How Do The Tier 1 Network Providers Gets Bandwidth

Feb 13, 2013

Tier 2 and tier 3 purchase from tier 1 provider ,but how is bandwidth produced i mean how tier 1 provider gets bandwidth. and why tier 1 doesn't have to pay.

View 7 Replies


ADVERTISEMENT

Get A List Of Tier 1 ISPs?

Feb 12, 2013

How I can get a list of Tier 1 ISPs?

View 2 Replies View Related

Any MPLS Providers

Nov 7, 2012

We're looking at rolling out MPLS between each of our sites. probably more soon.Do you guys have favorite MPLS providers? How have your experiences been?

View 10 Replies View Related

Broadband :: Can Have 2 Internet Service Providers

Jun 16, 2011

Can I have 2 Internet providers?I've been with Orange broadband for a few months and it's been unusably slow, so we're cancelling the contract and changing to Sky. Orange are making us trouble-shoot before this can happen, so the preference would be to install Sky, leave the Orange router unplugged and ignore it until the contract ends. Is this realistic? I know both couldn't use the line at the same time, but could we just unplug our Orange router or would it create slow down or not work at all?

View 2 Replies View Related

Can't Validate The Winsock Base Providers - 2

Feb 12, 2012

I received a message stating: Info-error attempting to validate the winsock base providers:2 Error- Not all base service provider entries could be found in winsock catalog. A reset is needed. Info- Redirecting user to support call I did the reset in command prompt as I read you told other people with this problem to do. But I still keep getting these messages.This is my sister's Dell Latitude 620.I used AVG and I think pc is clean. When I try to connect to a website page states that Internet Explorer cannot display the webpage.

View 10 Replies View Related

D-Link DIR-655 :: Bridging Using Isp Providers Modem

Jul 27, 2011

I have some network experience but not a lot so here is my problem.I have a zyxel q1000z from qwest that i want to bridge to my dir 655.I go through the settings to put their router/modem to bridge mode. This units default ip is the same as tslinkink, 192.168.0.1 so i change the d-link to 192.168.0.2. I then go into the D-link and enter my isp's pppoe settings and password. I reboot when i am done but can't connect to the internet.It shows connected but that's it. I want to use the d-link as the only router as the zyxel has very few settings and has slowed down my netflix.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961NB / How To Add Other DDNS Providers

Jan 12, 2013

Region : Germany
Model : TD-W8961NB
Hardware Version : V1
Firmware Version : 1.0.0 Build 110707 Rel.32779
ISP : DTAG

would it be possible to add other DDNS providers to the router menu?E.g. I use dnsomatic.com as DDNS service (pretty much the same syntax/protocol as DynDNS, but free and more flexible).

View 2 Replies View Related

Linksys Wired Router :: RT341P2 Can't Use Voip Providers

Mar 10, 2012

I buy new Linksys RT341P2 router with Linksys - Firmware Version: 1.30.01. My voice ports are locked, and i can`t use voip providers. How to unlock and what i need to do?

View 1 Replies View Related

Linksys Wireless Router :: Wrt54gx - How To Change Internet Providers

Apr 5, 2012

have a wrt54gx and changed internet provider from cable to dsl. Can you let me know how to do this? I have a printer routed through the router.

View 1 Replies View Related

Linksys Wireless Router :: Any Free DDNS Providers That Can Be Used With EA6500

Dec 20, 2012

Is there any free DDNS providers that can be used with a EA6500 ?

View 3 Replies View Related

Linksys Wired Router :: RV082 Load Balancer Between 2 Providers

Feb 25, 2011

I have got Linksys RV082 in my home network to use it as load balancer between 2 providers.Is it possible to make some customisation in scenarioses and logging system? As I understand the device is based on some Linux core and Linux infracrtucture. So it must me available in sources... How I may get this kind of access? I want to get ssh/telnet or other raw access to installed on the device OS and manual control it, treat around web-UI. How may I do it?

View 1 Replies View Related

Dell :: D630 Broadband Facility Limited To Certain Service Providers?

Apr 27, 2013

is the dell d630 broadband facility limited to certain service providers coz im inserting my Econet simcard bt it still says no device detected

View 3 Replies View Related

Cisco Switching/Routing :: Default Gateway Of VOICE Providers 2600 Router

May 21, 2012

We have two MPLS circuits managed by two different suppliers, one carries VOICE the other DATAWe are to decommision the VOICE MPLS and have increased the bandwith of the DATA MPLS to carry VoIP traffic too. 

At both of our sites A & B ,devices connected to the LAN have a default gateway of the VOICE providers Cisco 2600 router , which then goes into the LAN switching. (see diagram)So what I am trying to achieve is toto simply replace these 2600 routers from the VOICE MPLS provider with our own so we dont have to change the default gateways at both sites. 
Testing
 
Our Cisco 2600 routes are plugged into each LAN switching environment with two subinterfaces configured, one for voip and the other for dataThe problem is from the router and respective subinterfaces we can get to the other sites destination without any issue, but if for example a user is at site A with Ip address 10.16.11.12/16 they cant ping the VOIP subnet at site B 10.3.11.0/24. But If a ping is issue from the Site A test router then the 10.3.11.0/24 subnet is reachable but only on the 10.3.12.0/24 configured subinterface.So i guess what Im saying is 10.16.0.0/16 from the LAN needs to be able to get to 10.3.11.0/24Note at site A 10.16.0.0/16 & 10.3.12.0/24 can communicate no problem and at site B 10.207.0.0/16 & 10.3.11.0/24 can communicate no problem.We are using IP routing, should we be using route-maps? 

View 15 Replies View Related

Why Is Network Using Up All The Bandwidth

Feb 8, 2011

We have a network of 20 computers here at work. We recently moved from using Outlook to Gmail for our email service. That change appears to have triggered a problem. No more than 5 computers at any given time can acccess the internet now.

View 5 Replies View Related

MAC 10.7 Monitoring Available Bandwidth On Network

Jul 18, 2013

I was wondering if there is a way to monitor the total bandwidth available at any given time? My ISP claims and is charging me for a certain amount of bandwidth but I suspect that during the day I am getting much less.

I would like to track available bandwidth continuously (or every 5, 10, 15 minutes) and log that data so I can show them the results. I'm on a Mac 10.7 but can use Windows XP also.

View 2 Replies View Related

Set Bandwidth Limits To Certain Devices On Network?

Mar 18, 2012

I've been having a bit of a problem lately trying to play Battlefield 3 on my PS3 when other computers are running on my network.

I'm looking for a program or method to set bandwidth limits on some devices to try to guarantee the PS3 enough bandwidth to play without lagging.

With the research I have done what I can find is that there is something called Quality of Service (QoS), and traffic shaping -- which are good and fine but I don't believe my Westell router supports them and I don't want to have to do anything crazy with my router.

Also I am currently dual booting Ubuntu Linux alongside Windows XP, and I don't have XP set up because I want to install Windows 7 on that partition once I can read DVDs (in the hardware forum), therefor I would really like to find a Linux program that I can use to shape my network traffic.

View 2 Replies View Related

Changing Bandwidth And Monitor How Much Used For Network

Feb 6, 2013

what part of active directory can you change your bandwith for the network and monitor how much bandwith is being used.

View 4 Replies View Related

Bandwidth Limiting On Home Network?

Jun 11, 2011

Without using another box as a router preferably. My Cisco Linksys router doesn't have any options for this but I heard you could possibly install some 3rd party firmware to get around that. This would be a last resort for me What I'm hoping for his some piece of software that could do this

View 2 Replies View Related

How To Minimize Network Bandwidth Usage

Jan 3, 2013

We run a small school and one of our campus sites is quite remote and our internet provider chares big dollars for internet downloads.One of our classes has just been upgraded to run over the internet and involves downloading 6Gig of video each time it is run. This will cost us approximatly $15 for each student and we have hunreds of student. We provide computers for this course work.

View 5 Replies View Related

Control Bandwidth Of Network Computers?

Aug 14, 2011

I want to control bandwidth of our computers in network. We are using TPLINK routers. I already done ipqos setting in the main router but it doesn't really effective. I also tried ipqos in the routers(which is used as WAP) but it also not effective.

View 8 Replies View Related

Bandwidth Test For 1 Mbps Bandwidth Line?

Sep 9, 2011

We have 1 mpbs bandwidth line, but most of the time we are getting only 300-500 kpbs download speed, i want to send statistics report to our ISP, what will be best procedure to test the bandwidth report, i have checked in some websites like bandwidthplace and speedtest but these sites are not accurate, how to check the actual bandwidth we getting from ISP against 1 Mbps. We have solarwinds monitoring tool in this i have configured the WAN interface for 1 mbps

View 5 Replies View Related

Home Network :: How To Limit Bandwidth On Wireless

Feb 26, 2011

Anyway, I have a cable connection with a modem and a D-Link wireless router. Some of the users are abusing the bandwidth, making it difficult for others to surf the net.What's the easiest way to set a bandwidth limit for each user? Also, it is possible to do it through the router as I don't want to keep my computer running the whole time?

View 4 Replies View Related

Using Bandwidth Of Multiple Users On A Proxy Network?

Jan 22, 2011

My college hostel has a broadband connection in each room, with individual servers, all of which are connected to a central server.Each hostel has a unique ip range(eg 10.3.14.1-10.3.14.255, and others like this, and students are allotted random ips). Each hostel has a particular proxy address that allows us to access the internand by low i mean, quite lowet, and each user has a fixed bandwidth(which is low). My question is, is there a way for one user of a particular hostel to use the bandwidth of multiple users of the same hostel(such that they are in the same ip range, and have the same proxy server for accessing the internet).i.e Is there a way for me to increase my bandwidth by using the bandwidths of other non allocated ips within the range of my hostel, such that with a single broadband connection, i can utilize the the unallocated bandwidth.

View 1 Replies View Related

Manage Bandwidth Allocation From Wifi Network?

Jul 29, 2011

I have an internet connection (landline and wifi modem) at my parent's summerhouse as I need it for work. Nobody else does around here so I get constant nagging from neighbours to give them the password. I can't say no however I'm afraid they may use up too much of my bandwith connection which could lead to alot of money being lost from my part. Constant and stable internet is a must for my work. how can I limit the bandwith I give to them? Can I create a second public network with limited bandwith or something like that?

View 5 Replies View Related

Increasing Bandwidth For Internal Network Not Internet?

Dec 4, 2012

ok i have setup a subnet on my uncles network on which i am running a domain with server 2008. i am using a dlink di 624 router and wanted to know if i upgraded to a 300mbps router would this increase the bandwidth within my network?i know i am limited to what i am receiving from my uncle who is also limited to what he is receiving from the ISP. im not worried about internet speed. i want to increase client to server speed for both lan and wireless.

View 1 Replies View Related

Cisco WAN :: 2851 - Update Bandwidth To A Network?

Feb 6, 2013

I am looking to add a new connection between a Cisco 2851 and a Cisco 3745.  Currently there are two T1 connections between them for a internal 192.168.5.0 network but I would like to add a ethernet connection to give a larger pipe for when transfering large files via that network.  Can I just add the ethernet to the multigroup and shut the ethernet connection down when not needed(to limit it to t1 speeds) or is there some other way of doing this?
 
[code]....

View 3 Replies View Related

Home Network :: Bandwidth In Adhoc Connection Between 3 Laptops

Jul 20, 2011

I have three laptops (running ubuntu with different kernel versions) with wireless adapter Intel Corporation PRO/Wireless 3945 ABG. Laptop A ----- Laptop B ----- Laptop CI created an adhoc connection in laptop A with: Essid: 'ad_hoc', IP address: 10.42.43.1, Subnet: 255.255.255.0, Gateway: 0.0.0.0, Now the laptops B and C can see the wireless connection 'ad_hoc' and I can connect to them after setting IP 10.42.43.1 and 10.42.43.2 respectively. So, I created the adhoc connection between 3 laptops. Now, I wanted to check the bandwidth between the different paths. The tool iperf was what I used for TCP bandwidth calculation. The bandwidth between A and B was around 4.5 Mbps , between A and C was around 4.0 Mbps but the bandwidth between B and C (B being server) was 677 kbps whereas C being server was 3.99. I don't understand how can the bandwidth drop so high when B was made the server. The system adapters are identical.

View 1 Replies View Related

Home Network :: ISP Bandwidth Throttling - How To Replace Modem

Sep 29, 2012

I think that my ISP is throttling my bandwidth at the modem . how access full available bandwidth.When the technician installed the fibre optic line and then the modem, he showed me an amazing 77MB/s (about 600Mbps) before the modem!!But after the technician left these were the test results after the router:

1) SpeedTests.net:

averages, after router, show: UP between 56/60Mbps & DN 45/75Mbps

2)Local Server Speed Test:

average: UP 45Mpbs & DN 170Mbps

A Japanese Internet savvy guy explained that NTT East throttles the available bandwidth at the building by specific apartment/modem settings related to individual contract bundles. I signed up for the top bundle: TV, Phone and Internet connections.This is my Hardware/ software setup:

OS: Win7,

Line specs:
Line type: IEC60874-14
Connector type: SC
Core across: 9 micrometers
Clad across: 125 micrometers
ITU-TG-652
NTT East fibreoptic TV/Internet/Telephone bundle (100Mbps best effort) Hikari Next Family Type but 10Mbps is considered within parameters
Asahi ISP Internet contract

Modem:
GE-PON (WAN+Coaxial TV antenna)
"SCM-GE-PON-<H>A GV-ONU D<1>" model

Router:
RT-S300HI (4 Giga ports + 1 phone)

Router & Modem have Japanese firmware which I cannot understand and, according to the NTT East, I must rent both modem and router from them and "will not support any other modem/router setup".I could not understand if it was because of technical or contractual limits.

I have tried to test my throughput after the modem but I could not figure out where the DNS, IP, WAN etc strings of numbers should go and, in the end, I simply cannot connect to the internet from my laptop directly to the modem so I cannot perform the same speed tests after the modem.

View 12 Replies View Related

WPN824v2 - Limit Bandwidth Of Computer On Wired Network?

Oct 17, 2011

Is it possible to limit the bandwidth of one Mac on a wired network (only medium is the Netgear router WPN824v2)?

Both are Mac. Mine is newest iMac. Other one is a MDD PowerMac. Both are OS X. Mine is Lion.

I need to be able to throttle the bandwidth of the other computer.

View 6 Replies View Related

Cisco LAN :: 2960S POE Switch - Monitor Network Bandwidth?

Aug 13, 2012

I have a cisco catalyst 2960-s PoE switch. I have a web access to the switch and am able to get statistics on each port. However, I am wondering if there is a way to have a diagram of the trafic on each port?
 
Also, what is the best way to monitor the trafic on a router ( i have a cisci 1811W)

View 9 Replies View Related

E4200v1 - Monitor Home Network / Internet Bandwidth?

Apr 7, 2013

I'm wondering if there is an easy way to monitor how much bandwidth is being consumed at any given moment for a home network.specifically, for the incoming/outgoing internet connection.My network is as thus:

DSL Modem -> Wifi Router (Linksys E4200v1 - PPPoE enabled here) -> Gigabit switch -> 2nd Wifi router (D-Link DIR-815 - DHCP disabled, repeats same SSID and password)

Most devices are connected directly into the switch, with one computer hard-plugged into the DIR-815 (I will eventually change this, as the 815 only has 10/100 ports).Basically, I want to easily be able to check how much up/down data is being sent for my internet connection. This means that I cannot use a program on a computer (I've used DL Meter before. Works great, but limited to a single computer).

The Linksys E4200v1 is using standard firmware, but I'm not opposed to loading DD-WRT onto it (was the original plan anyway, just never got around to it), if DD-WRT has this capability.Nice to have feature: Ability to see which devices are consuming what part of the bandwidth. Not necessary, but would be a cool feature.Alternatively, if there is a cheap (like $100 or less deal) box that can interface, say, between the E4200 and the switch, that can do this, that would work as well.

View 8 Replies View Related

Cisco Routers :: To Divide Network Limit Bandwidth On RW110

Jan 20, 2013

I have a problem with 2 users in the home network who overuse the internet. They constantly watch YouTube with Pandora turned on or other streaming content.We have RW110. How can I limit their bandwidth, so when they use the internet they do not block other users ?

View 1 Replies View Related

Linksys Wireless Router :: E2500 Guest Network Bandwidth Throttle?

Dec 30, 2012

I currently use a E2500 router for my home network. I have setup the Wireless guest Network for my downstairs Tenant while he is out of work so he can still have some internet. The problem however is that often the guest network will take up 90% of my 55mb/sec bandwidth, leaving none for the primary network. Is there a way for me to Throttle the amount of bandwidth the Guest network can use? Say alot 10mb/sec for Guest access only, and leave the rest for our main network?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved