D-Link DIR-655 :: Web Surfing Shuts Down / Everything Else Stays OK
Aug 27, 2011
I am ignorant with networking. The most I know is /ipconfig.I am stationed in Japan and have a fiber modem going into my DIR-655. For about two years everything has been fine...no problems ever.About a month ago, I started getting timeouts and page not found errors when surfing the web, but my online games (EVE, WoW, etc) and our Xbox360/PS3 work fine. The only thing I could think was to unplug and plug back the DIR-655. Sometimes that works for a day or a week, but ultimately it always comes back. Is there a setting on the router I can change to avoid this, or a software command I can issue from the computer to clear something?
View 5 Replies
ADVERTISEMENT
Mar 6, 2012
My DIR-825 stays on even when I flick the power switch, for as long as I don't disconnect the externally powered Belkin USB hub from it. Some lights do come off, Internet light turns orange, but it stays on. If I disconnect the hub before trying to shut down the router, it turns off instantly.
I feel slightly worried by this because as far as I am aware, a USB client device shouldn't be feeding power to the host. On the other hand, the host shouldn't be accepting power from the client either.
Also, sometimes after days since last reboot, the USB light on the router is not on despite connected devices, and they may or may not appear in Shareport.
View 3 Replies
View Related
Jun 16, 2010
I'm trying to hook up a dap-1522 to an SMC8014WG wireless router. All goes well for about 10 minutes then the SMC drops all wireless connections except the connection to the 1522, and loses internet connectivity.There are several other wireless devices connected to the SMC but none of them causes it to go down.
View 6 Replies
View Related
May 14, 2013
I have a DIR-655 Rev B1, FW 2.01 (I will probably upgrade the FW tonight to the latest.)
I have at least 20 items that connect wirelessly to this router (2 PCs, 2 Laptops, 2 Tivo Box, 3 Game Consoles, 3 Cell Phones, 2 Tablets, 2 TVs, Printer, AP Gateway, and some other projects) It's been a solid connection to everything for the past couple of years.
I bought a new Dell Inspiron 15r SE laptop (uses the Intel Centrion Wireless-N 2230 Wifi Solution.) After anywhere from 2 - 10 mins of browsing/watching a video/downloading files the access out to the internet simply stops.
At this point I'm still connected wirelessly to the router, and if I go to the router address I still have access and can login and see the router settings. I check and there's plenty of time left on the lease (days.) Still not getting internet access. Eventually my Laptop will disconnect and reconnect (or I do it manually.) I've performed hard resets of the router, I've had my laptop Forget the network and then reconnect, etc. Nothing has resolved it.
I thought it may be my laptop, but I've taken it to Starbuck, Work, Neighbors WiFi, etc and I don't have any problems staying connected on their networks.
I've had Dell on the line, we connected hardwired, and there solution was to force forget and reconnect to the router, which worked for the 10min he was on the line with me, but then failed soon after, and back in the same connectivity hell
View 4 Replies
View Related
Jun 4, 2012
Every few hours, the WAN just shuts off. If you were connected to it when this happens, you cannot reconnect until you have reset the router; you can't even find the SSID. If you were not connected when this happens, you can connect just fine. This happens with all devices in the house, my laptop, my DAP-1522, my cell phone, and my brother's Mac (SMH, sometimes I think we aren't related...). I am running version 2.00NA on B1 firmware.
View 3 Replies
View Related
Nov 10, 2011
I have the Dlink DIR 615 router, windows 7, and this morning, it suddenly started to shutdown and restart, over and over. I unplugged all ethernet connections, shut down, etc. and slowly added the PC, then the phone, until when I plugged in the Western Digital 2TB My Book live, it would begin the same restart process. I can now repeat the issue by unplugging, and replugging the drive. I have had the network drive for about 3 months, and this started today.
View 6 Replies
View Related
Jan 28, 2011
I just built my first comp and everything is up and running..no problems for about a week. but now my internet is slow... like 10 ks slow.i am on satalite internet with my comp on a lan cable to the router. my wife's laptop is wireless.. both seem to run fine with explorer etc, but when i try to download updates for games or comp, all but stalls out.
View 16 Replies
View Related
Oct 2, 2011
I heard that it is possible to surf on the Internet during a flight not long ago but I do not really know whether airlines really offer such a service. Do you know any airline? I would like to book a flight but found nothing on this website concerning surfing on the Internet during the flight.
View 1 Replies
View Related
Jun 9, 2011
What you can try:Diagnose Connection Problems,This is what is displayed evry third or fourth page when I surf...I could just be finishing a survey and bam this pops up and when you have 56 K dial up and your computer is already slow, you dont need this slowing you down....what can I do ? I am afraid to do my online banking....
View 11 Replies
View Related
Jul 25, 2011
Does ZoneAlarm's tvDebug log file record the websites I visited? And if so, how do I delete it?
View 3 Replies
View Related
Mar 30, 2013
I have an Amilo Pa1510 (Windows XP) and I can connect to the router but not surfing (browser doesnt load any website). I have tried the commands "ping" to my IP address and it works but ping to the default gateway IP address doesnt work either.I am using the same wireless connection right now with my smartphone. I have downloaded an app that executes the ipconfig command in my Android. I have used the same gateway IP address in my laptop but it didnt work either. I have tried to set automatically the IP addresses in my laptop without success too. I have turned off and on both laptop and router and also checked in the system window that all the processes such as DHCP and DNS servers are automatic and enabled.
View 4 Replies
View Related
Dec 8, 2011
In one of my 2911's I have a VWIC3-4MFT-T1/E1 that terminates two pri circuit.s0/0/0:23 and s0/0/1:23 are in a trunk group. I've noticed that if the PRI flaps/bounces and comes back up, controller 0/0/1 and serial 0/0/1 stay down.Controller 0/0/0 and serial 0/0/0 always come back up. I have to restart the gateway everytime for 0/0/1 to come up. Thoughts? Interface config is below.
View 8 Replies
View Related
Jan 24, 2012
I might fancy having my desktop stay in a sleep state, waking whenever I need to access it for a file or something, so I tried to use WOL. The nic and bios support it, however when I enable it...
The machine only stays off off for 5-10 seconds at a time. I think this is because instead of waking from only a magic packet, it is waking from ANY packet.
View 1 Replies
View Related
Jan 19, 2012
Where I tried to conect to my home wifi or the school's wifi and it just says "identifying" on the network connections and on the list of wifi networks around in the notification area it says "No internet acces" and can't connect to the internet. I stoped trying to look for a solution but I don't have internet at home
[code]....
View 5 Replies
View Related
Jan 18, 2012
Issue: Working on the internet, my computer (LAN) disconnects, Laptop (WAN) disconnects, but the router does not disconnect. The light that shows connection to net flashes like crazy (showing ADHD *** activity), the network lights just stay stable (showing no activity).After 5-10 minutes the problem sometimes fixes itself, or, more likely, I unplug the router, wait 2 minutes, plug it back in. Sometimes it works right away, sometimes it takes a second unplug.My computer is wired to the router which connects to a modem. The modem is not mine, its installed by my ISP.
Failed attempts to fix:Replace router. Bought brand new Netgear (will put numbers in here later) to replace the Dir-825.Same issues.In fear of malware, spyware, etc (I run a tight ship on my computer, I love it dearly and I'm mildly paranoid), I formatted the SSD, reinstalled Windows 7 64bit. Same issues.My ISP has to authorize every connection, so I've used the router to use my Mac Address and I can connect with the cable directly in the back of the computer, or to the router
View 12 Replies
View Related
Nov 1, 2011
3502i's LED light turn white? Ifso, what does it mean? The info on the LED lights does not mention white. The serial port and the data port are non responsive, but the unit stays powered over PoE.
View 22 Replies
View Related
Jul 19, 2011
I have an Asus U31JG with WIndows 7 64-bit. This laptop is a month old to me and the wireless has been acting up since the day I got it, will explain below. I believe my home network is the problem. I have a Linksys WRT54G with WPA Personal encryption. Multiple times a day my internet quits working even though Windows says it has full connection to my router. To fix this, I open command prompt and use "ipconfig /release" and "ipconfig /renew". This fixes the problem for me, it may be a minute or a few hours. The problem is very intermittent and only happens at my home which is why I believe it is my network. However, I changed the wireless channel to 1, the only one around on that channel and tried different security settings. My WiFi works flawlessly if I take my laptop to my friends house where he has a Netgear router. I have also tried a brand new Cisco Router as well as a Netgear router at my house.
I've re installed the driver twice, and the same problem persists in Linux only I just have to disable/enable wireless.
Note: When the internet quits working on my laptop it works on other devices so it is not the internet connection causing this. And my internet is very slow when it is working on my laptop via wireless.
View 9 Replies
View Related
Jul 17, 2012
So I went to update the firmware on my SA520 last night and aparently something failed, the device restarted and now it doesn't respond to anything. The Diag light stays light and the factory reset button does nothing no matter how long I hold it in. Is there another way to reset the device?
View 2 Replies
View Related
Apr 5, 2012
I have an MPLS router that connects to the core network.This router distributes (per route maps) routes from OSPF into BGP and from BGP into OSPF.The OSPF Process conencts a 6509 to the 7206 MPLS router. There are some routes in the OSPF process that I have filtered out of the 6509. They do not show up inthe 6509 at all and this is the only way they can be getting into the 7206.Checking the 6509 database, this route is gone, but it stays in the 7206 until I clear the route manually. The result is the route still gets distributed into MPLS. [code]
One thing to note, there are two possible OSPF paths the route gets into OSPF, one of them, the route is filtered with distribute-list on the 6509, which means it is still in the database, so it is still in the 7206 database, and still get distributed into BGP on the 7206, correct?
View 3 Replies
View Related
Apr 25, 2013
What do I do if my routers light stays amber and wont turn blue? The wifi is not working because of this even though it is saying the signal strength is excellent and I have already done the reset a bunch of times its been two days and I just cant get it to work. Its the N300 router
View 2 Replies
View Related
Jun 16, 2011
I've a Cisco 5550 which hangs on powering up and stays at " Booting System, please wait..." forever and it has a flashing green Status LED.
The steps I've taken so far are:
1. Consoled with a different computer and tried to send the break signals (didn't work)
2. Open up the unit tried to remove the RAM's and reseated them again.
3. Taken out the CMOS battery on the board and replaced it with the new one (no luck still)
What is the next step, or shall I assume that the unit is dead.
View 1 Replies
View Related
Apr 10, 2013
I recently upgraded my ADSL to a 1Mbps line and I got a new Fritz box(7390) with it and i bought a linksys ae3500 wireless router. I am using Bit comet to download my torrents and my listen port stays at a yellow light. I previously had only the Fritz box 7170 and my listen port was always green.
View 1 Replies
View Related
Feb 6, 2011
We have some Windows 7 clients that are running the 4.8 agent. NAC will process the user and move them to the trusted vlan. However, the agent stays open and appears to keep running/processing something. THe user can minimize the agent and work normally, and a reboot appears to fix the issue.
View 5 Replies
View Related
Feb 5, 2013
This has been going on for a few months now, but I'm just finally getting around to finding out the issue. So basically, this is what's happening; I'm randomly browsing some pages just fine, then I try to go to another page, and I can't load the page. I try to open a new page after that, it won't load. My internet still says it's at full bar internet access. I can somehow still use pages that are open (Such as a chat program, I can still chat in there, but I can't load any pages) for as long as a few hours after the internet supposedly shuts off. Everybody else in my household doesn't, and hasn't ever had this problem before, so I seriously doubt it's the modem. I've tried moving my laptop into those places to see if it's a problem with reception in the area I'm at, though it doesn't. The only thing that will turn the internet back on again, is a computer restart. After a fresh restart, the internet will last anywhere between 4 hours to a couple of days before doing that.?
View 4 Replies
View Related
Jun 5, 2011
My pc has been running perfectly fine. My only problem is that it suddenly shuts down whenever my internet disconnects at random. i am totally clueless of what's happening with my machine. it worries me a lot for I think improper pc shut downs may cause damage to the hard drive. I use internet thru DSL service. My pc specs are as follows; AMD 64x2 dual core processor 5200+, 2.71 Ghz,120G seagate sata hd, 1Gig RAM,Nvidia Geforce 6150SE.
View 1 Replies
View Related
May 27, 2011
I have Comcast cable internet routed through a linksys E3000 router. My desktop is connected to my router via ethernet and my various other devices including my laptop are wifi connected. It seems almost at random that my desktop will lose its connection.Windows will show me as still being connected and my network connection will show a normal status until I atttempt to repair it then it will change to limited or no connectivity. Through all of this, my other devices all still have a wifi signal (I don't use more than 1 or 2 at the same time). I can reconnect to the internet by unplugging my ethernet cable then reuplugging it back in and my connection will start working again. I've also had several blue screens, and when I checked the dmp files it revealed my network card driver as the culprit, yet I have reinstalled and even clean installed the microsoft signed driver. I have also attempted to reboot both my modem and router to no avail.
Microsoft XP
Marvell Yukon ethernet adapter on a biostar mobo
C:Documents and SettingsMain>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : sn1
Primary Dns Suffix . . . . . . . :
[code]...
View 5 Replies
View Related
Apr 8, 2012
I did some testing with a few wireless N routers and then decided to buy a Linksys e 2500 as it was on a special for $66 in Australia.The wireless routers i tested were (Belkin brand new model / Netcomm & Dlink Used ones)1. Netcomm N800n Fastest wireless transfer speed 9MBytes or 72 MBPS.2. Dlink - Around 6MBytes/s or 48MBPS.3. Belkin - Around 4-5 MBytes/secDid not test the Linksys before buying it.4. Linksys E 2500 - around 5MBytes/s = 40MBPS.After all this testing, got a new Linksys believing that a cisco device should have good quality.My problems is that the connection speed on the device stays a 72BPS whereas on the Netcomm / D-link it used to be 130mbps. Not that this bothers me, however the file transfer speed matches the Link status connection speed.The router was placed at exactly the same location, file transfer was checked by transferring large file sizes.Lan setup is1. Belkin ADSL 2+ (Modem with Wireless b/g and Voip) only being used now as an ADSL Modem and VOIP service.2. Cisco linksys e 2500.3. Media centre PC which has a wired connection to linksys e 2500.4. Main PC (Connected wireless to the linksys). The network adapter is a DLINK DWA125 N150 adapter (2.4GHZ only). The distance between the wireless adapter and the wireless router is approximately 12 feet and there is direct line of sight.5. IPAD.5. Using 2.4GHZ as i dont have a 5GHZ adapter yet. Router is only on wireless N mode.I was better off using a second hand Netcomm rather than a brand new Cisco router. The cisco router has 4 internal antennas, whereas the netcomm one had only 2 external antennas. My signal strength is excellent. Only problem is the slow internal transfer between the Main PC and the Media Center PC. Main PC is Core i7 950 where as the Media Centre is a Core 2 Duo e6400GHZ with 4GB Ram. Both PCs running Windows 7 Ultimate (Main PC) , Professional (Media Centre PC). My network knowledge is decent. Is there any settings in the advanced Wireless mode for the Linksys that can make my internal file transfers faster. [code]
View 4 Replies
View Related
Apr 25, 2011
for no reason my dell comp.shuts itself down with no warning..goes into power save maybe
View 1 Replies
View Related
May 30, 2012
I'm currently using a MI424WR Rev F router, with a Motorola SURFboard SB5120 cable modem.If I connect directly with the cable modem to the PC, the internet works perfectly fine. But the issue is I have 3 connections, (2 wireless, 1 wired)Okay when I connect my modem to the router (Ethernet into WAN, blah blah) the modem suddenly loses signals. I've noticed this on the modem's status page. (192.168.100.1)The downstream power level would constantly change, and the modem will lose the Known CPE MAC Address. (When connected to the router)In order to fix the problem, I would need to connect directly to the modem and reset to the factory settings and wait out the 30 minutes.
here's my current status:
2 Coax Splitters
Comcast Cable Provider
A Verizon Router (Capable until this point)
View 1 Replies
View Related
Feb 8, 2012
My problem lies with my router shutting off when my computer goes to sleep or is shut off in any way. I even tried unplugging it, which is not good at all for it. I use my router for several other wireless devices so this is bad. I use a Motorola modem that fits to a D-Link router. The modem appears to stay on when I'm having trouble. the route5r is a "DIR-655 Xtreme N Gigabit Router"
View 6 Replies
View Related
Aug 27, 2011
Every time I boot my computer, the internet is working fine and shows no signs of anything wrong, but after loading so much (several minutes of a YouTube video, or just idle data coming in from other sites I'm on) it just comes to a halt and nothing can get through. At first, I thought that this was my school's internet being bad since I had just moved back into the dorms today. The problem with that is that I seem to be the only one having a problem like this. After so much time, depending on how much bandwidth I'm using (I think, this is just based on observation), it just drops the internet completely and won't start again until I reboot.What I've found so far is that I can't seem to get an IP address after the service stops, but I don't know how I could connect that to anything.
View 1 Replies
View Related
Jul 31, 2012
I have several remotes sites connected to "home" with Cisco 891 routers at each remote site."Home" actually consites of two different data center sites, each with a Cisco 3845 router terminating the IPSec tunnels there. One home site provides VOIP phone service, the 2nd home site provides PC Data.Each 891 router has two IPSec over GRE tunnels configured, one tunnel goes to the VOIP home site's 3845 router, the 2nd tunnel goes to the DATA home site's 3945 router.All of my pre-existing 891 routers are still running IOS 12.4(22)YB5, and are working fine.My newest 891 router, purchased recently for a new remote site, shipped with IOS ver 15.0(1)M4, and when I have both tunnels configured similarly to the others, both tunnels come up and everything seems to work fine, but if I disable the VOIP tunnel with the "shutdown" command on the tunnel interface for VOIP, then the data tunnel will not come up at all, with full verbose crypto logging turned on, I never even see an attempt to bring the data tunnel up, and when I issue a "no shut" on the VOIP tunnel, both tunnels come right up. This behavior is not seen on the original 891 routers still running 12.4. I can shutdown the VOIP tunnel and the DATA tunnel will come up, stay up just fine.I really do not need the VOIP tunnel at this new remote site for the immediate future, but would like to keep the configs in place for the future, and also to keep all my 891s configured identically (different ip numbers of course) for consistancy's sake and easy of management.Do I need to install 12.4 on this 891? I'd rather keep the IOS on it that it shipped with.
View 2 Replies
View Related
Dec 28, 2012
i have a dell inspiron n5050. i bought it 2 months ago. when i bought it i could connect to any wireless i wanted. 2 or 3 weeks later i restored the system to previus date because i had installed a couple of games which when i unistalled, i noticed that my computer was toooo slow.. after that when i try to connect to ONE specific network my laptop crashes the router and whoever is connected to it gets off. i don't have this problem with any other wireless. i have contacted the internet service and we fegured out it isn't a router problem.. by the way (and i don;t know if this is of any significance) this ONE specific network is the first network i entered when i restored my system. i run win7. for any more details ask.
View 16 Replies
View Related
