Cisco Wireless :: WAP 200e - Cannot Do Hardware Reset?
Dec 20, 2011I can't do hardware reset in wap 200e I try as the manual said but nothing When i connected with lan said there is no lan in my pc in order to access the ip.
View 11 Replies
ADVERTISEMENT
Cisco Switches :: SF 200E-24P Not Upgrading Firmware
Aug 13, 2012I have just received a Cisco SF 200E-24P switch and need to upgrade the firmware. The current version is 1.0.0.12 an need to load the latest (or at least 1.1) to get CDP etc. However when I use the upgrade option in the switch I get an error of.Firmware Image download through HTTP failed. Wrong File Type.I have tried 3 different versions of the firmware and get the same error message each time.
View 4 Replies View RelatedCisco Switching/Routing :: WS-C2950-24 - What Last Reset From System-reset Means
Dec 10, 2012Does any know what " Last reset from system-reset " means? Is this becouse of a power failure or someone reloading the switch?
View 3 Replies View RelatedLinksys Access Point :: How To Reset WAP11 With No Reset Switch
Apr 16, 2013I have the WAP11 serial number G3110320414 that does not have a reset switch in the back. How do I get back to factory settings?
View 3 Replies View RelatedCisco Wireless :: How To Reset Dot11Radio
Jul 29, 2008How to reset the Dot11Radio?I have also try to config the power level but it prompt me that the selection is invalid. [code]
View 10 Replies View RelatedCisco Wireless :: WCS 4.2.62.11 Password Reset
Feb 17, 2010I'm very new to WCS and the bloke that configured the bludger has left the company. I'm trying to get into it but I don't have the correct username/password combination.
My query is: How does one do a password reset on a WCS server? Or failing that, is there a way I can ascertain the current unknown password?
I have access to the actual server itself, but not the WCS application. Searching around Cisco.com shows that apparently there is a utility that can be used to reset usernames and passwords however I can't seem to find it. The WCS version is: 4.2.62.11
Cisco Wireless :: Ap 1242 Need To Reset AP
Mar 4, 2013I'm having a little issue with some Cisco Aironet1242ag WAP's. I receive a call at least twice a month stating that some of the WAP's are not giving out internet connection. What I always do is go to my patch panel and disconnect those WAP's not working and connect them back again so they can power cycle. These WAP's are connected to a Cisco3750g. Once the WAP's boot up, the users can connect to the WAP and connect to the internet.
I don't know if these WAP's are filling up with some information that causes the access points to not connect to the WAN.
Wireless Access Always Needs To Reset
Oct 27, 2011My wireless works fine when I am at home, but when I go into a cafe where there is wireless I need to go through the whole troubleshooting process (takes 3-5 min) to reset the wireless adapter (I think those are the words). In one particular location called Popovers I can seem to get access at all anymore. Whats strange is that whenever I go through that troubleshooting process in other locations, I always get the following message at some point : Cant connect in Popovers When I look at the Windows diagnostic
View 1 Replies View RelatedNo Wireless After Modem Reset?
Aug 3, 2012I had some issues with network and I thought that reseting the modem might work. So I did it, I pushed the reset button thingy, but now I can't connect wireless. There is no network offered in "Wireless network connections", like the reset deleted it. What can I do about this?
View 2 Replies View RelatedReset My Wireless Password?
Oct 10, 2011I need to reset my wireless password because I forgot it
View 1 Replies View RelatedDGL 4300 Wireless Needs Reset Often?
Aug 24, 2012I have the latest firmware 1.9 I think. Periodically (every other day) nothing can connect to the wireless. I have to power down the device (which usually means the whole network cabinet since that is easiest then flip it back on.) I don't know if this is part of the problem but I have 5 wireless devices that try to connect depending on the time of day. However once this happens none can connect.
View 13 Replies View RelatedCisco Wireless :: 5500 Cannot Access AP / How To Reset
Jan 30, 2013I have a Cisco aironet 3502i access point which I am using with a 5500 Wireless Controller. I was configuring the AP for flexconnect and accidentally enabled PPPoE authentication - but never set configured login details for PPPoE. Now when the AP boots up it tries to use PPPoE but fails - it never even looks for an IP address. I have no way to get the AP connected to the controller again.I tried logging into the AP via console, the AP gives me output but I never get a login, even when I hold down the Mode button during startup.I also tried holding the Mode button and waiting for the AP to boot with its default IP (10.0.0.1) and connecting to the AP via telnet, but I was unable to connect or even ping with my PC on the same network configured as 10.0.0.2.What can I do to set this AP back to defaults, to become a normal DHCP client, and reconnect to the wireless controller where I can reconfigure it?
View 9 Replies View RelatedWireless :: Linksys Router Reset Itself?
Sep 6, 2011My linksys router reset itself. Yes it reset itself. It resets to default paramaters. I had to change the router parameters in the webpage with the wired connection to the router. That works fine, but after a day or say it comes back to default again. I am going crazy, I am sure nobody is pressing the little button on the router. Do I have virus or something or maybe the router is going bad. It's a WRT54G.
View 2 Replies View RelatedNeed To Reset Wireless Connection Properties
Mar 27, 2011I was trying to set up an ad hoc network and toyed around with some of the wireless network settings. The network I was trying to set up didn't quite work out so I tried to set it back to how they were but forgot how they were. Is there a way to delete the Wireless Network Connection and let it create a new one or is there a "standard" setting for this to strictly find a wireless network and connect to it?
View 14 Replies View RelatedWireless Modem Keeps Reset / Rebooting
Dec 18, 2011I've been having this problem the past 2 days. around 7-7:30pm my motorola sbg6580 will reboot itself every 15m or so the rest of the night.I've checked all my line they are in good condition, I've done the whole pull out all the cords let it sit for 1 minute, I've factory reset it.called the cableone tech support and it even reset while i was on the phone with him. I have a tech coming out tuesday but if it's something i can troubleshoot and fix now i'd rather have that.
View 2 Replies View RelatedReset Wireless N WNDR3300 Router?
Oct 26, 2012I want my wireless to be secure.
View 1 Replies View RelatedCan't Access Wireless Router Need To Reset?
Feb 19, 2013cant physically access my wireless linysys router but want to reset it????
View 1 Replies View RelatedHow To Reset Wireless Router Password
Oct 31, 2011I am wondering how to reset the password for my wireless router? I am finding it hard to set up a new pc each time because it seems the password is always wrong. I want to set it to something I will easily remember.
View 2 Replies View RelatedHow To Reset Password For Wireless Router
Dec 6, 2012I am needing to reset my password for wireless router. I do not have the previous password
View 1 Replies View RelatedReset Wireless Network Password?
May 29, 2012Reset wireless network password
View 1 Replies View RelatedD-Link DIR-615 :: Wireless Setup After Reset?
Feb 23, 2011I need to reset my 615 remotely. I will have someone on the other end push the reset button. I will then need to have them login to the 615 wirelessly. I'll establish a remote control session to their computer, and then I'll reconfigure the router settings. I know how to reconfigure the router just fine.
1) How long do you press the reset button, the manual says 10 seconds, is that correct?
>> 12 SECONDS
2) Once reset, is wireless turned on by default? I hope so, but the manual shows ENABLE WIRELESS unchecked... is that the default setting? Do I HAVE TO CONNECT VIA LAN CABLE TO "ENABLE WIRELESS" first?
>> YES
3) is the default ssid = "dlink" (no quotes)
>> YES
4) is the SSID invisible by default, or is it visible immediately after RESET?
>> IT IS VISIBLE AFTER RESET
The person on the other side can't access the router with a LAN cable, so once reset, the only way to get into the router will be via wireless; that's why I want to be sure I can do this before we do the reset.
Linksys Wireless Router :: How To Reset Cisco Wrt120n
May 10, 2012How to reset the linksys cisco wrt120n router.
View 4 Replies View RelatedLinksys Wireless Router :: Cisco E1000 Reset On Its Own
May 30, 2013I am facing issue with my cisco wireless E1000, the wireless connection on the laptop reset on its own. Its like there is a timer and it reset's the wireless connection after some time. I was unable to measure the time after which it resets but its happening too frequently causing multiple internet apps to fail example if I am downloading something it will fail as the internet connection is reset. The firmware I am running on the rotuer is 2.0.01 and I have configured DHCP on the LAN, I am experiencing this problem with 3 laptop that I use at home which uses both G and N networks.
View 4 Replies View RelatedCisco Wireless :: Factory-Default Reset For AP3600?
Dec 17, 2012How to reset a CAPWAP AP3600 to factory default using the AP's CLI and not the controller.
View 2 Replies View RelatedCisco Wireless :: 5508 Does WCS Automatically Reset Radios
Feb 8, 2012I have a WCS, four 5508 controllers, Cisco 3750X switches, and both autonomous Cisco 1200, and LightWeight 3502i in service.The problems I am having, is that some of my Access Point reset for no apparent reason, and I get alerted by my NMS.When I look at the switch port, that connects an access point that reported down, I see the POE switch port went down and back up in 4 seconds, just long enough for the access point to reset.There are no errors on the switch port(s). No cable or speed/duplex issues. Switch IOS: c3750e-universalk9-mz.122-55.se1
There are no other pertinent entries in the switch log. Just that the port went down and then back up. Always in 4 seconds.When a reset happens the WCS reports on the access point: '802.11/b/g/n' interface of AP associated to controller 172.20.0.x is down. Reason: Indicates that while the radio state should be updated on controller, no reset should be reported.But nothing else, except that the radio came back up.
This is happening two or three times a day, and rotates. It seems that it never happens at the same time of the day, or the same access point, or the same switch. (I have over 1000 access points and 500 switches in service)I am curious if the WCS is automatically resetting the access point radios, which is causing the switch port to go down/up?And if so, is it possible to turn off the automatic reset?
Cisco Wireless :: Dot11Radio0 Interface In Reset / Down Status?
Aug 25, 2011We have two autonomous access point 1142 series running 12.4(21a)JA1 and randomly the Dot11Radio0 interface goes into reset/down state. At first I thought it was something related to power consumption issue on the switch, but looking at the remaining (w) I have plenty.
View 8 Replies View RelatedCisco Wireless :: Hard Reset On Ap 1130AG Does Not Work
Oct 17, 2011I got a problem with a ap that I have here where I do not have the password and I did the process to reset the AP to factory defaults, but the configuration still the same, and the AP still asking for the enable password, its the same problem poused before in this link URL. I did the same process but I still have the old configuration on the AP. I noticed that the AP change the image when I reset the AP, using the mode button. the AP is starting with and rcv image. I need to reset the AP to its initial configuration.
View 9 Replies View RelatedCisco Wireless :: Remotely Factory Reset AP-1231G Through SSH
Jan 23, 2013Is there any possible way to factory reset an AIR-AP1231G-A-K9 that was once attached to a WLC via SSH? I dont have physical access to it and the old WLC has long been decommissioned. I have tried the clear command but since it is in CAPWAP mode that command has been disabled. I know I can press and hold the mode button and reset it that way but I need to know if its possible through SSH to be reset. I have two that are in need of being reset in order to connect to the new WLC.
View 21 Replies View RelatedCisco Wireless :: Aironet 1142 Reset To Default
Aug 4, 2012I have a 1142 that I purchased that needs to be set to factory defaults so that I can configure it. I do an escape at the boot sequence and I get to the
ap:
prompt, the reset instructions that Cisco provides says that I should rename the old config.txt and reboot and that I will then be able to start my reconfig. The problem is that I can't find a config.txt file in the flash space:
Directory of flash:/
2 -rwx 260 Jan 1 1970 00:04:28 +00:00 env_vars
3 -rwx 112947 Apr 1 2011 15:17:10 +00:00 event.log
5 drwx 128 Mar 1 2002 00:01:54 +00:00 c1140-rcvk9w8-mx
9 drwx 256 Apr 1 2011 14:30:32 +00:00 c1140-k9w8-mx.124-21a.JHB1
8 -rwx 5144 Mar 1 2002 00:00:27 +00:00 private-multiple-fs
I checked in the directories listed above and still found no config.txt.
Cisco Wireless :: AIR-LAP1141N-E-K9 Radio Interface Reset
Sep 2, 2012I am facing a problem with my access point AIR-LAP1141N-E-K9, which was converted from LWAPP to autonomous, radio Interface Dot11Radio0 is going to reset down state very frequently.AP is connected to WS-C3560G-24PS (POE) switch. [code]
View 4 Replies View RelatedCisco Wireless :: 1131AG And Radio Reset Code 46?
Apr 24, 2012I have a problem with one of our 1131AG AP, B/G radio go down:
show controller dot11Radio 0:
(...)
Last radio reset code: 46
Radio resets - total:2946 retries:0 failed:0
Reset Stats: Start Cnt: 2742, Recovery: Cnt 33, Last Ret: 20, Fails: 0, Recvry Status: Stalled NO, In Prog NO
Code/Count: 37/00025 46/02851 51/00005 54/00030
Code/Count: 62/00001 67/00001 71/00033
Although I was not able to find any information about this reset code in Cisco documents. What is the reset code 46?What can i do?
Cisco Wireless :: WAP2000 Prone To Reset Automatically
Aug 31, 2011I have a few questions about the Cisco WAP2000 we setup for our customers that I have experienced as of late.
1. The AP is prone to reset automatically; what causes the access point to do this and how can this be prevented?
2. The AP has the SSID and the encryption reset back to factory defaults, however the IP address does not get reset. What would cause this?
3. Is it possible to use 2 of the Cisco WAP2000 as a repeater to increase signal strength of another Cisco WAP2000 that has interference from another stronger signal?
Cisco Wireless :: Wireless Adapter Reset - 861W
Sep 6, 2011I have a problem with my router 861w and I don't know from where is this problem.
I have attached a hard drive on one of the Ethernet port of the router and I'm accessing this hard drive thru my laptop which is wireless connected. The problem is that when I start to transfer larger files from the hard drive to my laptop and the speed gets more or less 4 Mb / s the wireless card reset's and never go up after that. I have to reset the router by unplug it from the power source and then to transfer again.