Getting TP-Link Universal Repeater Setup?
Mar 22, 2012
facing issues with TP-Link TL-WA801ND while setting it up as a Universal repeater.The AP is a Linksys E3200..and I got the TP-Link to broaden my WiFi at home, I was successful in setting it up, however, after a day or two I get prompted to enter a "WPA2 Enterprise" username/password.I DID NOT setup WPA2 Enterprise, mine is WPA2 Personal...it's peculiar that it works for a bit then reverts to Enterprise.
View -1 Replies
ADVERTISEMENT
Mar 19, 2011
I've been using a Belkin 54g Universal Repeater for around a year and a half to extend my wireless connection around the house but recently it's stopped working completely. The red "Searching" light is flashing constantly and it doesn't register with my computer anymore. I've tried connecting it to my main router and to my computer via ethernet to no avail.
View 1 Replies
View Related
Aug 14, 2012
Is it possible to downgrade the 4900M IOS image from Universal 15.x image to non-Universal (possibly IP BASE) 12.x image.
View 1 Replies
View Related
May 24, 2011
Can a dir-815 be setup as a repeater?? I have a Linksys wrt54g as the main router can the dir-815 be used to extend the wifi range of the Linksys router. If the dir-815 can be setup as a repeater how would I go about setting it up as a repeater?
View 3 Replies
View Related
Dec 11, 2012
Could not find on Belkin website, hyperlink came up with "oops' result. Basic instructions to hook this up to my TV.
View 1 Replies
View Related
May 18, 2012
Extending wireless network range with a repeater HP and Netgear - YouTube my reapter is a old netgear router n150 wondering if its possible.
View 4 Replies
View Related
Nov 29, 2011
Trying to setup a repeater down stairs for better wifi signal but am running into a problem. The main router I use for my network is a Linksys WRT54GL. The router I'm trying to hook up as a repeater is a Asus RT-N10+. The issue I'm running into is that they both use the same IP address for the web gui so when I try to configure the Asus it goes straight to my Linksys instead.
I tried to disconnect the Linksys in order to get the Asus going in repeater mode but didn't work. What I'm wanting to do is change the router IP address on the Asus so I can have both of them online at the same time to get the Asus going as a repeater. I tried to change the Asus IP but when I did it asked me something along the lines of whether I wanted to change the DHCP address being it didn't match what I had typed in as the router IP.
View 3 Replies
View Related
Oct 11, 2011
How to setup dir615 with wpn824v3 as a repeater? I run Windows XP Home on 3 pc's
View 4 Replies
View Related
Oct 25, 2011
how do you setup a wireless repeater using a awus036h. Or is it even a option?
View 1 Replies
View Related
Aug 16, 2012
I have a wireless access point/modem at one end of my property (which I cannot relocate). To improve wireless connectivity on the other end of the property I am thinking of placing a wifi repeater (probably a cheap one like http:[URL]... mid-point in the property. However I don't quite understand how these things work. I assume repeaters, extenders, boosters are all the same thing?
Does the repeater actually create a new seperate wifi network, so I will effectively have two wifi networks/SSIDs? or will my wireless devices still see only one wifi network? If it creates two wifi networks what happens when I move through the property with say a laptop, will the laptop need to disconnect from one and reconnect to the other hence interrupting the connection? (which is not ideal).
Also does the repeater take up an IP from my main wireless access point/modem? My setup uses a block of static IPs and hence I would prefer not to waste an IP on the repeater if possible.Homeplugs is something else I'm looking into but that seems to be a more expensive option. With Homeplugs I would disable the wireless on the main access point/modem. Then use the Homeplug to put a wireless access point in the centre of my property hence giving fuller coverage.I've also tried higher DBi antennas (& directional ones) but they have not been effective.
View 1 Replies
View Related
Dec 2, 2012
So i am trying to Set up a wireless repeater so i can have a better signal in my back yard but i could not set the configurations for my repeater because the gateway (ip address? Not really sure what it is called) would not work when i entered it into the browser. So i went into command prompt to make sure i had the right gateway and it did not even exist.
View 6 Replies
View Related
Oct 31, 2010
I have a Cisco WAP200 Wireless-G Access Point - PoE/Rangebooster with the latest firmware 2.0.2.4-ETSI?I’m trying to set it up as a repeater, repeating the wireless signal from a Cisco 877W.I have configured the WAP200 with the same SSID, WPA key, and channel as the 877W.
I have changed the WAP200’s AP Mode setting to Repeater, and picked up the 877W’s MAC Address.The WAP200 is broadcasting and I can connect to the wireless network, but I don’t get DHCP. It’s almost like it’s still in Access Point mode.
View 3 Replies
View Related
Mar 11, 2012
I have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.
View 1 Replies
View Related
Jan 25, 2012
I use my e2000 as router and want to use the e4200 as repeater. so if i connect wireless to my e4200 i can see all my devices also the one on the e2000. How to setup the e42000 ?
View 5 Replies
View Related
Oct 19, 2010
I have 3 WAP200 wireless-G access points. I have one set up as an AP the other two are set up as repeaters to the main AP.
My question is Do I need a lan connection to each repeater ?
also, do I need to create SSIDs for all three? & if so, do they need to be the same?
View 7 Replies
View Related
Jul 10, 2012
Can the Aironet 1310 setup as a repeater? I could not make the AP as the repeater associated to another 1310 ap. This AP is running LADAP.
View 11 Replies
View Related
Nov 27, 2011
I tried to set up Tenda W311R as a repeater to increase the coverage. I have done the following, but still it cannot get Internet access:Set up WDS with the same channel and use the same encryption as the Linksys router; Disable the DHCP in the W311R;From the wireless point of view, I can see the Tenda router, but no Internet access.
View 3 Replies
View Related
Jun 25, 2011
I have WRT54GL and want to setup wap54g as wireless repeater? I need to expand the signal using wap54g
View 1 Replies
View Related
Oct 23, 2011
I have a D-Link DI-624 router and I understand that I can convert this router to a repeater using on line software thus allowing me to extend a wireless signal from up to a 1/4 mile away
View 1 Replies
View Related
Aug 16, 2011
I was wondering if it possible to use the DIR-825 as a repeater. My main router is a Airport Extreme but it doesn't reach the whole house. Now what I'm also wondering if I can use the repeater as well as a SharePort for my external hard drive while it is being used as a Repeater.
View 4 Replies
View Related
Oct 5, 2012
I just recently upgraded my home router from a 615 to a 655, so I thought I would use the old router as a repeater bridge at another location.
I read that the DD-WRT firmware offered a repeater bridge function, so I successfully flashed the 615 C1 with the latest release 7/12.
I get all of the configuration steps, and even have set up client bridge mode. My problem is when I bring down the list of available wireless modes, repeater bridge isn't on the list.
Is the C1 version not able to do this? is there something else I need to do to enable a repeater bridge?
View 4 Replies
View Related
Apr 8, 2013
I find that within my apt I can only get about 32% signal from my shaw Wi-Fi router. They don't support what I want to do.. adding my d-link router to boost or repeat the signal.
View 1 Replies
View Related
Dec 7, 2012
How do you convert a D-Link router into a repeater?
View 1 Replies
View Related
Feb 23, 2011
I want to extend the range of the wireless network using a 601 (or just a relatively lowend N series). Can I just set a 601 as a repeater? Not seeing anything in the manual that provides instructions. I don't have the ability to cable the routers together. I want to do it all wirelessly if possible.
View 1 Replies
View Related
Mar 11, 2011
My D-Link DIR-628 is at the far end of my house (next to my desktop and cable modem) and my PS3 and laptop are at the other end of the house in my living room. I'm not sure what's in my walls but it is NOT WiFi friendly!
[code]....
So I was thinking about buying a cheap N router and flashing it with DD-WRT and putting it in the living room.
I'd like this 2nd router to:
(a) Plug into the PS3 thereby "upgrading" it's crappy wireless card to something faster
(b) Have it act as a WiFi repeater to boost coverage on the far side of the house.
So is this going to work the way I'm describing it here? That's my current understanding based on what I've read, but I want to make sure I'm not missing something before I order the hardware.
View 1 Replies
View Related
Sep 30, 2012
I need universal lan driver for windows 7
View 3 Replies
View Related
Dec 31, 2011
My setup consists of the following: TP-LINK Router Model No. TL-WR541G and TP-LINK Wireless Repeater Model No. TL-WA500G.I've set the Wireless Mode Settings to Universal Repeater and turned on MAC filtering. My problem is that when I connect to the wireless repeater with a phone or tablet (both working on android) it just wont connect. It gets stuck on "obtaining ip address". The wireless repeater works fine with any laptop, pc, netbook etc. I made sure that all the MAC Addresses are entered correctly. Also the phone and tablet connect fine to the router, but when the router is out of range and it tries to connect to the repeater it doesnt work. I tried all the basic troubleshooting techniques i.e. turning off wifi, turning off repeater & router.
View 6 Replies
View Related
Sep 9, 2012
I have the main router, which is SMC SMCD3GN from Rogers in Canada, and I have heard from MANY people that this router REALLY sucks..especially the range. And I myself also had problem with low signal in the 2nd floor of my house, so I purchased the wifi repeater (TP Link) to extend the range. I followed the guide given in the box, and everything was set up flawlessly. However, after a few hours of use, all my devices (laptop, tablet, phone) which are in the same room as the repeater decrease the signal again, to the point where it was before I purchased the repeater. Then if I disconnect the wifi and reconnect, the signal is full again. Sometimes I have to unplug the repeater from the wall and replug in order for it to work.
View 2 Replies
View Related
Nov 15, 2011
i just happened to have a spare DIR 601 and I already installed DDWRT on it. Now my question is can make this as a wireless bridge or repeater? with only using the signal of my DIR 655 router upstairs?
View 4 Replies
View Related
Apr 2, 2013
I have Dlink DWL - 2000AP+.
What I want to do is, to reproduce WiFi signal (from TP-LINK modem) by repeating with D-Link Wireless Access Point.
Here is how web interface looks. There is an option for repeating:
After clicking Site Survey I see all list of available networks. When I select one of them, the D-link saves changes then reboots. After that, Windows shows me something like that on available WiFi networks list:
<Repeated network name> 2
The problem is, when I connect to this network, Windows connects directly into root source, not to my WAP (I see this with inSSIDer utility).
View 1 Replies
View Related
May 29, 2012
I'd like to setup my Motorola 0XB9 as a wireless repeater.
View 1 Replies
View Related
Jan 26, 2013
Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :
ISP :
I am connected to the internet via a non TP=Llink ADSL2 modem/router supplied by my ISP.I was using my TL-MR3220 as a 3G modem but no longer need it for that purpose. I was wondering whether I can now use my TL-MR3220 for two other purposes: as an additional wireless access point and as a means of linking equipment (i.e. printers) to the home network . i have tried connecting the ADSL2 modem/router to the TL-MR3220 via an ethernet cable (one of the 4 LAN ports on the ADSL modem/router to the blue WAN port on the TL-MR3220) but I can get no internet connection through the TL-MR3220.Is this normal i.e. something that the TL-MR3220 is not designed to do, or am I just using the wrong settings ? I have tried a whole range of different settings but none seem to work.
View 5 Replies
View Related
Apr 29, 2013
Region : Others
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 5.0.0 Build 120522 Rel.23978
ISP : Nepal Telecom
My router said it has Wireless Access Point and WDS.I think to use this router as a repeater?
View 1 Replies
View Related