DWL-2100AP / Connecting 2 Repeaters To AP
Apr 21, 2011
I need to setup wireless acces at the warehouse at my work. I have 3 D-Link DWL-2100AP's. 1 is connected to a switch and working properly as an access point. I was able to get another working as a repeater (WLAN light on) but cannot get the 3rd working as a repeater. I configured both repeaters the same way but with different ip addresses. (AP- .10, Repeater1 - .11 and Repeater2 - .12).
I guess the main thing I'm not understanding is how the 2nd repeater connects to the first repeater. Is it supposed to connect to the 1st repeaters MAC or to the AP's MAC? If I unplug the AP, the 2nd repeater won't pick up the 1st repeaters MAC. Both repeaters were connected to the AP. basically Switch -> AP -> Repeater -> Repeater.
View 5 Replies
ADVERTISEMENT
Jul 21, 2011
How to configure dwl-2100ap router
View 1 Replies
View Related
Jan 20, 2011
I have bought 1 Dlink Dwl 2100 Access Point about 1 week, it working with ( Default Gateaway 192.168.1.1) but I want connect with 2100Ap But I get Ip from my Livebox Orange.Can I get Ip From 2100Ap (Default Gateway 192.168.0.50), not by LiveBox Orange (Default Gateway 192.168.1.1).My brother live upstair (with LiveBox) I Live ground Floor and connect to Cable Utp cat5 form upstair to ground Floor. In my room I have a Switch connect to 2100Ap.
LiveBox Orange Default gateway is 192.168.1.1
Dlink dwL 2100Ap Default Gateway is 192.168.0.50
My os is windows Xp sp2
View 2 Replies
View Related
Jun 10, 2011
How to set up D link DWL 2100AP as wireless router?
View 1 Replies
View Related
Feb 22, 2012
My Access Point Power Led blinks constantly, Lan led works normally, Wlan led never turns on.
Access Point: D-Link DWL-2100AP
View 6 Replies
View Related
Jul 25, 2012
I have radio link where i work. Connections have been made to other pcs with an 8 port switch. from that switch i have extended another wire which is nearly 90 mts. that connection iss again connected to several pcs and working fine. But i have again extended another wire of about 90 mts from the 2nd switch. All other connections are working fine on the second switch but there is no light on the switch for the extended one.. Where have i gone wrong? Do i need to place repeaters instead of the second switch??
View 2 Replies
View Related
Aug 23, 2012
Can I connect 2 or more wireless repeaters to the same wireless base station signal to extend wireless coverage? I.e. The base station is located in the centre of the building and the signal covers the middle but not the extreme end of the building. I would like to add a repeater on each opposite sides of the signal's reach so it covers the complete building. I can't use LAN cable and the building has different electricity supply to the 3 different part of the building so can't use the mains to carry the signal. Is this possible using wirless repeaters or do I have to use wireless bridge units to connect to the base station and then output with wireless access points attached to the bridge unit to extend the wirless signal?
View 6 Replies
View Related
Oct 22, 2012
I'm currently contemplating on purchasing a 2nd WRT54G router with dd-wrt as a 2nd wireless repeater in the house. Just wondering if this would be possible. Current setup is Main router (D-Link DIR-615) on 3rd floor > WRT54G as wireless repeater on 2nd floor. I don't mind the loss of connection speed since the main purpose is to increase coverage to the 1st floor.
View 4 Replies
View Related
Jul 20, 2011
I have an old metal-walled mobile home that I plan on converting to a combination shop and man-cave; it's about 200 feet from my home's computer room, where I have a Netgear WNDR3400 wireless-n router. The only place in the trailer where I can "see" my home network is the kitchen window, and I thought about putting a Wi-Fi repeater there to extend the home network into the trailer. But I have read that using a repeater will cut the network's Wi-Fi throughput in half -- which would not please my wife and daughters back at the house. Is there a simple, relatively inexpensive way to extend the network to the trailer without slowing everything down? Eventually I may have Charter install a separate cable hookup there, which would allow a separate high-speed Internet connection too. For now, I just want to "share" Wi-Fi to the trailer.
View 6 Replies
View Related
Aug 22, 2011
We have 4x WAP4410N access points 1 AP & 3 Repeaters, this works perfect. The situation at the moment is that the internet connection is plugged in with a cable on the AP but the question is that if it's possible to plug the internet connection into one of the repeaters?
After that are we still able to use the internet over al four access points?
View 1 Replies
View Related
Apr 3, 2012
Here's the current configuration in our organization (which I believe is incorrect):We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly).
My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place!
I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.
View 1 Replies
View Related
Mar 23, 2012
I bought a tp-link WA701ND and a netgear WGR614. i wish to pick up signal using 701 and then let 614 repeat it. no more tech support coz im already broke.
View 1 Replies
View Related
Nov 28, 2011
What are procedures to deactivate di-604+di-704 routers+make the repeaters,connecting each of them,in a wired fashion,to my Belkin wireless N router?
View 1 Replies
View Related
Apr 1, 2012
I connect to my corporate network using Cisco AnyConnect Secure Mobility Client. Once connected I can no longer print to my LAN attached printer and other local resources. I use the Cisco/Lyncsys E4200 router on my LAN and can re-connect to the storage on the local LAN by setting up Port Forwarding of port 21 and MS Windows FTP folder sharing. However, I can't seem to connect to a Terminal Services client by forwarding port 3389. Is there a way to connect to the local LAN after logging into the VPN connection. I can connect to regular HTTP/HTTPS sites and most other type of connectiins, just not my own local resources.
View 3 Replies
View Related
Feb 4, 2011
When I first installed my Netgear N600, my new LG 570 BluRay hooked right in. Ten days later, no dice. Tried rebooting everything, in the right order. Still nothing.
View 3 Replies
View Related
Jul 25, 2011
Is it possible to connect two different ips together? A proxy server : 192.168.1.1. All the connections are going through this Server, everything is working fine if the ip range is 192.168.1.XXX Now, when i changed the ip range from 192.168.1.XXX to 192.168.2.XXX im not able to access network, Note: default gateway is the proxy server itself..
View 2 Replies
View Related
Aug 22, 2011
how can i connect two different lans of ip addresses of head office in 192.168.10.series and branch 1 192.168.11.series, branch 2 in 192.168.12 series, branch 3 in 192.168.13. series. head office and the branches are connected with wireless
View 1 Replies
View Related
Aug 15, 2011
We have three computers (one of which acts as a file server) plugged directly into an internal office network. Then we have another such connection leading to the WAN port of a router which shares a single connection among another 5 or so computers & laptops. So the WAN connection is providing internet access AND access to the file server.
Since upgrading to a new router, it is now not possible to "see" the file server from the computers connected to the router, although the internet can still be accessed without a hitch. This has now become infuriating as I've spent several hours changing all possible router & IP settings to no avail.
View 6 Replies
View Related
Nov 12, 2012
i have the network key and its connecting to the network but wen i try go onto the internet it comes up cannot display website or somthing likt that..it came up sumthin about .netframework aswell i don rele ave a clue wat to do next.
View 1 Replies
View Related
Aug 27, 2012
I'm an experienced user with pcs but an absolute newbie with networking, so apologies if this is in the wrong section. I've moved into a new house that has a wireless widi (sp?) that my flatmate uses to play videos from his laptop on the tv. I asked if he still has the software he installed when he got it but he doesn't, and the software i've tried installing from searching the web hasn't worked. What should i do?
View 1 Replies
View Related
Feb 14, 2011
I've been looking around for more information on this topic but I couldn't find quite the specifics I'm looking for.In the most basic text, I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other.I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.
View 1 Replies
View Related
Sep 20, 2011
I'm having an irritating problem with an internet USB dongle in my new computer. I connected the dongle to a working USB port where the computer installed the drives/program that existed on the dongle. However, when I start the program it says no device found. I tried pulling out the USB and then plugging it back into the USB port whereas the computer first gives me a "pling" sound that it has detected the device and immediatly after that sad sound that says the device has been pulled out even though it's still securely in the USB slot[CODE]
View 2 Replies
View Related
Jun 29, 2011
I bought a VPS from a reputable company and all was well untill last night. I am unable to connect to my VPS via SSH, VNC or even my Plesk Power Panel directly. I Can connect to Plesk power panel through a web-based proxy ( like daveproxy ).The error i get when trying to connect via SSH is: "Network Error: Software caused connection abort"VNC error: ReadExact: SocketIPv4 error while reading.
View 1 Replies
View Related
Jul 21, 2012
Still trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. I read the thread on the Plesbit network but not sure I understand his issues. Seems similar to mine though.
View 1 Replies
View Related
Mar 31, 2012
ive googled over the past last hour and tried everything i found. But nothing worked. So here i am once again asking the geniuses of TSF for their amazing support recently installed VNC on both my laptops, specs below[CODE]
View 15 Replies
View Related
Jul 29, 2011
We just moved, and the family room (where the desktop is) had no coaxial outlet. The exterior box is at the other side of the house, and instead of wiring around our entire home, cable guy said we could easily set it up where the previous owners did (living room), and use a Netgear USB to make the desktop wireless.At Best Buy, I was told to buy Netgear N600 Wireless Dual Band USB Adapter WNDA3100 for $50. I install with the cd, and then plug in the USB as it suggests, and it just blinks from yellow to blue, not picking up my netgear wireless router in the other room. I go back to Best Buy, and they say that I need to buy another thing, now it's Netgear XET1001 85 Mbps Wall-Plugged Ethernet Adapter for another $70.Plugged one unit into the wall, and then plugged it into the Netgear Wireless Router. This will give me a solid light for Power LED and Ethernet LED, and then the middle, Powerline LED is a solid blue. With the second adapter, I plugged that in to my family room (with the desktop) and attached it also to my desktop with it's cord. This one has a solid light for the Power and Ethernet LED, but for the Powerline LED it's off. So it's not finding the other compatiable key, if I put it in between the wireless router, and my desktop (in the hall or kitchen) it will have all lights on, but I can't connect it with the cord to the desktop, and the USB does not pick it up any point.
Now, I can connect with my phone to the wireless network anywhere in my house, including the second floor. However, I can not, with or without the wireless adapters, connect with my laptop to the wireless network. I've done wireless with my laptop since I purchased it a few years ago, and while it can "see" the network, when I try to connect I get an error message that it's unable to join the network, and is now out of range, even when I'm sitting right in front of my modem/wireless router. It doesn't prompt for the password, I tried to manually add the password under network properties but it did the same error.I just don't know what to do or to try next, I don't know if I've set it up wrong, I followed the pictures in the manual, which is all it pretty much comes with, and did all the installation disks. Without it though I can't connect with my laptop, but my phones can..
View 1 Replies
View Related
Mar 25, 2012
I would like to stat a net cafe, so how can I start that particular net cafe in one CPU with 5 monitor? Here I would also like to know, have there any kind of disturbance in five monitor if use different user in different way?
View 2 Replies
View Related
Jun 1, 2012
My primary DNS all of a sudden "disconnected" itself. I have tried flushing DNS and powering off the modem and turning it back on again after 10 seconds. It seems that these methods are not working.
View 5 Replies
View Related
Feb 12, 2012
how do I link up my blackberry torch And my ps3 with the wifi.I'm not get connected
View 1 Replies
View Related
Aug 18, 2012
I have moved my internet fro sky to virgin i still have my old router is it possible to connect them together so i get a better signal around my home.
View 1 Replies
View Related
Mar 3, 2011
When I got my Actiontec GT704WGB router/modem(It's one of those ones that doubles as a router/modem.) My ISP is Verizon. I have McAfee is my anti-virus. Every time I try to connect it says "A connection error has occurred: The connection point has timed out." I use channel 11, have a 64 byte encrypted WEP key. Yesterday I found a neighbors connection, connected just fine, and it had a signal strength of about 40%. Why on earth can't I connect to my ONE HUNDRED PERCENT CONNECTION BUT I CAN CONNECT TO A FORTY PERCENT CONNECTION.EVERYTHING can connect to my router EXCEPT my PSP. [code]
View 7 Replies
View Related
Nov 10, 2011
I have had troubles connecting my PS3 to my Orange livebox. At first, I had the problem that it could not obtain the IP address so I manually entered it. This solved the problem. However, I also manually entered the Subnet Mask, Default Router (Gateway), Primary DNS and Secondary DNS. Now when connecting, it says I have a DNS error.(80710102)
View 1 Replies
View Related
Mar 27, 2011
getting the 825 that the NAS device is plugged in?When I connect the NAS 323 it is not recognized and Easy search utility that comes with the 323 cannot find it. Lights on the router for that port do not light up either. Worked fine with my old linksys.
View 4 Replies
View Related