server.
I have atached some screen shot when my switch is starting up , and it seems that the switch receive a IP address from my ISP , I do not know why, in the config file I have given it a FIX IP 192.168.1.251/24 ?!?So it seems that my ISP erase the config file and when the switch is empty ,the swich look for :
tftp://255.255.255.255/router-confg
tftp://255.255.255.255/ciscortr.cfg
Etc ....
Until it find something.
I have tried after a complete recovery to switch off the power again for 10 minutes (ISP MODEM + SWITCH + ROUTER) and I was not able to reproduce the fault.Can it be that due to this power failure in our area that some routers or switches send or broadcast this kind of things ?
Copying Configuration File To Usb Storage Device?
Jul 6, 2012How do i copy the configuration file from a switch to a storage device (USB)
View 1 Replies View RelatedD-Link DIR-655 :: What Is The Path Or File Name For Saved Configuration
Mar 15, 2011What is the name or path for the file stored on your hard drive for the configuration settings?
View 7 Replies View RelatedD-Link DIR-825 :: Possible To Load Configuration From Saved File
Nov 10, 2011Is it possible to load the configuration from a saved configuration file from a DIR-625 to a DIR-825? If so, what steps are required?
View 1 Replies View RelatedCisco Application :: ACE 4710 Getting Configuration Download Failure
Jan 22, 2013I have Ace 4710 version A4.1.1 and I am experiencing interesting problem with GUI and SSH reachability. I am unable to connect to management vlan3000. Interesting is that I can ping from ACE to network but unable to ping or SSH or HTTPS to ACE. Everything seems good. ARP is ok, switch is OK, line is up, protocol is up. Management is enabled for icmp, https, ssh to any.
When I do show interface I noticed line Config download failures : 9.
Hardware type is VLAN MAC address is 00:1e:68:1e:bc:db Virtual MAC address is 00:0b:fc:fe:1b:01 Mode : routed IP address is 10.168.0.18 netmask is 255.255.255.128 FT status is active Description:Management VLAN MTU: 1500 bytes Last cleared: never Last Changed: Mon Jan 21 16:48:54 2013 No of transitions: 5 Alias IP address not set Peer IP address is 10.168.0.19 Peer IP netmask is 255.255.255.128 Assigned on the physical port, up on the
[Code] ....
Cisco :: Save Configuration File On 2960-48PST To FTP Server?
Feb 25, 2013I'm trying to save a configuration file on my 2960-48PST to a FTP server.
Unfortunately it doesn't work. What different steps I should follow ?
The software version is 12.2(50)SE5.
Cisco WAN :: 2811 / 2911 - Use Old Configuration File With New Model Directly?
Dec 11, 2012We have CISCO2811 model with VWIC2-2MFT-T1/E1 module working good over the E1 line. Since it's getting hard to find new model of CISCO2811 we decided to connect new branches with CISCO2911/K9 model (according to migration doc)
My question is can we use 2811's old config file with the 2911 model directly?
Cisco Switching/Routing :: C3750 - Running Configuration File
Aug 7, 2008We have a bunch of switches that are running fine but the running-config file is missing and we can't save the config to the tftp server. IOS is c3550-ipbasek9-mz.122-37.SE1. I've got lots of these switches running the same code that are just fine.
View 8 Replies View RelatedD-Link DIR-655 :: Restored Configuration File Has Been Uploaded In Failure
Mar 20, 2012I'm only able to restore my settings from a backup taken in July 2011. Any backups that I take, say today for example, won't restore. Any attempts to restore them is returned with "The restored configuration file has been uploaded in failure." I haven't changed my router. The firmware remains the same. I'm using Firefox, though I believe I've always used Firefox to interface with the router.
View 1 Replies View RelatedD-Link DIR-655 :: Router Configuration File Format Difference Between Rev A And Rev B
Mar 31, 2011I've owned the Rev A DIR-655 for years and have loved it, but recently it started acting up. I have a complicated setup saved as a gateway settings file (.gws). I decided to purchase a new DIR-655 for the ease of importing my settings without having to manually setup again, however, much to my dismay, the new file format for the configuration settings on the Rev B is not .gws but rather .bin. The .gws file will not import. I tried changing the file extension to .bin with hopes it might import but no luck. I also found the utility which decrypts the .gws file into .xml and used those values to manually re-enter the settings into the Rev B router, but my port forwarding is not working the same. I was wondering if there is any utility to convert the .gws file to the .bin file in order to import into the Rev B router, or if not, can I still purchase the Rev A model somewhere. The online shops I've checked do not list the hardware version.
View 7 Replies View RelatedCisco WAN :: 861 Router With Default Configuration Slow Download Speed
May 29, 2011We have a 861 router for our small office with 15 people. We have been experienced download problems for several months, but we have suspected the internet supplier to be the bottleneck as we have a new 861 router with the default configuration from the "Cisco Configuration Professional Express".
The sympton is that the download speed over http starts fast, but drops after a few seconds from 10MB/s to 3KB/s and stays there. The internet supplier came here today and made some tests. So we downloaded some huge files over the direct cable, and it was staying at constant 10MB/s. When we connected over the router it started at 10MB/s and dropped down to 3KB/s.
Is there something that has been forgotten in the "Cisco Configuration Professional Express"?
Cisco Firewall :: ASA 5505 - Download Configuration Before Resetting Password?
Mar 24, 2013I am new with ASA devices I have a ASA 5505, the former IT manager does not remember the password of it. I am just wondering do I lose the configuration on it if I reset the password?if yes, how can I download the configuration before resetting the password. and how can I upload the downloaded configuration
View 2 Replies View RelatedCisco Security :: 3310 - NAC Profiler - NetWatch Invalid Configuration File
Jul 18, 2010I'm trying to configure the NAC Profiler with a 3310 CAS Collector. In the "Edit Collector" menú, it shows all the modules as "Running", except for the NetWatch module which shows a state "Invalid configuration file (missingInternalAddress)".
I configured the eth3 interface of the CAS as a monitor interface in the Profiler (see attached image), and I tested that the SPANed traffic actually reaches that interface from the access switch. I'm using software version 3.1.0_24 in both the Profiler and the Collector.
Cisco Routers :: RV220W - DHCPv6 Prefix Delegation - Editing Configuration File?
Jan 25, 2012I am trying to configure this router to obtain an IPv6 address from my ISP who offers a dual stack IPv4/IPv6 DHCPv6 Prefix Delegation service.
I did a WAN packet capture to see the type of DHCPv6 packets the router sends to the ISP in order to obtain an IPv6 address and I saw that the router is sending DHCPv6 solicitation packets of type IA_NA i.e. for Identity Association for Non-temporary Address. However, most ISPs that offer a dual stack IP4/IPv6 service, they use DHCPv6 Prefix Delegation in which case the router is expected to send DHCPv6 solicitation packets of type IA_PD i.e. for Identity Association for Prefix Delegation.
I then downloaded its configuration file and saw the following:
dhcpv6c = {}
dhcpv6c[1] = {}
dhcpv6c[1]["renewTime"] = "3600"
[Code].....
So, the option for the DHCPv6 client to perform a prefixDelegation request is disabled. Does that mean that if I set this flag to "1" it is going to work? Well, I edited the configuration file and changed this flag but the router refuses to load it! It complains about the file being changed. How does it know that? Is it computing some type of checksum? How can I manually edit this flag and update the router's configuration?
Ratio Supposed To Be Between Download / Upload Speed In Normal Working Configuration
Jan 2, 2011What is the ratio supposed to be between the download speed and the upload speed in a normal working configuation? My webpages are taking forever to load. I used this speedtest... url...
-download speed: 7.427 Mbps
-upload speed: 0.006 Mbps
My provider is cable, Brighthouse, hooked up to their Scientific Atlanta modem and from there it is hooked up to a Belkin Connect N150 wireless router. I am not using the wireless on my laptop but am wired directly to the router. [code]
Cisco WAN :: 1841 Router - HWIC Interface Card - Cannot See Interface In Configuration File
May 9, 2012i have a 1841 cisco router and i recently purchased a 1 port HWIC wan interface card. My problem is that I cannot see the interface in my config file. Is there something i am missing?
View 8 Replies View RelatedCisco Wireless :: How To Add An SSID To AP's Through WCS 4400
Sep 24, 2012We have a new SSID that needs to be added to an AP through a 4400 Controller with software version
7.0.116.0
All AP's are configured as Lightweight.
Cisco Wireless :: 4400 - APs Not Join To WLC
Jan 24, 2011I have a 4400 WLC for 100APs running the 7.0.98.0software version. Now, only 48 APs are joined, and the WLC dont accept new joins. The log below are from my WLC but appear for all others APs:
%LOG-6-Q_IND: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:3a:98:ae:e3:f0 supporting CAPWAP%LWAPP-6-CAPWAP_SUPP_VER: spam_lrad.c:1440 Discarding discovery request in LWAPP from AP 00:3a:98:ae:e3:f0 supporting CAPWAP%CAPWAP-3-TX_ERR: capwap_ac_sm.c:1966 Failed to transmit discovery response to AP 00:3a:98:ae:e3:f0%CAPWAP-3-ENCODE_ERR: capwap_ac_sm.c:2269 Failed to encode Discovery (code)
Cisco Wireless :: WLC Migration From 4400 To 5500
Jun 1, 2012i have a existing wireless network setup in my office existing wlc in 4402 and LAPs are 1130 & 1242 all are working fine but we are now planning to use new 5500 series controllers for the same access points,i want to ask that how i can done this job with very minore downtime and users disconnectivity + zero error results??
View 2 Replies View Related