Home Network :: Configuration Of Adsl Router?

Feb 11, 2011

in my past days i am using bsnl broadband. and also using adsl router for net-connection. i am connecting internet through wifi adsl router. now i am not using bsnl broadband. now i am using beem broadband in hyderabad. that internet connection is directly to my laptop through rj45 cable. but i want to configure adsl router to my beem broadband because i want to connect internet through wifi.it is possible or not? if possible tell me the procedure.

View 2 Replies


ADVERTISEMENT

Home Network :: Sharing An ADSL Connection Using A Wireless Router?

Jul 6, 2011

I Got a new ADSL connection,They provided a ADSL Modem. To connect tot he ADSl i have to enter the username/password in the PC....in this case how can i make this ADSL connection to wireless? coz Me and my friend want to use the same connection.

View 1 Replies View Related

Home Network :: Connect A Netgear FS605 Directly To ADSL Router

May 12, 2012

I want to connect a Netgear FS605 directly to my ADSL router.However I find that this does not work unless I put my Netgear EN2005 Hub in between the Switch and the Router.The Hub is 10Mb/sec the switch 100Mb/s so I would like to eliminate the hub.

View 3 Replies View Related

Home Network Very Slow - Using Spare ADSL Router And Homeplug Networking?

Apr 17, 2013

Today I set up a home network:Cable router plugged in to......Homeplug network, (D-Link DHP-307AV/B 200 MBPS PowerLine Homeplugs) plugged in to a LAN port of......a spare adsl router configured as per here: Connecting Additional Routers | Tech Support Forum...with two desktop machines plugged into the LAN ports of the ADSL router.Both of the desktops have got similar specs, are equi-distant from the ADSL router, and are both connected using Ethernet, not wireless.One of them gets a 9MB/sec ADSL [URL]download, the other can't even bring the webpage up and times out if you ask Google to do a search.Taking out the adsl router and plugging the desktop straight into the homeplug gets a network speed of ~13MB/sec on [URL].Plugging a computer directly into the cable modem gives network speeds of ~40MB/sec on [URL] How can I improve on this, and have it so that both machines can access the Interwebnet at a decent bandwidth?

View 8 Replies View Related

Home Network :: Unorthodox Wireless Router Configuration?

Jan 5, 2012

Here's my situation:I live in a house that has AT&T U-verse. My pc is a couple of rooms away from the U-verse router so I pick up my Internet signal via a Netgear WG111v2 USB wireless adapter. Works great. But I have a couple of "new" Palm Pre handhelds with sync software that requires a wireless connection (won't do USB). Fortunately, I had a Netgear WGR614 v4 54 Mbps Wireless Router in storage. (I used it years ago so it had already been configured but back then it was wired directly to an AT&T router with a patch cable to my roommate's pc and to my pc wirelessly.)

So I just powered it up, plugged a patch cable into my pc's NIC and plugged the other end into the WAN port. Voila! I had connectivity to my Palm Pre's. All was well for about 15 minutes when all of a sudden my pc lost connection (wirelessly) to the U-verse router. And though the Netgear Smart Wizard showed a strong signal from the Netgear WGR614 Wireless Router and the Palm's were picking up a strong signal from it, they couldn't "surf" the Net.

I guess WinXP (being PnP) decided to adjust things causing everything to stop working. (Just a guess.I moved the patch cable from the WAN port to a LAN port. This enabled me to access the Netgear router wizard for the first time since I used it years agohttp://192.168.0.1) I couldn't access it earlier in this "endeavor" when the patch cable was connected to the WAN port. So this seemed encouraging. But no, it didn't work. Nothing was connecting to the Net. And the only way to restore my pc's connection via the Netgear USB wireless adapter to U-verse was to unplug the Netgear wireless router.

View 1 Replies View Related

Cisco WAN :: 2951 - SecondISP ( ADSL) Module Configuration Separate Network?

Mar 9, 2013

I have one of my customer have cisco 2951 Router with two ISP and two  ADSL module .i already configure one ADSL module.rit now customer want secondISP ( ADSL) module configuration separate netwok because customer have Access pont they want connect directly to router is it possible
 
1st ISP already running but customer requirement 2nd ISP superate network with Access pont  not redundancy

View 5 Replies View Related

Linksys Wireless Router :: Configuration Of 2 WRT160Ns - RT31P2 And EZXS55W To Home Network?

Mar 12, 2010

configuration of 2 WRT160N's a RT31P2  and a EZXS55W to a home network. The reason behind this is a two story house and running more cat 5 lines for future use.

View 3 Replies View Related

Home Network :: Wireless DLink Modem 2730U / Share ADSL Internet As Limited?

Aug 4, 2012

I have an ADSL connection using a wireless DLink modem 2730U I want to share my internet with my neighbour as limited speed and limited traffic.How can I do this? Is it possible as wireless?

View 4 Replies View Related

Cisco WAN :: ADSL Configuration On 887 Router?

Aug 1, 2011

I am installing a Cisco 887 to a ADSL2 Circuit and I cannot connect to the ADSL eventhough the show interface shows that both the ATM0.1 and Dialler 0 is up.
 
The configuration of the router is below.
 
Building configuration...
 
Current configuration : 5980 bytes
!
! Last configuration change at 11:12:58 PCTime Wed Aug 3 2011 by cisco

[Code].....

View 9 Replies View Related

Cisco WAN :: 891 - Configuration Behind ADSL Router

Jan 28, 2012

I would like to configure cisco 891 behind an ADSL Router(ISP one).The Details are: 

ADSL Router:
- DSL Connection: dynamic IP
- LAN: 10.153.66.1/255.255.255.128
 
CISCO 891
- WAN: 10.153.66.5/255.255.255.128
- LAN: 10.153.64.1/255.255.255.128
- Configuration:
 
WAN
interface FastEthernet8
description Singtel Line$ETH-WAN$$FW_OUTSIDE$
ip address 10.153.66.5 255.255.255.128
[code]....
 
I could ping to 10.153.66.1(ADSL Router), but I cannot connect to the internet.

View 4 Replies View Related

Cisco Router 877W ADSL Configuration?

Nov 18, 2012

While i was looking around in my stuff in the office i have found a Cisco 877W ADSL router .. so i have decided to use it instead of the one i am using now which is provided by the ISP that's made by Huawei.Anyway i have a good knowledge about basic cisco router configuration but i had never configured ADSL Cisco router, so i looked around on Cisco website, and i was lucky to get this two linksCisco DSL Router Configuration and Troubleshooting Guide - Step-by-Step Configuration of PPPoA with a Dynamic IP Address - Cisco Systems[CODE]

View 7 Replies View Related

Secure Wifi Configuration On Beetel Adsl Router?

Dec 31, 2011

I want to setup secure Wi-Fi on my Beetel ADSL modem/router. What are the parameters which I need to setup through the modem web interface?

View 1 Replies View Related

2 Apple Airport Extremes - Netgear ADSL Router - How To Setup Home Networking

May 21, 2011

Currently, I have 2 Apple Airport Extremes, and 1 Wireless Netgear ADSL Router. The 2 AAEs are connected separately to the router, and this allows us to get coverage in most part of the house (it's a large house with concrete and granite walls). I also have a HP Officejet 8500 'wireless printer' that is wired to the router as you can only print to the printer when it's in standby with a physical connection to the router (that's a different story). So my goal is to replace everything as the router is slowly dying and as a result of this, I want to be able to access the Internet wirelessly throughout the house, and be able to print from any where in the house without anything connected via cables. And as a bonus, I would like the Internet to be accessible 100 yards/metres down the garden (workshop is there). Basically, blanket coverage!

View 3 Replies View Related

ADSL Wireless Router Configuration With Ethernet (rj45) Internet Connection?

Dec 2, 2012

I have this adsl wireless router but my internet connection only has RJ45 directly connected to my PC. My questions is how can I use my ADSL wireless router with this kind of internet connection.. because I really want to make my connection wireless..

View 1 Replies View Related

Home Network :: Double Protection Network Configuration?

Nov 21, 2011

I have a problem with my home network/internet - I have a working wireless network that I have used for some time now and it works just fine. the problem is that internet restrictions where I live require me to register each unit to the building network before I can gain access to the internet. My caretaker told me today that normally, I only should register my primary computer and the wireless router to be able to use the internet freely. However when a new laptop appears( I have a guest), I can easily connect it to my own wireless, but it can't use the internet, as if it needed to be registered again. I ran out of registration codes and I really would like to have freedom i connection opportunities. The caretaker said that the system gives every registered unit a "fake" IP, so after giving it to mu router, all other units connected through that router should have unlimited access. Is my network configured in a wrong way? I don't know how to ask this in a more simple way... I just want to be able to connect a friends laptop to the net with just my local password, which isn't happening.

View 3 Replies View Related

Home Network :: Why Won't Static IP Configuration Work

Jul 2, 2011

I'm connected through a simple non-configurable switch to a 172.20.0.0. 255.255.0.0 network, with a gateway of 172.20.2.2.

When i use DHCP, i am able to connect to the web.

When i change my ip address to a static address (with an available ip address and correct subnet mask and default gateway) i am unable to connect to the web.

View 7 Replies View Related

Home Network :: AirTies 4450 Static IP Configuration

Feb 25, 2012

I have a router manufactured by AirTies,the model is Air 4450.This has the capability of being an Access Point in a current network, which is how I want to use it. (Introducing it into my current Sky Broadband network with a Sagem F@ST 2504N router).However, I cannot access the configuration page whatsoever.The manual states the default IP address of the router is 192.168.2.254, so I have set my laptop to a static IP of 192.168.2.100 and patched into LAN port #1 on the rear of the Airties 4450, powered on the unit and cannot access the router at all.I have held down the reset button several times to no avail.how I can configure this unit ?

View 2 Replies View Related

Cisco Firewall :: ASA 5505 Configuration For Home Network

Sep 4, 2012

I've been trying to configure a cisco ASA 5505 for my home network but I'm not having much joy with it. I've looked at countless guides, tutorials and followed the ASA setup wizard in ASDM. The Cisco 1841 is running sub-interfaces for my VLAN's.

View 4 Replies View Related

Cisco WAN :: Connecting ADSL Line On HWIC-ADSL On Router 2901?

Aug 24, 2012

i have a problem with my adsl line connected on a HWIC-ADSL on router 2901 it was working good until yesterday   the atm interface is down but the interface dialer is up .i connected this line into home adsl modem and the line is working good?

View 2 Replies View Related

Router Configuration For Home Server

Oct 9, 2011

I'm trying to run a server for a java application called mekwars. The program needs ports 2347 and 4867 open. I have obtained an ip address from my ISP and registered with dyndns. I can ping my public ip address (my router)I can access my server from any other computer in the LAN. My router is a Zyxel p660hn-T1a. I have configured port forwarding of both ports to my server.I have disabled the firewall in the router and restarted it.My server is running CentOS 6. I have opened the ports in the server iptables, I don't think this is the issue as I can connect from my lan to the server.When I try to connect (from within my lan) to the public ip address of my server the program tells me it cannot find the server. I can't telnet to port 2347 and nmap tells me that the only ports that are open are 22, 23 and 80 ( I believe this are open by default on the router to allow remote management).I can telnet from the lan. My networking isn't great and I'm used to having an "ip passthrough" option on the router to assign to my server. I do have it set as the default router in port-forwarding so I had hoped this would be a similiar option.

Do I have to set a static route in addition to port forwarding or could I have port forwarding configured incorrectly? I'm also considering the router may be at fault and I've emailed my ISP to make sure they're not filtering the ports before they reach my router.

View 2 Replies View Related

Cisco WAN :: 837 - Simple ADSL Configuration

Feb 11, 2011

I need to configure ADSL on my 837 Router with simple configuration. The WAN IP address is dynamic from my ISP. I checked many websites and found different configurations everywhere. I don't know which is best suited for me. I used SDM and configured ADSL. When i checked the configuration from console i found that there is atm0.2 and dialer 2 configured with my settings. I cannot understand what is the purpose of atm0.2 and dialer 2 when atm0 and dialer0 are there. Is there a doc on ADSL config on 837?
 
interface Ethernet0 ip tcp adjust-mss 1412 exitinterface ATM0.2 point-to-point no shutdown pvc 0/35  pppoe-client dial-pool-number 1  exit exitinterface Dialer2 exitdefault interface Dialer2interface Dialer2 ip mtu 1452 no shutdown ip address negotiated dialer pool 1 dialer-group 1 encapsulation ppp dialer idle-timeout 120 dialer fast-idle 20 ppp authentication chap pap callin ppp pap sent-username username ppp chap password 0 password exitdialer-list 1 protocol ip permit 

View 1 Replies View Related

Cisco WAN :: 1841 WIC 1 ADSL Configuration

Dec 12, 2011

I am configuring a 1841 router for use in small out office. I will use the s0/0/0 for main WAN T1 connection. I then wanted to use the ATM0/1/0 WIC-1-ADSL card as a failover. I am using weighted static routes for failover. Fe0/0 is LAN interface. When I go into SDM and look at the ATM interface it says this configuration is unsupported? 
 
1. Can't I just get a DSL modem and connect it to fe0/1 and not use ATM WIC and use below for failover?
2. If I have to use ATM WIC what needs to be configured for it to work with Att aDSL?

View 1 Replies View Related

Cisco WAN :: 1841 ADSL Configuration With VPN Firewall?

Nov 27, 2011

I have a Cisco 1841 router with an HWIC-ADSL module installed. My ADSL connection is PPPoA with a dialer interface and I have been provided 6 ip's from my provider to use on this service. Previously I have connected Fa0/0 on the 1841 straight onto my network and used NAT and ACL's on the 1841, I would now like to change this and have Fa0/0 connected to a Palo Alto firewall and use the Palo Alto to provide NAT, Firewall & site to site VPN functions. What config would I require on the 1841 to allow me to use one of my ISP IP addresses on the Palo Alto to allow it to be a VPN endpoint? Do I need to configure the 1841 in bridge mode?

View 3 Replies View Related

Cisco :: SOHO 97 ADSL Configuration And Port Forwarding?

May 15, 2012

I have an ADSL connection which I would like to have my Cisco Soho 97 ADSL router configured to dialup and forward to port 8080.

My network is 192.168.1.0/24
Router is 192.168.1.1
Server is 192.168.1.4 - Default gateway is 192.168.1.1

I am able to connect using the script below and get a public ip address but i cant get it to connect to the internet?what command to use for port forwarding to 8080?

hostname Router
!
!
ip subnet-zero
ip name-server 212.23.8.1
ip name-server 212.23.3.1
ip dhcp excluded-address 192.168.1.1

[code]...

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: Configuration ADSL For TD-W8968

Feb 7, 2013

Region : Brazil
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Telemar Oi Velox

Very weird situation... can't get full speed with the TD-W8968 with my DSL link..

View 12 Replies View Related

Cisco WAN :: 887 ADSL Configuration With Static NAT For Mail Server?

Feb 8, 2012

I have configure 887 ADSL router with attached configuration. But users cant access internet properly. (Ex: yahoo and gmail mail cant access)

View 8 Replies View Related

Cisco WAN :: 1841 Basic ADSL Configuration Guide

Aug 5, 2012

I am trying to configure a Cisco 1841 to allow the users to access the internet. This is my first step with ppp. All the rest of the configuration is ok but I don't know how to setup the interfaces Dialer0 and ATM0/0/0.

Need very basic configuration that I can analyze and use on my device?

View 10 Replies View Related

Routers / Switches :: How To Connect ADSL And 3G Router On Network

Aug 7, 2012

I have one ADSL router that I have configured Port Forwarding on it, but the internet is very slow. I also have another 3G router and I want to use it for internet because it is much faster, but it cannot do Port Forwarding. How can I connect this two routers in one network such that ADSL router is for Port Forwarding only and 3G router is for internet only?

View 1 Replies View Related

Cisco Switching/Routing :: 881 SDSL With ADSL Backup Configuration?

Feb 26, 2012

i'm looking for a cisco 881 configuration with SDSL line as nominal and ADSL as backup.

View 9 Replies View Related

Linksys Cable / DSL :: Configuration Of WAG54G2 On Etisalat Adsl Fiber Optic?

Sep 30, 2011

correct settings > Configuration of WAG54G2 on etisalat adsl fiber optic

View 1 Replies View Related

Extend Network Using Wireless Link Between Two Belkin G / MIMO ADSL Router?

Oct 25, 2012

I've recently upgraded my internet provider to BT and received a BT Home Hub 3 as the new wireless router.Previous to this I was using a wireless Belkin G + MIMO ADSL router (model number F5D9630-4).There are places in the house where the wireless signal is very poor. Connecting to the internet using either of these routers is difficult in these spots. However, since the Belkin is now spare, I've been thinking about trying to use it as a low cost repeater (i.e. free) to extend the wireless range in the house.There are several good articles that I've found on this site which address the connection of two routers together (e.g. John Will's article on connecting two SOHO routers is a good example), but they rely on an ethernet connection between the two routers. Any way to establish a wireless link between the two routers to extend the range of the current wireless network.

View 9 Replies View Related

6867R - Network Cable Is Unplugged When Plug ADSL Line To Router?

Nov 20, 2011

I can connect to my router but not to Internet, it seams that ADSL line "disconnects" my LAN/WLAN this issue is with Inalambrico 6867R router an other router, TP-Link is working great

View 1 Replies View Related

Home Network :: Advanced Home Network Setup (3 Subnets) And Port Forwarding?

Feb 24, 2013

I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:

- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface

Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.

- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.

- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.

Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.

Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)

Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved