Netgear FS116 - Rewired Home Network Not Working
Jan 27, 2011
I just moved into a house that has pre-wired CAT5 (Maybe 6) in every room. Its all connected by two Netgear FS116 switches in the attic.
According to my landlord I should just have to plug in my modem into any ethernet port, and internet will be present at every jack.
I've plugged into several of wall jacks and none of them seem to work. Sometimes for a random reason they will work, but the connectivity is so poor that I can't even load webpages. Connecting direct to the modem I receive excellent download speeds.
I am not 100% the cabling is correct, and don't know of any way to test if they are good besides plugging in my modem, and then seeing if my computer gets connectivity.
Is there some easy way I can troubleshoot this? Am I missing something major that I need to accomplish? Like go into the switch and change settings?
View 19 Replies
ADVERTISEMENT
Jun 21, 2011
I am using the WNR200v2 for wireless and with a powerline adapter where should I set my speeds, 54Mbps, 145Mpbs or 300Mbps? Are there any other settings I should changeI have a road runner cable modem with 10Mbps download. I am streaming wireless to a PS3 slim 160gb, WDTV LIVE HD media streamer and a Directv HR24-500 DVR. I am using a powerline adapter kit to stream to a Boxee Box another media streamer. Most of my streaming is from the internet but, I occasionally will download something and then stream it from my HDD to one of my media streamers. My wireless signal only needs to travel about 30 ft. and the same for the powerline adapter
View 4 Replies
View Related
Mar 15, 2011
We are getting browser redirects on our Netgear home network. It's happening on 3 computers (2 LAN, 1 wireless) and on a cell phone. Have scanned the computers with AVG, Malwarebytes and Super Antispyware.I have to believe it's in the router
View 1 Replies
View Related
Jan 11, 2012
I've been replacing my Netgear WNDR3700 (currently only serving as wired router and gigabit switch) with an Untangle box.Obviously, only the free "Lite" version would be worth it, as the others are priced ridiculously for non business use. I've had a hard time figuring out from their webpage how the features of the "Lite" compare to the others, particularly how Spam Blocker Lite, Web Filter Lite and Virus Blocker Lite compare to the full versions of each.
Is the untangle router any good? How do its management features compare with consumer solutions?The new web caching feature seems really cool too, especially when multiple systems grab the same large updates or download the same steam games, but at $54/year it seems a bit excessively priced for home use, so I'd probably just be sticking with the base free version.
View 19 Replies
View Related
Jan 16, 2011
Looking for the most efficient setup of my home network. I recently bought the netgear 3700 and it has been great. I also have a trendnet green 8 port giga switch. Both of these will be located in my equipment closet.
I also have an ooma voip hub. before i did the router upgrade i had modem>ooma hub>router. Mainly had it that way since the previous router was a wrg614 and i thought the hub probably had better qos routing. I now have the 3700 infront since i think it does that. I need to learn how to setup the qos though. Problem is that having the hub after the router loses one of my 11 ports (i have pleanty now).
Will speed through the switch be as fast as straight from the router? should my netflix devices connect directly to the router or does any of this matter. [code]
View 7 Replies
View Related
Apr 8, 2012
We operate a home office network (workgroup) of 6 older PCs running Windows XP SP3.It's a Windows based network using a designated "home" PC as a server, and until recently we were using ethernet cables and a hub/switch for sharing files which worked well because we only share small document files, no music or video.The workgroup does not have a shared internet connection, we don't want or need one for what we do, although the individual PC's can connect to the web using USB dongles just for checking e-mail.Recently the ethernet hub died and I decided to take the opportunity to upgrade to wireless file sharing.None of the PCs have inbuilt wireless adapters so I bought a D-Link USB wireless adapter for each PC.I also bought a Netgear N300 router, thinking that this was suitable entry level equipment for wireless file sharing. Now I'm not so sure.So far I was unable to install the router on the "home" PC because the installation CD seems to assume that the router will be used for sharing an internet connection and does not seem to offer an installation option without a standalone modem. How to install this type of router to create a closed home wireless network without a shared internet connection.
View 14 Replies
View Related
Feb 2, 2013
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies
View Related
May 12, 2012
I want to connect a Netgear FS605 directly to my ADSL router.However I find that this does not work unless I put my Netgear EN2005 Hub in between the Switch and the Router.The Hub is 10Mb/sec the switch 100Mb/s so I would like to eliminate the hub.
View 3 Replies
View Related
Feb 14, 2013
when I try to connect a laptop to the wi fi it won't connect because the connection has changed from home network to public and sometimes unidentified network . I can get it connected by momentarily unplugging the router and rebooting it , then pressing connect button and it will revert to home network and things are ok . It is a netgear DGN1000 and I tried another router same make and model, same problem. I use an ethernet cable on my desktop no problems.there's 3 laptops come in to occasional use and it's happened to them all . My early attempt was microsoft's fix for sticking in public mode . It is windows 7 pro on the laptops , ultimate on desktop?
View 4 Replies
View Related
Dec 19, 2012
i have no internet at all only local. But it is showing a full strength wireless signal, I have tried all the things i know plus what wdws recommended. Plus on the network tab it says its connected to an unknown network but in the manage wireless tab it shows my internet provider.
View 8 Replies
View Related
Jun 2, 2011
Currently using a netgear WG602 wireless router which i use to connect to my 2nd PC and Iphone, with the Netgear router running from my main PC.I have recently been having trouble with my 2nd PC ad Iphone randomly losing connection and the only way for the connection to be reastablished is to reboot the wireless router. Once rebooted i am able to connect again to the internet with no problems, interestingly enough my main PC never loses connection. Also sometimes when i lose my connection and reboot the wireless router i will have a IP conflict pop up on my 2nd PC however i would i say i get this once in every 10 dissconects and not all the time. Sometimes i won't dissconect at all in a day but sometimes i may dissconect 5-6 times.
View 1 Replies
View Related
Feb 15, 2012
I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies
View Related
Apr 13, 2013
I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.
Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )
View 2 Replies
View Related
Jan 14, 2012
I have purchased a couple network usb adapters (Netgear N-300 and Linksys AE2500) and both work fine surfing the internet but when I try to play World of Warcraft the wifi loses connection to the router and I lose all internet capabilities on my computer. My friends computer is still able to use the internet though.
View 1 Replies
View Related
Jan 1, 2012
our windows PC's will connect to the home (wireless) network briefly (~15 sec) and then lose the internet connection. The wireless connection seems to stay strong. During that period any browser activity will result in a DNS error message and the Win7 network signal shows strong but not connected to the internet. We tried setting static IP addresses on the PCs but no luck. A number of PC's all running Win7 exhibit this issue.After 5-10 min it reconnects and everything is normal.Network is a 20 mbs cable based system.
View 1 Replies
View Related
Nov 2, 2012
I am trying to wire cat 5 jacks into my walls and none of the jacks work. I have tried with multiple jacks and experimented with different wiring configurations but they still don't work. I know the wire I am working with is good because it had a male connector on it and I connected it to my laptop before I started wiring the jack and it worked.
View 3 Replies
View Related
Dec 11, 2012
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies
View Related
Nov 19, 2011
so I have this problem, the internet only work on one computer, whenever I connect to another computer it says something like: " Can't connect to IP 2, 3, 4 etc. I've tried resetting the modem, router and everything, it didn't work... Sooo, if I connect the same internet cable that's working on the computer to another one it doesen't work. What sholuld I do??, maybe change some settings in the router?
View 3 Replies
View Related
Feb 20, 2013
I want to setup port forwarding in my office router so that i can access my lan computer (192.168.0.122) from any where in the world through (remote desktop connection)I have (D-Link (DIR-615)) router. I went to virtual server option. then i select application name as Remote desktop then public port as (3389), protocol (both), Schedule (Always).My lan computer ip address (192.168.0.122), private port (same 3389), inbound filter (allow all). then i clicked save settings. Then the router took 20 seconds to save. then i close the browser.Then i asked my brother to connect through remote desktop connection who is on the skype and he is in different country and that time he is in office. So he put my router public ip address (xxx.xxx.xxx.xxx:3389) in this format but unable to connect.
View 2 Replies
View Related
Feb 10, 2013
My computer runs bit torrent almost all the time, sometimes when I start Firefox the home page google never loads and neither do any other web pages yet bit torrent is still working as if nothing has changed. If I start a download in Firefox come back to the pc a few hours later Google doesn't load but the Firefox download still continues.What causes this is it DNS ?
View 2 Replies
View Related
Mar 19, 2011
My roommate is running dual boot Windows XP PRO (SP3) and Ubuntu 10.10. I am running Windows XP PRO(SP3). Is there any software, that can run on both OS and can create a home network that will work between XP and Ubuntu. He has Samba installed but I have read that that works on Linux not Windows so he can see me but I can't see him.
View 11 Replies
View Related
Aug 10, 2011
I have a modem which is allowing me to go online at home. Unfortunately, the cable that goes with this modem is too short (just 2m).This week, I bought a cable (internet cable) of 24m and I expected to be able to move around while being connected and surf the internet but internet does not work when I am using the new cable. We have tested the cable (using a cable tester) and the cable seems to work fine. When I use back the old cable (which is very short) internet is working perfect.
View 15 Replies
View Related
Nov 15, 2011
I just bought and received a Cat6 200ft Ethernet cable from Amazon, linkIt is going from a router to my PC and is not working. My old Ethernet cable works just fine from said router to PC. I do not know why this one is not working. I tested the cable out on my laptop and it works fine for that. I am not sure what info to post about my PC, but I am using an Asrock z68 Extreme3 Gen3 motherboard as my lan connector.
View 10 Replies
View Related
Jan 17, 2012
I used to have a WRT54G Router at home. I would regularly use Cisco Systems VPN Client to connect to my work router and the RDP to my work PC. (The router at work is Cisco 2811.)A couple months ago, I finally upgraded my home router to a Linksys E1000. Since that time, I have NOT been able to:1) Connect from my work PC to my home PC using Windows RDP2) Connect from home PC to VPN at work via Cisco VPN ClientIt's like the Linksys router at home an Cisco router at work refuse to speak to each other.A week ago, I finally gave up and bought a Linksys E3000. Exact same connect problems as the E3000.To test, I plugged my old WRT54G back in just to see, and lo and behold, all my connection problems go away. Plus the E3000 in again, and I cannot connect b/w home and work.A few other notes:From work, I have successfully used RDP to reach out to other test PCs (friends computers), but I can't get to my home network with the E3000 working. I also can connect to home via RDP using other internet connections, like if I'm in a hotel or airport.It's just that my Linksys E3000 at home and the Cisco 2811 at work refuse to acknowledge each other.
View 6 Replies
View Related
May 24, 2011
Setting up a netgear n600 (WNDR3700) in my home. I have tried connecting two PCs to the LAN and am only getting 100mb/s with most of my patch cables(all are cat5e). I was only able to achieve 1Gb/s with 1 of my cables(which is actually a few feet to short for my shortest run). Both PCs have gigabit capability. What are the chances that 5 out of 6 cat5e cables are bad? Am I missing something?
View 2 Replies
View Related
Mar 22, 2013
I was using Remote Desktop between two home computers hard wired through the router and a switch. Now after upgrading to firmware 1.35 I can't get remote desktop to connect. I get an error that I may not have permission, etc. I have the DIR 655 ver A and am running Windows 7 professional on both computers.
View 5 Replies
View Related
Feb 24, 2013
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
View 5 Replies
View Related
May 9, 2011
I have a Netgear DGN2200 and a BT Home Hub V1 and wish to use my Netgear as the WBS and the Home Hub as a repeater. I have set both up, and the Home Hub finds the Netgear and recognises it as a WBS (I think) but cannot get internet through my Homehub at all.
View 1 Replies
View Related
Oct 20, 2011
Here's the layout: Cable modem in the basement. Several devices in which I'd prefer a wired connection in the basement. Upstairs on the 1st and 2nd floor of the house are many devices in which wifi is fine or preferred.Here's the problem: As you might guess, wifi is weak upstairs and certainly on the patio and 2nd floor. I have an access point upstairs that I've experimented with but it is flaky.
View 1 Replies
View Related
Nov 10, 2011
How to install a wireless network in home environment?
View 6 Replies
View Related
Jan 14, 2012
I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.
View 1 Replies
View Related
Sep 10, 2011
I have a D-Link DGL-4500 router and my landlord recently ungraded our internet connection. However, now I get this error message when I try to hook it up to the ethernet hub,"The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."
View 3 Replies
View Related
Mar 19, 2011
I want to wire the house for Cat6, the current home we live in I had ATT Uverse installed (but I hated it and now with the bandwidth caps I would pass regardless) and they installed Cat5e. I love having a hardwired internet connection in each room so the new place needs to have this done.
-Professional Networking Tool Kit (I was going to buy the stripper/crimper/punch tool but I thought the testing tool would be nice to have)
-1000ft Bulk Solid Cat6 cable 24AWG
-Cat6 Punch down Keystone Jack
Then just zip ties for cable management, cat6 solid plugs + inserts, two hole wall plates and black relief boots. I already have a Netgear GS108 that I'll be bringing with me, if that ends up not being big enough I will just buy a bigger one in the future. I'm planning on running two cables to each room of the house for a total of 12 cables (not all of them will be hooked up, I plan to make sure to label each one at the central location where I'll be keeping the cable modem and switch. Each bedroom will only currently use one port with the spare bedroom not using any but when I'm running cables I'm going to run them all for future proofing our new home. I was thinking of putting the wireless router I have in the living room as if any place will need more than two ports it will be the living room (Receivers, TVs, Bluray players, DirecTV boxes will all end up using RJ45 as I upgrade them).
View 12 Replies
View Related
