D-Link DIR-615 :: Change QoS Parameters / Slow Connection Wireless

May 11, 2011

I just bought a DIR 615 (firmware 4.0) which I am using as an access point linked to a Netopia router. The Netopia has QoS enabled and needs to keep it, however I was hoping to use the DIR615 without QoS. I am using a ReadyNas Duo as storage for music, videos etc.Now, here are my issues which I think are all linked.

1) I have a very slow connection wireless, between 1'500 and 2'000kbits/sec download. This was not the case with my very old Linksys router

2) When I try to rip a CD from iTunes to the NAS, it brings up error messages of lost connection and impossibility to rip in the middle of the songs. I did not have that problem with the Linksys router neither.

3) I would like to change the QoS parameters to see how it affects this connection issue, as well as change other Wifi parameters, but they show up as greyed out and I can't change them. (I feel that the DIR 615 might inherit some parameters from the main router, since it is used as an Access Point).

View 4 Replies


ADVERTISEMENT

D-Link DIR-655 :: Wireless Connection Seem To Occur Slow After 12-1AM

May 6, 2011

Having some issues with my wireless connection which only seem to occur after 12-1AM, my signal according to windows 7 seems be lowered which results in anywhere from 2-10 seconds stall in service, sometimes even disconnecting me all together.

I get no issues during the day of any sort where i have 4+ other devices constantly using the router but I'm the only person in the house that uses the internet this late in the night so I'm completely stumped on what the problem could be.

Using the Dir-655 router with B1revision with 2.0 firmware, connected with an older wireless G adapter.

View 9 Replies View Related

D-Link DIR-655 :: Slow Wired Connection - Wireless Ok

Aug 19, 2012

I originally installed my DIR-655 as a wireless access point, not using the wired ports at all, and it worked fine like this. Trouble with my trying to set up my Bell router/modem with port forwarding prompted me to change my configuration so my Bell router /modem is now only a modem, and I am using the DIR-655 as a wired as well as wireless router. I have a separate network server and so don't use the DHCP on the DIR-655, and I only use one port to connect to a separate gigabit switch that serves the network.

I am finding that the wireless connection works really well with the few wireless devices I have connected (mainly an apple tv, and a MAC book) but my wired connections to the internet "feel" slow, sometimes with a significant delay before links to sites are established. I click a link, and wait for several seconds before the site shows up in the browser; sometimes after that the same site seems to respond at normal speeds, other times there are added delays.

Is there something in the DIR-655 settings that would cause this? The wireless connections seem fine.

Should I be looking at a new router/modem (rather than separate boxes)? If so what would be the equivalent D-Link model?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: Slow Connection With TL-WR1043ND Router

Apr 24, 2013

Region : Malaysia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.13 Build 120605 Rel.38634n

The connection is slow when I connect my notebook to the TP-Link TL-WR1043ND wireless router. If I connect my notebook directly to to the ISP modem, the connection speed back to normal.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 / Slow Connection Speed

Jan 23, 2013

Region : UnitedStates
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.10 v0005.0 Build 120516 Rel.45877n
ISP : HiPointInc
Network Status.jpg

I've upgraded my line connection from 4mbps to 20mbps.I've also checked my status with HiPoint and on 192.168.1.1 which is shown on the attachment. No problems.

Max Downstream is 25612kbps but Current is only 4396kbps.Do I need to configure anything? Btw its directly connected to my PC?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Slow Internet Connection Via Router

Apr 14, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

Region : Netherlands
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : Ziggo

I currently have a issue with my TP-link WR941N.When I first connected the router I had a good internet speeds of about 70 mbps. My max provided by the ISP is 120Mbps but 70 was acceptable for me. Recently however the connection is terrible. I regularly have a speeds of 6Mbps via the router, When i directly to the modem via kabel I get a speed of 120Mbps. Therefore I ruled out that the connectivity problem is due to my ISP.

View 1 Replies View Related

Tp-link 300mbps Wireless :: Tl-wr1043nd / Very Slow Connection (wired 57mbits / Wifi 4mbps)

Mar 27, 2013

Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet

I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.

Configuration:

Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled

[code].....

View 1 Replies View Related

Slow Internet Connection On D-Link Dir-615?

Nov 8, 2011

Yesterday, my linksys router broke down suddenly. I went to the store and bought a new one, a d-link DIR-615. After plugging it in and setting it up, i tried loading web pages and it worked ok. It wasn't as fast as my linksys router but it was fine. When i tried loading youtube videos, that wasn't the same story. The videos didn't load. It started playing but then stopped after a couple of seconds. When i connected my computer directly to the modem, the videos loaded fast. There seems to be something wrong with the video streaming.

View 9 Replies View Related

D-Link DAP-1522 :: Can't Change LAN Connection Type After Updating Firmware

Mar 27, 2012

I have my dap-1522 connected to my dir-655 in bridge mode.  I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1.  Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network.  Why won't it save?

View 6 Replies View Related

D-Link DIR-825 :: Slow Streaming On Wired Connection

Mar 21, 2012

Recently replace my DIR-615 (it died after about 3 years of steady use) with the 825.Followed CD setup wizard, adjusted some manual thing as well. Am experiencing slow streaming speeds on various websites. A lot of 'loading' pauses within a youtube video for example when I never used to have any stutter at all on my old router.On a cable internet connection with a standard cable modem (no router in it).DIR-825 FW: 2.06NA HW: B1.Wired connection to router, not trying to steam over wireless.Speed tested at 14Mbps down which is what my provider (cogeco cable) promises.

View 1 Replies View Related

D-Link DIR-825 :: Slow Connection After Firmware Upgrade?

Apr 2, 2012

Last week I upgraded the firmware to 1.13NA and ever since, the wireless network has been slooooooow (wired is fine).  If the laptop/ipad/phone is in the same room as the router, things are fine.  Anywhere else in the house, the speed drops off to almost nothing even though the signal strength is very good.  For example:  Under the "Speed" section of my "Wireless Network Connection Status" on my laptop, I'm seeing 150.0Mbps in the same room as the router, 25.0 Mbps in the hallway and 1.0 Mbps about 5 steps further away.  All the while, the signal strength is showing Excellent.Speakeasy speedtest: Wired 23.36 Mbps, wireless at the end of the hallway, .12 Mbps.

Hardware version: A1
Firmware version: 1.13NA
Cicso Cable modem DPQ3212

View 5 Replies View Related

D-Link DIR-615 :: Runs Very Slow And Losses Connection Or Will Not Connect At All

Jul 19, 2011

I have had this wireless router for 3.5-4 months, and it has been working fine up until now.It either runs VERY slow and losses connection often or will not connect at all. I could be sitting beside the router or across the room with the same results. i have even tried connecting a cord from the laptop to the router, but it makes no difference. If it makes any difference we have a PS3 that is connected via wire to the modem and it works just fine, never loses connection. We have used both at the same time since we got it and it was fine up until a few weeks ago.I have tried reseting it and unplugging everything and rebooting the computer and that had no effect. I also tried reinstalling the router on the computer using the setup disk and resetting everything but that did not do anything either. I have an Acer Aspire laptop MTS ~ DSL Modem?

View 4 Replies View Related

D-Link DIR-615 :: Router Causing Slow Internet Connection

May 11, 2011

This only started about a week ago and everything was working fine before then. My router is causing my internet to be slow (I know this because it goes at normal speed when I am connected directly to my modem)

View 1 Replies View Related

D-Link DIR-655 :: Extremely Slow Connection To Secure Websites

May 7, 2011

I am using Comcast as an ISP and have a standalone Arris modem. I, obviously, have a DIR-655 router REV B with a firmware revision on 2.00NA. I have already turned off packet shaping and QOS. Also, I have set the firewall settings to Endpoint Independent for both TCP and UDP, and assigned static IP addresses to my computers. The problem I am having is that whenever I go to any secure websites, i.e. anything that starts with https, it takes an extraordinary long time to log in and to navigate to any webpages therein. I also cannot upload photos to a website and when I try the Speed-test.net website the download speed is OK but the upload test errors out, it doesn't connect.

View 2 Replies View Related

Cisco Wireless :: AP 3500 Configuring Antenna Port Parameters

Oct 24, 2012

a customer has bought a new AP 3500 with external antennas and he would like use his old antenna AIR-ANT2485P-R.
 
We have the option to configure the antenna parameter in WLC under Wireless > Access Points > Radios > 802.11a/n or 802.11b/g/n for external antenna and and using only port A.
 
But if  we enable only one port (Example: port A) we will get a warning message: Need to have at least both dual mode antennas (antennas A and B) enabled
 
Is it not possible to use an antenna like ANT2485P-N together with an Access Point like 3502E?

View 6 Replies View Related

Cabling / Cards :: Slow / Spiking Internet Speeds With Wired Connection Through D-link WBR-1310 Router

Sep 18, 2012

I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.

I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.

Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02

[Code]......

View 2 Replies View Related

Cisco Wireless :: 1600 AP Series Cannot Enable Clean Air In Global Parameters

Jan 8, 2013

I have a 2500 and I have successfully joined a 1600 AP to it; however I have noticed that I cannot enable CleanAir in the Global Parameters with just the 1602 AP joined.  This feature was enable when I had my 2602 AP connected.So, is the problem that the 1602 doesn't fully support CleanAir?  If that is the case, how do I enable CleanAir Express or is that something you can even enable thru the GUI?

View 9 Replies View Related

Cisco Wireless :: 1142 - Lightweight AP Template / Flex Connect Parameters Error

Jul 9, 2012

I created a LAP Template in NCS to configure some new 1142 LAPs that were installed in a remote office. These LAPs need to be in Flex Connect mode with V LAN support.  The template is being applied with partial success on every access point.  Details of the partial success say the Flex Connect Parameters fail with the following error.

Provision Failure: { URL}.Object Not Found Exception cannot be cast to [URL]
 
Am I doing something wrong? The Flex Connect portion of the template has V LAN Support enabled, Native V LAN ID, and the Profile Name- V LAN Mappings configured.

Prime NCS version 1.1.1.24 Access Points are AIR-LAP1142N-A-K9s running 7.2.110.0

View 3 Replies View Related

How To Change Ip On Wireless Connection

Dec 4, 2011

I am using laptop with wireless connection. would like to change my ip address

View 2 Replies View Related

Wireless :: How To Change Connection Settings

Feb 10, 2011

I am trying to set up a internet connection to my campus network. i followed there instructions to the T. The network requires me to change my proxy settings. But every time i change my proxy to connect to the to the network, it say that i am connected but i can seem to load any pages. it worked before but i just redid my computer an it doesn't work now. one of the steps in the list of instructions given to me by the university was to select "dial whenever a network connection is not available" but selecting this is restricted for sum reason what do i do ?

View 1 Replies View Related

TP-Link 150Mbps Wireless :: Possible To Change Language?

May 13, 2013

Region : Hongkong
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP : PCCW

Just bought the router in Hong Kong to connect to my Mac. Typed in [URL] and everything is in Chinese with no link that I can see to change it to English. Is it possible to change the language?

View 4 Replies View Related

Wireless :: Get Wifi Connection Ip Change Program?

May 5, 2012

i am use wifi connection for this which program i have to run?

View 1 Replies View Related

Change Password For The Wireless Connection To The Internet?

Dec 1, 2012

I need to change my password for the wireless connection to the internet

View 1 Replies View Related

Wndr3700v3 - Change Laptop Over To Wireless Connection

Jul 18, 2012

Currently running windows 7, 64 bit, purchased netgeat router wndr3700v3. I setup router with it, now I'd like to change this laptop over to a wireless connection.

View 3 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR741N - How To Change The Language

Feb 19, 2013

Region : China
Model : TL-WR741N
Hardware Version : V4.20.0
Firmware Version :
ISP :

I am American living in China. My Chinese reading is not so good, I am still learning. The interface for my router comes up in Chinese. Is there a way to change the language to English? So far, all I can do is get the set-up interface through IE, but I can not set it up!

View 1 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR740N - How To Change Password

Apr 28, 2013

Region : Others
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :

how to change my router password?

View 2 Replies View Related

Sweex LW050UKv2 - Obtaining Network Parameters

May 13, 2011

I have had this router for about 5 years now, I had problems setting it up from the start as I was fairly young but I eventually found a way around it - no problems since. Through memory I am sure I had this problem previously but I had the disk to give me guidelines on what to do(which I don't have any more). I have phoned up virgin (my ISP) and they said it was an issue to do with the router, to which I searched into the routers address, in this case 192.168.50.1. Scrolling down, I noticed that under the WAN section it says:

MAC Address:00-16-0A-09-CC-69IP Address:0.0.0.0Dynamic IPSubnet Mask:0.0.0.0 Default Gateway:0.0.0.0 Obtaining Network Parameters...DNS Server:0.0.0.0 , 0.0.0.0

I have spent a good part of today trying soloutions to get this to work again but I just can't seem to find a way around it. As I said, the router has been working fine for pretty much 5 years now and I really do not know why the WAN went. In addition, it was set up wireless. How can I obtain the newtork parameters?

View 4 Replies View Related

Linksys Wired Router :: BEFSR41 - How To Get Parameters Set Up

Oct 16, 2011

I have an AT&T Univese which is class G.  I want to run it in class N.Do you think plugging my Linksys router into the AT&T will give it to me(class n)?If so, how do I get the linksys parameters set up?  It giving wrong readings at its not connecting to the internet.

View 3 Replies View Related

Linksys Cable / DSL :: X3000 Missing DSL Parameters

May 4, 2012

Following the chat with the technical support of CISCO.In few words, the LINKSYS X3000 is the only router in the world that can't shows the DSL line parameters ( SNR and LINE ATTENIATION ) so you can't evaluate the line quality without using another router.... INCREDIBLE!!!!Let's see how long it will be before the firmware update!Me: simple question: is rather embarrassing but I can't find the SNR value (Adsl status) in the Linksys X3000 interface. Same for the Line Attenuation values. These are the standard DSL information and they are essential to evaluate the DSL line quality.Unfortunately, you are right, these parameters are not available on the Gateway (X3000) Setup page.Me:It's unbelievable I use routers for my work and this is the first product that can't shows the DSL line parameters...The only parameters available under DSL Connection Subta are Status, Downstream Rate and Upstream Rate.Me:Do you think it's serious? The price of this product and the target to which it is oriented suggest a more professional approach.I agree, but as of now, this is how it is however, you need to keep an eye on future updates for the device that might include these paraters/features.Me:Please could you send a notification to the DEVELOP TEAM to quickly update this product FIRMWARE and close the gap that separates it from other products in the same category?

View 9 Replies View Related

Cisco Application :: ACE 4710 Parameters Lost In URL

Mar 17, 2013

I have configured SSL offloading and redirection on a 4710 appliance. Everything works fine. The issue I am facing is that some parameters in url are getting lost.
 
I have https://%h/%p configured as a redirect server which works fine as far as hostname and path is concerned. i.e. full hostname and path are preserved, but that there are some parameters after the full path in encrypted format which are getting lost. I think 307 redirect can resolve this issue but ACE does not support that.

View 4 Replies View Related

Cisco WAN :: Minimum Parameters To Configure T1 Between Two 1841?

Oct 16, 2011

I configure two WIC-1DSU-T1-v2 interfaces with a T1 crossover cable. What are the mimimum configurations to do to communicate from LAN1 (int fa0/0 of one 1841 router) to LAN2 (int fa0/0 of the second 1841 router) ?
 
Do I need a routage protocole ? And if yes wich one ? Interne or externe (RIP or BGP) Or static route is enough ? Also, is that I should put a encapsulation, like ppp ? Is it neccessary on a point to point line ?
 
Finally what about the following commands, do I need it ?

service-module t1 clock source internal
service-module t1 timeslots 1-24 speed 64
service-module t1 framing esf
service-module t1 linecode b8zs

View 4 Replies View Related

D-Link DIR-655 :: Really Slow 802.11n Wireless?

Mar 6, 2011

Just got my fiber Internet 100/100mbit and connected it to the D-Link Dir 655 AP. I only get about 30mbit out of it. I've scanned and tried to change to channel 1, 6 and 11 with no luck, same speed. There is no electronical devices between the AP and the PC. When i go into task manager in Windows, it says i'm connected to the ap with 130mbit. I got the latest firmware.

View 14 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND - Change Static IP Address?

Feb 24, 2013

Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120703 Rel.29030
ISP :

I have setup some static addresses but now some of them need to change... But I can't see how to amend the DHCP table..There must be a way of doing this beyond altering the DHCP range so I can put them all in againLAN Setup.JPG.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved