Home Network :: Netgear WNR2000v2 Settings?
Jun 21, 2011
I am using the WNR200v2 for wireless and with a powerline adapter where should I set my speeds, 54Mbps, 145Mpbs or 300Mbps? Are there any other settings I should changeI have a road runner cable modem with 10Mbps download. I am streaming wireless to a PS3 slim 160gb, WDTV LIVE HD media streamer and a Directv HR24-500 DVR. I am using a powerline adapter kit to stream to a Boxee Box another media streamer. Most of my streaming is from the internet but, I occasionally will download something and then stream it from my HDD to one of my media streamers. My wireless signal only needs to travel about 30 ft. and the same for the powerline adapter
View 4 Replies
ADVERTISEMENT
Aug 13, 2011
Two desktop computers with windows 7 home premium.Router: Netgear WNR2000v2 (which is NOT IPv6 compliant).External HD: 2TB Fantom.I have the external HD connected to one of the desktops via USB. I'd like to use it to back up the second computer to this HD.How do I get the second computer to recognize this as a backup target?Incidentally I've had problems getting HomeGroup setup since IPv6 is required for HomeGroup. I assume the problems are because the router isn't IPv6 compliant. I've tried the Microsoft Fixit 50410 (Use IPv4 instead of IPv6 in prefix policies. I've also reverted using Microsoft Fixit 50440 (Enable IPv6).
View 15 Replies
View Related
Sep 19, 2012
I just got a foscam camera. I am trying to be able to connect to it from my phone while I am not home. I am having one hell of a time trying to connect to my router, I haven't been able to yet. I am using port forwarding, have followed all kinds of instructions I found on the web, and none work. I cannot get port 80 to open. I have a net gear wnr2000v2.
View 1 Replies
View Related
Mar 6, 2011
Ever since I upgraded to the netgear WNR2000v2 router, I can receive email but not send it.
View 2 Replies
View Related
Jul 4, 2012
how do I enable UPnP on netgear WNR2000v2 router???
View 1 Replies
View Related
Mar 11, 2013
Router: Netgear WNR2000v2
For a long time now, my router has been running fine with my devices. Now all of the sudden, some devices(my xbox, 3ds, and phone) cannot connect to the internet despite them picking up the signal. The weird thing is, the computers in my house and my PS3 can connect. I also don't think it's my security settings(TKIP and AES hybrid) since they all functioned fine with that before this problem.
I tried unsecuring my network as a test, but it seems that only my phone can connect while my 3ds cannot. I haven't tested this with the 360 however. I also tried resetting my router to factory defaults three times.
View 8 Replies
View Related
Jul 5, 2011
Every 25 minutes, sometimes sooner, sometimes later but usually on the dot I get limited access and the router interface becomes inaccessible for about 1-3 minutes. My problem is my room mate has left for the week and the router is locked in there. I am unable to connect hardwired or power cycle the router. I have the password for the connect and I just got the PW for the router interface. I also have remote capabilities. I have been trying many things to stop it from being so slow and unstable but basically even though my signal reception is 4-5 bars I am only averaging 11mbps speed. I am using a b/g alfa 1w adapter but this shouldn't be the cause of the slower speeds. I can only achieve 1-3mbps down on speedtest.net whereas before I was getting 6-12mbps down.
-UPnP Off.
-NAT Firewall Open.
-300mbps Max
-Channel 1 no other channels within 5 channels near it.
-WPA2-PSK [AES]
-Default MAC Address
-Automatic Configuring of all IP Addresses
-MTU 1500
-WMM On.
Being limited by lack of power cycle and hardwired connect makes it a little harder. I know it's fixable without that though. Also there is no point of a hardwired connect unless I am upgrading the firmware (it already has the newest firmware by default) because I know it should work fine like that. I have tested connecting to other networks and I do not d/c on them. My own research has shown that setting a static IP resolves the issue. I am unfamiliar with exactly how to set this up for the router and the client and if it involves dealing with the ISP (Comcast)
View 9 Replies
View Related
May 18, 2011
I am unable to access a certain website when I go through my router. I have by passed the router to see if that was the issue and I can access the website with just my modem hooked up.
View 2 Replies
View Related
Aug 4, 2011
I am having trouble getting the wrt610n to connect to the wnr2000v2 that can be set a wireless repeater. I had a 160n hooked up and it was working fine, but am unable to get the 610n going on it. setting this type of networking up , but have a general idea of how it works. I have the 610n running and is broadcasting a signal, but the wnr 2000 will not connect to it wirelssly and repeat it. The setup in the netgear is pretty basic , but I am new to the linksys 610n and the interface that's why I believe it has to do with the 610n.
View 3 Replies
View Related
Jan 6, 2012
How do I setup Netgear WNR2000v2 wireless router as a wireless access point? I just upgraded to a Netgear WNDR3700 wireless router and I don't wanted the wnr2000 to go waste. So basically as the followings:
Internet(modem)---Ethernet cable--->3700---wireless-->2000---Ethernet cable-->Xbox360/PS3.
View 8 Replies
View Related
Aug 22, 2011
I have a computer in my garage that is connected to my Linksys router in the house via Cat 6 Cable. The computer in the garage has dual NIC cards installed and working fine. I am trying to get the Camera to feed back to the router from the second NIC card in the garage computer.The first NIC is communicating fine with the router.
Linksys Settings:
192.168.1.1
255.255.255.0
NIC 1:
192.168.1.145 (static)
255.255.255.0
192.168.1.1
[code]....
After messing around with many different thoughts and tries, I have successfully contacted 192.168.1.120 (the camera) from garage Computer While camera is connected to NIC 2.Camera wants a crossover cable to function properly and won't accept patch cable, I have tried with new cables...no change it needs crossover cable when connected straight to the NICs.
Camera:
192.168.1.120
255.255.255.0
192.168.1.1
Now the problem is I cannot view or access the Camera from my main Computer inside the house Like I need to....
View 2 Replies
View Related
Jun 8, 2011
It's about a Linksys WRT54G with Firmware: DD-WRT v23 SP2 (09/15/06) std it started resetting it's admin panel settings once every few months, lately it does that every few days, like name of LAN network, name encryption and password of the wireless AP, IP filter setting and so on
View 5 Replies
View Related
Mar 15, 2011
We are getting browser redirects on our Netgear home network. It's happening on 3 computers (2 LAN, 1 wireless) and on a cell phone. Have scanned the computers with AVG, Malwarebytes and Super Antispyware.I have to believe it's in the router
View 1 Replies
View Related
Jan 11, 2012
I've been replacing my Netgear WNDR3700 (currently only serving as wired router and gigabit switch) with an Untangle box.Obviously, only the free "Lite" version would be worth it, as the others are priced ridiculously for non business use. I've had a hard time figuring out from their webpage how the features of the "Lite" compare to the others, particularly how Spam Blocker Lite, Web Filter Lite and Virus Blocker Lite compare to the full versions of each.
Is the untangle router any good? How do its management features compare with consumer solutions?The new web caching feature seems really cool too, especially when multiple systems grab the same large updates or download the same steam games, but at $54/year it seems a bit excessively priced for home use, so I'd probably just be sticking with the base free version.
View 19 Replies
View Related
Jan 27, 2011
I just moved into a house that has pre-wired CAT5 (Maybe 6) in every room. Its all connected by two Netgear FS116 switches in the attic.
According to my landlord I should just have to plug in my modem into any ethernet port, and internet will be present at every jack.
I've plugged into several of wall jacks and none of them seem to work. Sometimes for a random reason they will work, but the connectivity is so poor that I can't even load webpages. Connecting direct to the modem I receive excellent download speeds.
I am not 100% the cabling is correct, and don't know of any way to test if they are good besides plugging in my modem, and then seeing if my computer gets connectivity.
Is there some easy way I can troubleshoot this? Am I missing something major that I need to accomplish? Like go into the switch and change settings?
View 19 Replies
View Related
Jan 16, 2011
Looking for the most efficient setup of my home network. I recently bought the netgear 3700 and it has been great. I also have a trendnet green 8 port giga switch. Both of these will be located in my equipment closet.
I also have an ooma voip hub. before i did the router upgrade i had modem>ooma hub>router. Mainly had it that way since the previous router was a wrg614 and i thought the hub probably had better qos routing. I now have the 3700 infront since i think it does that. I need to learn how to setup the qos though. Problem is that having the hub after the router loses one of my 11 ports (i have pleanty now).
Will speed through the switch be as fast as straight from the router? should my netflix devices connect directly to the router or does any of this matter. [code]
View 7 Replies
View Related
Apr 8, 2012
We operate a home office network (workgroup) of 6 older PCs running Windows XP SP3.It's a Windows based network using a designated "home" PC as a server, and until recently we were using ethernet cables and a hub/switch for sharing files which worked well because we only share small document files, no music or video.The workgroup does not have a shared internet connection, we don't want or need one for what we do, although the individual PC's can connect to the web using USB dongles just for checking e-mail.Recently the ethernet hub died and I decided to take the opportunity to upgrade to wireless file sharing.None of the PCs have inbuilt wireless adapters so I bought a D-Link USB wireless adapter for each PC.I also bought a Netgear N300 router, thinking that this was suitable entry level equipment for wireless file sharing. Now I'm not so sure.So far I was unable to install the router on the "home" PC because the installation CD seems to assume that the router will be used for sharing an internet connection and does not seem to offer an installation option without a standalone modem. How to install this type of router to create a closed home wireless network without a shared internet connection.
View 14 Replies
View Related
Feb 2, 2013
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies
View Related
May 12, 2012
I want to connect a Netgear FS605 directly to my ADSL router.However I find that this does not work unless I put my Netgear EN2005 Hub in between the Switch and the Router.The Hub is 10Mb/sec the switch 100Mb/s so I would like to eliminate the hub.
View 3 Replies
View Related
Feb 14, 2013
when I try to connect a laptop to the wi fi it won't connect because the connection has changed from home network to public and sometimes unidentified network . I can get it connected by momentarily unplugging the router and rebooting it , then pressing connect button and it will revert to home network and things are ok . It is a netgear DGN1000 and I tried another router same make and model, same problem. I use an ethernet cable on my desktop no problems.there's 3 laptops come in to occasional use and it's happened to them all . My early attempt was microsoft's fix for sticking in public mode . It is windows 7 pro on the laptops , ultimate on desktop?
View 4 Replies
View Related
Jun 2, 2011
Currently using a netgear WG602 wireless router which i use to connect to my 2nd PC and Iphone, with the Netgear router running from my main PC.I have recently been having trouble with my 2nd PC ad Iphone randomly losing connection and the only way for the connection to be reastablished is to reboot the wireless router. Once rebooted i am able to connect again to the internet with no problems, interestingly enough my main PC never loses connection. Also sometimes when i lose my connection and reboot the wireless router i will have a IP conflict pop up on my 2nd PC however i would i say i get this once in every 10 dissconects and not all the time. Sometimes i won't dissconect at all in a day but sometimes i may dissconect 5-6 times.
View 1 Replies
View Related
Feb 15, 2012
I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies
View Related
Apr 13, 2013
I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.
Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )
View 2 Replies
View Related
Dec 11, 2012
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies
View Related
May 16, 2012
I got a new modem from Optus Australia and they sent me this modem netgear ofcourse , and I wanna know what's the best settings for it cause I'm dropping signal from my ps3 (im using wi-fi) and lagging online,
View 9 Replies
View Related
Nov 17, 2012
I have rebooted my netgear router to the factory settings and now the internet wont work , i have no idea how to get it to work again. On the box all the right lights are green exept the internet light which is red.
View 1 Replies
View Related
Aug 21, 2011
My 7 month old Netgear wireless router suddenly stopped working
The router's power light will not remain on after powering it up. The only lights that remain on after power-up are the (4) "LAN Port" lights (solid green) and the "Internet" light (solid amber).
The owner's manual states that it's a hardware problem if the power light does not remain on and to call tech support. The tech I spoke too said it's a settings issue that they deal with everyday and not a hardware problem.
One of the things I've tried was using a paper clip to reset the router to it's factory settings. It didn't change anything though. Re-running the setup CD didn't yield any results either. It just stopped in the middle because it said there was no ethernet cable connecting the laptop to the router, even though there was.
By the way... My ISP is Century Link and I use an Actiontec DSL Modem.
Not sure how to modify the router's settings if the network is down.
View 3 Replies
View Related
Jun 1, 2011
How do I personalize the settings on my router from default. Netgear wnr2000.
View 2 Replies
View Related
Jan 1, 2012
need passwords for netgear 1 wifi . free
View 2 Replies
View Related
Dec 13, 2011
Have just had a stab at using my Netgear DGND3700's USB drive sharing - I had a spare external HDD + I want to be able to access files on it both over the 'net and from local network. Both work fine, very easy to set up, however I am unable to edit settings for the shared folder, which means I am unable to password protect it.
I don't need a password for local sharing but obviously it isn't ideal to have files freely available on the Internet, have looked into troubleshooting but can't find any similar stories with Netgears.I click "edit" or "create network folder" and it loads for a second or two but just stays on the same page. There is only one option to select but I have tried clicking the radio button first anyway, then clicking edit, same result.
View 1 Replies
View Related
Feb 25, 2012
How do I get forgotten password For netgear router free without upsetting existing settings ?
View 1 Replies
View Related
Jan 14, 2012
Using win7 64 bit 1 pc upstairs and laptop down stairs,no need for file or printer sharing so its disabled. Is it right that the public location setting is the safest setting with the sharing option disabled,and that wpa etc is not used, If you know you won’t need to share files or printers, the safest choice is public network.
View 6 Replies
View Related
Feb 24, 2013
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
View 5 Replies
View Related
