How To Do Maintenance Work On The WIN2K3 Server
Nov 30, 2012
how to maintain my WIN2K3 server on good health?
I am handling a WIN2K3 server which has 11 clients connected to it and a back-up server, operating system of all clients are XP, and they are being used in a small office enviroment.
how to do maintenance work to keep my server running healthy
ADDITIONAL QUESTION:
1. Do i need to defrag the hard drive and network drives of the server?
2. How to verify if the connections if they are in healthy mode?
3. Is it advisable that when the office is close that i shutdown the servers so they can also rest?
4. Best way on how to schedule an automatic back-up or sync of hard drives on a separate hard drive that is only intended to be use for backing up of files.
View 6 Replies
ADVERTISEMENT
May 17, 2012
Setup/Config
1. 2 physical locations (sites). One has a STATIC IP for the WAN (S2), the other has DDNS for the WAN (S1)
2. Both sites face the Internet using RV110W routers. LAN IPs are Router1(192.168.1.1) and Router2(192.168.2.1)
3. A RRAS server is setup behind the S1 router and is negotiating all the VPN traffic. The S1 router is configured to allow VPN traffic through and the Firewall is forwarding TCP 1723 traffic to the VPN Desginated network adapter on the RRAS.
4. At S2, the router is configured without any VPN settings. I am going to have the workstations (all Win7Pro) use the built in VPN connection to connect with.
5. RRAS is configured to allow up to 10 VPN connections at once, and I have made sure it is configured properly.
Issue:At S2, I am able to connect a single workstation on the VPN server with no issue. However, when I try to connect another workstation on the VPN (I should say user) it never connects and it fails. I don't have a SS of the error code, but through my research, I determined that the VPN configuration is only allowing one VPN connection at a time to the S1 site. The issue then is, how can I make it so all the workstations/users can connect to the VPN at the same time?I am able to connect each workstation/user to the VPN individually one at a time, but I am unable to connect more than one VPN connection at a time.
View 1 Replies
View Related
May 19, 2011
Can open (url) in work computer but not at home - Message coming up at home that it will be closed for maintenance and that was last week and has since finished now as i can open site at work but not at home
View 1 Replies
View Related
Mar 10, 2011
Is there a security appliance available that provides anti-malware protection, firewall,r content filtering, etc, AND has no subscription or maintainance fee (or optional fees)?
View 1 Replies
View Related
Nov 18, 2012
What do I do if I cannot access the setup address IE 198.168.2.1?I use my N750DB as a network booster at home. It runs via ethernet cable from the main router. I used to be able to get on no problem and now, I just can't. I have spent 2 days trying to sort my internet problems.
View 4 Replies
View Related
Jul 3, 2012
I have few questions on FWSM software upgrade.
1) I could not find the availale maintenance software under software donwload section?
2) what is the maintenance software version required for fwsm 4.1.8 upgrade (this does not have on the release note) url...
3) what is the main difference when you upgrad fwsm using following two methods:
- Installing to the current application partition from the FWSM CLI
- Installing to any application partition from the maintenance partition
4) how can we verify the file integrity after copied from tftp/ftp server (because it does not support verify command as in IOS)
5) how can we see the copied files in the fwsm (it does not show with show flash or dir commands)
View 4 Replies
View Related
Jun 4, 2012
I just did small office transfer all their existing computers and equipment over to a new office site. They had new voice and data cables run, as well as patch panel and telephone and cable modem equipment set up in new office The private telephone tech requested that I port forward port 8000 to the telephone equipments' IP address He also requested that I provide the Office Static IP address to him My question is--am I opening this office's network up to any security risks by forwarding port 8000 to his telephone equipment's internal system IP address and providing him the actual Static IP address of the office Internet connection?
View 9 Replies
View Related
May 27, 2013
I have question regarding route reflector. In my MPLS core network ,we have two route reflectors. Two route reflectors and each PE routers are belonged to a peer group. Route reflectors are Cisco 7301. IOS 12.3. I have Hardware maintenace on one Routereflector. How can I do that without interupting the end customer trafic.
View 2 Replies
View Related
Oct 10, 2012
I am currently deciding which IOS to use for various catalyst 3560 models. Version 12.2(55)SE3 seems fitting for this case, but I cant find out when the 12.2SE reaches End of Software Maintenance. I have checked this link: urls...
Where do I get info on 12.2.SE?
View 5 Replies
View Related
Feb 13, 2013
I have two WLC version 7.3.101.0 with the standby unit having HA-SKU. I have tested the AP-SSO functionality without any problem in lab with direct connection on RP port between two WLC. Once I brought them into data centre in separate location (latency is less than 10ms between the two DC), the standby unity always went into maintenance mode. The booting process on standby unit went to maintenance mode as shown below:
Management Gateway and Peer Redundancy Management interface are not reachable.Entering maintenance mode.
I have checked on the core switches at 2 data centre that the two WLC RP ports are connected to same VLAN and it is spanned across MAN link (10GB and less than 10ms delay). The spanning tree on those ports are forwarding as well.I have rebooted the second unit but no luck.The interface between two DC is using MTU 9216 which I do not think would cause this issue.
View 14 Replies
View Related
Feb 10, 2013
custommer of mine tried to configure HA AP-SSO with two 5508 controllers. After rebooting the primary controller changed into Maintanence Mode. [code]
View 15 Replies
View Related
Oct 15, 2012
So the other day at work we had a small power outage which shut off our server. Upon trying to turn it back on we realised we needed a password, but none of us can remember what it is at all. Our server does not have a brand and is running on windows 2003. We really need to get around this password issue, and there is no way that we can recover it (mostly because we are not getting the option to) When we turn on the server it stops on the typical black screen with white writing and lists:
Booting 'Debian GNU/Linux, with Linux 2.6.32-5-amd64'
Loading Linux 2.6.32-5-amd64...
Loading initial ramdisk...
Loading, please wait
[code]....
View 2 Replies
View Related
Jun 3, 2012
I have a desktop that I have my Minecrarft Server on. It was working fine until I forwarded port 25565 to it, and now I cant use firefox or internet explorer. I can access the server from my other computer on the same network, but none of my friends can from their houses.
View 1 Replies
View Related
May 2, 2012
I work in a small group with a network server so we can share files and documents from computer to computer. I am trying to access this server on a new computer and am not having any luck finding instructions on how to do so. I don't need to sign in to the network (to gain access to internet browser, etc), I need to be able to add this computer to our server so I can view these folders & files on this new computer.
View 2 Replies
View Related
Nov 2, 2012
We have a 887VA and a dns/web/mail/ftp server behind (below address 192.168.99.100).
first problem I forwarded the necessary ports to the server address, but now the domain became invisible and all the above servers stops to respond.
second problem whenconfiguring a fixed ip addres on a PC with GW and DNS server the 887VA address no internet connection possible, but when put instead the route address in the dns the ISP dns address internet comes back.
Put this server on DMZ, so all services will be available from the outside? forth how to connect the route remotely (with putty)
This site is my only hope to succeed one day to manage this "black" box successfully. Below the running conf
! No configuration change since last restart
version 15.1
no service pad
[Code].....
View 9 Replies
View Related
Jun 4, 2013
Are there any best practices for preventative maintenance on Catalyst Chassis switches. Looking to build a PMI schedule for a customer. Or is there evidence not to perform it at all. Things like re-seating line cards, cleaning fan exhausts, etc.
View 1 Replies
View Related
May 17, 2011
I have several ports opened on my DIR-655 A3, pointing to specific ports on a NAS server i have on my network.
I've already try this:
- Reboot the router
- Erase all Virtual Server Settings and try open only one port
- Re-flash the router with latest European firmware - 1.34b05EU
View 11 Replies
View Related
Dec 6, 2011
I have an HP LJ4050 plugged right into one of the open LAN ports on my E4200 with a CAT6 cable. Can this router work as a LAN print server? I can't pull up the IP on a browser window or ping it successfully.The 4050 doesn't have USB capability and I don't want to use the parallel port on my PC unless I have to.If possible, I'd like to have wireless computers on the network be able to print to it as well.
View 5 Replies
View Related
Dec 12, 2011
WRVS4400N Where is the Server Certificate located to get the VPN Client to work?
View 2 Replies
View Related
Sep 14, 2011
We are in the process of upgrading our win2003 radius server with a new win2008 radius server. We have an ASA5520 and FWSM in 6509, using anyconnect client. This has worked fine until we introduced the win2008 radius server. When in the asdm on the asa, you can click on the new server and click test and authenticate ok with your AD credentials. But when try to use anyconnect on your laptop, it takes the credentials password and the accept certificate, but then fails with "anyconnect was not able to connect to specified gateway.." message, then "the secure gateway has rejected the connection attempt due to network connectivity issue...host or network is 0" message. We thought we setup the new radius the same way, obviously not. is therw an easy way to use debug on the firewalls to see what is wrong? looked in event logs on radius server, have not found anything.
View 2 Replies
View Related
May 28, 2012
I added some files to the hard drive which is connected to EA4500 by USB. I went to the Storage--Media Server Tab and clicked Scan All. I turned on the TV and pointed the DLNA Media Server at the hard drive.
The new files did not show up. They did show up a few hours later. Does the Scan button do anything?
View 3 Replies
View Related
Mar 5, 2012
On my new E4200v2, after I tried to move beyond the disappointment of Cisco removing Internet Access Policy entirely, I decided to give the stripped down Parental Controls a try.
Sadly, I didn't have any luck doing what I needed to do... block my Tivo's from accessing Youtube.
I enabled Parental Controls, Added the Target Devices (my Tivo's did show up), and added "Youtube.com" as blocked site #1. Saved. Entered the parental password when prompted. Even rebooted the router.
But Youtube wasn't blocked. So I added to the target list a non-Tivo device (a Macbook) for a reality check, and rebooted the router again... still no luck. Youtube still not blocked.
So then I started to wonder if their Parental Control depends somehow on the local DHCP server & Client list. Because my E4200 has DHCP Server = OFF (I have always used a Windows Server for DHCP).
I tried to call Linksys support to get this working, but after 45 mins, including escalation to senior engineer, they really were pretty useless (no real familiariarity with my problem) then they disconnected my call!
View 7 Replies
View Related
May 22, 2012
I'm trying to connect a Cisco 2811 using an octal cable to a Juniper MX480 console port.Since the distance between Cisco 2811 and router is 20ft, im using couplers and a straight-through cable for the lack of slack. This wiring doesnt work, however in another city it works going straight from the Cisco 2811 octal cable to the router since they are in the same rack.
View 4 Replies
View Related
Feb 11, 2012
With out using any server, will DHCP be configured in cisco 2950/2960 switch?I man cisco it self should work as a dhcp server also.
View 10 Replies
View Related
Jun 2, 2012
I was searching a lot , but I couldn't find any good example, how to configure DHCP server for our wireless clients on Cisco Autonomous AP. I'm looking for example how to configure Dot 11 radios and BVI interfaces.
I have no problem to configure DHCP server on BVI 1 and VLAN 1 ( native VLAN ) interfaces, but there is a problem with other BVI's and VLANs. Maybe this feature isn't supported? Maybe DHCP server feature is supported to work just with default BVI and native VLAN?
View 4 Replies
View Related
Jun 26, 2010
I am using ASA5520 with webvpn for file sharing. But recently we just upgraded the OS that accommodate file shared folder from win2003 R2 32bit to windows server 2008 R2 64bit. Now I have a problem with accessing file share by ASA webvpn, it appears error contacting host, we have tested the file shared of webvpn on the other OS windows 2003 and windows 2008, they are working on these OS except win2008 R2. Current the ASA OS version is 8.0(2). And the windows firewall has been disabed.
View 3 Replies
View Related
Jan 26, 2012
I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies
View Related
Sep 6, 2011
Is there any chance the Wireless Repeater mode work with WPA2-AES ?If not, which model of AP should I buy to connect it with my wap54g as Wireless Repeater?
View 4 Replies
View Related
Sep 2, 2011
I'm trying to set up my DIR-655 so I can use VPN to access my work PC. How can I set this up?
View 2 Replies
View Related
Nov 19, 2011
I have a DIR-655 B1 router. The firmware is 2.00 NA. Just to clarify, the DSi itself does work with WPA, but the games only work with WEP. I made a guest account and set it to WEP and it still does not work. I have tried making the main connection WEP as well, but when I go on the game and try it, it says it is WPA and not WEP. My friend has a DIR-655 as well, but the hardware and firmware version are different. Her games work flawlessly.
View 10 Replies
View Related
Jul 24, 2011
I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.
WAN ----- ISP Router ---------- FW ---------- LAN -------- Mail Server + Webmail
| (25) | (3000)
194.x.x.69 192.168.1.254 192.168.1.6
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?
View 2 Replies
View Related
Jan 10, 2013
i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
View 1 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
