How To Get Internet Access
Nov 29, 2011I need to be able to get Internet Access to me test network without disturbing the Home Production network (e.g. removing DHCP etc from Home Network Router).
View 2 RepliesI need to be able to get Internet Access to me test network without disturbing the Home Production network (e.g. removing DHCP etc from Home Network Router).
View 2 Repliesi would like to know that how to stop internet access through network complete internet access
View 2 Replies View RelatedI have two SSIDs on an Autonomous Access Point, that goes to a 2960 switch, that connects to a L3 3560. I have a vlan for admin/private internal access that uses the native vlan (1) and guest vlan (50). I have configured both and I am trying to get both to go out the same Internet connection.
I cannot get the guest access to access the Internet. It looks like my computer will go, but it just comes up saying no Internet access.All interfaces are trunking this vlan properly. I can communicate from the laptop to the 3560 but I just can't get to the Internet.
I am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.
View 6 Replies View RelatedI'm having some difficulties with the VLAN setup on the SG-200 and the WiFi access point. The access point (a TP-Link WA801N) is only able to access the internet when it is plugged into a port that is on the default VLAN (PVID 1). If I plug it into one of the other VLANs then any clients connected to the WiFi lose access to the internet and cannot access devices on the VLAN. I have previously used this setup with a first generation Cisco WAP4410N. [code]
View 4 Replies View RelatedI have 2 ISPs terminating on 2 FE ports on my 2811 router.ISP1 had always been here, used for the following:Internet access to LAN usersInternet access with public IP mapping to servers in different security zones (VLANS)Site to Site VPN tunnels to 3rd party partnersRemote VPN access to 3rd party partners We recently got a second ISP, mainly for the following:Internet access and public IP mapping to servers on seperate security zones (VLANS)Site to Site VPN tunnels to 3rd party partners as above, but different hosts So far, ISP1 and all the above service have worked based on the config below. However, having added ISP2, I have not been able to successfully create the site-to-site VPN tunnels.
version 12.4
!
ip source-route
!
ip cef
!
ip name-server 4.2.2.2
ip name-server 137.65.1.1
ip inspect WAAS enable
[code]....
Whenver I try to establish a tunnel on SDM_CMAP_2 and run a test using CCP, I get 2 failure reasons:
1. The peer must be routed through the crypto map interface. The following peer(s) are routed through non-crypto map interface - 4.58.130.130
2. The tunnel traffic destination must be routed through the crypto map interface. The following destinations are routed through non-crypto map interface - 4.58.130.134
The tunnels on SDM_CMAP_1 are all active Do I need to include a default route for the second ISP on the router? If so, how do I get this done? When I tried it, I had loops on the user LAN segment of the network.
I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies View RelatedAbruptly internet access disappeared. It's a router issue, none of the computers here can connect. Further, I can't access the router through a browser - 192.168.0.1 results in a "Firefox cannot connect" message. I've tried resetting the DNS to no avail. I'm typing via cell phone and it's annoying, but I'm willing to try about anything.
View 4 Replies View RelatedHere is my setup:
Netgear WNDR3700 - Main router, DHCP turned on
4x Netgear WNR2000 - Setup as Access Points (DHCP turned off), connected to main router via LAN ports
I only want the guest network to have internet access. I have the guest network enabled on the router and access points with the option to "Allow Guest network to access main network" disabled. My problem is that since the access points aren't hooked directly to my modem via the WAN port, the guest network broadcasted from the access points does not have internet access.I have read up on setting up a separate subnet for the guest network using DD-WRT but was curious if there was a way to get the desired result with the stock Netgear firmware.
How do i access an MS Access backend with a front end without using SQL or share point
View 3 Replies View RelatedI have a modem connected to a router wirelessly and an access point few computers have access to the internet and some has limited access even those close to the access point.
View 2 Replies View RelatedI have a laptop that I take to work, and would like to set things up to use my home internet connection from elsewhere. I don't have another computer to function as a server for me at home, so would like to do it so that my router alone provides this access (log into it from the internet anywhere and use my internet as if I am using it from home). How would I go about doing this? Would it require installing new firmware?
View 1 Replies View RelatedI have a Sony Vaio running Windows 7 Home Premium. Yesterday I accessed the Internet at the office over a Cat5 cable. Last night I accessed the Internet at home via my USB Internet dongle (actually an O2 mobile phone). Today neither works. I have also tried to connect to the Internet via Wireless and that does not work either.Needless to say my desktop (using the same Cat5 cable) works. My mobile phone can access the Internet on it own. And others can get the wireless to work.My Vaio can connect to all three; however, all three say "No Internet access".I changed nothing between last night and this morning. I have scanned through the list of Windows Updates and nothing has been downloaded in the past week. I have turned off my firewalls (in both McAfee and Symantec Endpoint Protection). I have run the three NETSH reset commands with Administrator privileges. I have rebooted my machine numerous times. Nothing works.
View 4 Replies View RelatedI am connected to my network wirelessly and I have Internet acces (according to the symbol at the bottom right) bu the Internet doesn't work. At the moment it keeps fluctuating between giving me interne and not I am using Skype to tell me if I have Internet ( when it's green I do when it's grey I don't) I have tried many things on forums like obtaining ip automatically or obtaining a fixed ip. I've tried renewing the ip and all this doesnt work.
View 4 Replies View Relatedwell a couple days of go it was working fine until i updated windows 7 now it says im connected to the internet but when i go on it dosnt load anything, and when i go check it says that "IPv6 connectivity: No Internet access" how ever the IPv4 is connected to the internet, should i restore settings to osmetimes earlier this week
View 2 Replies View Relatedwireless internet connection connected no bit it says no internet access what is the problem
View 1 Replies View RelatedMy computer it connected to the internet wirelessly but i cant broswe the web or play video games online. I am an avid world of warcraft player but it tells me i cannot connect to the launcher. The laptops that connect to the same internet work just fine though. I have tried to connect through an ethernet cord with no luck.
View 19 Replies View Relatedone computer I can add the internet but other computers can not. I've tried different methods, but it can not.I think that one computer is connected to the internet and one cable does not allow to add other computers. I am the gate with ip address, which would be 111.111.111.111 to join a single computer, while the other does not pass its IP address, but running with different ip address like 111.111.111.112I don't know how to connect 2 computers with one ip.
View 8 Replies View RelatedI have a computer on my network that can't connect to the internet even though it has a valid IP address and can access / be accessed by other machines on the network (I use it as my file server and also remote in using TeamViewer LAN mode).The router wouldn't seem to be a problem because the other machines on the network that are connected to the same router in the same way access the internet fine. The only difference is that they are Win 7 HP and this one is Win XP Pro. I know there could be some funky setting on the router, but it would have to be placed there intentionally and I have never done anything with those settings.I ran a full virus scan today (using manually downloaded definition updates) and also tried removing and reinstalling the ethernet connection, turning off the firewall, repairing the ethernet connection, and rerunning the network setup wizard (including a number of restarts).
View 16 Replies View Relatedwhen I setup the router and name it (myrouter) I get a red X and it doesn't connect to the internet> Then If I try to reinstall it I get a network name (myrouter2) angain with a red x) and so on.
View 1 Replies View Related2 laptops and an iPad working off Belkin and Motorola router and modem. Now one laptop can no longer find the Belkin , yet the others can. When look up available connections on the non connected laptop all my neighbours are there but not mine! Friend visited me and her laptop picked up my Belkin and at her house my laptop picked up her wireless connecti. What to do. Have switched off and on. Tried Motorola Ethernet direct into laptop and that works. Have restored computer to 2 weeks ago. Lost now.
View 1 Replies View RelatedI don't have Internet access, and this is for both a wireless connection and connecting to the router with ethernet.I do have Internet access when connecting directly to my modem via ethernet
View 3 Replies View RelatedI can't access my ad sites through my internet. I can access them through my phone internet and others are not having any problems going to them
View 3 Replies View RelatedIm unable to use internet.My modem shows that it is connected but i kept on getting "Local Area Connection" doesn't have a valid IP configuration when i tried troubleshooting.
Windows IP ConfigurationHost Name . . . . . . . . . . . . : Jesmin-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
I am using Wireless DSL Router which connect through Modem..It shows the internet connection but cannot access through wireless even my Laptop is connect to router thru Wireless...Previously it was connected to internet through same router. Its work with direct LAN Connection if directly connect with MODEM. But after formating my laptop its connect to Router but can't get access to internet. I am using XP OS.
View 3 Replies View RelatedI cannot get internet access on my laptop as it keeps asking me to change to wep which my bthub3 wont allow
View 6 Replies View RelatedI live on residence at college. I started having internet problems (slow, choppy, cutting out) that eventually stopped a few days ago. Then recently (yesterday) The internet stopped working for everything but my browsers and Norton Internet Security. Steam, DC++, even Adobe updater can't connect. I have booted in safe mode (with networking) and had the same problem.
View 4 Replies View RelatedEmail OK but no Int't accessHave tried updating from WindowsXP CD but I still have no communication with my router when I move to Internet Explorer
View 16 Replies View Relatedhow to conntect an old PC to a wireless broadband home network. I had set up wireless broadband at home on a laptop. Next I added a second laptop to the network just by entering the password that I had used when first setting up the wireless service. This PC does not have a wireless adapter nor ethernet ports.if addition of a wireless adapter card into a vacant motherboard PCI slot would be sufficient to extend internet access to this PC.
View 5 Replies View RelatedI have intermittent internet access from a new laptop. When it works it is fast and consistent, but it seems there is a problem where I can sometimes start getting only part of an internet page, and then it stops downloading altogether.Below are ipconfig /all and ping tests and a screen shot of the device manager.A bit of background:1) There are 4 computers on the network, this laptop (samsung NP530) is the only one where internet is not working2) It is new, has avast installed as antivirus. Norton came with the laptop but I did not click on the button to activate it when it popped up on first opening3) A small strange thing: I get "SWMagent is restarting" message when I restart the computer. I don't know what this is.[CODE]
View 14 Replies View Relatedi have a laptop running windows xp sp2, i do PLC programming and often need to put an IP address into my pc, but i also often need to go on the internet,is there any way i can put an ip address in my laptop and also access the internet at the same time.I dont want to have to take out my IP address all the time to go on the internet.can i assign like a gateway or something?
View 4 Replies View RelatedOk so I am accessing the Internet by LAN cable hooked up to the (LAN slots?) on the motherboard.After a lightning strike, where there was once 2 yellow lights is now gone.Question is what needs to be replaced because the slots are on the mobo itself.
View 5 Replies View RelatedI would have liked to post on .html as I have a similar problem. My laptop allows me to connect to the wifi, but does not allow me to connect to the internet(can use ethernet but not wireless).[CODE]
View 11 Replies View Related