How To Boot PC From LAN
Sep 23, 2011I Want To Boot PC From LAN.
View 2 Replies
ADVERTISEMENT
I Want To Boot My Network
Feb 13, 2011want to boot my network how can i do that?
View 1 Replies View RelatedHow To Boot From Another Computer's DVD ROM Via LAN
Apr 2, 2013I have a netbook, so it have not dvd drive. I haved usb flash drive, but now it not work. I want to install windows on my netbook, but i cant as there are no dvd drive and flash drive.But i have a PC computer, which have dvd drive.I want to know, that is it possible to boot my PC's dvd rom and install windows on my netbook.
View 14 Replies View RelatedCisco :: 6500 VSS - NAM Does Not Boot
Jun 21, 2011We have got a big problem with our NAM (WS-SVC-NAM-1) - it does not boot. We have got a second one and in an other chassis. I changed the chassis, and RAM and Flash from the other one. RAM and Flash are ok.
We checked the disc (hardware) with an Ontrack-tool -it is OK.
environment: 6500 VSS
sh logging:
Jun 17 13:18:24: SW1_SP: Switch 1 Physical Slot 7 - Module Type LINE_CARD inserted
sm(cygnus_oir_bay slot7), running yes, state wait_til_online
Last transition recorded: (offline)-> empty (remove)-> empty_clr_persist (remove)-> empty (insert)-> may_be_occupied (timer)-> occupied (known)-> can_power_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> check_power_on (power_on_ok)-> wait_til_online
Cisco WAN :: 1812 Usb IOS Boot?
Sep 29, 2011is it possible to boot the image from a usb stick on a 1812? if so, what are the requirements?
View 14 Replies View RelatedCisco WAN :: 2621 - IOS Boot
Aug 22, 2012I've got a Cisco 2621 with this IOS image in flash: c2600-i-mz.120-7.bin (the only IOS in flash). When I power up the router, the following errors occur:
open: file "n" not found
open(): Open Error = -1
loadprog: error - fileopen
boot: cannot load "flash:n"
I have to press "Ctr l" and "break" to enter Roman, there i can use the boot command to start the IOS. Configuration register is set to 0x2102, all running config should be factory default.
What I have to do to boot the IOS directly when i power up my router (without entering Roman mode...)?
Cisco :: Boot From Tftp Failing?
Aug 5, 2011I've got a fully working 877w that I'm trying to get to boot from tftp, but I just can't seem to get that going.I have a tftp server running and can copy images back and forth without any trouble.I have this in my config:boot-start-markerboot system tftp c870-advipservicesk9-mz.124-24.T2.bin 192.168.1.200boot-end-markerDuring the boot process I get an error message that says there is a missing or illegal ip but I really don't see how that can be as my tftp server is 192.168.1.200 just like my config says.
View 16 Replies View RelatedPC XP Slow Boot For Network Connections?
Jun 19, 2011XP slow boot for network connections When start PC it goes normal and quickly until comes to network icons in the right low window. It takes 5 minutes for network icons to show up.
View 2 Replies View RelatedServers :: Boot Over A Home Network?
Dec 31, 2011I am looking into setting up a home network for file sharing and backups. something I was wondering is can I install an operating system on the server computer and boot from it on multiple computers on my network? there are 2 unidentical desktop PC's and 2 laptops in my house I know alot about computer hardware and i am confident with individual computers but i have never used a home network before. in my bios there is a boot from network option. if i could i would use windows 7 professional as i am very familiar with it.
View 3 Replies View RelatedPC Not Connecting On Initial Boot But On Restart It Does
Jan 15, 2013My PC doesn't connect to internet on initial boot, says there is a disconnected cable. On a restart it finds the wirelss card and connects no problem to our BT hub. Tried disabling the wired option, tried a number of things around repairing links etc. but nothing works. it is annoying. PC spec below. Windows 7 is the OS
Giga byte mother board GA-Z68P-DS3
4x4gb of RAM
Intel i5 3.2 CPU
Radeon HD 6770 Graphics card
A wireless adapter TL-WN350GD
A 120 GB SSD hard drive
And a 1TB hard drive
A CnM card reader
Optical DVD drive too
Boot A New Hard Disk From Network?
Dec 18, 2012I have purchased a new hard disk, but my DVD ROM is dead. i have one another system. How can i boot the new hard disk from network..?
View 1 Replies View RelatedSharing :: How To Boot Users Off The Network
Oct 24, 2012I would like to know how i can boot other users off of the wifi network temporarily. How can i do this? Ive tried adding their mac address to the router admin, not sure if ive done it correct though, its a dlink login.Failing that is there any programs that can do this?? Ive come across one called wifijam but its only available for mac.
View 1 Replies View RelatedIntermittent Internet Connection New Boot Pc?
Dec 2, 2012I have build a new pc this week. All was fine offline. After connecting to the Internet initially everything loads quickly however sometimes after turning on my pc or restarting it the Internet just refuses to load. Pages take forever then I get a message unable to connect however the connection is still active and all my other devices work ipad etc. after a few times restarting or leaving it for a while all is fine.
View 1 Replies View RelatedBelkin N+ Wireless Router Won't Boot?
Mar 11, 2011I've had a Belkin N+ wireless router for about 5 months. I reset the router recently (using the reset option on the router itself) and now it doesn't boot up. The lights at the front flash as if its going through its boot sequence but it never stops. I left it for 2 hours while I went out and when I came back it was still going through the boot sequence.
View 3 Replies View RelatedInternet Connection On XP Dual Boot
Jan 19, 2013I am running Windows XP and Linux Ubuntu on dual boot.When I open into XP I cannot establish an ADSL internet connection, but can by wireless.If I open into Ubuntu I can establish both ADSL and Wireless internet.In Windows I have checked my Realtek Card in Device Manager - says working O.K.. When I try to open internet by ADSL the message is " trying to assign IP address " then limited or no connectivity" - if I try "Repair" message cannot establish IP address.Clearly something is blocking my connection.
View 17 Replies View RelatedCisco Wireless :: WLC AIR-CT2504-K9 Cannot Boot
Jun 5, 2013I have wlc AIR-CT2504-K9. After save config and power down, wlc cannot start. In console I see:
WLCNG Boot Loader Version 1.0.16 (Built on Feb 28 2011 at 13:14:54 by cisco)
Board Revision 0.0 (SN: PSZ163201YR, Type: AIR-CT2504-K9) (P)
Verifying boot loader integrity... OK.
OCTEON CN5230C-SCP pass 2.0, Core clock: 750 MHz, DDR clock: 330 MHz (660 Mhz da ta rate)
CPU Cores: 4
[Code].....
AAA/Identity/Nac :: ASC SE 1113 Boot Failure?
Sep 14, 2011i'm trying to re-image an asc se 1113 with a recovery cd but i keep getting a disk error complaining of an invalid destination drive
View 1 Replies View RelatedCisco Wireless :: Cannot Boot WLC 2106
Apr 20, 2010I have been trying to upgrade my WLC 2106, but it is stuck at rommon/grub mode.The steps are as follows
rommon #5> tftpdnldROMMON Variable Settings: ADDRESS=192.168.100.1 SERVER=192.168.100.10 GATEWAY=192.168.100.10 PORT=Ethernet0/0 VLAN=untagged IMAGE=AIR-WLC2100-K9-6-0-196-0.aes CONFIG=
[Code].....
Cisco Firewall :: WS-SVC-FWM-1-K9 Doesn't Boot
May 9, 2011I'm having an issue, with an WS-SVC-FWM-1-K9.
The card doesn't boot properly, it tries to boot, but after a while the 6500 puts it in shutdown.
I've noticed that it has 2 RJ45 ports in the board, I've plugged my console cable, but i only get characters with the default serial configuration.
Any information about the port configurations? Is the port "PC Console" the correct one?
Cisco Firewall :: ASA 5505 Is Not Boot Up
Jul 29, 2010My ASA5505 is not boot up. I did upload ios from rommon mode with tftp and tftpdnld.It is uploaded successfully after reboot it stopped at cisco logo sing.
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
I deleted old ios and upload new but look same.
Cisco Wireless :: 1131AG AP Not Able To Boot
May 31, 2012My AP 1131AG is not light weight mode and not able to boot. I have captured logs from consle port it stuck up after following error:
Xmodem file system is available.
flashfs[0]: 9 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
[Code].....
Cisco WAN :: 877 No Boot File / But Appears To Have IOS
Feb 7, 2013I have two 877's that have both reset with the following messages on boot, and dir of flash and lost+found/It appears that there is a IOS on the flash? but rommon doesn't know where it is. I tried to "set" with no luck as set is read.
I have noticed that the IOS is 0 size. [code]
Cisco Application :: NME-WAE-502-K9 Doesn't Want To Boot
Dec 16, 2012I have added a new NME-WAE-502-K9 in one of our remote Cisco 2811 routers. This module doesn´t boot, and it seems to be in a loop trying to boot. [code]
View 6 Replies View RelatedCisco :: 2800 - IOS TFTP Boot
Feb 6, 2012I need Cisco router 2800 series boot ios image from network(tftp), when flash is corrupted or router doesn't see it, so it is impossible ? Command, i used boot system tftp: ios.bin but this does not work.
View 9 Replies View RelatedCisco WAN :: Error On 1921 Boot-up?
Dec 11, 2012I purchased several 1921 routers and the last two I setup get the following error during bootup:
%SYS-6-READ_BOOTFILE_FAIL: tftp://255.255.255.255/1:aaa1386.bin No usable interfaces.
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
%MAINBOARD_GE-3-SHUTDOWN: FPA PKT pool holding 512 particles.boot of "1:aaa1386.
bin" using boot helper "usbflash0:c1900-universalk9-mz.SPA.151-4.M4.bin" failed
error returned: No usable interfaces
loadprog: error - on file open
boot: cannot load "1:aaa1386.bin"
The router moves on and eventually comes up fine and is operational. What this error is an if I can get rid of it?
Cisco :: 1841 - Router Won't Boot Up
Feb 24, 2012I have a problem with 1841 router - It wont't boot up and there is a message
Correcting primary nv_flash
Dell :: PXE Boot On M50 Precision Workstation?
Dec 23, 2003I am trying to do a PXE Boot with a M50 Precision Workstation. I have flashed my BIOS to A12. When I boot up, I get PC Boot Agent 4.31 and PXE 2.41. It starts to do the DHCP, however it errors out with the message:
PXE-E51: No DHCP or proxy DHCP offers were received.
Cisco WAN :: Error During Boot IOS On ASR1002?
Dec 27, 2011During the boot ios we found the error messages below. How can i clear this messages?
Missing or illegal ip address for variable DEFAULT_GATEWAY Using midplane macaddr
Missing or illegal ip address for variable IP_ADDRESS
Missing or illegal ip address for variable IP_SUBNET_MASK
Cisco WAN :: 1841 Boot Failure
May 18, 2011we have a problem with a Cisco 1841 router while booting. The router is loading the image from the CF card but gets stucked at this point:
This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be foundURL
Cisco Firewall :: Upgrade Pix 525 Boot Rom From 4.0 To 4.3?
Feb 22, 2012how to upgrade a Cisco Pix 525 boot rom from 4.0 to 4.3. Is it a physical chip or software upgrade? Is it needed to upgrade to latest IOS on Cisco Pix 525 to 8.0. Where can I find more information on it?
View 1 Replies View RelatedBroadband :: Verizon Network Extender Won't Boot Up
Sep 29, 2012cell phone extender req. 300kbps I have only 100mbps, they didn't mention min when I ordered it? Now they say that's the fastest broadband I can get due to distance from server &/or availability is what I have?
View 4 Replies View RelatedCisco :: Getting DHCP Client Messages On Boot
Apr 25, 2013I have a Cisco ASA 5505 I've configured as a DHCP server. I'm getting DHCP on workstations attached to the appliance, but I'm getting the following message when the appliance loads:DHCP Client: can't enable DHCP Client when DHCP Server/Relay is running on the interface DHCP: Interface 'inside' is currently configured as SERVER and cannot be changed to a CLIENT by a CLIENT featureI'm not trying to configure this thing as a client, so I'm not sure why the system is producing this message.
View 2 Replies View RelatedCisco :: Switch Power Usage On Boot?
Oct 11, 2011I have a customer who is concerned with the power draw on the new switches we're deploying.They only have 20 amp breakers in their closets and fear popping them on switch boot. The customer is under the impression that a switch will pull full power on boot. So a 3560X with an 1100w PSU will draw the full 1100w on startup. Ive never heard this and it doest make much sense to me, but I need to verify.
View 10 Replies View Related