D-Link DIR-655 :: Setup My Router And Notebook To Get 802.11n?
Sep 17, 2011
Ive just bought a new Toshiba laptop that support 802n, and have an old HP which does not.en choosing 802n only, the Toshiba for strange reason cannot connect to my router.
View 14 Replies
ADVERTISEMENT
Sep 16, 2011
I am trying to set up a new notebook and it can't find the IP Address. I do not know my IP address or remember my password. My server is BK Mom.
View 1 Replies
View Related
Jan 9, 2012
My 655 router (RevB, Firmware 2.03) is connected from one side to a DSL modem and on the side to two wired PC's and via wi-fi to several other wireless clients (two smart phones and two notebooks). All is well until I try to connect a specific notebook. Connection is estabished for about 30sec and then the router drops ALL connections (including internet and local network!) and I must re-start him by un-plugging from power. This phenomena is specific to a specific notebook since with the other one
View 7 Replies
View Related
Aug 25, 2011
I was using this router and Malaysia TM UNIFI service. I can use wireless but can't detect the LAN port. I have try it to other modem router and it's working. Its keep showing my local area connection network cable unplugged and no signal at all. And the router was working well on other PC and notebook.Try many way but still can't work
View 3 Replies
View Related
Jun 15, 2012
The problem is that it always stays around 121-150mbps and sometimes 270mbps(beside router). here is my wireless settings on my router
router setting 1: [URL]
router setting 2: [URL]
network card setting:
802.11n channel width:auto
802.11n mode:Enabled
Ad-hoc channel:11
Fat channel intolerant:Disabled
Roaming aggressiveness :Medium
Throughput enhancement:Disabled
Transmit power:Highest
Wireless mode:802.11a/b/g
View 9 Replies
View Related
Jan 26, 2012
Using the quick set up of DIR-600 from the CD, I encounter this message:"Your new router does not appear to be connected properly.Follow these steps:
1)Make sure that your are connecting your new router...
2)Make sure the ethernet cable from your PC is securely...
3)Click Retry to try installing your router again."
I tried all several times and still I end up on that screen message.
View 5 Replies
View Related
Jan 9, 2012
I am trying to setup my printer using the USB port on the router. I installed the share-port utility 32bit and every time i try to connect to the printer from my desktop the computer crashes and i get a blue screen.
View 14 Replies
View Related
Jun 10, 2011
How to set up D link DWL 2100AP as wireless router?
View 1 Replies
View Related
Jun 21, 2012
I can't to put the security on my D-Link N150 some pepeol us my wifi some time.
View 1 Replies
View Related
Jan 27, 2011
I am trying to set up a d-link router with a modem provided by time warner cable. I've powered down, reset the router, and I've put it on dynamic settings (sorry if that's incorrect terminology... not a comp. buff). I can't get my wireless to connect to internet.
View 1 Replies
View Related
Feb 19, 2013
Don't have CD. Where do I download this on Dlink site?
View 3 Replies
View Related
Sep 2, 2012
I use to have a DIR-655 and dap-1522 both worked without any issues. I recently upgraded to Asus RT-n56u and now I want to setup the dap-1522 with it.I have no issues with the Asus RT-n56u everything seems to work fine here the problem seems to be with the dap-1522 where it connects but then disconnects almost instantly.
1) Connect dap-1522 with my desktop computer via Ethernet
2) Change the LAN settings for tcp/ip v4 to manual IP
3) I set the manual IP to 192.168.0.60/ subnet mask 255.255.255.0 and the default gateway to 192.168.0.50
4) I open my web browser and connect to 192.168.0.50 and I see the dlink page and I log in fine.
5)I tried going through the wizard, picked manual and have tried both the 2.4ghz and 5.0ghz bands they are set up as WPA-Auto Personal and I enter in my password. It says settings will be saved
6) The page refreshes to the wireless one but I don't see any options here just the save config one. When I go to status sometimes it says its connected but sometimes it just says it's not I try to unplug from my desktop and take it over to where my apple tv is but it never works..One thing I should note is my asus is connected to 192.168.1.X so do I need to change the dap-1522 to 192.168.1.50? instead of 0.50?
View 12 Replies
View Related
Jan 26, 2012
I just bought a new wireless router and I currently using my older dlink dir-524 wireless router in my home.eason in buying a new one is because currently the dlink router is in the family room use to be a garage and my wifes imac is in our bedroom the couple rooms down not next door or anything, and the imac and even our smartphones when in our bedroom the connection gets disconnected then reconnected etc etc, basically signal strength is low initially when connected to the router.
View 8 Replies
View Related
Apr 7, 2011
How to set up my router just for my home connection.Already did some basic stuff to it but i just want to add more security to avoid unwanted user trying to hog my internet connection......
ISP: Globe Broadband (HUAWEI router)
Wireless router: TP-LINK WR340G
I really want to learn about this stuff and btw everytime i turn on my Routers Firewall (TP-LINK) i lose connection its like blocking the Globe's internet connection to me.
View 5 Replies
View Related
May 10, 2013
Region : Others
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP :
How can u acces to the setup TP-Link WR740N router who is WDS with other router ???
I make changes like this , WDS with TP link (IP 192.168.0.1) with adsl wifi modem who is main ip 192.168.178.1 it`s working but ,my ip from TP-Link modem is not working (192.168.0.1),only the addrees from mu first router is working 192.168.178.1
How to enter in my TP-Link modem, or i can`t , only factory reset
View 5 Replies
View Related
Mar 15, 2013
Region : Others
Model : TL-WR740N
Hardware Version : Not Clear
How can u acces to the setup TP-Link WR740N router who is WDS with other router? I make changes like this , WDS with TP link (IP 192.168.0.1) with adsl wifi modem who is main ip 192.168.178.1 it`s working but ,my ip from TP-Link modem is not working (192.168.0.1),only the addrees from mu first router is working 192.168.178.1.How to enter in my TP-Link modem, or i can`t , only factory reset
View 1 Replies
View Related
Jul 21, 2012
I have the DCS-930L camera. I need to know how to setup port forwarding/triggering on my router, which is a Cisco DDR2200 CL. I understand that in order to use the camera, i need to do this. how to set up NAT.
View 1 Replies
View Related
Mar 15, 2013
Region : Austria
Model : TL-MR3420
Hardware Version : V1
Firmware Version :
ISP : orange.at
When I first installed the router I used the built-in provider settings for "ONE" which used to be the name of the provider before it was taken over by orange.at. It seemed to work fine but I experienced some funny server errors with certain web services. I contacted orange.at about this and they told me to adjust the provider settings in the router as follows:
Dial number: *99#
APN: fullspeed
The reason for the problems was that they use different proxy servers for their services and applications. Now it works fine (so far).
View 1 Replies
View Related
Nov 14, 2011
My laptop is refusing to recognize the router. Until yesterday everything was fine, now it's not recognizing it at all. There are other computers on the network that connect just fine. When i go to Device Manager it is also missing the following:
Base System Device
Base System Device
Base System Device
Ethernet Controller
Network Controller
PCI Device
SM Bus Controller
Video Controller
Video Controller (VGA Compatible)
Since I can't get onto the internet from that computer, where to go to get the drivers for these to download.
View 1 Replies
View Related
Oct 7, 2011
set the max download speed of torrent protocole by my router setup page ?My step father currently downloading with torrent and all the internet in the house is pretty slow so i will love to lower he speed so i can use my internet properly
View 5 Replies
View Related
Apr 14, 2013
I had download the last version firmware 10.0.19 WAG54G2 but its in img format and my notebook dont have CD drive anyway to unpack it ??
View 3 Replies
View Related
Feb 24, 2013
I'm using an E2500 router and an EA2500 adapter (to update my desktop from 802.11 g connection to 802.11n). I've connected my notebook to the network and the connection speed for the notebook is approx. 5.5 Mbps compared to 21.5 Mbps for the desktop connection. why the notebook connection is so much slower?I've just reinstalled both the E2500 and EA2500 tonight. I'm not sure whether or not there was such a vast difference in speed between the two before the reinstallation.
View 4 Replies
View Related
Jul 13, 2012
I own an HP Pavilion dv6 Notebook PC and recently purchased a Cisco E1500 to replace my aging WRTG54 wireless router. Since installation of the new router I keep getting dropped from my LAN and the internet with "connectivity issues" ... this only occurs on my notebook PC and not the other wireless devices I have in my home. I’ve done some searching on the internet and this seems to be a generic problem with the Broadcom 802.11b/g/n card the notebook uses. I have 2 questions:
1) Is there an easy way to adjust either the card or the router to deal with these issues and if not then
2) what is the best notebook card to replace the Broadcom with to assure these issues go away.
View 9 Replies
View Related
Apr 2, 2013
Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Looking at the manual for this router in regards to bandwidth restrictions.When you set up the Rules under Bandwidth Control does this setting shared by the IP range or does each IP in the range get that amount of bandwidth?
View 1 Replies
View Related
Nov 13, 2011
I just got a new notebook that has windows ultimate, and whenever i turn it on it knocks off all the other PCS on the network and the printer, including the one the router is wired to. I can only get it to pick up all 4 devices when i go into the Lynksys program and click change password. But then the program locks up and i have to shut it off manually.
I already reset the router four times trying to get it to pick up all the PCs but it never works. I'm ready to toss the router and get something else. Are there any settings I can change or reset before this router becomes garbage fodder?
View 1 Replies
View Related
Jan 18, 2012
I was upgrading the firmware of the WRT54G router when the notebook´ screen closed and it went to standby mode. It was stoped the upgrade process.Now only the ports and Internet LEDs light up, but the power LED is off.I also cannot connect to thenavigator for show the administrator´s window. Any procedure to recover the operation of the router in a situation like this?
View 1 Replies
View Related
Jun 12, 2011
I own a D-Link DIR-825, hardware revision B1, which I last night flashed to DD-WRT, DD-WRT v24-sp2 (08/07/10) std, (SVN revision 14896), as per the WIKI page for my router on DD-WRT site.
I followed various tutorials to configure the settings in DD-WRT and my Internet on ISP IP address is flawless. However, I am having trouble getting the VPN settings into router pages. I want my entire WLAN/LAN to be able to use VPN direct via the router.
see my applicable screenshots from DD-WRT. I have deleted my password on the second screenshot to protect my account. As you can see on the last screen, I am not getting any message under the "state" and "log" windows as should be received if the VPN connected successfully.
NOTE: I have posted this on DD-WRT, HideMyA**, and D-Link forums to maximize my exposure and try to get a solution quickly. My intent is NOT to "spam".
View 1 Replies
View Related
Jul 23, 2011
I am trying to setup a home network where I have multiple low bandwidth or rather lower bandwidth links coming in. They are suppose to be broadband but I do feel the need for a fatter pipe. Since this is in India and we have limited availability of bandwidth options like here in the US I thought if I could double or even get close to doubling my bandwidth using some sort of device for link aggregation or a network / pc setup which can achieve thisThe links I am getting are above 1mbps, possibly even 2mpbs and its relatively cheap, 100$/yr so I can add 3-4 to get desired results. A dedicated 10mbps connection costs nearly 12000$/yr so I have a lot of margin to create a substantial pipe without the cost if what I am thinking is possible.
View 4 Replies
View Related
Jan 18, 2012
I'm attempting to set up a DIR 825 and I have a damaged setup disc.Is this available as a download?
View 3 Replies
View Related
Jan 2, 2013
Here's the situation, 2 houses, house #1 has internet, DIR-665 connected to Cable modem, between the 2 houses CAT 6 cable, house #2 has DIR-655. Both houses need to offer wireless. How should the DIR-655 (house#2) be set up? (SSID/DHCP/UPNP/IP/GATEWAY/SUBNET, etc)?
View 1 Replies
View Related
Aug 5, 2012
How do I setup one IP to throttle bandwidth?
View 1 Replies
View Related
Jul 28, 2012
I have a DIR-825 coming. Do I really need that long to setup something? When I got my Netgear all I did was plug the sucker in. Two ethernet cables in the back. Done. Later on I added a wireless device in the living room so I setup a name and key. Done.I still have the same devices, except going to add my Girlfriends Daughter and QOS her bandwidth.
View 1 Replies
View Related
Mar 22, 2012
facing issues with TP-Link TL-WA801ND while setting it up as a Universal repeater.The AP is a Linksys E3200..and I got the TP-Link to broaden my WiFi at home, I was successful in setting it up, however, after a day or two I get prompted to enter a "WPA2 Enterprise" username/password.I DID NOT setup WPA2 Enterprise, mine is WPA2 Personal...it's peculiar that it works for a bit then reverts to Enterprise.
View -1 Replies
View Related