Home Network :: Internet Is Not Working While Using 24m Cable?
Aug 10, 2011
I have a modem which is allowing me to go online at home. Unfortunately, the cable that goes with this modem is too short (just 2m).This week, I bought a cable (internet cable) of 24m and I expected to be able to move around while being connected and surf the internet but internet does not work when I am using the new cable. We have tested the cable (using a cable tester) and the cable seems to work fine. When I use back the old cable (which is very short) internet is working perfect.
View 15 Replies
ADVERTISEMENT
Nov 15, 2011
I just bought and received a Cat6 200ft Ethernet cable from Amazon, linkIt is going from a router to my PC and is not working. My old Ethernet cable works just fine from said router to PC. I do not know why this one is not working. I tested the cable out on my laptop and it works fine for that. I am not sure what info to post about my PC, but I am using an Asrock z68 Extreme3 Gen3 motherboard as my lan connector.
View 10 Replies
View Related
Nov 19, 2011
so I have this problem, the internet only work on one computer, whenever I connect to another computer it says something like: " Can't connect to IP 2, 3, 4 etc. I've tried resetting the modem, router and everything, it didn't work... Sooo, if I connect the same internet cable that's working on the computer to another one it doesen't work. What sholuld I do??, maybe change some settings in the router?
View 3 Replies
View Related
Feb 10, 2013
My computer runs bit torrent almost all the time, sometimes when I start Firefox the home page google never loads and neither do any other web pages yet bit torrent is still working as if nothing has changed. If I start a download in Firefox come back to the pc a few hours later Google doesn't load but the Firefox download still continues.What causes this is it DNS ?
View 2 Replies
View Related
Aug 26, 2011
After running my malware anti-virus and removing all the virus, my Local Area Connection keeps saying network cable unplugged. I checked the network adapters and everything is fine. When I did an ipconfig, there's no ip address showing. I have Windows XP. I've tried almost everything and it's still not working.
View 1 Replies
View Related
Sep 20, 2011
I'm currently in the process of buying the new property, which is in the build process and would like to put some cables across 3 floors, which would be connected to the router downstairs.
View 3 Replies
View Related
Jul 20, 2011
I have got a Linksys @ Home HG200 V2 G Gateway. I am trying to setup port fowarding but its not working. I have gone onto the routers port forwarding setup page filled it out but the port is still closed.
View 4 Replies
View Related
May 8, 2012
I am currently wanting to make a wired network to save buying a wireless router. The house is unfinished so holes can still be made. I need network modular outlets in 8 rooms, I want to use some type of ethernet cable and connect wire them up to a multi outlet on a wall elsewhere. So I can connect to these without there being loads of wires everywhere. The problem is I don't know which ethernet wire to buy and also I don't know which outlets, tools etc. I need to buy also. I preferably would like the network to have speed of about 1gb. How to wire these and if there is a specific way of wiring them.
View 6 Replies
View Related
Dec 19, 2012
i have no internet at all only local. But it is showing a full strength wireless signal, I have tried all the things i know plus what wdws recommended. Plus on the network tab it says its connected to an unknown network but in the manage wireless tab it shows my internet provider.
View 8 Replies
View Related
Mar 11, 2011
I would like to set up a TV in my spare room which does not have a coax plug. Because of the set of my house running coax cable to this room, although possible, is something I am hoping to avoid. This is because if I was to run the cable on the outside of the wall it would get in my way and it will cost $300 to $400 for a tech to come out and run it through the wall.My first thought was to set up an old computer in my living room and have it connect to a cable box. Then I would send the video signal over the wireless network. The problem is that I cannot change channels on the other end. I have been reading up on power-line networking and it looks like a good option for my problem. I was hoping to find a device that will allow me to plug coax cable into it in the living room send the signal through the power-line to another device in my spare room where my TV receiver would be located. Is there anything like this out there on the market? If not are there any other options I can look at?
View 1 Replies
View Related
Mar 29, 2012
Ad hoc network may created between two PCs either with, wifi or a RJ-45 Crossover cable?
View 7 Replies
View Related
Feb 10, 2011
How to connect laptop with a home network without using a cable??
View 1 Replies
View Related
Sep 30, 2012
To connect WAG160N to a Dell switch 5224 do I need a cross cable or a simple one? Do I need to use port 1 of WAG160N or any port ?
View 2 Replies
View Related
Oct 3, 2011
I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 11 Replies
View Related
Jan 1, 2012
our windows PC's will connect to the home (wireless) network briefly (~15 sec) and then lose the internet connection. The wireless connection seems to stay strong. During that period any browser activity will result in a DNS error message and the Win7 network signal shows strong but not connected to the internet. We tried setting static IP addresses on the PCs but no luck. A number of PC's all running Win7 exhibit this issue.After 5-10 min it reconnects and everything is normal.Network is a 20 mbs cable based system.
View 1 Replies
View Related
Nov 2, 2012
I am trying to wire cat 5 jacks into my walls and none of the jacks work. I have tried with multiple jacks and experimented with different wiring configurations but they still don't work. I know the wire I am working with is good because it had a male connector on it and I connected it to my laptop before I started wiring the jack and it worked.
View 3 Replies
View Related
Jul 3, 2011
I'm trying to connect my two computer (XP and Win 7) using a crossover cable. I set the the IP as 192.168.0.1 and 192.168.0.2.The computers can see each each other and I can access the public folder of the win7-machine on my XP-machine. However, if I try accessing the xp-machine it says:
View 2 Replies
View Related
Mar 17, 2011
as we know twisted pair cat 5 has maximum length 100 meter?
is because the voltage will decrease"weak" at the receiver "because the resistance of cable"? or because the noise will increase?
View 14 Replies
View Related
Feb 20, 2013
I want to setup port forwarding in my office router so that i can access my lan computer (192.168.0.122) from any where in the world through (remote desktop connection)I have (D-Link (DIR-615)) router. I went to virtual server option. then i select application name as Remote desktop then public port as (3389), protocol (both), Schedule (Always).My lan computer ip address (192.168.0.122), private port (same 3389), inbound filter (allow all). then i clicked save settings. Then the router took 20 seconds to save. then i close the browser.Then i asked my brother to connect through remote desktop connection who is on the skype and he is in different country and that time he is in office. So he put my router public ip address (xxx.xxx.xxx.xxx:3389) in this format but unable to connect.
View 2 Replies
View Related
Mar 19, 2011
My roommate is running dual boot Windows XP PRO (SP3) and Ubuntu 10.10. I am running Windows XP PRO(SP3). Is there any software, that can run on both OS and can create a home network that will work between XP and Ubuntu. He has Samba installed but I have read that that works on Linux not Windows so he can see me but I can't see him.
View 11 Replies
View Related
Jan 27, 2011
I just moved into a house that has pre-wired CAT5 (Maybe 6) in every room. Its all connected by two Netgear FS116 switches in the attic.
According to my landlord I should just have to plug in my modem into any ethernet port, and internet will be present at every jack.
I've plugged into several of wall jacks and none of them seem to work. Sometimes for a random reason they will work, but the connectivity is so poor that I can't even load webpages. Connecting direct to the modem I receive excellent download speeds.
I am not 100% the cabling is correct, and don't know of any way to test if they are good besides plugging in my modem, and then seeing if my computer gets connectivity.
Is there some easy way I can troubleshoot this? Am I missing something major that I need to accomplish? Like go into the switch and change settings?
View 19 Replies
View Related
Jun 4, 2011
I have Mediacom cable and internet and I was trying to hook both up in the same room.When I connect it directly from the internet cord to my modem it works fine.But when I connect it using a splitter to hook it up to my modem and tv, only the tv works.So, how would I get this to work??
View 1 Replies
View Related
Nov 15, 2011
i connected network cabel to cpu network not geting ping also done,so can i check from multimeterLaptops internet connection keeps fluctuating
View 2 Replies
View Related
Jul 20, 2011
Lately I've been experiencing connection problems between my router and cable modem. Every night after 11:00 PM EST, my Internet connection sporadically goes out. I called my ISP who said there was nothing wrong on their end. Plugging directly into my modem allows me to access the Internet. When I wake up in the morning, the connection is back until 11 or later again. I ran WireShark but I'm not sure what to be looking for. There are a lot of random things from the LLMNR protocol like standard query A zmtvrjaql.
View 2 Replies
View Related
Dec 10, 2011
I have a Dlink DIR-655 router for my wired and wireless router for my home network. I have a 100ft cat6 ethernet cable. I pulled it from the router to my home server in my basement.
Does the 100ft cable make a difference or does the fact that it's a cat6 cable make a difference?
When moving similar files at work, it's faster. So I'm trying to find out what's the bottleneck at home. What speeds should I expect for a home network?
View 5 Replies
View Related
Mar 1, 2012
I got WAG200G and two computers, one connected by ethernet cable and laptop connected by wifi.How to configure router to get full speed of my internet connection on the desktop PC?Let's say i need 80% of my internet speed to download something on desktop, but in the same moment laptop also downloading something, how to setup router to get more downloading speed on the desktop.
View 1 Replies
View Related
Jan 17, 2012
I used to have a WRT54G Router at home. I would regularly use Cisco Systems VPN Client to connect to my work router and the RDP to my work PC. (The router at work is Cisco 2811.)A couple months ago, I finally upgraded my home router to a Linksys E1000. Since that time, I have NOT been able to:1) Connect from my work PC to my home PC using Windows RDP2) Connect from home PC to VPN at work via Cisco VPN ClientIt's like the Linksys router at home an Cisco router at work refuse to speak to each other.A week ago, I finally gave up and bought a Linksys E3000. Exact same connect problems as the E3000.To test, I plugged my old WRT54G back in just to see, and lo and behold, all my connection problems go away. Plus the E3000 in again, and I cannot connect b/w home and work.A few other notes:From work, I have successfully used RDP to reach out to other test PCs (friends computers), but I can't get to my home network with the E3000 working. I also can connect to home via RDP using other internet connections, like if I'm in a hotel or airport.It's just that my Linksys E3000 at home and the Cisco 2811 at work refuse to acknowledge each other.
View 6 Replies
View Related
May 24, 2011
Setting up a netgear n600 (WNDR3700) in my home. I have tried connecting two PCs to the LAN and am only getting 100mb/s with most of my patch cables(all are cat5e). I was only able to achieve 1Gb/s with 1 of my cables(which is actually a few feet to short for my shortest run). Both PCs have gigabit capability. What are the chances that 5 out of 6 cat5e cables are bad? Am I missing something?
View 2 Replies
View Related
Feb 18, 2013
i have an ARRIS TM822 cable modem provided by comcast, in addition i have a linksys e3000 wireless router. what i am trying to accomplish is to bridge the cable modem over to the router. i messaged comcast about this issue and i have attempted what they told me to do, but im not getting any where.
View 1 Replies
View Related
Apr 27, 2012
I just picked up a 24 port Catalyst 2950 to expand my home network and learn a bit more about networking. Having just upgraded the IOS software 'm now trying to get this to work as required on my network but I'm having a few issues.
My intentions are to plug my cable router/modem wan connection which is set up as the dhcp server to fa 0/1, then use fa 0/2 - 24 for the rest of my wired network. So essentially all on the same subnet interfacing with the router 192.168.0.1.
So far I have set up all of the security on the switch, and have all switch ports assigned to vlan1 with no IPs. My laptop connected to fa0/2 however is not assigned an ip address. Looking at a few posts I ahve rightly or wrongly played about with dhcp snooping.
Config
Current configuration : 2205 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
service (code)
View 3 Replies
View Related
Mar 22, 2013
I was using Remote Desktop between two home computers hard wired through the router and a switch. Now after upgrading to firmware 1.35 I can't get remote desktop to connect. I get an error that I may not have permission, etc. I have the DIR 655 ver A and am running Windows 7 professional on both computers.
View 5 Replies
View Related
Sep 7, 2011
Daughter is at college with brand new Vostro 3450. Was working on school network during summer but drops the connection multiple times during the day. She runs the Troubleshooting which then allows her to connect and 30 minutes later the connection is dropped again. The laptop works fine when connected to the internet via the ethernet cable. Here is what has been done by the IT support at the school.
1 - Deleted the Intel wireless utility as they thought it was "fighting" with the Windows software for control over the wireless.
2 - Increased the power for the wireless card to "high performance".
3 - Reinstalled Windows 7 to eliminate that there is a software issue.
4 - Replaced the Intel Wireless Card with new part sent by Dell.
Now the IT supports recommendation is to "get a new system" and that perhaps the Vostro's wireless card is "not compatible with their network". For Dell computers they sell the Latitude to the students.
My daugther likes the Vostro. She doesn't want to give it up. Wants the system to work. She had the laptop during the summer session and had problems with connection. The Windows software was reinstalled thinking there was a virus (although no evidence of one) and then she had no connection problems for the whole summer. She came home for 2 weeks and returned back to school and then the system would not work again.
I don't know what to do. Can I buy a USB wireless adapter for her to temporarily use until I can figure out how to fix this problem. Personally, I think there is a design flaw with the vostro.
View 3 Replies
View Related
Feb 8, 2012
i have an internet connection thrw USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible
View 2 Replies
View Related
