How To Enter A WPA Key Without Prompting
Sep 26, 2012
The first time I tried to connect to a new secured wireless network, I was prompted to a WPA key but didn't have it to hand so clicked away. Now when I click on any secured network that is showing up as in range, I get an error message saying Windows cannot connect and the selected network may be out of range.
I can connect to an unsecured network and to the desired network via ethernet cable. Secured WiFi was working fine when I was at home but I'm now in a different country, don't know if that could affect it somehow.
View 1 Replies
ADVERTISEMENT
Aug 29, 2012
I have a cisco 1801 router that is not prompting for enable password.After loging into router thru telnet it puts direct into privelege mode without promting for enable password.Here is the configuration:
User Access Verification
Username: adminPassword:xxxxx#sh runBuilding configuration...
Current configuration : 2132 bytes!version 12.4service timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname xxxxxx!boot-start-markerboot-end-marker!enable password 7 022F0A5D0208063555692B!no aaa new-model!!dot11 syslog!!ip cefno ip dhcp use vrf connectedip dhcp excluded-address 192.168.0.1 192.168.0.10!ip dhcp pool LAN import all network 192.168.0.0 255.255.255.0 default-router 192.168.0.1!!!multilink bundle-name authenticated!!username admin privilege 15 password 7 112017031E1C02181Dusername user privilege 3 password 7 091D1C5A100B111B05051033!!archivelog config hidekeys!!!!!interface ATM0no ip addressno atm ilmi-keepalivepvc xxxxx
[code].....
View 7 Replies
View Related
Oct 4, 2011
I am having an issue with my Cisco 1231G access points. When I make a password change on either SSID I am broadcasting, any device I try to reconnect to the network on will not prompt for the new password. It will just say unable to connect to whatever network. The 1231G AP is using the 12.8 (8) JEA IOS version. I have had Apple, Android, and windows laptops all not ask to enter a new password. It's like the device is not recognizing that it has changed. Is this an IOS bug or a setting I have to check. I can attach a configuration if necessary.
View 6 Replies
View Related
Jun 26, 2011
I have a remote access VPN profile configured on an ASA 5540. This profile is almost identical to the same profiles configured on other ASA 5540. The profile is linked to Active Directory for authentication. For some reason, users are not being prompted for the domain name field when connecting to the firewall, on the other firewalls they get prompted for all three (user/pass/domain).
All the firewalls are running 8.0(4) 32. And the following is the configuration of the firewall that I am experiencing issues with:
ip local pool TESTVPN 10.244.124.1-10.244.127.254 mask 255.255.252.0
group-policy TESTCERT internal
group-policy TESTCERT attributes
banner value **** WARNING ****
banner value You are Now Successfully Connected (code)
View 1 Replies
View Related
Jan 27, 2013
I have setup my EA3500 for guest access however when my clients connect and start their browser they are never prompted for a password to continue their session. The browser times out. I can connect to the secured network by using the wireless password and the clients work.
I have the lastest firmware. I have a host of different clients, Kindle Fire HD, RIM Playbook, Windows 7 laptop. I have turned off guest account restarted, reconfigured and nothing changes. The browser always times out and the client is never prompted for a password. I bought this router because a friend that I visit has one so that visitors can use the internet...I know hers works, I have brought my Kindle along with me and connected to her Linksys router and it prompts for a password. I liked the feature so much I bought this one.
FYI. This router was replaced under warranty, I spent two days (I'm not kidding) on the phone with Linksys support trying to get the first one to work. I rebooted, reset to default, changed settings, tweaked, used different clients all with no effect so they replaced it.
View 9 Replies
View Related
Oct 30, 2012
I recently installed an RE1000, which seemed to be working fine. Then, on 3 PC's with no wireless adapter installed we began being prompted for user name and password for the wireless router. Once I unplugged to extender the problem went away. I know what you're thinking: Maybe I just think there's no wireless adapter on these PC's. NO, I looked in device manager and the only network adapter installed is the ethernet adapter. These are all 4+ year old machines with no hardware changes made to them. Wireless adapters are not necessarily standard issue on old towers--even on new towers. The Acer I'm using right now was purchased new in November 2011 and did not come with a wireless adapter installed.
View 3 Replies
View Related
Jul 5, 2011
my son's laptop suddenly stopped being able to conect to internet.My daughters and my laptop still work find.I thought if i could just re-enter wireless key it would work again.he has windows 7
View 2 Replies
View Related
Apr 20, 2011
The combination of the two line are successful and the internet is working with double speed. I can access all router from my PC but sometimes I have hard time accessing the modem pages. I am not sure the reason but I thing that when I request 192.168.2.1. the request might be sometimes taken to m2 modem , that's why the modem m1 is not found.
View 3 Replies
View Related
Jun 24, 2011
Lost my wifii security code - How to re-enter network security key
View 5 Replies
View Related
Jun 21, 2012
Why I can enter router login interface through 192.168.0.1 but can not enter through 192.168.1.1?
View 1 Replies
View Related
Nov 3, 2012
how to enter the 168,192,1,1 to set a passward to my wireless router
View 1 Replies
View Related
May 2, 2011
Not able to enter 10.12 series address in LAN PC
View 12 Replies
View Related
Feb 13, 2011
when I start the router , I can't enter the IOS , and it enther the ROMMON mode , the error display probably is : the flash is invalid.I want to import an new IOS into the flash, but it says the space is not enough.how I confirm the flash is broken?It's any other ways to solve this problem except to change the flash?
View 2 Replies
View Related
Aug 12, 2011
how to enter dos mode in a windows pc without still remaining in windows interface.
View 8 Replies
View Related
Feb 17, 2012
I've been through pages and pages of Google and Bing searches, and I've found plenty who have this issue, but none who seem to get it solved. Three computers, all running Windows 7 Home Premium 64-bit, are members of a Homegroup that functioned perfectly for more than a year until Tuesday of this week. On Tuesday, I installed Windows updates and also updated from Norton 360 v5 to v6.Computer A and B don't have password protected logins to Windows; Computer C is password protected. Until Tuesday, A and B have never been required to enter a password to access shared files and folders on C. Computer A still communicates fine in both directions with B and C, without having to enter C's Windows login credentials. B can be accessed by C, but when B attempts to access the C libraries that are shared by C to the Homegroup, the appropriate shared folders are shown (Documents, Pictures, etc.), but instead of their usual icons, the icons look like this: url... and if I try to click on them, I am prompted for a Network Password like this: url... The name following "Enter your network password to connect to:" is the name of C, and the "Domain" shown below the password block is the name of B. (Domains aren't even possible with Home Premium, are they?)
If I enter C's username and password I can access C from B, but upon rebooting B it starts all over again, even if I click "Remember my credentials." Sometimes I don't get the prompt and instead am told that I don't have permission to view
View 14 Replies
View Related
Feb 15, 2013
I changed my router from Belkin F5D 7633-4 (G) to Belkin F5D 8636-4 v2 (N) on the 7633 I was able to set up virtual server page and access my CCTV cameras remotely with no problem but on the 8636 with the same info into virtual servers page I get "No 1 WAN address is invalid".The format of the page is slightly different the 7633 required "inbound Port" number to be put in twice in different boxes side by side and the same with "Private Port".The 8636 has only one box to enter the port number under each heading.
View 3 Replies
View Related
Apr 8, 2011
I have just received my RV220W Small Business Router and I do not understand the manual/UI wrt VPN. In the past, I had a PPTP server running behind a NAT and I used Pass Through to get external clients (Macs) to connect to my local LAN. But now I would like to use the Cisco Router's VPN capabilities to set up VPN and shut down the PPTP server in my LAN.I have a couple of fixed IP addresses that end up on this router, wit ISP-based 'technical' domain names (e.g. foo.static.isp.com) with reverse lookup, so using those, I should be able to connect to my RV220W from the outside.
View 0 Replies
View Related
Nov 16, 2011
I have a Snapgear 560U VPN Gateway at the main office with VPN connections to several branch offices also using Snapgear 560U. Those are no longer manufactured though, so I bought a Cisco WRVS4400N for our new office. The main office has a fixed IP but the branch office ha a dynamic one. On the Snapgear's it is very clear where I need to enter the Mandatory endpoint name on the dynamic side of the tunnel, but I can't find anything on this on the Cisco WRVS4400N. So where do I enter this information so that I can make a VPN connection between the Snapgear & Cisco boxes?
View 1 Replies
View Related
Apr 4, 2012
I upgrade to a Flash 32mbs memory stick, as I reboot the 2600 Cisco router, it appear in the ROMMON mode, nonetheless, I followed some wrong procedure by changing components on the ROMMON command line. however now the router reboot or start with symbol only V2V2v2a, and I can no longer enter the ROMMON Mode or key anything in. I have a copy of the IOS on my TFTP server.
[Code]....
View 3 Replies
View Related
Nov 9, 2012
When i try to enter my wep password on a dell latitude d620, it only allows me to enter 8 numbers. The length of my password is 16 characters, consisting of letters and numbers. How can I enter my password?
View 5 Replies
View Related
Feb 13, 2011
I have been using the Cisco7613 and FlexWAN with PA-8E1-IMA PortAdapter.It has been used for ITP (SIGTRAN) Today, I attemted to enter the Port Adapter 13 1 module with using command that "attach" command.But I couldn't that. and I could see the Error Message below." RTTYC_ ATTACH_ REQ Failed with return code 2 , aborting". This Module (13 1) is working normal. but why cannot enter to the PA ?
View 3 Replies
View Related
Feb 25, 2013
I have been searching but unfortunately not successful in finding appropriate documentation on how to configure the ASA such that a user using AnyConnect SSL VPN client is prompted for their username + AD credentials + RSA SecurID token (all three must be presented/entered by the user) in separate fields before the VPN tunnel is established. On latest version of AnyConnect (3.1) and ASA version 9.x on 5500-X.
View 1 Replies
View Related
Sep 1, 2012
Have WBR-2310 D-Link router. Internet modem and wireless router were working. While trying to connect new wireless printer, lost internet connect. Had to re-enter internet provider user id and password. Was told I needed to make sure that information was in my D-link router, so I typed 192.168.0.1 as internet address. I don't get a webpage to enter the userid and password.
View 2 Replies
View Related
Mar 13, 2011
if I can enter their main page, I cannot enter individual sections. I will get this "This webpage is not available" error.The thing is that, both forums have been running smoothly for others but not me.Few days ago, the situation wasn't so bad. But when I using my ISP Proxy Address I can only access one of the 2 forums only. Hence, to access the other one, I would have to disable my ISP Proxy Address,Now, I can't. Even if I use Google DNS, I also cannot access the forums at all,Is my network screwed up ? But if it was screwed up, how come I can access to other forums but not these 2 ?
View 1 Replies
View Related
Jan 12, 2012
My laptop was fine until I got an I pad for Christmas. It took me two weeks to figure out how to get the I pad online...should have been minutes I am told.now my laptop is off and I can not get it back on line..
View 1 Replies
View Related
Apr 14, 2013
I set up a DIR-655 router for a friend 4 years ago and it's worked reliably with all of their equipment since. They have wireless printers, iMacs, pc laptops and iPhone 4S's, all connecting without any problems. Recently, they got an iPhone5 and it will not connect to their home wireless automatically, they have to re-enter the password each time. They've tested their iPhone 5 on other networks and they do not have to re-enter the password. Apple and ATT are blaming the router. I do not live near them and I'm going to have to facilitate them remotely. At this point, I believe their router is configured with WPA2, but I can't be sure. Which configuration will work with the iPhone 5, as well as their other, older, devices that have worked for 4 years
View 1 Replies
View Related
Aug 2, 2012
WAG120N, recently my ISP changed my user name, and it's now over 62 characters long, which means I can't just write it down on the basic setup page. Anybody knows if there's a way to enter a 68 character long user name?
View 1 Replies
View Related
Mar 10, 2013
After a lot of effort I got my wireless adapter to work like it should without security. I set WPA 2 level security on my WRT54GS wireless router and then went to access the router (set up as an access point) with the WPC54G ver 2 adapter on a Thinkpad T22, it says I have WEP encryption and I cannot enter the passphrase I used for the router. It does not let me select AES. It says to pick AES or TKIP, but TKIP is the only choice.
View 1 Replies
View Related
May 1, 2013
Interestingly enough I've seen about 3-4 posts with the exact same problem and yet not a single one is ever answered.. The task is simple:
"username USER password 5 SOMEPASS role network-admin"
It consistently outputs: "String failed to match token pattern at '^' marker." - always the carat is at the first character in whatever password I input. I've ensured passwords I input meet the conditions of "password strength-check" and I have also disabled this feature and repeated with numerous passwords to no effect.
View 7 Replies
View Related
Dec 12, 2012
I tired to upgrade the flash memory on my 871. I have tired to send single break and removing the flash card to drop the 871 to rommon. but no luck, all i get is the below error. I have try restart button on the back and get the same results. How to get the router into rommon mode so i can place the IOS on the flash ?
View 5 Replies
View Related
Jan 3, 2012
I have an ASA 5510 with IOS 8.4. I want that only authenticated active directory users can pass the firewall.
View 3 Replies
View Related
Jul 4, 2011
My customer's Protectlink license is set to expire in 2 weeks. I would like to enter the activation code I just obtained, but cannot find the link. When I go to the license page in the router, there is a link to renew, but that just takes me to the website to enter the new key code, then receive an activation code. There is not howver any link to enter the activation code. I assume that once the license actually expires, the activation link will then show up, but there must be a way to get to this page ahead of time.
View 3 Replies
View Related
Oct 19, 2011
I have a problem with a customer of mine. We have deployed two new WLC5508 running r7.0.116.0 and AP1142s, also WCS with r7.0.172. When we setup a "Guest Access" we ran into trouble.The problem is that we can associate to the SSID/AP and get an ip-adress. When we open the web- browser we do not get redirected to the virtual interface but instead the _hostname_ of the WLC. Like this: url...
I we manually replace "cisco6a19c4" with 1.1.1.1 it works as it should, the login page appears, we login and can access the internet.We have tested and disabled web-auth on the ssid an everything works, we can directly go out on the internet, DNS works without any problems. [code]Guest network (VLAN) is transfered from WLC via the trunk to the Cat4503 and then connected on a access-port to a separate broadband-router, then to the inetrnet.DHCP to guest-users from separate broadband-router which is def gwy and "DNS".On the virtual interfaces no hostname is configured.
View 6 Replies
View Related
