How To Login To Multiple Computer With Current One
Jul 22, 2012
I currently have mutiple computers at my place. Once the computer turned on i want the option of which login for the current computer to use, it can login it current computer or the mutiples computer with their content/data all inside. So more like an computer linked. Example, it can only to A or B, A is the current computer data, while B have all the data of the different computer monitor datas, and if i login B it will show that current computer info. And same goes to the B computer, i can login to A or B on the B computer. What makes this very good is that, both the computer logins are sort of connected, for example if im on actual computer A, but logined to computer B and downloaded/changed some files/data on the B login, once i login on computer B to login B, the changes will apply even tho the changes are done in computer A.
I currently have mutiple computers at my place. Once the computer turned on i want the option of which login for the current computer to use, it can login it current computer or the mutiples computer with their content/data all inside. So more like an computer linked. Example, it can only to A or B, A is the current computer data, while B have all the data of the different computer monitor datas, and if i login B it will show that current computer info. And same goes to the B computer, i can login to A or B on the B computer. What makes this very good is that, both the computer logins are sort of connected, for example if im on actual computer A, but logined to computer B and downloaded/changed some files/data on the B login, once i login on computer B to login B, the changes will apply even tho the changes are done in computer A.
We have a secure ssid and a guest ssid. Is the a way to prompt for a single username and password and if that name is guest it will automatically connect to the guest ssid? If active directory user and password it will automatically use the secure ssid? we are using Microsoft NPS/Radius, 3502 ap's, and 5508 controller.
Whenever I try to login to the router, it fails to recognise the username and password for usually the first 5 or 6 attempts, then recognises them on the 6th or 7th. Not eactly a massive issue, but coupled with what seems to be a very unstable connection makes me wonder if it was a good move to buy cisco.
I have a facebook account for work and another one personal, and another one for my family, sometimes it's distrubing to log in into the 3 accounts at once, is there any solution how to log into the 3 accounts using a single Skype ID? or a chat webpage such as meebo before instant chat which acquired by google on the 11 of july 2012, I used to log in meebo using my 2 MSN accounts an 1 yahoo account at once, it was a great one indeed?
I have put my pc in work group from domain then it has restart then 1 user has displayed name is what is my pc name,but when i click on it, it become log off again, after so many try i haven't login. there is no any option for switch user.there is only option for shutdown,sleep & restart.
The computer that i am using which is on the LAN Setup. Also it is connected to the domain. Whenever i tried to log on to the computer it is giving me an error message that "The System could not log on the "Domain Name" either the connection is disconnected or the domain is no longer available" somting like that. When i remove the LAN Cable and if i enter the domain password, i can login to the computer. after i log on the computer if i connect the LAN Cable it is working fine. I can access the other computer which is connected to the same domain. Why the error message is poping up?
I have a DIR-615 router that I can not see the characters that you have to type just a read X on login screen on any computer running IE9 even the emulator on the dlink site shows this problem.
iam opening a cyber cafe next week.i have one computer (main server) which is connected to 5 monitors by an device named Ncomputing device and software.i have one cpu which is connected to others monitors.my question is how to see other 5 computer" s activity by my host pc?
Is there any way to make it so that my computer has two internet connections, so to my router it looks my computer is two separate computers, and would this increase my speed, since my router is made for up to 15 connections and has only 300mb/s to give out, so [would]each computer is[be] only limited to 20mb/s? As of now I have a dlink xtreme-n DWA-552 adapter in my computer.
I'm using a Linksys E1500 on my Timewarner 20Mbs connection and I've noticed that anytime another computer on my network connects my connection speed take a significant drop. This happens when Macs or PCs connect and there doesn't seem to be any common ground between any of them. In addition the connection is slow wether the other PCs are idle or downloading anything, it seems to make no difference. my ping in any game drops from 70 to 500 just for 2 other PC being on at the saem time on the network.
I have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.
I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
i have a wireless router on which my desktop with XP is connected to wirelessly. I want to add two laptops with windows 7 to the network what do I need to do?
I am thinking of setting up Wake-Up-LAN on my current desktop. The only problem is that I am using a wireless router, and it would be impossible for me to connect it with a cable. Would it be possible for me to use a wireless router? If not, would it be possible for me to use another router, connect it wirelessly to the original router, and connect that one with my desktop?
my laptop is conneted to the internet everything works,is there a way to show what the 8 characters are?(win xp)......for instance with win 7 there is simply a box to check that says SHOW CHARACTERS
I would like to add a second mifi 2200 to my current contract. (Same phone # & same bill.) That way I can use the second one while I'm on the road & my wife can use the first one at home!
Will Tomato retain all current settings on my router, or will I have to set it up again from scratch? If from scratch, is there an easier way to ensuring I get all my custom configurations, then from going screen to screen and writing it down? I do periodically back up the config - will Tomato recognize that file?
regarding Current Time Not Available. I loose internet connecting for hte last 5 weeks, My ISP is good. Bit I have noticed Current Time Not Available and when this happens my internet looses connection. but does state still connected. Using v1.0.03 build 001 Jun 11,2012 can we set manually the time?
I used mixed mesh 1510 and 1520. WLC version is 4.1.192.35M (Mesh).During 2year WLC is no problem. But, recently WLC's current client error.Normally user is 20. But, these day, user is 2500 and normal client is not assoiate.2500 user's status is probing and WLAN profile is unknown. probing client is not automatically disappear.We are locate isolated area. So, wireless user is a few. But, wired user is very many.after WLC reboot, status is OK.
We're running NCS 1.1.0.58. Since updating to this release from the 1.0 release, the 'Autonomous AP Client Status' and 'Lightweight Client Status' background tasks have been failing with message 'java.lang.NullPointerException'. I believe as a result of this that the 'Current Clients' tab on an AP monitoring screen just reports 'No data available'.
I would like to know what is exactly the current throughput of device? How can we calculate if the device is reaching it's throughput?
For example if router 7200VXR has maximum throughput of 520 mbps as per Cisco documents.
How can we measure if the traffic going through the device has reached maximum throughput. Is it the traffic only inbound traffic or the total of invound/outbound on all physical interfaces?
I have DSL, a firewall, patch panel and hubs.The network was already in place by three previous techs. I am not sure how the current setup is done there is no configuration map.The users in office 1 are all connected to a patch panel that then connects to hubs The second office users connect to a hub that then connects to the patch panel then connects to another hub.The internet is connected to a router that will be replaced with a firewall. Should it be setup like thisdsl modem > firewall > patch panel > hubs > Nodes
how to find the current logged on user on a domain network? I tried nbtscan but it gives me ip address, machine name and mac address. In the server column it gives <server> and in the user name column it give <unknown>.
I haven't been able to connect to the internet and every time i trouble shoot it gives me the following report "there-problem-driver-local-area-connection-adapter" what do i do
As part of my course, I have to install a brand new network, including cabling, setting up equipment etc in a room whilst ensuring that the current network system for that room is still running without any issue. How to do this as it includes taking out/changing the infrastructure in relation to cabling?
