Cisco Wireless :: WPA2 On 857w - Unable To See Logging Message On User Context On ACE
Nov 11, 2012
Unable to see the logging message on the user context on ACE,but able to view the logging on the Admin Context.
Admin# sh logging
Message logging: none
Buffered logging: enabled (level - debugging) maximum size 1048576
Buffer info: current size - 1048576 global pool - 1048576 used pool - 1048576
min - 0 max - 1048576
cur ptr = 916918 wrapped - yes
[code]....
View 4 Replies
ADVERTISEMENT
May 5, 2013
I'm trying to view the logs from a Cisco 857W router to a workstation running the Kiwi Syslog server. what I've done is the following:
Config term
Logging on
Logging source-interface BVI1
Logging Facility Local7 (or any other facility you want to allocate for this router.)
Logging [IP Address or Hostname of machine running Kiwi Syslog Server]
End
I see noting on the syslog server. Although I can see the log information on the router Also is there a command to stop the logging from generating or is this on by default.
View 1 Replies
View Related
Feb 21, 2012
How do I change the WPA/WPA2 key, without logging into my router's page? What if, my wireless devices as home does not have a browser that I want them to be configured wirelessly?
View 4 Replies
View Related
Aug 28, 2008
When i try logging by HTTPS on a router i have next errors.
%HTTPS: http ssl get context fail (-41104)
HTTP: ssl get context failed (-40407)
I have a 2821 router with
c2800nm-advipservicesk9-mz.124-15.T1.bin ios
View 9 Replies
View Related
Feb 13, 2012
I am missing something and i dont no what but i am trying to ping a pc on the same network but get a destination host is unreachable. Can any one think of anything that could be causing this, i can ping the default gateway and internet address's?
!
interface FastEthernet0
no cdp enable
[Code].....
View 11 Replies
View Related
Apr 20, 2009
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
View 4 Replies
View Related
Oct 12, 2011
For some reason I am unable to retain the system message logging and config archive references after a reboot of the router. I need to be able track config changes and retain the ability for the customer to recover the original config should they destroy the config through any misguided fiddling on their part. There is no remote management and these router need to be recoverable. I know this used to configured by default on earlier routers as I've checked on teh ones we have, but checking through the configuration has not worked and i have everything configured the same but system messages are still lost on reboot. Im using Cisco 3845 running IPbase 12.4(3) and the config i have is shown below.
Logging buffered 4096 debugging
no logging console
!
!
Archive
Log config
Logging enable
Logging size 100
Notify syslog
Hidekeys
Path flash:archive-config
!
Logging history size 200
Logging facility local6
View 2 Replies
View Related
Sep 21, 2012
logging buffered 4096 warnings The above causes router to log all the events with severity level 4 or below in buffer.What about logging console warnings command?will the above command cause router to send log messages with severity level 4( warnings severity level) to console only or will the router send all the log messages with severity level 4 or below to console ?
View 3 Replies
View Related
Jun 25, 2012
I have an issue with a Cisco 857w. When I connect on via SDM I get a message saying "SDM has detected enabled debugs on the router. Because debugs degrade the performance of the router and of SDM, it is recommended that they be disabled". I've connected onto the router via telnet and ran the show debug command which indicates that dot11 debugging is on and when I run the command no debugging all it turns it off. I then do a copy run start and reboot the router and it comes back on. how I permanently disable it?
View 1 Replies
View Related
Jan 12, 2011
ACE 4710 TACACS issues ,How to setup user with Admin context access permission. I have enable the TACACS and it can directly put me in Context mode not in Admin Context mode .
View 8 Replies
View Related
Apr 30, 2013
I am looking for the way how to disagle logging of one user. We are using one testing user for checking accesibility of ACS from large number of switches - this checking exhausting logs quite quickly. Is it possible to disable logging of such user?
View 2 Replies
View Related
Jun 12, 2012
I have a 5508 WLC and 40+ LAP1142N APs spread across 19 locations that allows staff to connect to our private network via wireless. I recently deployed about 40 new laptops all identical make and model HP ProBook 4530's and all have the same client setup for the wireless. Out of those 40 laptops I have 4 that will not connect to the private network. However, these same laptops will connect to my public, open wireless network without issue. In addition to the 4 that will not connect all the others will prompt twice for network authentication.Now, I have about 10 other laptops that are not the HP model and all connect without issue and without dual propt. I don't think this is a wireless network issue but could be some type of issue with this model of laptop.
View 8 Replies
View Related
Apr 15, 2011
We have a ASA5540 and we would like to shutdown the VPN service. To do so, we would like to warn people by sending a message prompt when they logged in using Anyconnect. Message are only working on DA that terminate but not on those who Continue. I have also tried the Checkandmsg fonction but it behave the same way.
View 2 Replies
View Related
Jan 24, 2012
I have kindle fire that is unable to connect to the wireless network.All otehr devices windows phone, xbox and laptop are able to connect seamlessly.Amazon also sent me a replacement, but the issue is still the same. The error is:
"Unable to connect to the selected access point, Please check the password you provided."
Also, I removed the security on the network to see if its able to connect without password.The state where it fails is Obtaining IP address and it fails again.
View 1 Replies
View Related
May 7, 2013
Is it possible to use 1 or 2 of the 4 gigabit ethernet ports from one ACE straight into the other ACE for redundancy? So ACE_01 gig0/4 to ACE_02 gig0/4.If so, is it a case of just having the layer 3 config instead of trunking etc..Also - is it possible to create a context within the same vlan as the Admin context?
View 4 Replies
View Related
Jul 1, 2012
On my production environment I have a firewall with already two contexts defined (15% of CPU used) and I want to add a new one.
This context is going to use the same interfaces as the others contexts. When I will enable the context, can I have some sort of repercussion on these two context ?
View 3 Replies
View Related
Jan 13, 2013
I have two ASA 5510 in an Active/Active failover configuration; On the first ASA I have a license for five security contexts, on the second one I have the default two. On the pair I configured seven security contexts and everything works as expected; so far so good. Let's suppose now that the first ASA (the one with the license for 5 contexts) goes up in smoke; all the contexts migrate to the surviving firewall and life is still good. But what happens if, for some reason, I need to reboot the second ASA before the first one is repaired? My guess is that it will come up with just its own license for two contexts and that I will not be able to operate all my virtual firewalls.
View 2 Replies
View Related
Jan 12, 2013
I have an acer aspire 5742g laptop . I use wifi at my home , and the wireless network seemed to work fine there.
Then after a few days I came to the hostel . We have wifi in the hostel , so I tried to connect my laptop with the wifi . And there is a message that came , "Unable to connect to stes(name of the wifi network ) , earlier I thought that it was a temporary thing and that it would work the next day, but then the next day , my room mates arrived and their laptops connected easily without the error message .
1)When I click on the wifi icon on the right hand side bottom bar , I can see the network , but it does not connect , and gives me the same error message .
2)When I click on Network and Sharing Center , and then on manage wireless network , I don't see the name(stes) of the wireless network(So I can't even remove it)
3)I have tried uninstalling,installing,updating my network adapter , drivers etc . but none of the things have worked .
I can't seem to figure out what the problem is . Its really bugging me now :| , I formatted my laptop , restored it to factory settings , nothing worked. I also tried to connect through a hotspot which I made from my mobile and it got connected easily without any problem .
View 14 Replies
View Related
Nov 16, 2011
I'm encountering what I think is an issue on logging system on FW ASA 5520 - Asa Version 8.4(2), ASDM version 6.4(5). When I disabled the logging inside a rule from ASDM, or from console with the "log disable" option inside ACL, If I check in ASDM logging real time window I continue to see all the entry related to disabled rules. This is a correct behaviour about ASA logging ? How I can "hide" the entry related to disabled rules (this is what I need for troubleshooting purposes) ?
View 1 Replies
View Related
Mar 13, 2013
I have a Cisco 857W router which I have aquired without cost. I want to use the wireless abilities of this router to be the wireless point to get into my home lab while I am studying for my CCNA and beyond.
I have erased it to its factory settings. There is no ADSL connection to it just yet, I might connect in to my internet connection another time. Not just yet.
I dont even know where to begin. I have searched all the internet and there is nothing really anything there to guide me to set it up from the very beginning.
View 6 Replies
View Related
Jul 28, 2012
I have an 871 set up at home with 2 VLANs, both of these vlans present a strange behavior where an user is unable to ping/contact another user on the same subnet, however if users are on different subnet it seems to work [code]
According to the troubleshooting that I have done, the issue seems to be with the broadcast traffic, ARP request/reply do not reach another host on the same subnet (wireless to wireless or wired to wireless) however if the wireless device iniciates the connection to wired, it works fine.
I have tried to enable proxy arp on the different VLANs and BVI and different combinations but no sucess in order to get traffic across 2 wireless devices on the same subnet or a connection that is iniciated for a wired client to a wireless one.
I tried enabling and disabling dot11 arp-cache but no luck.
View 2 Replies
View Related
May 28, 2013
I need developing a acl that can block a computer on the LAN from accessing the internet from midnight to 7am everyday. The router is a 857W, the computer is 192.168.2.33 the internal gw 192.168.2.254 (dialer 1 is 1.2.3.4).acl 101 deny tcp host 192.168.2.33 eq wwwwhat I need to figure out is how to add a time based acl to just this computer.
View 2 Replies
View Related
Nov 19, 2012
I am trying to configure the wireless on my cisco 857W. The clients associates with router but they can't go on internet.
Building configuration...
Current configuration : 4123 bytes
!
! Last configuration change at 12:45:15 CET Sun Nov 18 2012 by simone
[Code].....
View 15 Replies
View Related
Feb 1, 2011
So I was having trouble loading a game on my computer and I was scrolling through forums looking for an answer and one answer that supposively worked for a lot of people was to unisntall and reinstall my network card.IT told me to go to devices -> right click network adapter -> uninstall -> then scan for hardwarer changes to reinstall When I clicked uninstall an error message popped up and said "Unable to uninstall device because device is required on startup" and then it apparently just uninstalled it anyway and it showed back up after I clicked "scan for hardware changes".Now ever since, everytime I try and connect to the internet my computer says "Limited or no connectivity" and I'm unable to access the internet on that computer, the computer I am on now can connect just fine, so it must have something to do with the network card that i supposively unisntalled.
View 17 Replies
View Related
Feb 23, 2011
Receiving the following syslog message from a 4402 WLC:
%CAPWAP-3-AP_DB_ALLOC: capwap_ac_db.c:145
Unable to allot AP entry in database. We receive this message about once a minute on average. I can't find any documentation saying what it is. It looks like a database error, which makes think it might be a memory issue or an issue with having too many AP's on the WLC. However, that controller has less than 30 AP's on it.
View 3 Replies
View Related
Sep 23, 2012
my trouble is I have a cisco 857w and I have never configured a wireless config for a cisco router before. Ok so i have had a go through the web interface (i know, last resort) and still no joy
Basically what im looking for is to have a visible (broadcast ssid) network with a password (WEP/WPA/WPA2, not picky) and it to be joined to the same vlan as the ethernet ports (VLAN 1).
View 1 Replies
View Related
Nov 5, 2011
My friend has just got a laptop and when she is at my place it shows that my computer is nearby but message says "Windows was unable to find a certificate to log in to network".
View 6 Replies
View Related
Nov 4, 2012
I'm trying to configure an 857W to provide Internet connection via ADSL to LAN and WLAN clients on different networks, provided by DHCP. From the documentation, I see that the 857W supports 1 wired VLAN and 10 wireless VLAN. As the only VLAN which can be explicitly configured is VLAN1, which I want to manage the router, for the Wireless sections I have used VLAN11 and VLAN12.
View 3 Replies
View Related
Jul 9, 2011
I am unable to connect to the internet using my user ID,but when I login to the guest account I can successfully connect.I am using windows vista and Mozilla Firefox as my browser.
View 2 Replies
View Related
Jun 22, 2011
I am not able to configure the wifi user and password after configure the ssid & passord it is not working according to my requirement
View 1 Replies
View Related
Nov 21, 2012
Is it configurable to allow wifi user to user traffic on WLC 5508?
View 4 Replies
View Related
May 30, 2011
Our customer has the business needs to authenticate remote users against AD with empty password. I've seen ACS5.1 release note where mentioned about resolved issue: #CSCte72751 #ACS 5.1 drops authentication with empty password.
I tried to authenticate dial-in users through Tacacs and Radius against AD with empty password but without success. ACS points to wrong AD password. Is it possible to authneticate remote users with empty password?
View 3 Replies
View Related
May 19, 2012
Looks like cisco 857w does not support pptp client in my IOS version, only l2tp is supported. Does there is some IOS version I can upgrade/downgrade to configure cisco as pptp client?
View 1 Replies
View Related
